! Started logfile: J0106-4034_S_2017_08_05_pus_uvs.log on Thu May 9 19:15:53 2019 obs J0106-4034_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2017_08_05_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.391975 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 2540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.372024Jy sigma=0.002409 ! Fit after self-cal, rms=0.310668Jy sigma=0.002045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=6.623 mas, bpa=-1.461 degrees ! Estimated noise=3170.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.546862 Jy ! Component: 100 - total flux cleaned = 0.671502 Jy ! Total flux subtracted in 100 components = 0.671502 Jy ! Clean residual min=-0.018189 max=0.044487 Jy/beam ! Clean residual mean=-0.000038 rms=0.005674 Jy/beam ! Combined flux in latest and established models = 0.671502 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.671502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129010Jy sigma=0.000804 ! Fit after self-cal, rms=0.128991Jy sigma=0.000804 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446775 Jy ! Component: 100 - total flux cleaned = 0.0640554 Jy ! Total flux subtracted in 100 components = 0.0640554 Jy ! Clean residual min=-0.011630 max=0.012523 Jy/beam ! Clean residual mean=0.000048 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 0.735557 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.735557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112429Jy sigma=0.000708 ! Fit after self-cal, rms=0.112417Jy sigma=0.000707 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=7.772 mas, bpa=-1.605 degrees ! Estimated noise=2599.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780692 Jy ! Component: 100 - total flux cleaned = 0.011058 Jy ! Component: 150 - total flux cleaned = 0.0113648 Jy ! Component: 200 - total flux cleaned = 0.0114944 Jy ! Total flux subtracted in 200 components = 0.0114944 Jy ! Clean residual min=-0.010329 max=0.010964 Jy/beam ! Clean residual mean=0.000105 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 0.747051 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.747052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111713Jy sigma=0.000706 ! Fit after self-cal, rms=0.111711Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.07 ! LA 1.01 MK 0.98 NL 1.00* OV 1.03 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 0.97 MK 0.98 NL 1.00* OV 1.05 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.88 ! LA 1.00* MK 1.01 NL 1.00* OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.111711Jy sigma=0.000706 ! Fit after self-cal, rms=0.102199Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.897 mas, bpa=-0.3798 degrees ! Estimated noise=2661.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219828 Jy ! Component: 100 - total flux cleaned = -0.00017453 Jy ! Component: 150 - total flux cleaned = -9.49616e-05 Jy ! Component: 200 - total flux cleaned = -9.73289e-05 Jy ! Total flux subtracted in 200 components = -9.73289e-05 Jy ! Clean residual min=-0.006872 max=0.008111 Jy/beam ! Clean residual mean=0.000065 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.746954 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.746954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102162Jy sigma=0.000651 ! Fit after self-cal, rms=0.102149Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102149Jy sigma=0.000651 ! Fit after self-cal, rms=0.102158Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.899 mas, bpa=-0.3569 degrees ! Estimated noise=2661.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.49207e-06 Jy ! Component: 100 - total flux cleaned = -4.07025e-05 Jy ! Component: 150 - total flux cleaned = -4.17045e-05 Jy ! Component: 200 - total flux cleaned = -4.05147e-05 Jy ! Total flux subtracted in 200 components = -4.05147e-05 Jy ! Clean residual min=-0.006853 max=0.008128 Jy/beam ! Clean residual mean=0.000064 rms=0.001829 Jy/beam ! Combined flux in latest and established models = 0.746914 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.746914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102136Jy sigma=0.000651 ! Fit after self-cal, rms=0.102135Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-90.5, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644383 Jy ! Component: 100 - total flux cleaned = 0.00781759 Jy ! Component: 150 - total flux cleaned = 0.00797012 Jy ! Component: 200 - total flux cleaned = 0.00790329 Jy ! Total flux subtracted in 200 components = 0.00790329 Jy ! Clean residual min=-0.006808 max=0.006313 Jy/beam ! Clean residual mean=0.000054 rms=0.001692 Jy/beam ! Combined flux in latest and established models = 0.754817 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.754817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101734Jy sigma=0.000649 ! Fit after self-cal, rms=0.101694Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101694Jy sigma=0.000648 ! Fit after self-cal, rms=0.100945Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.893 mas, bpa=-0.3601 degrees ! Estimated noise=2662.