! Started logfile: J0107+1312_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:59 2019 obs J0107+1312_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0107+1312_S_2017_06_10_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.958201 visibilities/baseline/integration-bin. ! Found source: J0107+1312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 14488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0107+1312_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 442 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.843453Jy sigma=0.008271 ! Fit after self-cal, rms=0.836590Jy sigma=0.008207 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=6.96 mas, bpa=-6.591 degrees ! Estimated noise=872.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126264 Jy ! Component: 100 - total flux cleaned = 0.154301 Jy ! Total flux subtracted in 100 components = 0.154301 Jy ! Clean residual min=-0.006244 max=0.014406 Jy/beam ! Clean residual mean=0.000009 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.154301 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.154301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084676Jy sigma=0.000772 ! Fit after self-cal, rms=0.084666Jy sigma=0.000772 ! Inverting map ! Added new window around map position (-6.5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138258 Jy ! Component: 100 - total flux cleaned = 0.022934 Jy ! Total flux subtracted in 100 components = 0.022934 Jy ! Clean residual min=-0.005102 max=0.009546 Jy/beam ! Clean residual mean=0.000008 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.177235 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.177235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081289Jy sigma=0.000738 ! Fit after self-cal, rms=0.081146Jy sigma=0.000736 ! Inverting map ! Added new window around map position (-17, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102941 Jy ! Component: 100 - total flux cleaned = 0.0173902 Jy ! Total flux subtracted in 100 components = 0.0173902 Jy ! Clean residual min=-0.004525 max=0.005334 Jy/beam ! Clean residual mean=0.000007 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.194625 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 0.194625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079123Jy sigma=0.000715 ! Fit after self-cal, rms=0.079028Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=7.662 mas, bpa=-5.283 degrees ! Estimated noise=682.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00989611 Jy ! Component: 100 - total flux cleaned = 0.0170124 Jy ! Component: 150 - total flux cleaned = 0.0225391 Jy ! Component: 200 - total flux cleaned = 0.0269636 Jy ! Total flux subtracted in 200 components = 0.0269636 Jy ! Clean residual min=-0.004045 max=0.004268 Jy/beam ! Clean residual mean=-0.000004 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.221589 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 105 components and 0.221589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077275Jy sigma=0.000697 ! Fit after self-cal, rms=0.077158Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.93 HN 0.99 KP 1.00 ! LA 0.98 MK 1.04 NL 0.91 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.01 KP 0.96 ! LA 0.95 MK 1.03 NL 1.07 OV 1.05 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.99 KP 0.96 ! LA 0.98 MK 1.01 NL 1.03 OV 0.95 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.98 KP 1.00* ! LA 0.80 MK 1.01 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.077158Jy sigma=0.000696 ! Fit after self-cal, rms=0.075336Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=7.735 mas, bpa=-5.242 degrees ! Estimated noise=674.625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339857 Jy ! Component: 100 - total flux cleaned = 0.00521465 Jy ! Component: 150 - total flux cleaned = 0.00621482 Jy ! Component: 200 - total flux cleaned = 0.00698425 Jy ! Total flux subtracted in 200 components = 0.00698425 Jy ! Clean residual min=-0.004180 max=0.003516 Jy/beam ! Clean residual mean=0.000003 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.228573 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 126 components and 0.228573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075135Jy sigma=0.000686 ! Fit after self-cal, rms=0.075109Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075109Jy sigma=0.000686 ! Fit after self-cal, rms=0.072685Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.753 mas, bpa=-5.391 degrees ! Estimated noise=679.