! Started logfile: J0106-4034_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:31:27 2019 obs J0106-4034_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2017_05_31_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.304274 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.337128Jy sigma=0.001913 ! Fit after self-cal, rms=0.297256Jy sigma=0.001686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=32.47 mas, bpa=-6.167 degrees ! Estimated noise=5557.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.583694 Jy ! Component: 100 - total flux cleaned = 0.714022 Jy ! Total flux subtracted in 100 components = 0.714022 Jy ! Clean residual min=-0.032534 max=0.046848 Jy/beam ! Clean residual mean=0.000144 rms=0.014959 Jy/beam ! Combined flux in latest and established models = 0.714022 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.714022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244262Jy sigma=0.000891 ! Fit after self-cal, rms=0.244252Jy sigma=0.000891 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=32.68 mas, bpa=-5.981 degrees ! Estimated noise=4905.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556842 Jy ! Component: 100 - total flux cleaned = 0.0572576 Jy ! Component: 150 - total flux cleaned = 0.0583072 Jy ! Component: 200 - total flux cleaned = 0.0543399 Jy ! Total flux subtracted in 200 components = 0.0543399 Jy ! Clean residual min=-0.012604 max=0.012618 Jy/beam ! Clean residual mean=0.000109 rms=0.005417 Jy/beam ! Combined flux in latest and established models = 0.768362 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 68 components and 0.768362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211483Jy sigma=0.000787 ! Fit after self-cal, rms=0.211300Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.10 ! LA 1.05 MK 0.99 NL 1.00* OV 1.01 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.00 ! LA 0.98 MK 0.99 NL 1.00* OV 1.04 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.04 ! LA 1.01 MK 1.03 NL 1.00* OV 0.95 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.60 ! LA 0.90 MK 1.10 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.211300Jy sigma=0.000786 ! Fit after self-cal, rms=0.113402Jy sigma=0.000623 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=32.28 mas, bpa=-5.947 degrees ! Estimated noise=4878.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00252224 Jy ! Component: 100 - total flux cleaned = -0.00222523 Jy ! Component: 150 - total flux cleaned = -0.00166153 Jy ! Component: 200 - total flux cleaned = -0.000427316 Jy ! Total flux subtracted in 200 components = -0.000427316 Jy ! Clean residual min=-0.003952 max=0.003995 Jy/beam ! Clean residual mean=0.000103 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.767934 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 106 components and 0.767935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112078Jy sigma=0.000615 ! Fit after self-cal, rms=0.111683Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111683Jy sigma=0.000615 ! Fit after self-cal, rms=0.111670Jy sigma=0.000614 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=32.3 mas, bpa=-5.952 degrees ! Estimated noise=4885.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490362 Jy ! Component: 100 - total flux cleaned = 0.00120623 Jy ! Component: 150 - total flux cleaned = 0.0013623 Jy ! Component: 200 - total flux cleaned = 0.00150726 Jy ! Total flux subtracted in 200 components = 0.00150726 Jy ! Clean residual min=-0.002304 max=0.002283 Jy/beam ! Clean residual mean=0.000035 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.769442 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 162 components and 0.769442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111176Jy sigma=0.000611 ! Fit after self-cal, rms=0.111149Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000541278 Jy ! Component: 100 - total flux cleaned = -0.00171622 Jy ! Component: 150 - total flux cleaned = -0.00231501 Jy ! Component: 200 - total flux cleaned = -0.00231737 Jy ! Total flux subtracted in 200 components = -0.00231737 Jy ! Clean residual min=-0.001968 max=0.001967 Jy/beam ! Clean residual mean=0.000020 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.767124 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 192 components and 0.767124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110912Jy sigma=0.000610 ! Fit after self-cal, rms=0.110896Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110896Jy sigma=0.000610 ! Fit after self-cal, rms=0.110855Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=32.33 mas, bpa=-5.952 degrees ! Estimated noise=4887.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000550445 Jy ! Component: 100 - total flux cleaned = -0.00010714 Jy ! Component: 150 - total flux cleaned = -0.000210042 Jy ! Component: 200 - total flux cleaned = -9.53382e-06 Jy ! Total flux subtracted in 200 components = -9.53382e-06 Jy ! Clean residual min=-0.001637 max=0.001639 Jy/beam ! Clean residual mean=0.000010 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.767115 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 238 components and 0.767115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110662Jy sigma=0.000609 ! Fit after self-cal, rms=0.110647Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.4795e-05 Jy ! Component: 100 - total flux cleaned = -0.00037185 Jy ! Component: 150 - total flux cleaned = -0.000456832 Jy ! Component: 200 - total flux cleaned = -0.000626771 Jy ! Total flux subtracted in 200 components = -0.000626771 Jy ! Clean residual min=-0.001406 max=0.001408 Jy/beam ! Clean residual mean=0.000012 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.766488 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 263 components and 0.766488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110513Jy sigma=0.000608 ! Fit after self-cal, rms=0.110503Jy sigma=0.000608 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110503Jy sigma=0.000608 ! Fit after self-cal, rms=0.110487Jy sigma=0.000608 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.28 mas, bmaj=37.91 mas, bpa=5.899 degrees ! Estimated noise=6258.