! Started logfile: J0106-0155_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:42 2019 obs J0106-0155_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0106-0155_S_2017_06_10_pus_uva.fits ! AN table 1: 110 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.909091 visibilities/baseline/integration-bin. ! Found source: J0106-0155 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 18000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106-0155_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 647 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.801552Jy sigma=0.007548 ! Fit after self-cal, rms=0.769609Jy sigma=0.007228 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=7.332 mas, bpa=-5.318 degrees ! Estimated noise=873.733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168108 Jy ! Component: 100 - total flux cleaned = 0.241537 Jy ! Total flux subtracted in 100 components = 0.241537 Jy ! Clean residual min=-0.017405 max=0.055260 Jy/beam ! Clean residual mean=0.000097 rms=0.004928 Jy/beam ! Combined flux in latest and established models = 0.241537 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.241537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141629Jy sigma=0.001339 ! Fit after self-cal, rms=0.140401Jy sigma=0.001328 ! Inverting map ! Added new window around map position (3.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053935 Jy ! Component: 100 - total flux cleaned = 0.081605 Jy ! Total flux subtracted in 100 components = 0.081605 Jy ! Clean residual min=-0.011523 max=0.027794 Jy/beam ! Clean residual mean=0.000057 rms=0.003201 Jy/beam ! Combined flux in latest and established models = 0.323142 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.323142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108374Jy sigma=0.001010 ! Fit after self-cal, rms=0.107691Jy sigma=0.001005 ! Inverting map ! Added new window around map position (9, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274119 Jy ! Component: 100 - total flux cleaned = 0.0450874 Jy ! Total flux subtracted in 100 components = 0.0450874 Jy ! Clean residual min=-0.009360 max=0.019994 Jy/beam ! Clean residual mean=0.000039 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.36823 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.36823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095865Jy sigma=0.000884 ! Fit after self-cal, rms=0.095353Jy sigma=0.000880 ! Inverting map ! Added new window around map position (15.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201252 Jy ! Component: 100 - total flux cleaned = 0.033967 Jy ! Total flux subtracted in 100 components = 0.033967 Jy ! Clean residual min=-0.007331 max=0.008348 Jy/beam ! Clean residual mean=0.000031 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.402197 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 63 components and 0.402197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088260Jy sigma=0.000809 ! Fit after self-cal, rms=0.087753Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.676 mas, bpa=-7.162 degrees ! Estimated noise=677.613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220124 Jy ! Component: 100 - total flux cleaned = 0.0377392 Jy ! Component: 150 - total flux cleaned = 0.0493618 Jy ! Component: 200 - total flux cleaned = 0.0581102 Jy ! Total flux subtracted in 200 components = 0.0581102 Jy ! Clean residual min=-0.006244 max=0.007667 Jy/beam ! Clean residual mean=0.000057 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.460307 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 111 components and 0.460307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080374Jy sigma=0.000730 ! Fit after self-cal, rms=0.079885Jy sigma=0.000725 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.98 KP 1.01 ! LA 0.99 MK 1.08 NL 0.93 OV 1.03 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.01 KP 0.97 ! LA 0.95 MK 0.98 NL 1.10 OV 1.06 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 0.97 ! LA 0.97 MK 1.02 NL 1.04 OV 0.97 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.97 KP 1.00* ! LA 0.93 MK 1.11 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.079885Jy sigma=0.000725 ! Fit after self-cal, rms=0.076535Jy sigma=0.000703 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.683 mas, bpa=-6.695 degrees ! Estimated noise=667.945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714052 Jy ! Component: 100 - total flux cleaned = 0.0112579 Jy ! Component: 150 - total flux cleaned = 0.0133827 Jy ! Component: 200 - total flux cleaned = 0.0144473 Jy ! Total flux subtracted in 200 components = 0.0144473 Jy ! Clean residual min=-0.003581 max=0.004667 Jy/beam ! Clean residual mean=0.000006 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.474754 