! Started logfile: J0106-4034_S_2017_07_16_pus_uvs.log on Thu May 9 10:56:43 2019 obs J0106-4034_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2017_07_16_pus_uva.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.211696 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.531983Jy sigma=0.003415 ! Fit after self-cal, rms=0.326957Jy sigma=0.002086 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.009 mas, bmaj=6.102 mas, bpa=3.519 degrees ! Estimated noise=5454.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.533591 Jy ! Component: 100 - total flux cleaned = 0.652588 Jy ! Total flux subtracted in 100 components = 0.652588 Jy ! Clean residual min=-0.032176 max=0.042223 Jy/beam ! Clean residual mean=0.000136 rms=0.008590 Jy/beam ! Combined flux in latest and established models = 0.652588 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.652588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126621Jy sigma=0.000767 ! Fit after self-cal, rms=0.126603Jy sigma=0.000767 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=6.721 mas, bpa=4.041 degrees ! Estimated noise=4874.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495498 Jy ! Component: 100 - total flux cleaned = 0.070605 Jy ! Component: 150 - total flux cleaned = 0.0781903 Jy ! Component: 200 - total flux cleaned = 0.0794388 Jy ! Total flux subtracted in 200 components = 0.0794388 Jy ! Clean residual min=-0.014443 max=0.011225 Jy/beam ! Clean residual mean=-0.000026 rms=0.003294 Jy/beam ! Combined flux in latest and established models = 0.732027 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.732027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107407Jy sigma=0.000659 ! Fit after self-cal, rms=0.107296Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 1.00* MK 1.01 NL 1.00* OV 0.97 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 1.00* MK 0.98 NL 1.00* OV 1.03 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 1.00* MK 1.01 NL 1.00* OV 0.92 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.107296Jy sigma=0.000659 ! Fit after self-cal, rms=0.102949Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=6.719 mas, bpa=4.111 degrees ! Estimated noise=4856.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.34735e-05 Jy ! Component: 100 - total flux cleaned = 0.000178122 Jy ! Component: 150 - total flux cleaned = 0.000302139 Jy ! Component: 200 - total flux cleaned = 0.000411823 Jy ! Total flux subtracted in 200 components = 0.000411823 Jy ! Clean residual min=-0.009344 max=0.008829 Jy/beam ! Clean residual mean=0.000006 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 0.732438 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.732438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102846Jy sigma=0.000636 ! Fit after self-cal, rms=0.102820Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102820Jy sigma=0.000636 ! Fit after self-cal, rms=0.102803Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=6.719 mas, bpa=4.102 degrees ! Estimated noise=4855.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367134 Jy ! Component: 100 - total flux cleaned = -0.000373907 Jy ! Component: 150 - total flux cleaned = -0.000379683 Jy ! Component: 200 - total flux cleaned = -0.000381952 Jy ! Total flux subtracted in 200 components = -0.000381952 Jy ! Clean residual min=-0.009142 max=0.008593 Jy/beam ! Clean residual mean=0.000007 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 0.732056 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.732056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102746Jy sigma=0.000636 ! Fit after self-cal, rms=0.102733Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211881 Jy ! Component: 100 - total flux cleaned = -0.000215685 Jy ! Component: 150 - total flux cleaned = -0.000218228 Jy ! Component: 200 - total flux cleaned = -0.000177845 Jy ! Total flux subtracted in 200 components = -0.000177845 Jy ! Clean residual min=-0.008950 max=0.008435 Jy/beam ! Clean residual mean=0.000008 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.731879 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.731879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102694Jy sigma=0.000635 ! Fit after self-cal, rms=0.102686Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102686Jy sigma=0.000635 ! Fit after self-cal, rms=0.102317Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=6.721 mas, bpa=4.1 degrees ! Estimated noise=4854.