! Started logfile: J0106-4034_S_2017_08_12_pus_uvs.log on Fri May 10 14:49:16 2019 obs J0106-4034_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.317949 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.368002Jy sigma=0.002307 ! Fit after self-cal, rms=0.341745Jy sigma=0.002149 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.164 mas, bmaj=6.358 mas, bpa=-2.525 degrees ! Estimated noise=5413.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.522333 Jy ! Component: 100 - total flux cleaned = 0.639834 Jy ! Total flux subtracted in 100 components = 0.639834 Jy ! Clean residual min=-0.021963 max=0.042063 Jy/beam ! Clean residual mean=-0.000387 rms=0.009065 Jy/beam ! Combined flux in latest and established models = 0.639834 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.639834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126934Jy sigma=0.000777 ! Fit after self-cal, rms=0.126930Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=7.138 mas, bpa=-3.914 degrees ! Estimated noise=4804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463543 Jy ! Component: 100 - total flux cleaned = 0.0641468 Jy ! Component: 150 - total flux cleaned = 0.0730328 Jy ! Component: 200 - total flux cleaned = 0.0778812 Jy ! Total flux subtracted in 200 components = 0.0778812 Jy ! Clean residual min=-0.016291 max=0.011218 Jy/beam ! Clean residual mean=-0.000260 rms=0.004195 Jy/beam ! Combined flux in latest and established models = 0.717715 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.717715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110876Jy sigma=0.000684 ! Fit after self-cal, rms=0.110877Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.07 ! LA 1.00 MK 1.01 NL 1.00* OV 1.04 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.95 MK 0.98 NL 1.00* OV 1.03 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.93 MK 1.02 NL 1.00* OV 0.97 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.110877Jy sigma=0.000684 ! Fit after self-cal, rms=0.104555Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.516 mas, bmaj=7.141 mas, bpa=-3.937 degrees ! Estimated noise=4789.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761697 Jy ! Component: 100 - total flux cleaned = 0.000738413 Jy ! Component: 150 - total flux cleaned = 0.000715793 Jy ! Component: 200 - total flux cleaned = 0.000676494 Jy ! Total flux subtracted in 200 components = 0.000676494 Jy ! Clean residual min=-0.009388 max=0.008985 Jy/beam ! Clean residual mean=-0.000032 rms=0.002842 Jy/beam ! Combined flux in latest and established models = 0.718391 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.718391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104539Jy sigma=0.000647 ! Fit after self-cal, rms=0.104545Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104545Jy sigma=0.000647 ! Fit after self-cal, rms=0.104523Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.14 mas, bpa=-3.931 degrees ! Estimated noise=4788.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307647 Jy ! Component: 100 - total flux cleaned = 0.000263481 Jy ! Component: 150 - total flux cleaned = 0.000250236 Jy ! Component: 200 - total flux cleaned = 0.000237304 Jy ! Total flux subtracted in 200 components = 0.000237304 Jy ! Clean residual min=-0.009359 max=0.009021 Jy/beam ! Clean residual mean=-0.000032 rms=0.002842 Jy/beam ! Combined flux in latest and established models = 0.718629 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.718629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104517Jy sigma=0.000647 ! Fit after self-cal, rms=0.104518Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.23006e-05 Jy ! Component: 100 - total flux cleaned = 2.78812e-05 Jy ! Component: 150 - total flux cleaned = 1.50551e-05 Jy ! Component: 200 - total flux cleaned = 2.80746e-06 Jy ! Total flux subtracted in 200 components = 2.80746e-06 Jy ! Clean residual min=-0.009355 max=0.009013 Jy/beam ! Clean residual mean=-0.000031 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 0.718631 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.718631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104514Jy sigma=0.000647 ! Fit after self-cal, rms=0.104516Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104516Jy sigma=0.000647 ! Fit after self-cal, rms=0.104516Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.14 mas, bpa=-3.926 degrees ! Estimated noise=4788.