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228131 Jy ! Component: 100 - total flux cleaned = 0.00292544 Jy ! Component: 150 - total flux cleaned = 0.00310803 Jy ! Component: 200 - total flux cleaned = 0.00322999 Jy ! Total flux subtracted in 200 components = 0.00322999 Jy ! Clean residual min=-0.002144 max=0.002386 Jy/beam ! Clean residual mean=0.000001 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.231803 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 150 components and 0.231803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072601Jy sigma=0.000666 ! Fit after self-cal, rms=0.072611Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-55, 56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221412 Jy ! Component: 100 - total flux cleaned = 0.00312952 Jy ! Component: 150 - total flux cleaned = 0.00346829 Jy ! Component: 200 - total flux cleaned = 0.00365148 Jy ! Total flux subtracted in 200 components = 0.00365148 Jy ! Clean residual min=-0.001921 max=0.002011 Jy/beam ! Clean residual mean=0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.235454 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 169 components and 0.235454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072529Jy sigma=0.000665 ! Fit after self-cal, rms=0.072523Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072523Jy sigma=0.000665 ! Fit after self-cal, rms=0.072007Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=7.735 mas, bpa=-5.385 degrees ! Estimated noise=676.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000883758 Jy ! Component: 100 - total flux cleaned = 0.00123094 Jy ! Component: 150 - total flux cleaned = 0.00148895 Jy ! Component: 200 - total flux cleaned = 0.0016583 Jy ! Total flux subtracted in 200 components = 0.0016583 Jy ! Clean residual min=-0.001553 max=0.001680 Jy/beam ! Clean residual mean=-0.000000 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.237113 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 181 components and 0.237113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071974Jy sigma=0.000663 ! Fit after self-cal, rms=0.071970Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194949 Jy ! Component: 100 - total flux cleaned = 0.000347221 Jy ! Component: 150 - total flux cleaned = 0.000487336 Jy ! Component: 200 - total flux cleaned = 0.000618055 Jy ! Total flux subtracted in 200 components = 0.000618055 Jy ! Clean residual min=-0.001551 max=0.001591 Jy/beam ! Clean residual mean=-0.000000 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.237731 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 189 components and 0.237731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071955Jy sigma=0.000662 ! Fit after self-cal, rms=0.071954Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071954Jy sigma=0.000662 ! Fit after self-cal, rms=0.071984Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.414 mas, bmaj=11.42 mas, bpa=-6.8 degrees ! Estimated noise=842.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137293 Jy ! Component: 100 - total flux cleaned = 0.00207147 Jy ! Component: 150 - total flux cleaned = 0.0021867 Jy ! Component: 200 - total flux cleaned = 0.00224261 Jy ! Total flux subtracted in 200 components = 0.00224261 Jy ! Clean residual min=-0.001582 max=0.001859 Jy/beam ! Clean residual mean=0.000000 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.239973 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 197 components and 0.239973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071984Jy sigma=0.000662 ! Fit after self-cal, rms=0.071982Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017649 Jy ! Component: 100 - total flux cleaned = 0.000160729 Jy ! Component: 150 - total flux cleaned = 0.000146821 Jy ! Component: 200 - total flux cleaned = 0.000146823 Jy ! Total flux subtracted in 200 components = 0.000146823 Jy ! Clean residual min=-0.001570 max=0.001868 Jy/beam ! Clean residual mean=0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.24012 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 210 components and 0.24012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071982Jy sigma=0.000662 ! Fit after self-cal, rms=0.071981Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.736 mas, bpa=-5.408 degrees ! Estimated noise=676.671 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.736 at -5.408 degrees (North through East) ! Clean map min=-0.0014354 max=0.16142 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=7.026 mas, bpa=-6.719 degrees ! Estimated noise=867.