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211797 Jy ! Component: 100 - total flux cleaned = 0.00206292 Jy ! Component: 150 - total flux cleaned = 0.00201641 Jy ! Component: 200 - total flux cleaned = 0.00197316 Jy ! Total flux subtracted in 200 components = 0.00197316 Jy ! Clean residual min=-0.005612 max=0.005339 Jy/beam ! Clean residual mean=0.000038 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.75679 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.75679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100869Jy sigma=0.000643 ! Fit after self-cal, rms=0.100865Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520388 Jy ! Component: 100 - total flux cleaned = 0.000519609 Jy ! Component: 150 - total flux cleaned = 0.000479617 Jy ! Component: 200 - total flux cleaned = 0.000441761 Jy ! Total flux subtracted in 200 components = 0.000441761 Jy ! Clean residual min=-0.005537 max=0.005316 Jy/beam ! Clean residual mean=0.000038 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.757232 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.757232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100834Jy sigma=0.000643 ! Fit after self-cal, rms=0.100833Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100833Jy sigma=0.000643 ! Fit after self-cal, rms=0.100676Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=29.54 mas, bpa=-0.04474 degrees ! Estimated noise=3623.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.40506e-05 Jy ! Component: 100 - total flux cleaned = 2.56274e-05 Jy ! Component: 150 - total flux cleaned = 0.00010424 Jy ! Component: 200 - total flux cleaned = 0.000124131 Jy ! Total flux subtracted in 200 components = 0.000124131 Jy ! Clean residual min=-0.006306 max=0.005337 Jy/beam ! Clean residual mean=0.000069 rms=0.001888 Jy/beam ! Combined flux in latest and established models = 0.757356 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 0.757356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100670Jy sigma=0.000642 ! Fit after self-cal, rms=0.100665Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.24983e-05 Jy ! Component: 100 - total flux cleaned = 0.000141008 Jy ! Component: 150 - total flux cleaned = 0.000182907 Jy ! Component: 200 - total flux cleaned = 0.00018061 Jy ! Total flux subtracted in 200 components = 0.00018061 Jy ! Clean residual min=-0.006239 max=0.005300 Jy/beam ! Clean residual mean=0.000069 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.757537 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 75 components and 0.757537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100670Jy sigma=0.000642 ! Fit after self-cal, rms=0.100666Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.894 mas, bpa=-0.3525 degrees ! Estimated noise=2661.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.827 x 7.894 at -0.3525 degrees (North through East) ! Clean map min=-0.005237 max=0.69674 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100666Jy sigma=0.000642 ! Fit after self-cal, rms=0.090866Jy sigma=0.000572 ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.9 mas, bpa=-0.3839 degrees ! Estimated noise=2663.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185939 Jy ! Component: 100 - total flux cleaned = 1.74105e-05 Jy ! Component: 150 - total flux cleaned = -1.9374e-05 Jy ! Component: 200 - total flux cleaned = -5.47629e-05 Jy ! Total flux subtracted in 200 components = -5.47629e-05 Jy ! Clean residual min=-0.005511 max=0.005126 Jy/beam ! Clean residual mean=0.000022 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.757482 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.757482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090833Jy sigma=0.000572 ! Fit after self-cal, rms=0.090832Jy sigma=0.000572 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18462e-05 Jy ! Component: 100 - total flux cleaned = 5.0353e-05 Jy ! Component: 150 - total flux cleaned = 8.07987e-05 Jy ! Component: 200 - total flux cleaned = 5.02372e-05 Jy ! Total flux subtracted in 200 components = 5.02372e-05 Jy ! Clean residual min=-0.005435 max=0.005115 Jy/beam ! Clean residual mean=0.000022 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.757532 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.757532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090812Jy sigma=0.000572 ! Fit after self-cal, rms=0.090812Jy sigma=0.000572 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090812Jy sigma=0.000572 ! Fit after self-cal, rms=0.090800Jy sigma=0.000572 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.343 mas, bmaj=6.706 mas, bpa=-0.4996 degrees ! Estimated noise=3268.