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.12673e-05 Jy ! Component: 100 - total flux cleaned = 6.21477e-05 Jy ! Component: 150 - total flux cleaned = 6.16647e-05 Jy ! Component: 200 - total flux cleaned = 5.07371e-05 Jy ! Total flux subtracted in 200 components = 5.07371e-05 Jy ! Clean residual min=-0.009334 max=0.009022 Jy/beam ! Clean residual mean=-0.000031 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 0.718682 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.718682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104512Jy sigma=0.000647 ! Fit after self-cal, rms=0.104514Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.7142e-06 Jy ! Component: 100 - total flux cleaned = -7.569e-06 Jy ! Component: 150 - total flux cleaned = -8.18069e-06 Jy ! Component: 200 - total flux cleaned = -7.75651e-06 Jy ! Total flux subtracted in 200 components = -7.75651e-06 Jy ! Clean residual min=-0.009328 max=0.009028 Jy/beam ! Clean residual mean=-0.000031 rms=0.002840 Jy/beam ! Combined flux in latest and established models = 0.718674 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.718674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104510Jy sigma=0.000647 ! Fit after self-cal, rms=0.104512Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104512Jy sigma=0.000647 ! Fit after self-cal, rms=0.104526Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.562 mas, bmaj=26.39 mas, bpa=-6.821 degrees ! Estimated noise=7170.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314706 Jy ! Component: 100 - total flux cleaned = -0.000315904 Jy ! Component: 150 - total flux cleaned = -0.000316697 Jy ! Component: 200 - total flux cleaned = -0.000316452 Jy ! Total flux subtracted in 200 components = -0.000316452 Jy ! Clean residual min=-0.010061 max=0.011077 Jy/beam ! Clean residual mean=-0.000081 rms=0.004768 Jy/beam ! Combined flux in latest and established models = 0.718358 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 68 components and 0.718358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104535Jy sigma=0.000647 ! Fit after self-cal, rms=0.104526Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.36536e-06 Jy ! Component: 100 - total flux cleaned = 2.22251e-06 Jy ! Component: 150 - total flux cleaned = 1.54782e-06 Jy ! Component: 200 - total flux cleaned = 1.08163e-06 Jy ! Total flux subtracted in 200 components = 1.08163e-06 Jy ! Clean residual min=-0.010040 max=0.011069 Jy/beam ! Clean residual mean=-0.000081 rms=0.004764 Jy/beam ! Combined flux in latest and established models = 0.718359 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 68 components and 0.718359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104536Jy sigma=0.000647 ! Fit after self-cal, rms=0.104528Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.14 mas, bpa=-3.922 degrees ! Estimated noise=4789.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.515 x 7.14 at -3.922 degrees (North through East) ! Clean map min=-0.0090345 max=0.67189 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104528Jy sigma=0.000647 ! Fit after self-cal, rms=0.093178Jy sigma=0.000566 ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.141 mas, bpa=-3.915 degrees ! Estimated noise=4788.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238596 Jy ! Component: 100 - total flux cleaned = -0.000252062 Jy ! Component: 150 - total flux cleaned = -0.000253062 Jy ! Component: 200 - total flux cleaned = -0.000251788 Jy ! Total flux subtracted in 200 components = -0.000251788 Jy ! Clean residual min=-0.009231 max=0.008957 Jy/beam ! Clean residual mean=-0.000038 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 0.718107 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 69 components and 0.718107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093172Jy sigma=0.000566 ! Fit after self-cal, rms=0.093174Jy sigma=0.000566 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.85584e-06 Jy ! Component: 100 - total flux cleaned = 5.87949e-06 Jy ! Component: 150 - total flux cleaned = 1.69398e-05 Jy ! Component: 200 - total flux cleaned = 1.85793e-05 Jy ! Total flux subtracted in 200 components = 1.85793e-05 Jy ! Clean residual min=-0.009225 max=0.008954 Jy/beam ! Clean residual mean=-0.000038 rms=0.002801 Jy/beam ! Combined flux in latest and established models = 0.718126 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.718126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093170Jy sigma=0.000566 ! Fit after self-cal, rms=0.093172Jy sigma=0.000566 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093172Jy sigma=0.000566 ! Fit after self-cal, rms=0.093189Jy sigma=0.000566 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.17 mas, bmaj=6.371 mas, bpa=-2.419 degrees ! Estimated noise=5403.