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.0708e-05 Jy ! Component: 100 - total flux cleaned = -0.000568778 Jy ! Component: 150 - total flux cleaned = -0.000569836 Jy ! Component: 200 - total flux cleaned = -0.000567262 Jy ! Total flux subtracted in 200 components = -0.000567262 Jy ! Clean residual min=-0.002132 max=0.002112 Jy/beam ! Clean residual mean=0.000033 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.765921 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 292 components and 0.76592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110403Jy sigma=0.000607 ! Fit after self-cal, rms=0.110376Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162888 Jy ! Component: 100 - total flux cleaned = -0.00225715 Jy ! Component: 150 - total flux cleaned = -0.00266235 Jy ! Component: 200 - total flux cleaned = -0.00297035 Jy ! Total flux subtracted in 200 components = -0.00297035 Jy ! Clean residual min=-0.001248 max=0.001270 Jy/beam ! Clean residual mean=0.000007 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.76295 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 333 components and 0.76295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110274Jy sigma=0.000607 ! Fit after self-cal, rms=0.110269Jy sigma=0.000607 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=32.34 mas, bpa=-5.952 degrees ! Estimated noise=4888.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.388 x 32.34 at -5.952 degrees (North through East) ! Clean map min=-0.014102 max=0.72956 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110269Jy sigma=0.000607 ! Fit after self-cal, rms=0.096849Jy sigma=0.000526 ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=32.34 mas, bpa=-5.951 degrees ! Estimated noise=4890.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139136 Jy ! Component: 100 - total flux cleaned = 0.00020131 Jy ! Component: 150 - total flux cleaned = 0.000127382 Jy ! Component: 200 - total flux cleaned = -0.000381803 Jy ! Total flux subtracted in 200 components = -0.000381803 Jy ! Clean residual min=-0.001186 max=0.001183 Jy/beam ! Clean residual mean=0.000008 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.762568 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 388 components and 0.762568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096727Jy sigma=0.000525 ! Fit after self-cal, rms=0.096722Jy sigma=0.000525 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134596 Jy ! Component: 100 - total flux cleaned = -0.000977051 Jy ! Component: 150 - total flux cleaned = -0.00176988 Jy ! Component: 200 - total flux cleaned = -0.00252176 Jy ! Total flux subtracted in 200 components = -0.00252176 Jy ! Clean residual min=-0.001016 max=0.001010 Jy/beam ! Clean residual mean=0.000005 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.760047 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 418 components and 0.760047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096637Jy sigma=0.000525 ! Fit after self-cal, rms=0.096635Jy sigma=0.000525 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096635Jy sigma=0.000525 ! Fit after self-cal, rms=0.096631Jy sigma=0.000524 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=32.33 mas, bpa=-6.153 degrees ! Estimated noise=5568.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.583458 Jy ! Component: 100 - total flux cleaned = 0.711865 Jy ! Component: 150 - total flux cleaned = 0.757243 Jy ! Component: 200 - total flux cleaned = 0.766771 Jy ! Total flux subtracted in 200 components = 0.766771 Jy ! Clean residual min=-0.013318 max=0.013443 Jy/beam ! Clean residual mean=0.000114 rms=0.005298 Jy/beam ! Combined flux in latest and established models = 0.766772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.766772 Jy ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=32.35 mas, bpa=-5.952 degrees ! Estimated noise=4891.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283646 Jy ! Component: 100 - total flux cleaned = 0.00120892 Jy ! Component: 150 - total flux cleaned = -0.00204297 Jy ! Component: 200 - total flux cleaned = -0.00174878 Jy ! Total flux subtracted in 200 components = -0.00174878 Jy ! Clean residual min=-0.005330 max=0.005303 Jy/beam ! Clean residual mean=0.000037 rms=0.002407 Jy/beam ! Combined flux in latest and established models = 0.765023 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 102 components and 0.765023 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.28 mas, bmaj=37.92 mas, bpa=5.897 degrees ! Estimated noise=6261.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137191 Jy ! Component: 100 - total flux cleaned = -0.00106947 Jy ! Component: 150 - total flux cleaned = -0.00107335 Jy ! Component: 200 - total flux cleaned = -0.0015895 Jy ! Total flux subtracted in 200 components = -0.0015895 Jy ! Clean residual min=-0.004313 max=0.004386 Jy/beam ! Clean residual mean=0.000059 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.763434 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268512 Jy ! Component: 100 - total flux cleaned = -0.000811305 Jy ! Component: 150 - total flux cleaned = -0.000799313 Jy ! Component: 200 - total flux cleaned = 7.95059e-05 Jy ! Total flux subtracted in 200 components = 7.95059e-05 Jy ! Clean residual min=-0.005142 max=0.005130 Jy/beam ! Clean residual mean=0.000115 rms=0.002156 Jy/beam ! Combined flux in latest and established models = 0.763513 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 191 components and 0.763513 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=32.35 mas, bpa=-5.952 degrees ! Estimated noise=4891.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000723006 Jy ! Component: 100 - total flux cleaned = -0.000753242 Jy ! Component: 150 - total flux cleaned = -0.00121199 Jy ! Component: 200 - total flux cleaned = -0.0018325 Jy ! Total flux subtracted in 200 components = -0.0018325 Jy ! Clean residual min=-0.003308 max=0.003302 Jy/beam ! Clean residual mean=0.000018 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.76168 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 251 components and 0.76168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097663Jy sigma=0.000530 ! Fit after self-cal, rms=0.097605Jy sigma=0.000530 wmodel J0106-4034_S_2017_05_31_pus_map.mod ! Writing 251 model components to file: J0106-4034_S_2017_05_31_pus_map.mod wobs J0106-4034_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2017_05_31_pus_uvs.fits wwins J0106-4034_S_2017_05_31_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0106-4034_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 32.35 at -5.952 degrees (North through East) ! Clean map min=-0.0099817 max=0.71945 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.719447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00123523 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.515076 0.515076 1.03015 2.0603 4.1206 8.24121 16.4824 32.9648 65.9297 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.719 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 32.35 at -5.952 degrees (North through East) ! Clean map min=-0.0099817 max=0.71945 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:31:33 2019