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125053 Jy ! Component: 100 - total flux cleaned = 0.155047 Jy ! Component: 150 - total flux cleaned = 0.169941 Jy ! Component: 200 - total flux cleaned = 0.180862 Jy ! Total flux subtracted in 200 components = 0.180862 Jy ! Clean residual min=-0.003611 max=0.006337 Jy/beam ! Clean residual mean=0.000005 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.180862 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.180862 Jy ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.736 mas, bpa=-5.408 degrees ! Estimated noise=676.671 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012676 Jy ! Component: 100 - total flux cleaned = 0.0218224 Jy ! Component: 150 - total flux cleaned = 0.0286092 Jy ! Component: 200 - total flux cleaned = 0.0337657 Jy ! Total flux subtracted in 200 components = 0.0337657 Jy ! Clean residual min=-0.002447 max=0.003870 Jy/beam ! Clean residual mean=-0.000004 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.214627 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 68 components and 0.214627 Jy ! Inverting map ! Added new window around map position (-12, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424215 Jy ! Component: 100 - total flux cleaned = 0.00754916 Jy ! Component: 150 - total flux cleaned = 0.0102467 Jy ! Component: 200 - total flux cleaned = 0.012498 Jy ! Total flux subtracted in 200 components = 0.012498 Jy ! Clean residual min=-0.001888 max=0.002037 Jy/beam ! Clean residual mean=-0.000002 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.227125 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 120 components and 0.227125 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.414 mas, bmaj=11.42 mas, bpa=-6.8 degrees ! Estimated noise=842.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345821 Jy ! Component: 100 - total flux cleaned = 0.00591369 Jy ! Component: 150 - total flux cleaned = 0.00778588 Jy ! Component: 200 - total flux cleaned = 0.00923501 Jy ! Total flux subtracted in 200 components = 0.00923501 Jy ! Clean residual min=-0.001784 max=0.001987 Jy/beam ! Clean residual mean=-0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.23636 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011368 Jy ! Component: 100 - total flux cleaned = 0.00166076 Jy ! Component: 150 - total flux cleaned = 0.00208014 Jy ! Component: 200 - total flux cleaned = 0.00244404 Jy ! Total flux subtracted in 200 components = 0.00244404 Jy ! Clean residual min=-0.001532 max=0.001855 Jy/beam ! Clean residual mean=-0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.238804 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 188 components and 0.238804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.736 mas, bpa=-5.408 degrees ! Estimated noise=676.671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6978e-05 Jy ! Component: 100 - total flux cleaned = 0.00020159 Jy ! Component: 150 - total flux cleaned = 0.000341014 Jy ! Component: 200 - total flux cleaned = 0.000436832 Jy ! Total flux subtracted in 200 components = 0.000436832 Jy ! Clean residual min=-0.001612 max=0.001563 Jy/beam ! Clean residual mean=-0.000000 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.239241 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 209 components and 0.239241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071957Jy sigma=0.000662 ! Fit after self-cal, rms=0.071950Jy sigma=0.000662 wmodel J0107+1312_S_2017_06_10_pus_map.mod ! Writing 209 model components to file: J0107+1312_S_2017_06_10_pus_map.mod wobs J0107+1312_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0107+1312_S_2017_06_10_pus_uvs.fits wwins J0107+1312_S_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0107+1312_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239801 Jy ! Component: 100 - total flux cleaned = 0.000401876 Jy ! Component: 150 - total flux cleaned = 0.000454017 Jy ! Component: 200 - total flux cleaned = 0.000577861 Jy ! Component: 250 - total flux cleaned = 0.000554193 Jy ! Component: 300 - total flux cleaned = 0.000507346 Jy ! Component: 350 - total flux cleaned = 0.000438739 Jy ! Component: 400 - total flux cleaned = 0.00034977 Jy ! Component: 450 - total flux cleaned = 0.000240935 Jy ! Component: 500 - total flux cleaned = 0.000134756 Jy ! Component: 550 - total flux cleaned = -1.17278e-05 Jy ! Component: 600 - total flux cleaned = -0.000155939 Jy ! Component: 650 - total flux cleaned = -0.000257776 Jy ! Component: 700 - total flux cleaned = -0.000418086 Jy ! Component: 750 - total flux cleaned = -0.00057554 Jy ! Component: 800 - total flux cleaned = -0.000614423 Jy ! Component: 850 - total flux cleaned = -0.000729251 Jy ! Component: 900 - total flux cleaned = -0.000786112 