! Started logfile: J0106-4034_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:13 2019 obs J0106-4034_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0106-4034_S_2017_04_28_pus_uva.fits ! AN table 1: 33 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.490236 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0106-4034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 2912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-4034_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.392522Jy sigma=0.017331 ! Fit after self-cal, rms=0.374633Jy sigma=0.016727 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=9.007 mas, bpa=-7.028 degrees ! Estimated noise=3750.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.424385 Jy ! Component: 100 - total flux cleaned = 0.573099 Jy ! Total flux subtracted in 100 components = 0.573099 Jy ! Clean residual min=-0.124901 max=0.126857 Jy/beam ! Clean residual mean=0.006238 rms=0.047924 Jy/beam ! Combined flux in latest and established models = 0.573099 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.573099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299467Jy sigma=0.008305 ! Fit after self-cal, rms=0.299405Jy sigma=0.008305 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=9.606 mas, bpa=-6.51 degrees ! Estimated noise=2406.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175572 Jy ! Component: 100 - total flux cleaned = 0.0130117 Jy ! Component: 150 - total flux cleaned = 0.00962879 Jy ! Component: 200 - total flux cleaned = 0.00947852 Jy ! Total flux subtracted in 200 components = 0.00947852 Jy ! Clean residual min=-0.117719 max=0.119753 Jy/beam ! Clean residual mean=0.012443 rms=0.053121 Jy/beam ! Combined flux in latest and established models = 0.582578 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.582578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262560Jy sigma=0.008438 ! Fit after self-cal, rms=0.262472Jy sigma=0.008438 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.76 KP 0.86 ! LA 0.87 MK 0.94 NL 0.99 OV 0.85 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 1.64 KP 0.81 ! LA 0.86 MK 0.94 NL 1.30 OV 0.87 ! PT 0.86 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 2.06 KP 0.85 ! LA 0.86 MK 0.99 NL 1.12 OV 0.79 ! PT 0.86 SC 1.03 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.46 KP 1.00* ! LA 0.66 MK 1.04 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.262472Jy sigma=0.008438 ! Fit after self-cal, rms=0.193533Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=8.898 mas, bpa=-5.086 degrees ! Estimated noise=2491.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00306845 Jy ! Component: 100 - total flux cleaned = -0.0030028 Jy ! Component: 150 - total flux cleaned = -0.00293575 Jy ! Component: 200 - total flux cleaned = -0.00284393 Jy ! Total flux subtracted in 200 components = -0.00284393 Jy ! Clean residual min=-0.016820 max=0.016950 Jy/beam ! Clean residual mean=0.000015 rms=0.003417 Jy/beam ! Combined flux in latest and established models = 0.579734 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.579734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183262Jy sigma=0.000726 ! Fit after self-cal, rms=0.183895Jy sigma=0.000726 ! Inverting map ! Added new window around map position (3.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363612 Jy ! Component: 100 - total flux cleaned = 0.003615 Jy ! Component: 150 - total flux cleaned = 0.00364009 Jy ! Component: 200 - total flux cleaned = 0.00415176 Jy ! Total flux subtracted in 200 components = 0.00415176 Jy ! Clean residual min=-0.013668 max=0.012877 Jy/beam ! Clean residual mean=0.000032 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.583885 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.583885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180110Jy sigma=0.000694 ! Fit after self-cal, rms=0.180121Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180121Jy sigma=0.000694 ! Fit after self-cal, rms=0.182263Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=8.875 mas, bpa=-5.123 degrees ! Estimated noise=2469.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466502 Jy ! Component: 100 - total flux cleaned = -0.000463091 Jy ! Component: 150 - total flux cleaned = 0.000120762 Jy ! Component: 200 - total flux cleaned = 0.000372146 Jy ! Total flux subtracted in 200 components = 0.000372146 Jy ! Clean residual min=-0.009186 max=0.007589 Jy/beam ! Clean residual mean=0.000031 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 0.584258 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.584258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181186Jy sigma=0.000660 ! Fit after self-cal, rms=0.181263Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770987 Jy ! Component: 100 - total flux cleaned = 0.00075926 Jy ! Component: 150 - total flux cleaned = 0.000557173 Jy ! Component: 200 - total flux cleaned = 0.000560643 Jy ! Total flux subtracted in 200 components = 0.000560643 Jy ! Clean residual min=-0.008351 max=0.007354 Jy/beam ! Clean residual mean=0.000034 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.584818 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.584818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180767Jy sigma=0.000656 ! Fit after self-cal, rms=0.180779Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180779Jy sigma=0.000656 ! Fit after self-cal, rms=0.179204Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=8.852 mas, bpa=-5.158 degrees ! Estimated noise=2459.