! Started logfile: J0106-4034_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:54 2019 obs J0106-4034_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2017_06_10_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.32 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.309630Jy sigma=0.002119 ! Fit after self-cal, rms=0.301222Jy sigma=0.002060 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.312 mas, bmaj=7.592 mas, bpa=4.708 degrees ! Estimated noise=4576.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.550229 Jy ! Component: 100 - total flux cleaned = 0.672875 Jy ! Total flux subtracted in 100 components = 0.672875 Jy ! Clean residual min=-0.020044 max=0.042023 Jy/beam ! Clean residual mean=-0.000199 rms=0.006357 Jy/beam ! Combined flux in latest and established models = 0.672875 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.672875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122477Jy sigma=0.000789 ! Fit after self-cal, rms=0.122422Jy sigma=0.000789 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422314 Jy ! Component: 100 - total flux cleaned = 0.0603145 Jy ! Total flux subtracted in 100 components = 0.0603145 Jy ! Clean residual min=-0.013531 max=0.012405 Jy/beam ! Clean residual mean=-0.000105 rms=0.003672 Jy/beam ! Combined flux in latest and established models = 0.73319 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.73319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105238Jy sigma=0.000685 ! Fit after self-cal, rms=0.105177Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=9.091 mas, bpa=3.964 degrees ! Estimated noise=3546.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976792 Jy ! Component: 100 - total flux cleaned = 0.0135993 Jy ! Component: 150 - total flux cleaned = 0.0152991 Jy ! Component: 200 - total flux cleaned = 0.0160487 Jy ! Total flux subtracted in 200 components = 0.0160487 Jy ! Clean residual min=-0.010478 max=0.010379 Jy/beam ! Clean residual mean=-0.000127 rms=0.002924 Jy/beam ! Combined flux in latest and established models = 0.749239 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 47 components and 0.749239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104184Jy sigma=0.000681 ! Fit after self-cal, rms=0.104183Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.05 ! LA 1.01 MK 0.99 NL 1.00* OV 1.03 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00 ! LA 0.97 MK 1.00 NL 1.00* OV 1.07 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.98 ! LA 0.96 MK 1.00 NL 1.00* OV 0.94 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104183Jy sigma=0.000681 ! Fit after self-cal, rms=0.098799Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=9.162 mas, bpa=5.009 degrees ! Estimated noise=3631.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.34178e-06 Jy ! Component: 100 - total flux cleaned = 7.02878e-05 Jy ! Component: 150 - total flux cleaned = 7.191e-05 Jy ! Component: 200 - total flux cleaned = 7.30396e-05 Jy ! Total flux subtracted in 200 components = 7.30396e-05 Jy ! Clean residual min=-0.007503 max=0.008167 Jy/beam ! Clean residual mean=0.000052 rms=0.002325 Jy/beam ! Combined flux in latest and established models = 0.749312 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.749312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098792Jy sigma=0.000648 ! Fit after self-cal, rms=0.098781Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098781Jy sigma=0.000648 ! Fit after self-cal, rms=0.098521Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=9.165 mas, bpa=5.006 degrees ! Estimated noise=3631.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138164 Jy ! Component: 100 - total flux cleaned = -0.000123174 Jy ! Component: 150 - total flux cleaned = -0.000123824 Jy ! Component: 200 - total flux cleaned = -0.000123731 Jy ! Total flux subtracted in 200 components = -0.000123731 Jy ! Clean residual min=-0.007540 max=0.007654 Jy/beam ! Clean residual mean=0.000035 rms=0.002213 Jy/beam ! Combined flux in latest and established models = 0.749188 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.749188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098516Jy sigma=0.000646 ! Fit after self-cal, rms=0.098515Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.081e-05 Jy ! Component: 100 - total flux cleaned = -3.21934e-05 Jy ! Component: 150 - total flux cleaned = -3.20066e-05 Jy ! Component: 200 - total flux cleaned = -1.92037e-05 Jy ! Total flux subtracted in 200 components = -1.92037e-05 Jy ! Clean residual min=-0.007538 max=0.007617 Jy/beam ! Clean residual mean=0.000035 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.749169 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.749169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098511Jy sigma=0.000646 ! Fit after self-cal, rms=0.098511Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098511Jy sigma=0.000646 ! Fit after self-cal, rms=0.098509Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=9.166 mas, bpa=4.998 degrees ! Estimated noise=3630.