Jy ! Component: 950 - total flux cleaned = -0.000823595 Jy ! Component: 1000 - total flux cleaned = -0.000879054 Jy ! Component: 1050 - total flux cleaned = -0.000933685 Jy ! Component: 1100 - total flux cleaned = -0.00104168 Jy ! Component: 1150 - total flux cleaned = -0.00105933 Jy ! Component: 1200 - total flux cleaned = -0.00113019 Jy ! Component: 1250 - total flux cleaned = -0.00123523 Jy ! Component: 1300 - total flux cleaned = -0.00133885 Jy ! Component: 1350 - total flux cleaned = -0.00138995 Jy ! Component: 1400 - total flux cleaned = -0.0014407 Jy ! Component: 1450 - total flux cleaned = -0.00152474 Jy ! Component: 1500 - total flux cleaned = -0.00164142 Jy ! Component: 1550 - total flux cleaned = -0.0016743 Jy ! Component: 1600 - total flux cleaned = -0.00170747 Jy ! Component: 1650 - total flux cleaned = -0.00183741 Jy ! Component: 1700 - total flux cleaned = -0.00191789 Jy ! Component: 1750 - total flux cleaned = -0.00193393 Jy ! Component: 1800 - total flux cleaned = -0.002029 Jy ! Component: 1850 - total flux cleaned = -0.00210748 Jy ! Component: 1900 - total flux cleaned = -0.0021698 Jy ! Component: 1950 - total flux cleaned = -0.00215444 Jy ! Component: 2000 - total flux cleaned = -0.00226174 Jy ! Component: 2050 - total flux cleaned = -0.00227698 Jy ! Component: 2100 - total flux cleaned = -0.00232237 Jy ! Component: 2150 - total flux cleaned = -0.0023973 Jy ! Component: 2200 - total flux cleaned = -0.0023974 Jy ! Component: 2250 - total flux cleaned = -0.00242689 Jy ! Component: 2300 - total flux cleaned = -0.0024561 Jy ! Component: 2350 - total flux cleaned = -0.00245597 Jy ! Component: 2400 - total flux cleaned = -0.00249925 Jy ! Component: 2450 - total flux cleaned = -0.00248471 Jy ! Component: 2500 - total flux cleaned = -0.00257031 Jy ! Component: 2550 - total flux cleaned = -0.00255603 Jy ! Component: 2600 - total flux cleaned = -0.00255583 Jy ! Component: 2650 - total flux cleaned = -0.00254191 Jy ! Component: 2700 - total flux cleaned = -0.00265297 Jy ! Component: 2750 - total flux cleaned = -0.00259786 Jy ! Component: 2800 - total flux cleaned = -0.00262538 Jy ! Component: 2850 - total flux cleaned = -0.00269354 Jy ! Component: 2900 - total flux cleaned = -0.00272051 Jy ! Component: 2950 - total flux cleaned = -0.00268021 Jy ! Component: 3000 - total flux cleaned = -0.0027337 Jy ! Component: 3050 - total flux cleaned = -0.00269404 Jy ! Component: 3100 - total flux cleaned = -0.00273367 Jy ! Component: 3150 - total flux cleaned = -0.00278619 Jy ! Component: 3200 - total flux cleaned = -0.00281214 Jy ! Component: 3250 - total flux cleaned = -0.00278618 Jy ! Component: 3300 - total flux cleaned = -0.00278617 Jy ! Component: 3350 - total flux cleaned = -0.0028629 Jy ! Component: 3400 - total flux cleaned = -0.00281221 Jy ! Component: 3450 - total flux cleaned = -0.00282482 Jy ! Component: 3500 - total flux cleaned = -0.00281212 Jy ! Component: 3550 - total flux cleaned = -0.002787 Jy ! Component: 3600 - total flux cleaned = -0.00278716 Jy ! Component: 3650 - total flux cleaned = -0.00281184 Jy ! Component: 3700 - total flux cleaned = -0.002824 Jy ! Component: 3750 - total flux cleaned = -0.00284842 Jy ! Component: 3800 - total flux cleaned = -0.00281175 Jy ! Component: 3850 - total flux cleaned = -0.00281181 Jy ! Component: 3900 - total flux cleaned = -0.00282376 Jy ! Component: 3950 - total flux cleaned = -0.00281174 Jy ! Component: 4000 - total flux cleaned = -0.00285901 Jy ! Component: 4050 - total flux cleaned = -0.00284727 Jy ! Total flux subtracted in 4096 components = -0.00277674 Jy ! Clean residual min=-0.000912 max=0.000797 Jy/beam ! Clean residual mean=0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.236465 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 538 components and 0.236465 Jy ![Exited script file: muppet] wmap "J0107+1312_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.736 at -5.408 degrees (North through East) ! Clean map min=-0.0012507 max=0.16138 Jy/beam ! Writing clean map to FITS file: J0107+1312_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.161378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224422 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.417199 0.417199 0.834397 1.66879 3.33759 6.67518 13.3504 26.7007 53.4014 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.161 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.736 at -5.408 degrees (North through East) ! Clean map min=-0.0012507 max=0.16138 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0107+1312_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:41:05 2019