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044286 Jy ! Component: 100 - total flux cleaned = -0.000401725 Jy ! Component: 150 - total flux cleaned = -0.000327575 Jy ! Component: 200 - total flux cleaned = -0.000288868 Jy ! Total flux subtracted in 200 components = -0.000288868 Jy ! Clean residual min=-0.008479 max=0.008255 Jy/beam ! Clean residual mean=0.000006 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.73159 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.73159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102292Jy sigma=0.000632 ! Fit after self-cal, rms=0.102292Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.556e-05 Jy ! Component: 100 - total flux cleaned = -6.22793e-05 Jy ! Component: 150 - total flux cleaned = -3.23893e-05 Jy ! Component: 200 - total flux cleaned = -4.14707e-06 Jy ! Total flux subtracted in 200 components = -4.14707e-06 Jy ! Clean residual min=-0.008490 max=0.008076 Jy/beam ! Clean residual mean=0.000006 rms=0.002118 Jy/beam ! Combined flux in latest and established models = 0.731585 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.731585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102274Jy sigma=0.000632 ! Fit after self-cal, rms=0.102270Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102270Jy sigma=0.000632 ! Fit after self-cal, rms=0.102275Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=22.23 mas, bpa=-3.598 degrees ! Estimated noise=8222.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000634063 Jy ! Component: 100 - total flux cleaned = -0.000635048 Jy ! Component: 150 - total flux cleaned = -0.000635045 Jy ! Component: 200 - total flux cleaned = -0.000634827 Jy ! Total flux subtracted in 200 components = -0.000634827 Jy ! Clean residual min=-0.008265 max=0.009072 Jy/beam ! Clean residual mean=0.000022 rms=0.003572 Jy/beam ! Combined flux in latest and established models = 0.730951 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 34 components and 0.730951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102285Jy sigma=0.000632 ! Fit after self-cal, rms=0.102282Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09616e-05 Jy ! Component: 100 - total flux cleaned = 1.99422e-05 Jy ! Component: 150 - total flux cleaned = 1.94891e-05 Jy ! Component: 200 - total flux cleaned = 1.94405e-05 Jy ! Total flux subtracted in 200 components = 1.94405e-05 Jy ! Clean residual min=-0.008227 max=0.009070 Jy/beam ! Clean residual mean=0.000022 rms=0.003564 Jy/beam ! Combined flux in latest and established models = 0.73097 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.73097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102292Jy sigma=0.000632 ! Fit after self-cal, rms=0.102287Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=6.721 mas, bpa=4.095 degrees ! Estimated noise=4853.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.232 x 6.721 at 4.095 degrees (North through East) ! Clean map min=-0.0081554 max=0.69121 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102287Jy sigma=0.000632 ! Fit after self-cal, rms=0.089195Jy sigma=0.000542 ! Inverting map and beam ! Estimated beam: bmin=2.233 mas, bmaj=6.722 mas, bpa=4.119 degrees ! Estimated noise=4856.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235234 Jy ! Component: 100 - total flux cleaned = -0.000236646 Jy ! Component: 150 - total flux cleaned = -0.00023881 Jy ! Component: 200 - total flux cleaned = -0.000213554 Jy ! Total flux subtracted in 200 components = -0.000213554 Jy ! Clean residual min=-0.008671 max=0.007911 Jy/beam ! Clean residual mean=0.000009 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.730756 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.730757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089168Jy sigma=0.000542 ! Fit after self-cal, rms=0.089165Jy sigma=0.000542 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.22746e-06 Jy ! Component: 100 - total flux cleaned = -7.81897e-06 Jy ! Component: 150 - total flux cleaned = -6.34477e-06 Jy ! Component: 200 - total flux cleaned = 1.21926e-05 Jy ! Total flux subtracted in 200 components = 1.21926e-05 Jy ! Clean residual min=-0.008651 max=0.007799 Jy/beam ! Clean residual mean=0.000008 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.730769 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.730769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089146Jy sigma=0.000542 ! Fit after self-cal, rms=0.089145Jy sigma=0.000542 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089145Jy sigma=0.000542 ! Fit after self-cal, rms=0.089156Jy sigma=0.000542 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=6.1 mas, bpa=3.619 degrees ! Estimated noise=5440.