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.521306 Jy ! Component: 100 - total flux cleaned = 0.637401 Jy ! Component: 150 - total flux cleaned = 0.67669 Jy ! Component: 200 - total flux cleaned = 0.692775 Jy ! Total flux subtracted in 200 components = 0.692775 Jy ! Clean residual min=-0.010921 max=0.010786 Jy/beam ! Clean residual mean=-0.000106 rms=0.003191 Jy/beam ! Combined flux in latest and established models = 0.692775 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.692775 Jy ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.142 mas, bpa=-3.915 degrees ! Estimated noise=4788.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120344 Jy ! Component: 100 - total flux cleaned = 0.0182032 Jy ! Component: 150 - total flux cleaned = 0.0215329 Jy ! Component: 200 - total flux cleaned = 0.0233336 Jy ! Total flux subtracted in 200 components = 0.0233336 Jy ! Clean residual min=-0.009331 max=0.008940 Jy/beam ! Clean residual mean=-0.000051 rms=0.002814 Jy/beam ! Combined flux in latest and established models = 0.716109 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 0.716109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.565 mas, bmaj=26.41 mas, bpa=-6.815 degrees ! Estimated noise=7164.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160915 Jy ! Component: 100 - total flux cleaned = 0.00160962 Jy ! Component: 150 - total flux cleaned = 0.00161043 Jy ! Component: 200 - total flux cleaned = 0.00161231 Jy ! Total flux subtracted in 200 components = 0.00161231 Jy ! Clean residual min=-0.009782 max=0.011490 Jy/beam ! Clean residual mean=-0.000098 rms=0.004806 Jy/beam ! Combined flux in latest and established models = 0.717721 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62027e-06 Jy ! Component: 100 - total flux cleaned = 7.62751e-06 Jy ! Component: 150 - total flux cleaned = 1.14806e-05 Jy ! Component: 200 - total flux cleaned = 1.50156e-05 Jy ! Total flux subtracted in 200 components = 1.50156e-05 Jy ! Clean residual min=-0.009841 max=0.011502 Jy/beam ! Clean residual mean=-0.000097 rms=0.004786 Jy/beam ! Combined flux in latest and established models = 0.717736 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.717736 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.142 mas, bpa=-3.915 degrees ! Estimated noise=4788.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153827 Jy ! Component: 100 - total flux cleaned = -4.93835e-05 Jy ! Component: 150 - total flux cleaned = -2.88091e-05 Jy ! Component: 200 - total flux cleaned = 6.30333e-06 Jy ! Total flux subtracted in 200 components = 6.30333e-06 Jy ! Clean residual min=-0.009266 max=0.008941 Jy/beam ! Clean residual mean=-0.000039 rms=0.002796 Jy/beam ! Combined flux in latest and established models = 0.717743 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.717742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093182Jy sigma=0.000565 ! Fit after self-cal, rms=0.093181Jy sigma=0.000565 wmodel J0106-4034_S_2017_08_12_pus_map.mod ! Writing 46 model components to file: J0106-4034_S_2017_08_12_pus_map.mod wobs J0106-4034_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2017_08_12_pus_uvs.fits wwins J0106-4034_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0106-4034_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.74926e-05 Jy ! Component: 100 - total flux cleaned = -0.000171308 Jy ! Component: 150 - total flux cleaned = -0.00043269 Jy ! Component: 200 - total flux cleaned = -0.000208537 Jy ! Component: 250 - total flux cleaned = 0.000228962 Jy ! Component: 300 - total flux cleaned = 0.000330306 Jy ! Component: 350 - total flux cleaned = 0.000528512 Jy ! Component: 400 - total flux cleaned = 0.000814345 Jy ! Component: 450 - total flux cleaned = 0.000627412 Jy ! Component: 500 - total flux cleaned = 0.000624906 Jy ! Component: 550 - total flux cleaned = 0.000625734 Jy ! Component: 600 - total flux cleaned = 0.000521888 Jy ! Component: 650 - total flux cleaned = 0.0005223 Jy ! Component: 700 - total flux cleaned = 0.000524586 Jy ! Component: 750 - total flux cleaned = 0.000638153 Jy ! Component: 800 - total flux cleaned = 0.000637554 Jy ! Component: 850 - total flux cleaned = 0.000637042 Jy ! Component: 900 - total flux cleaned = 0.000634635 Jy ! Component: 950 - total flux cleaned = 