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.547558 Jy ! Component: 100 - total flux cleaned = 0.671653 Jy ! Component: 150 - total flux cleaned = 0.714176 Jy ! Component: 200 - total flux cleaned = 0.732424 Jy ! Total flux subtracted in 200 components = 0.732424 Jy ! Clean residual min=-0.007672 max=0.009094 Jy/beam ! Clean residual mean=0.000022 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.732424 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.732424 Jy ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.902 mas, bpa=-0.377 degrees ! Estimated noise=2662.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115011 Jy ! Component: 100 - total flux cleaned = 0.0177032 Jy ! Component: 150 - total flux cleaned = 0.0213288 Jy ! Component: 200 - total flux cleaned = 0.0236654 Jy ! Total flux subtracted in 200 components = 0.0236654 Jy ! Clean residual min=-0.005562 max=0.005460 Jy/beam ! Clean residual mean=0.000017 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.756089 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.756089 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.05 mas, bmaj=29.57 mas, bpa=-0.07814 degrees ! Estimated noise=3618.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801488 Jy ! Component: 100 - total flux cleaned = 0.000877258 Jy ! Component: 150 - total flux cleaned = 0.000872112 Jy ! Component: 200 - total flux cleaned = 0.000840924 Jy ! Total flux subtracted in 200 components = 0.000840924 Jy ! Clean residual min=-0.005782 max=0.005153 Jy/beam ! Clean residual mean=0.000040 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.75693 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.09997e-05 Jy ! Component: 100 - total flux cleaned = -8.65716e-05 Jy ! Component: 150 - total flux cleaned = -0.000140346 Jy ! Component: 200 - total flux cleaned = -0.000190993 Jy ! Total flux subtracted in 200 components = -0.000190993 Jy ! Clean residual min=-0.005790 max=0.005202 Jy/beam ! Clean residual mean=0.000040 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.756739 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.756739 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.902 mas, bpa=-0.377 degrees ! Estimated noise=2662.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016785 Jy ! Component: 100 - total flux cleaned = 0.000103476 Jy ! Component: 150 - total flux cleaned = 0.000103019 Jy ! Component: 200 - total flux cleaned = 0.000155335 Jy ! Total flux subtracted in 200 components = 0.000155335 Jy ! Clean residual min=-0.005350 max=0.005057 Jy/beam ! Clean residual mean=0.000021 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.756894 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.756894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090942Jy sigma=0.000572 ! Fit after self-cal, rms=0.090930Jy sigma=0.000572 wmodel J0106-4034_S_2017_08_05_pus_map.mod ! Writing 60 model components to file: J0106-4034_S_2017_08_05_pus_map.mod wobs J0106-4034_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2017_08_05_pus_uvs.fits wwins J0106-4034_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J0106-4034_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.43873e-05 Jy ! Component: 100 - total flux cleaned = 5.83669e-05 Jy ! Component: 150 - total flux cleaned = 0.000383708 Jy ! Component: 200 - total flux cleaned = 0.000689325 Jy ! Component: 250 - total flux cleaned = 0.000691414 Jy ! Component: 300 - total flux cleaned = 0.000758021 Jy ! Component: 350 - total flux cleaned = 0.000756934 Jy ! Component: 400 - total flux cleaned = 0.000820408 Jy ! Component: 450 - total flux cleaned = 0.00124343 Jy ! Component: 500 - total flux cleaned = 0.00141754 Jy ! Component: 550 - total flux cleaned = 0.00164545 Jy ! Component: 600 - total flux cleaned = 0.0019755 Jy ! Component: 650 - total flux cleaned = 0.00208213 Jy ! Component: 700 - total flux cleaned = 0.00234366 Jy ! Component: 750 - total flux cleaned = 0.00265014 Jy ! Component: 800 - total flux cleaned = 