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017146 Jy ! Component: 100 - total flux cleaned = -0.000157206 Jy ! Component: 150 - total flux cleaned = -0.000158547 Jy ! Component: 200 - total flux cleaned = -0.00017155 Jy ! Total flux subtracted in 200 components = -0.00017155 Jy ! Clean residual min=-0.007533 max=0.007584 Jy/beam ! Clean residual mean=0.000034 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.748997 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.748997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098504Jy sigma=0.000646 ! Fit after self-cal, rms=0.098504Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.06519e-05 Jy ! Component: 100 - total flux cleaned = -3.18293e-05 Jy ! Component: 150 - total flux cleaned = -1.97019e-05 Jy ! Component: 200 - total flux cleaned = -2.01922e-05 Jy ! Total flux subtracted in 200 components = -2.01922e-05 Jy ! Clean residual min=-0.007536 max=0.007551 Jy/beam ! Clean residual mean=0.000034 rms=0.002207 Jy/beam ! Combined flux in latest and established models = 0.748977 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.748977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098501Jy sigma=0.000646 ! Fit after self-cal, rms=0.098501Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098501Jy sigma=0.000646 ! Fit after self-cal, rms=0.098496Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.11 mas, bmaj=33.22 mas, bpa=4.891 degrees ! Estimated noise=4902.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.62186e-05 Jy ! Component: 100 - total flux cleaned = -2.61998e-05 Jy ! Component: 150 - total flux cleaned = -2.57842e-05 Jy ! Component: 200 - total flux cleaned = -2.62062e-05 Jy ! Total flux subtracted in 200 components = -2.62062e-05 Jy ! Clean residual min=-0.009284 max=0.010489 Jy/beam ! Clean residual mean=0.000068 rms=0.003659 Jy/beam ! Combined flux in latest and established models = 0.748951 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 63 components and 0.748951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098498Jy sigma=0.000646 ! Fit after self-cal, rms=0.098496Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22993e-06 Jy ! Component: 100 - total flux cleaned = 2.37774e-06 Jy ! Component: 150 - total flux cleaned = 2.06448e-06 Jy ! Component: 200 - total flux cleaned = -1.23178e-05 Jy ! Total flux subtracted in 200 components = -1.23178e-05 Jy ! Clean residual min=-0.009281 max=0.010465 Jy/beam ! Clean residual mean=0.000068 rms=0.003657 Jy/beam ! Combined flux in latest and established models = 0.748938 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.748938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098501Jy sigma=0.000646 ! Fit after self-cal, rms=0.098500Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=9.167 mas, bpa=4.99 degrees ! Estimated noise=3630.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.925 x 9.167 at 4.99 degrees (North through East) ! Clean map min=-0.0072129 max=0.71447 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098500Jy sigma=0.000646 ! Fit after self-cal, rms=0.087674Jy sigma=0.000569 ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=9.165 mas, bpa=4.958 degrees ! Estimated noise=3629.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74785e-05 Jy ! Component: 100 - total flux cleaned = -5.05536e-05 Jy ! Component: 150 - total flux cleaned = -5.03527e-05 Jy ! Component: 200 - total flux cleaned = -5.04431e-05 Jy ! Total flux subtracted in 200 components = -5.04431e-05 Jy ! Clean residual min=-0.007921 max=0.007574 Jy/beam ! Clean residual mean=0.000032 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.748888 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.748888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087671Jy sigma=0.000569 ! Fit after self-cal, rms=0.087671Jy sigma=0.000569 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.23994e-05 Jy ! Component: 100 - total flux cleaned = -1.21261e-05 Jy ! Component: 150 - total flux cleaned = -1.19084e-05 Jy ! Component: 200 - total flux cleaned = -1.24308e-05 Jy ! Total flux subtracted in 200 components = -1.24308e-05 Jy ! Clean residual min=-0.007922 max=0.007556 Jy/beam ! Clean residual mean=0.000032 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.748875 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.748875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087668Jy sigma=0.000569 ! Fit after self-cal, rms=0.087668Jy sigma=0.000569 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087668Jy sigma=0.000569 ! Fit after self-cal, rms=0.087667Jy sigma=0.000569 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=7.652 mas, bpa=5.315 degrees ! Estimated noise=4661.