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188542 Jy ! Component: 100 - total flux cleaned = 0.00172901 Jy ! Component: 150 - total flux cleaned = 0.00158491 Jy ! Component: 200 - total flux cleaned = 0.00144942 Jy ! Total flux subtracted in 200 components = 0.00144942 Jy ! Clean residual min=-0.007848 max=0.006949 Jy/beam ! Clean residual mean=0.000019 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.586268 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.586268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178926Jy sigma=0.000641 ! Fit after self-cal, rms=0.178924Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160739 Jy ! Component: 100 - total flux cleaned = 3.62516e-05 Jy ! Component: 150 - total flux cleaned = 3.16307e-05 Jy ! Component: 200 - total flux cleaned = 3.87412e-05 Jy ! Total flux subtracted in 200 components = 3.87412e-05 Jy ! Clean residual min=-0.007733 max=0.006693 Jy/beam ! Clean residual mean=0.000019 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.586306 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.586306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178710Jy sigma=0.000640 ! Fit after self-cal, rms=0.178719Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178719Jy sigma=0.000640 ! Fit after self-cal, rms=0.179030Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.275 mas, bmaj=30.7 mas, bpa=-1.645 degrees ! Estimated noise=3015.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110491 Jy ! Component: 100 - total flux cleaned = 0.00114906 Jy ! Component: 150 - total flux cleaned = 0.00115044 Jy ! Component: 200 - total flux cleaned = 0.00111386 Jy ! Total flux subtracted in 200 components = 0.00111386 Jy ! Clean residual min=-0.004951 max=0.005973 Jy/beam ! Clean residual mean=0.000035 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.58742 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.58742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178984Jy sigma=0.000639 ! Fit after self-cal, rms=0.178985Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46134e-05 Jy ! Component: 100 - total flux cleaned = 9.60719e-06 Jy ! Component: 150 - total flux cleaned = 1.0602e-05 Jy ! Component: 200 - total flux cleaned = -2.27962e-05 Jy ! Total flux subtracted in 200 components = -2.27962e-05 Jy ! Clean residual min=-0.004948 max=0.005903 Jy/beam ! Clean residual mean=0.000035 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.587397 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 97 components and 0.587397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178939Jy sigma=0.000639 ! Fit after self-cal, rms=0.178940Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.834 mas, bpa=-5.197 degrees ! Estimated noise=2456.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 8.834 at -5.197 degrees (North through East) ! Clean map min=-0.011586 max=0.56363 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178940Jy sigma=0.000639 ! Fit after self-cal, rms=0.180762Jy sigma=0.000582 ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=8.825 mas, bpa=-5.181 degrees ! Estimated noise=2457.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000872223 Jy ! Component: 100 - total flux cleaned = 0.000766435 Jy ! Component: 150 - total flux cleaned = 0.00057267 Jy ! Component: 200 - total flux cleaned = 0.000484357 Jy ! Total flux subtracted in 200 components = 0.000484357 Jy ! Clean residual min=-0.007292 max=0.006536 Jy/beam ! Clean residual mean=0.000009 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.587882 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.587882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180618Jy sigma=0.000581 ! Fit after self-cal, rms=0.180634Jy sigma=0.000581 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.83892e-05 Jy ! Component: 100 - total flux cleaned = -7.2143e-05 Jy ! Component: 150 - total flux cleaned = -0.000148757 Jy ! Component: 200 - total flux cleaned = -7.40086e-05 Jy ! Total flux subtracted in 200 components = -7.40086e-05 Jy ! Clean residual min=-0.007269 max=0.006328 Jy/beam ! Clean residual mean=0.000008 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.587808 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.587808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180513Jy sigma=0.000580 ! Fit after self-cal, rms=0.180522Jy sigma=0.000580 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180522Jy sigma=0.000580 ! Fit after self-cal, rms=0.180836Jy sigma=0.000580 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=8.019 mas, bpa=-4.96 degrees ! Estimated noise=4150.