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532158 Jy ! Component: 100 - total flux cleaned = 0.650385 Jy ! Component: 150 - total flux cleaned = 0.694393 Jy ! Component: 200 - total flux cleaned = 0.714671 Jy ! Total flux subtracted in 200 components = 0.714671 Jy ! Clean residual min=-0.013756 max=0.012257 Jy/beam ! Clean residual mean=0.000032 rms=0.003352 Jy/beam ! Combined flux in latest and established models = 0.714671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.714671 Jy ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=6.722 mas, bpa=4.116 degrees ! Estimated noise=4856.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104675 Jy ! Component: 100 - total flux cleaned = 0.0116533 Jy ! Component: 150 - total flux cleaned = 0.0127947 Jy ! Component: 200 - total flux cleaned = 0.013564 Jy ! Total flux subtracted in 200 components = 0.013564 Jy ! Clean residual min=-0.010432 max=0.009376 Jy/beam ! Clean residual mean=0.000018 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.728235 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.728235 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.126 mas, bmaj=22.24 mas, bpa=-3.574 degrees ! Estimated noise=8216.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237155 Jy ! Component: 100 - total flux cleaned = 0.00236675 Jy ! Component: 150 - total flux cleaned = 0.00236352 Jy ! Component: 200 - total flux cleaned = 0.00236103 Jy ! Total flux subtracted in 200 components = 0.00236103 Jy ! Clean residual min=-0.007761 max=0.010452 Jy/beam ! Clean residual mean=0.000028 rms=0.003739 Jy/beam ! Combined flux in latest and established models = 0.730596 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.62814e-06 Jy ! Component: 100 - total flux cleaned = -2.30743e-06 Jy ! Component: 150 - total flux cleaned = -2.30107e-06 Jy ! Component: 200 - total flux cleaned = -2.09221e-06 Jy ! Total flux subtracted in 200 components = -2.09221e-06 Jy ! Clean residual min=-0.007950 max=0.010114 Jy/beam ! Clean residual mean=0.000028 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.730594 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.730594 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=6.722 mas, bpa=4.116 degrees ! Estimated noise=4856.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641219 Jy ! Component: 100 - total flux cleaned = 0.000644652 Jy ! Component: 150 - total flux cleaned = 0.000646351 Jy ! Component: 200 - total flux cleaned = 0.000650307 Jy ! Total flux subtracted in 200 components = 0.000650307 Jy ! Clean residual min=-0.009269 max=0.008610 Jy/beam ! Clean residual mean=0.000007 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.731245 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.731245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089316Jy sigma=0.000543 ! Fit after self-cal, rms=0.089305Jy sigma=0.000543 wmodel J0106-4034_S_2017_07_16_pus_map.mod ! Writing 47 model components to file: J0106-4034_S_2017_07_16_pus_map.mod wobs J0106-4034_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2017_07_16_pus_uvs.fits wwins J0106-4034_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0106-4034_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131078 Jy ! Component: 100 - total flux cleaned = -0.00323863 Jy ! Component: 150 - total flux cleaned = -0.00422944 Jy ! Component: 200 - total flux cleaned = -0.00513075 Jy ! Component: 250 - total flux cleaned = -0.00616212 Jy ! Component: 300 - total flux cleaned = -0.00721987 Jy ! Component: 350 - total flux cleaned = -0.00784908 Jy ! Component: 400 - total flux cleaned = -0.00844225 Jy ! Component: 450 - total flux cleaned = -0.00900351 Jy ! Component: 500 - total flux cleaned = -0.00931061 Jy ! Component: 550 - total flux cleaned = -0.00989253 Jy ! Component: 600 - total flux cleaned = -0.0104486 Jy ! Component: 650 - total flux cleaned = -0.0109805 Jy ! Component: 700 - total flux cleaned = -0.0115575 Jy ! Component: 750 - total flux cleaned = -0.0122947 Jy ! Component: 800 - total flux cleaned = -0.0128864 Jy ! Component: 850 - total flux cleaned = -0.0132862 Jy ! Component: 900 - total flux cleaned = -0.013508 Jy ! Component: 950 - total flux cleaned = -0.0139892 Jy ! Component: 1000 - total flux cleaned = -0.014507 Jy ! Component: 1050 - total flux cleaned = -0.0149602 Jy ! Component: 1100 - total flux cleaned = -0.0154521 Jy ! Component: 1150 - total flux cleaned = -0.0158378 Jy ! Component: 1200 - total flux cleaned = -0.0161682 Jy ! Component: 1250 - total flux cleaned = -0.0166297 Jy ! Component: 1300 - total flux cleaned = -0.0169468 Jy ! Component: 1350 - total flux cleaned = -0.0172149 Jy ! Component: 1400 - total flux cleaned = -0.01761 Jy ! Component: 1450 - total flux cleaned = -0.0179562 Jy ! Component: 1500 - total flux cleaned = -0.0182541 Jy ! Component: 1550 - total flux cleaned = -0.0185054 Jy ! Component: 1600 - total flux cleaned = -0.0187533 Jy ! Component: 1650 - total flux cleaned = -0.018957 Jy ! Component: 1700 - total flux cleaned = -0.0191576 Jy ! Component: 1750 - total flux cleaned = -0.0193957 Jy ! Component: 1800 - total flux cleaned = -0.0197095 Jy ! Component: 1850 - total flux cleaned = -0.0199036 Jy ! Component: 1900 - total flux cleaned = -0.0202112 Jy ! Component: 1950 - total flux cleaned = -0.0204395 Jy ! Component: 2000 - total flux cleaned = -0.0206658 Jy ! Component: 2050 - total flux cleaned = -0.0208901 Jy ! Component: 2100 - total flux cleaned = -0.0210755 Jy ! Component: 2150 - total flux cleaned = -0.0212222 Jy ! Component: 2200 - total flux cleaned = -0.0214777 Jy ! Component: 2250 - total flux cleaned = -0.0216228 Jy ! Component: 2300 - total flux cleaned = -0.0219117 Jy ! Component: 2350 - total flux cleaned = -0.0220914 Jy ! Component: 2400 - total flux cleaned = -0.0223066 Jy ! Component: 2450 - total flux cleaned = -0.0225217 Jy ! Component: 2500 - total flux cleaned = -0.0226292 Jy ! Component: 2550 - total flux cleaned = -0.0227368 Jy ! Component: 2600 - total flux cleaned = -0.0228808 Jy ! Component: 2650 - total flux cleaned = -0.0229892 Jy ! Component: 2700 - total flux cleaned = -0.0231343 Jy ! Component: 2750 - total flux cleaned = -0.0232432 Jy ! Component: 2800 - total flux cleaned = -0.0233887 Jy ! Component: 2850 - total flux cleaned = -0.0235349 Jy ! Component: 2900 - total flux cleaned = -0.0236085 Jy ! Component: 2950 - total flux cleaned = -0.023719 Jy ! Component: 3000 - total flux cleaned = -0.0237934 Jy ! Component: 3050 - total flux cleaned = -0.023942 Jy ! Component: 3100 - total flux cleaned = -0.0240542 Jy ! Component: 3150 - total flux cleaned = -0.0241669 Jy ! Component: 3200 - total flux cleaned = -0.0242426 Jy ! Component: 3250 - total flux cleaned = -0.0242808 Jy ! Component: 3300 - total flux cleaned = -0.0243187 Jy ! Component: 3350 - total flux cleaned = -0.0243958 Jy ! Component: 3400 - total flux cleaned = -0.0243959 Jy ! Component: 3450 - total flux cleaned = -0.024396 Jy ! Component: 3500 - total flux cleaned = -0.024356 Jy ! Component: 3550 - total flux cleaned = -0.0243159 Jy ! Component: 3600 - total flux cleaned = -0.0243964 Jy ! Component: 3650 - total flux cleaned = -0.0244369 Jy ! Component: 3700 - total flux cleaned = -0.0245188 Jy ! Component: 3750 - total flux cleaned = -0.0245603 Jy ! Component: 3800 - total flux cleaned = -0.0245605 Jy ! Component: 3850 - total flux cleaned = -0.02456 Jy ! Component: 3900 - total flux cleaned = -0.0246026 Jy ! Component: 3950 - total flux cleaned = -0.0246899 Jy ! Component: 4000 - total flux cleaned = -0.0246461 Jy ! Component: 4050 - total flux cleaned = -0.0246462 Jy ! Total flux subtracted in 4096 components = -0.0246461 Jy ! Clean residual min=-0.002465 max=0.002986 Jy/beam ! Clean residual mean=-0.000010 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.706599 Jy keep ! Adding 217 model components to the UV plane model. ! The established model now contains 264 components and 0.706598 Jy ![Exited script file: muppet] wmap "J0106-4034_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.234 x 6.722 at 4.116 degrees (North through East) ! Clean map min=-0.0055318 max=0.69018 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.690183 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000790203 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343475 0.343475 0.686951 1.3739 2.7478 5.49561 10.9912 21.9824 43.9649 87.9297 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.69 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.234 x 6.722 at 4.116 degrees (North through East) ! Clean map min=-0.0055318 max=0.69018 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:56:48 2019