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.550232 Jy ! Component: 100 - total flux cleaned = 0.673665 Jy ! Component: 150 - total flux cleaned = 0.715767 Jy ! Component: 200 - total flux cleaned = 0.733432 Jy ! Total flux subtracted in 200 components = 0.733432 Jy ! Clean residual min=-0.011227 max=0.008951 Jy/beam ! Clean residual mean=-0.000017 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 0.733432 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.733432 Jy ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=9.165 mas, bpa=4.957 degrees ! Estimated noise=3629.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00964353 Jy ! Component: 100 - total flux cleaned = 0.0132433 Jy ! Component: 150 - total flux cleaned = 0.0148125 Jy ! Component: 200 - total flux cleaned = 0.0152744 Jy ! Total flux subtracted in 200 components = 0.0152744 Jy ! Clean residual min=-0.007979 max=0.007552 Jy/beam ! Clean residual mean=0.000031 rms=0.002238 Jy/beam ! Combined flux in latest and established models = 0.748706 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 0.748706 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.11 mas, bmaj=33.21 mas, bpa=4.862 degrees ! Estimated noise=4902.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255787 Jy ! Component: 100 - total flux cleaned = 0.000254435 Jy ! Component: 150 - total flux cleaned = 0.000253606 Jy ! Component: 200 - total flux cleaned = 0.000252976 Jy ! Total flux subtracted in 200 components = 0.000252976 Jy ! Clean residual min=-0.009599 max=0.010517 Jy/beam ! Clean residual mean=0.000064 rms=0.003698 Jy/beam ! Combined flux in latest and established models = 0.748959 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.3842e-05 Jy ! Component: 100 - total flux cleaned = -2.67023e-05 Jy ! Component: 150 - total flux cleaned = -3.88823e-05 Jy ! Component: 200 - total flux cleaned = -5.05024e-05 Jy ! Total flux subtracted in 200 components = -5.05024e-05 Jy ! Clean residual min=-0.009613 max=0.010479 Jy/beam ! Clean residual mean=0.000064 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.748909 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 50 components and 0.748909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=9.165 mas, bpa=4.957 degrees ! Estimated noise=3629.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307803 Jy ! Component: 100 - total flux cleaned = -0.000272069 Jy ! Component: 150 - total flux cleaned = -0.000205314 Jy ! Component: 200 - total flux cleaned = -0.000130216 Jy ! Total flux subtracted in 200 components = -0.000130216 Jy ! Clean residual min=-0.007903 max=0.007602 Jy/beam ! Clean residual mean=0.000032 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 0.748779 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.748779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087696Jy sigma=0.000570 ! Fit after self-cal, rms=0.087698Jy sigma=0.000570 wmodel J0106-4034_S_2017_06_10_pus_map.mod ! Writing 56 model components to file: J0106-4034_S_2017_06_10_pus_map.mod wobs J0106-4034_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2017_06_10_pus_uvs.fits wwins J0106-4034_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0106-4034_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232674 Jy ! Component: 100 - total flux cleaned = 0.000851332 Jy ! Component: 150 - total flux cleaned = 0.00176659 Jy ! Component: 200 - total flux cleaned = 0.00250792 Jy ! Component: 250 - total flux cleaned = 0.00250733 Jy ! Component: 300 - total flux cleaned = 0.00222991 Jy ! Component: 350 - total flux cleaned = 0.00187654 Jy ! Component: 400 - total flux cleaned = 0.00154115 Jy ! Component: 450 - total flux cleaned = 0.00106379 Jy ! Component: 500 - total flux cleaned = 0.000683005 Jy ! Component: 550 - total flux cleaned = 0.000244887 Jy ! Component: 600 - total flux cleaned = -0.000104766 Jy ! Component: 650 - total flux cleaned = -0.000374017 Jy ! Component: 700 - total flux cleaned = -0.000635508 Jy ! Component: 750 - total flux cleaned = -0.000886744 Jy ! Component: 800 - total flux cleaned = -0.00106707 Jy ! Component: 