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.462763 Jy ! Component: 100 - total flux cleaned = 0.563676 Jy ! Component: 150 - total flux cleaned = 0.571278 Jy ! Component: 200 - total flux cleaned = 0.573141 Jy ! Total flux subtracted in 200 components = 0.573141 Jy ! Clean residual min=-0.016320 max=0.017300 Jy/beam ! Clean residual mean=-0.000007 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 0.573142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.573142 Jy ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.814 mas, bpa=-5.219 degrees ! Estimated noise=2454.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842044 Jy ! Component: 100 - total flux cleaned = 0.00942174 Jy ! Component: 150 - total flux cleaned = 0.0102441 Jy ! Component: 200 - total flux cleaned = 0.0112301 Jy ! Total flux subtracted in 200 components = 0.0112301 Jy ! Clean residual min=-0.006971 max=0.008273 Jy/beam ! Clean residual mean=-0.000007 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.584372 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.584372 Jy ! Inverting map ! Added new window around map position (-10, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432517 Jy ! Component: 100 - total flux cleaned = 0.00550554 Jy ! Component: 150 - total flux cleaned = 0.00630828 Jy ! Component: 200 - total flux cleaned = 0.00699118 Jy ! Total flux subtracted in 200 components = 0.00699118 Jy ! Clean residual min=-0.006376 max=0.005843 Jy/beam ! Clean residual mean=0.000028 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.591363 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.591363 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.268 mas, bmaj=30.63 mas, bpa=-1.631 degrees ! Estimated noise=3021.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338514 Jy ! Component: 100 - total flux cleaned = 0.000337644 Jy ! Component: 150 - total flux cleaned = 0.000295345 Jy ! Component: 200 - total flux cleaned = 0.000296777 Jy ! Total flux subtracted in 200 components = 0.000296777 Jy ! Clean residual min=-0.004400 max=0.005414 Jy/beam ! Clean residual mean=0.000052 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.59166 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32324e-05 Jy ! Component: 100 - total flux cleaned = -8.01359e-05 Jy ! Component: 150 - total flux cleaned = -0.000119602 Jy ! Component: 200 - total flux cleaned = -0.000120558 Jy ! Total flux subtracted in 200 components = -0.000120558 Jy ! Clean residual min=-0.004390 max=0.005422 Jy/beam ! Clean residual mean=0.000050 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.591539 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.591539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.814 mas, bpa=-5.219 degrees ! Estimated noise=2454.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.69798e-05 Jy ! Component: 100 - total flux cleaned = -1.49468e-05 Jy ! Component: 150 - total flux cleaned = -0.000126512 Jy ! Component: 200 - total flux cleaned = -1.73999e-05 Jy ! Total flux subtracted in 200 components = -1.73999e-05 Jy ! Clean residual min=-0.006289 max=0.005913 Jy/beam ! Clean residual mean=0.000027 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.591522 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 0.591522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180840Jy sigma=0.000579 ! Fit after self-cal, rms=0.180927Jy sigma=0.000579 wmodel J0106-4034_S_2017_04_28_pus_map.mod ! Writing 72 model components to file: J0106-4034_S_2017_04_28_pus_map.mod wobs J0106-4034_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0106-4034_S_2017_04_28_pus_uvs.fits wwins J0106-4034_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J0106-4034_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370999 Jy ! Component: 100 - total flux cleaned = -0.00047816 Jy ! Component: 150 - total flux cleaned = -0.000758481 Jy ! Component: 200 - total flux cleaned = -0.000757212 Jy ! Component: 250 - total flux cleaned = -0.000843875 Jy ! Component: 300 - total flux cleaned = -0.00101345 Jy ! Component: 350 - total flux cleaned = -0.00118053 Jy ! Component: 400 - total flux cleaned = -0.00118111 Jy ! Component: 450 - total flux cleaned = -0.00133747 Jy ! Component: 500 - total flux cleaned = -0.00125989 Jy ! Component: 550 - total flux cleaned = -0.00110943 Jy ! Component: 600 - total flux cleaned = -0.00110888 Jy ! Component: 650 - total flux cleaned = -0.00118084 Jy ! Component: 700 - total flux cleaned = -0.00103768 Jy ! Component: 750 - total flux cleaned = -0.000898018 Jy ! Component: 800 - total flux cleaned = -0.000760426 Jy ! Component: 850 - total flux cleaned = -0.000624921 Jy ! Component: 900 - total flux cleaned = -0.000492375 Jy ! Component: 950 - total flux cleaned = -0.00022913 Jy ! Component: 1000 - total flux cleaned = -0.000100501 Jy ! Component: 1050 - total flux cleaned = -9.95556e-05 Jy ! Component: 1100 - total flux cleaned = 0.000150775 Jy ! Component: 1150 - total flux cleaned = 0.000150351 Jy ! Component: 1200 - total flux cleaned = 0.000272679 Jy ! Component: 1250 - total flux cleaned = 0.00027289 Jy ! Component: 1300 - total flux cleaned = 0.000273307 Jy ! Component: 1350 - total flux cleaned = 0.000390291 Jy ! Component: 1400 - total flux cleaned = 0.000448309 Jy ! Component: 1450 - total flux cleaned = 0.000506076 Jy ! Component: 1500 - total flux cleaned = 0.000618546 Jy ! Component: 1550 - total flux cleaned = 0.000729601 Jy ! Component: 1600 - total flux cleaned = 0.000840053 Jy ! Component: 1650 - total flux cleaned = 0.000839737 Jy ! Component: 1700 - total flux cleaned = 0.0010565 Jy ! Component: 1750 - total flux cleaned = 0.00127036 Jy ! Component: 1800 - total flux cleaned = 0.00137626 Jy ! Component: 1850 - total flux cleaned = 0.00158615 Jy ! Component: 1900 - total flux cleaned = 0.00179456 Jy ! Component: 1950 - total flux cleaned = 0.0020525 Jy ! Component: 2000 - total flux cleaned = 0.0022062 Jy ! Component: 2050 - total flux cleaned = 0.00261115 Jy ! Component: 2100 - total flux cleaned = 0.0027111 Jy ! Component: 2150 - total flux cleaned = 0.00300936 Jy ! Component: 2200 - total flux cleaned = 0.00320595 Jy ! Component: 2250 - total flux cleaned = 0.00330406 Jy ! Component: 2300 - total flux cleaned = 0.00340052 Jy ! Component: 2350 - total flux cleaned = 0.00340012 Jy ! Component: 2400 - total flux cleaned = 0.00354306 Jy ! Component: 2450 - total flux cleaned = 0.00373265 Jy ! Component: 2500 - total flux cleaned = 0.00396667 Jy ! Component: 2550 - total flux cleaned = 0.00405934 Jy ! Component: 2600 - total flux cleaned = 0.00401269 Jy ! Component: 2650 - total flux cleaned = 0.0041043 Jy ! Component: 2700 - total flux cleaned = 0.00414961 Jy ! Component: 2750 - total flux cleaned = 0.00419568 Jy ! Component: 2800 - total flux cleaned = 0.00451005 Jy ! Component: 2850 - total flux cleaned = 0.00464386 Jy ! Component: 2900 - total flux cleaned = 0.00486555 Jy ! Component: 2950 - total flux cleaned = 0.0050411 Jy ! Component: 3000 - total flux cleaned = 0.00521573 Jy ! Component: 3050 - total flux cleaned = 0.00534536 Jy ! Component: 3100 - total flux cleaned = 0.00543172 Jy ! Component: 3150 - total flux cleaned = 0.00568767 Jy ! Component: 3200 - total flux cleaned = 0.00585718 Jy ! Component: 3250 - total flux cleaned = 0.00589962 Jy ! Component: 3300 - total flux cleaned = 0.00615037 Jy ! Component: 3350 - total flux cleaned = 0.00623327 Jy ! Component: 3400 - total flux cleaned = 0.00652209 Jy ! Component: 3450 - total flux cleaned = 0.00668549 Jy ! Component: 3500 - total flux cleaned = 0.00692922 Jy ! Component: 3550 - total flux cleaned = 0.00705001 Jy ! Component: 3600 - total flux cleaned = 0.00717054 Jy ! Component: 3650 - total flux cleaned = 0.0072904 Jy ! Component: 3700 - total flux cleaned = 0.00740922 Jy ! Component: 3750 - total flux cleaned = 0.00760628 Jy ! Component: 3800 - total flux cleaned = 0.00795848 Jy ! Component: 3850 - total flux cleaned = 0.00791983 Jy ! Component: 3900 - total flux cleaned = 0.00799751 Jy ! Component: 3950 - total flux cleaned = 0.00838248 Jy ! Component: 4000 - total flux cleaned = 0.00857382 Jy ! Component: 4050 - total flux cleaned = 0.00861229 Jy ! Total flux subtracted in 4096 components = 0.00883923 Jy ! Clean residual min=-0.001889 max=0.002264 Jy/beam ! Clean residual mean=0.000010 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.600361 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 348 components and 0.600361 Jy ![Exited script file: muppet] wmap "J0106-4034_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.814 at -5.219 degrees (North through East) ! Clean map min=-0.0049742 max=0.57621 Jy/beam ! Writing clean map to FITS file: J0106-4034_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.57621 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000678642 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.353331 0.353331 0.706662 1.41332 2.82665 5.6533 11.3066 22.6132 45.2264 90.4527 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.576 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.814 at -5.219 degrees (North through East) ! Clean map min=-0.0049742 max=0.57621 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-4034_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:18 2019