0.00064053 Jy ! Component: 1000 - total flux cleaned = 0.000800597 Jy ! Component: 1050 - total flux cleaned = 0.000805669 Jy ! Component: 1100 - total flux cleaned = 0.000804321 Jy ! Component: 1150 - total flux cleaned = 0.000805002 Jy ! Component: 1200 - total flux cleaned = 0.000806505 Jy ! Component: 1250 - total flux cleaned = 0.00102505 Jy ! Component: 1300 - total flux cleaned = 0.00102618 Jy ! Component: 1350 - total flux cleaned = 0.00103507 Jy ! Component: 1400 - total flux cleaned = 0.00102771 Jy ! Component: 1450 - total flux cleaned = 0.00131731 Jy ! Component: 1500 - total flux cleaned = 0.00131601 Jy ! Component: 1550 - total flux cleaned = 0.00166035 Jy ! Component: 1600 - total flux cleaned = 0.00166959 Jy ! Component: 1650 - total flux cleaned = 0.00206095 Jy ! Component: 1700 - total flux cleaned = 0.00206151 Jy ! Component: 1750 - total flux cleaned = 0.00206644 Jy ! Component: 1800 - total flux cleaned = 0.00252476 Jy ! Component: 1850 - total flux cleaned = 0.00304316 Jy ! Component: 1900 - total flux cleaned = 0.00305666 Jy ! Component: 1950 - total flux cleaned = 0.00305519 Jy ! Component: 2000 - total flux cleaned = 0.00305464 Jy ! Component: 2050 - total flux cleaned = 0.00304672 Jy ! Component: 2100 - total flux cleaned = 0.00305369 Jy ! Component: 2150 - total flux cleaned = 0.00304489 Jy ! Component: 2200 - total flux cleaned = 0.00304232 Jy ! Component: 2250 - total flux cleaned = 0.00302087 Jy ! Component: 2300 - total flux cleaned = 0.00301714 Jy ! Component: 2350 - total flux cleaned = 0.00299813 Jy ! Component: 2400 - total flux cleaned = 0.00299414 Jy ! Component: 2450 - total flux cleaned = 0.00296279 Jy ! Component: 2500 - total flux cleaned = 0.00293025 Jy ! Component: 2550 - total flux cleaned = 0.00289446 Jy ! Component: 2600 - total flux cleaned = 0.00284405 Jy ! Component: 2650 - total flux cleaned = 0.00282819 Jy ! Component: 2700 - total flux cleaned = 0.00279179 Jy ! Component: 2750 - total flux cleaned = 0.00273493 Jy ! Component: 2800 - total flux cleaned = 0.00266606 Jy ! Component: 2850 - total flux cleaned = 0.00261335 Jy ! Component: 2900 - total flux cleaned = 0.00256091 Jy ! Component: 2950 - total flux cleaned = 0.00243433 Jy ! Component: 3000 - total flux cleaned = 0.00229958 Jy ! Component: 3050 - total flux cleaned = 0.00219788 Jy ! Component: 3100 - total flux cleaned = 0.0020842 Jy ! Component: 3150 - total flux cleaned = 0.00197954 Jy ! Component: 3200 - total flux cleaned = 0.00187179 Jy ! Component: 3250 - total flux cleaned = 0.0017497 Jy ! Component: 3300 - total flux cleaned = 0.00163619 Jy ! Component: 3350 - total flux cleaned = 0.00155909 Jy ! Component: 3400 - total flux cleaned = 0.00131045 Jy ! Component: 3450 - total flux cleaned = 0.00116372 Jy ! Component: 3500 - total flux cleaned = 0.000990119 Jy ! Component: 3550 - total flux cleaned = 0.000822966 Jy ! Component: 3600 - total flux cleaned = 0.000631096 Jy ! Component: 3650 - total flux cleaned = 0.000361262 Jy ! Component: 3700 - total flux cleaned = 2.82296e-05 Jy ! Component: 3750 - total flux cleaned = -0.000155895 Jy ! Component: 3800 - total flux cleaned = -0.000480279 Jy ! Component: 3850 - total flux cleaned = -0.000940725 Jy ! Component: 3900 - total flux cleaned = -0.00120841 Jy ! Component: 3950 - total flux cleaned = -0.00164384 Jy ! Component: 4000 - total flux cleaned = -0.00203437 Jy ! Component: 4050 - total flux cleaned = -0.00245331 Jy ! Total flux subtracted in 4096 components = -0.0027646 Jy ! Clean residual min=-0.603045 max=0.600691 Jy/beam ! Clean residual mean=-0.000330 rms=0.127124 Jy/beam ! Combined flux in latest and established models = 0.714978 Jy keep ! Adding 69 model components to the UV plane model. ! The established model now contains 115 components and 0.714978 Jy ![Exited script file: muppet] wmap "J0106-4034_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.515 x 7.142 at -3.915 degrees (North through East) ! Clean map min=-0.87417 max=0.8903 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.890296 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.139725 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -47.0827 47.0827 94.1654 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.4191 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.89 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.515 x 7.142 at -3.915 degrees (North through East) ! Clean map min=-0.87417 max=0.8903 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:20 2019