850 - total flux cleaned = -0.00136071 Jy ! Component: 900 - total flux cleaned = -0.00153159 Jy ! Component: 950 - total flux cleaned = -0.00147716 Jy ! Component: 1000 - total flux cleaned = -0.00147859 Jy ! Component: 1050 - total flux cleaned = -0.00158455 Jy ! Component: 1100 - total flux cleaned = -0.00148094 Jy ! Component: 1150 - total flux cleaned = -0.00148148 Jy ! Component: 1200 - total flux cleaned = -0.00153039 Jy ! Component: 1250 - total flux cleaned = -0.00138447 Jy ! Component: 1300 - total flux cleaned = -0.00157555 Jy ! Component: 1350 - total flux cleaned = -0.00162221 Jy ! Component: 1400 - total flux cleaned = -0.00166896 Jy ! Component: 1450 - total flux cleaned = -0.0018955 Jy ! Component: 1500 - total flux cleaned = -0.00202917 Jy ! Component: 1550 - total flux cleaned = -0.00224829 Jy ! Component: 1600 - total flux cleaned = -0.00233474 Jy ! Component: 1650 - total flux cleaned = -0.00254801 Jy ! Component: 1700 - total flux cleaned = -0.00275839 Jy ! Component: 1750 - total flux cleaned = -0.00284182 Jy ! Component: 1800 - total flux cleaned = -0.00296511 Jy ! Component: 1850 - total flux cleaned = -0.00304646 Jy ! Component: 1900 - total flux cleaned = -0.00308671 Jy ! Component: 1950 - total flux cleaned = -0.00312642 Jy ! Component: 2000 - total flux cleaned = -0.00304718 Jy ! Component: 2050 - total flux cleaned = -0.00304717 Jy ! Component: 2100 - total flux cleaned = -0.00304707 Jy ! Component: 2150 - total flux cleaned = -0.00293075 Jy ! Component: 2200 - total flux cleaned = -0.00296896 Jy ! Component: 2250 - total flux cleaned = -0.00296882 Jy ! Component: 2300 - total flux cleaned = -0.0029693 Jy ! Component: 2350 - total flux cleaned = -0.00308251 Jy ! Component: 2400 - total flux cleaned = -0.00304489 Jy ! Component: 2450 - total flux cleaned = -0.00308243 Jy ! Component: 2500 - total flux cleaned = -0.00304522 Jy ! Component: 2550 - total flux cleaned = -0.00311971 Jy ! Component: 2600 - total flux cleaned = -0.00326806 Jy ! Component: 2650 - total flux cleaned = -0.00323089 Jy ! Component: 2700 - total flux cleaned = -0.0033048 Jy ! Component: 2750 - total flux cleaned = -0.00337865 Jy ! Component: 2800 - total flux cleaned = -0.00341559 Jy ! Component: 2850 - total flux cleaned = -0.00348933 Jy ! Component: 2900 - total flux cleaned = -0.00345208 Jy ! Component: 2950 - total flux cleaned = -0.00348904 Jy ! Component: 3000 - total flux cleaned = -0.00345177 Jy ! Component: 3050 - total flux cleaned = -0.00345203 Jy ! Component: 3100 - total flux cleaned = -0.00356422 Jy ! Component: 3150 - total flux cleaned = -0.00356417 Jy ! Component: 3200 - total flux cleaned = -0.00360194 Jy ! Component: 3250 - total flux cleaned = -0.00352616 Jy ! Component: 3300 - total flux cleaned = -0.00360229 Jy ! Component: 3350 - total flux cleaned = -0.00367858 Jy ! Component: 3400 - total flux cleaned = -0.00371681 Jy ! Component: 3450 - total flux cleaned = -0.00375519 Jy ! Component: 3500 - total flux cleaned = -0.00383289 Jy ! Component: 3550 - total flux cleaned = -0.00394971 Jy ! Component: 3600 - total flux cleaned = -0.00410688 Jy ! Component: 3650 - total flux cleaned = -0.0042649 Jy ! Component: 3700 - total flux cleaned = -0.00438393 Jy ! Component: 3750 - total flux cleaned = -0.00446362 Jy ! Component: 3800 - total flux cleaned = -0.00458415 Jy ! Component: 3850 - total flux cleaned = -0.00474574 Jy ! Component: 3900 - total flux cleaned = -0.00482667 Jy ! Component: 3950 - total flux cleaned = -0.00498989 Jy ! Component: 4000 - total flux cleaned = -0.00511395 Jy ! Component: 4050 - total flux cleaned = -0.00515572 Jy ! Total flux subtracted in 4096 components = -0.00519744 Jy ! Clean residual min=-0.003148 max=0.002637 Jy/beam ! Clean residual mean=-0.000078 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.743581 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 305 components and 0.743581 Jy ![Exited script file: muppet] wmap "J0106-4034_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.924 x 9.165 at 4.957 degrees (North through East) ! Clean map min=-0.0056139 max=0.71305 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.713053 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00081588 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343262 0.343262 0.686524 1.37305 2.7461 5.49219 10.9844 21.9688 43.9375 87.8751 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.713 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.924 x 9.165 at 4.957 degrees (North through East) ! Clean map min=-0.0056139 max=0.71305 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:59 2019