0.00299761 Jy ! Component: 850 - total flux cleaned = 0.00319058 Jy ! Component: 900 - total flux cleaned = 0.0034265 Jy ! Component: 950 - total flux cleaned = 0.00356455 Jy ! Component: 1000 - total flux cleaned = 0.00365436 Jy ! Component: 1050 - total flux cleaned = 0.00374315 Jy ! Component: 1100 - total flux cleaned = 0.00391568 Jy ! Component: 1150 - total flux cleaned = 0.00400002 Jy ! Component: 1200 - total flux cleaned = 0.00420633 Jy ! Component: 1250 - total flux cleaned = 0.00428673 Jy ! Component: 1300 - total flux cleaned = 0.00432609 Jy ! Component: 1350 - total flux cleaned = 0.00436519 Jy ! Component: 1400 - total flux cleaned = 0.00444205 Jy ! Component: 1450 - total flux cleaned = 0.00447973 Jy ! Component: 1500 - total flux cleaned = 0.00451635 Jy ! Component: 1550 - total flux cleaned = 0.00465987 Jy ! Component: 1600 - total flux cleaned = 0.00473008 Jy ! Component: 1650 - total flux cleaned = 0.0048348 Jy ! Component: 1700 - total flux cleaned = 0.00493753 Jy ! Component: 1750 - total flux cleaned = 0.00500538 Jy ! Component: 1800 - total flux cleaned = 0.00520401 Jy ! Component: 1850 - total flux cleaned = 0.00526904 Jy ! Component: 1900 - total flux cleaned = 0.00523707 Jy ! Component: 1950 - total flux cleaned = 0.00539559 Jy ! Component: 2000 - total flux cleaned = 0.005458 Jy ! Component: 2050 - total flux cleaned = 0.00555047 Jy ! Component: 2100 - total flux cleaned = 0.00567297 Jy ! Component: 2150 - total flux cleaned = 0.00585331 Jy ! Component: 2200 - total flux cleaned = 0.00603113 Jy ! Component: 2250 - total flux cleaned = 0.00606021 Jy ! Component: 2300 - total flux cleaned = 0.0062053 Jy ! Component: 2350 - total flux cleaned = 0.00634886 Jy ! Component: 2400 - total flux cleaned = 0.0064057 Jy ! Component: 2450 - total flux cleaned = 0.00657453 Jy ! Component: 2500 - total flux cleaned = 0.00663015 Jy ! Component: 2550 - total flux cleaned = 0.00679546 Jy ! Component: 2600 - total flux cleaned = 0.00687751 Jy ! Component: 2650 - total flux cleaned = 0.00701301 Jy ! Component: 2700 - total flux cleaned = 0.00709386 Jy ! Component: 2750 - total flux cleaned = 0.00725425 Jy ! Component: 2800 - total flux cleaned = 0.00746541 Jy ! Component: 2850 - total flux cleaned = 0.00754391 Jy ! Component: 2900 - total flux cleaned = 0.00772572 Jy ! Component: 2950 - total flux cleaned = 0.00782879 Jy ! Component: 3000 - total flux cleaned = 0.00795624 Jy ! Component: 3050 - total flux cleaned = 0.00810832 Jy ! Component: 3100 - total flux cleaned = 0.00823386 Jy ! Component: 3150 - total flux cleaned = 0.00843318 Jy ! Component: 3200 - total flux cleaned = 0.00858154 Jy ! Component: 3250 - total flux cleaned = 0.00870446 Jy ! Component: 3300 - total flux cleaned = 0.00887558 Jy ! Component: 3350 - total flux cleaned = 0.00897287 Jy ! Component: 3400 - total flux cleaned = 0.00919032 Jy ! Component: 3450 - total flux cleaned = 0.00935831 Jy ! Component: 3500 - total flux cleaned = 0.00947763 Jy ! Component: 3550 - total flux cleaned = 0.0096439 Jy ! Component: 3600 - total flux cleaned = 0.00971484 Jy ! Component: 3650 - total flux cleaned = 0.00983249 Jy ! Component: 3700 - total flux cleaned = 0.00992626 Jy ! Component: 3750 - total flux cleaned = 0.0100195 Jy ! Component: 3800 - total flux cleaned = 0.0100892 Jy ! Component: 3850 - total flux cleaned = 0.0101818 Jy ! Component: 3900 - total flux cleaned = 0.0102281 Jy ! Component: 3950 - total flux cleaned = 0.0102973 Jy ! Component: 4000 - total flux cleaned = 0.0103892 Jy ! Component: 4050 - total flux cleaned = 0.010458 Jy ! Total flux subtracted in 4096 components = 0.0105037 Jy ! Clean residual min=-0.001191 max=0.001278 Jy/beam ! Clean residual mean=0.000016 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.767398 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 305 components and 0.767398 Jy ![Exited script file: muppet] wmap "J0106-4034_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.83 x 7.902 at -0.377 degrees (North through East) ! Clean map min=-0.0036804 max=0.69685 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.69685 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000424619 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.182802 0.182802 0.365604 0.731209 1.46242 2.92484 5.84967 11.6993 23.3987 46.7974 93.5947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.696 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.83 x 7.902 at -0.377 degrees (North through East) ! Clean map min=-0.0036804 max=0.69685 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:15:58 2019