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 141 components and 0.474754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075821Jy sigma=0.000696 ! Fit after self-cal, rms=0.075754Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075754Jy sigma=0.000695 ! Fit after self-cal, rms=0.075295Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.692 mas, bpa=-6.687 degrees ! Estimated noise=667.874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324124 Jy ! Component: 100 - total flux cleaned = 0.00507203 Jy ! Component: 150 - total flux cleaned = 0.00599337 Jy ! Component: 200 - total flux cleaned = 0.00663213 Jy ! Total flux subtracted in 200 components = 0.00663213 Jy ! Clean residual min=-0.002523 max=0.003070 Jy/beam ! Clean residual mean=0.000012 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.481386 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 171 components and 0.481386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075110Jy sigma=0.000685 ! Fit after self-cal, rms=0.075094Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116107 Jy ! Component: 100 - total flux cleaned = 0.00169649 Jy ! Component: 150 - total flux cleaned = 0.00214147 Jy ! Component: 200 - total flux cleaned = 0.00251461 Jy ! Total flux subtracted in 200 components = 0.00251461 Jy ! Clean residual min=-0.002346 max=0.002818 Jy/beam ! Clean residual mean=0.000009 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.483901 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 188 components and 0.483901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075031Jy sigma=0.000684 ! Fit after self-cal, rms=0.075022Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075022Jy sigma=0.000684 ! Fit after self-cal, rms=0.074891Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.682 mas, bpa=-6.639 degrees ! Estimated noise=666.524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163214 Jy ! Component: 100 - total flux cleaned = 0.00238747 Jy ! Component: 150 - total flux cleaned = 0.00281023 Jy ! Component: 200 - total flux cleaned = 0.00302273 Jy ! Total flux subtracted in 200 components = 0.00302273 Jy ! Clean residual min=-0.002347 max=0.002620 Jy/beam ! Clean residual mean=0.000011 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.486924 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 198 components and 0.486924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074824Jy sigma=0.000683 ! Fit after self-cal, rms=0.074816Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245592 Jy ! Component: 100 - total flux cleaned = 0.0035354 Jy ! Component: 150 - total flux cleaned = 0.00414681 Jy ! Component: 200 - total flux cleaned = 0.00467646 Jy ! Total flux subtracted in 200 components = 0.00467646 Jy ! Clean residual min=-0.002024 max=0.002565 Jy/beam ! Clean residual mean=0.000007 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.4916 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 228 components and 0.4916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074721Jy sigma=0.000682 ! Fit after self-cal, rms=0.074711Jy sigma=0.000682 ! Inverting map ! Added new window around map position (0, 121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229847 Jy ! Component: 100 - total flux cleaned = 0.00364504 Jy ! Component: 150 - total flux cleaned = 0.00478771 Jy ! Component: 200 - total flux cleaned = 0.00563409 Jy ! Total flux subtracted in 200 components = 0.00563409 Jy ! Clean residual min=-0.001831 max=0.001987 Jy/beam ! Clean residual mean=0.000004 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.497234 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 263 components and 0.497234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074628Jy sigma=0.000681 ! Fit after self-cal, rms=0.074627Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074627Jy sigma=0.000681 ! Fit after self-cal, rms=0.074571Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.313 mas, bmaj=14.59 mas, bpa=-9.643 degrees ! Estimated noise=831.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187946 Jy ! Component: 100 - total flux cleaned = 0.00313686 Jy ! Component: 150 - total flux cleaned = 0.00387586 Jy ! Component: 200 - total flux cleaned = 0.00442124 Jy ! Total flux subtracted in 200 components = 0.00442124 Jy ! Clean residual min=-0.001984 max=0.002249 Jy/beam ! Clean residual mean=0.000005 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.501655 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 297 components and 0.501655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074539Jy sigma=0.000680 ! Fit after self-cal, rms=0.074536Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369308 Jy ! Component: 100 - total flux cleaned = 0.000597036 Jy ! Component: 150 - total flux cleaned = 0.000744042 Jy ! Component: 200 - total flux cleaned = 0.000824887 Jy ! Total flux subtracted in 200 components = 0.000824887 Jy ! Clean residual min=-0.001953 max=0.002200 Jy/beam ! Clean residual mean=0.000004 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.50248 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 315 components and 0.50248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074523Jy sigma=0.000680 ! Fit after self-cal, rms=0.074520Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.677 mas, bpa=-6.597 degrees ! Estimated noise=666.017 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 8.677 at -6.597 degrees (North through East) ! Clean map min=-0.0016855 max=0.22706 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=7.335 mas, bpa=-4.791 degrees ! Estimated noise=865.288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168545 Jy ! Component: 100 - total flux cleaned = 0.247129 Jy ! Component: 150 - total flux cleaned = 0.293126 Jy ! Component: 200 - total flux cleaned = 0.32673 Jy ! Total flux subtracted in 200 components = 0.32673 Jy ! Clean residual min=-0.008553 max=0.019431 Jy/beam ! Clean residual mean=0.000061 rms=0.002762 Jy/beam ! Combined flux in latest and established models = 0.32673 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.32673 Jy ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.677 mas, bpa=-6.597 degrees ! Estimated noise=666.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428234 Jy ! Component: 100 - total flux cleaned = 0.0727251 Jy ! Component: 150 - total flux cleaned = 0.0942149 Jy ! Component: 200 - total flux cleaned = 0.109817 Jy ! Total flux subtracted in 200 components = 0.109817 Jy ! Clean residual min=-0.006124 max=0.009060 Jy/beam ! Clean residual mean=0.000072 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.436547 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 75 components and 0.436547 Jy ! Inverting map ! Added new window around map position (12.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115969 Jy ! Component: 100 - total flux cleaned = 0.0203504 Jy ! Component: 150 - total flux cleaned = 0.0270668 Jy ! Component: 200 - total flux cleaned = 0.0323749 Jy ! Total flux subtracted in 200 components = 0.0323749 Jy ! Clean residual min=-0.003784 max=0.003529 Jy/beam ! Clean residual mean=0.000034 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.468922 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 116 components and 0.468922 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.313 mas, bmaj=14.59 mas, bpa=-9.643 degrees ! Estimated noise=831.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742465 Jy ! Component: 100 - total flux cleaned = 0.01259 Jy ! Component: 150 - total flux cleaned = 0.016601 Jy ! Component: 200 - total flux cleaned = 0.0197893 Jy ! Total flux subtracted in 200 components = 0.0197893 Jy ! Clean residual min=-0.003135 max=0.002900 Jy/beam ! Clean residual mean=0.000027 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.488711 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025541 Jy ! Component: 100 - total flux cleaned = 0.00462797 Jy ! Component: 150 - total flux cleaned = 0.00607337 Jy ! Component: 200 - total flux cleaned = 0.00706668 Jy ! Total flux subtracted in 200 components = 0.00706668 Jy ! Clean residual min=-0.002472 max=0.002295 Jy/beam ! Clean residual mean=0.000013 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.495778 Jy ! Adding 137 model components to the UV plane model. ! The established model now contains 229 components and 0.495778 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.677 mas, bpa=-6.597 degrees ! Estimated noise=666.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117867 Jy ! Component: 100 - total flux cleaned = 0.0017295 Jy ! Component: 150 - total flux cleaned = 0.0021129 Jy ! Component: 200 - total flux cleaned = 0.00241449 Jy ! Total flux subtracted in 200 components = 0.00241449 Jy ! Clean residual min=-0.001956 max=0.001916 Jy/beam ! Clean residual mean=0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.498192 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 253 components and 0.498192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074570Jy sigma=0.000681 ! Fit after self-cal, rms=0.074540Jy sigma=0.000681 wmodel J0106-0155_S_2017_06_10_pus_map.mod ! Writing 253 model components to file: J0106-0155_S_2017_06_10_pus_map.mod wobs J0106-0155_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0106-0155_S_2017_06_10_pus_uvs.fits wwins J0106-0155_S_2017_06_10_pus_map.win ! wwins: Wrote 8 windows to J0106-0155_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347485 Jy ! Component: 100 - total flux cleaned = 0.000731823 Jy ! Component: 150 - total flux cleaned = 0.00109615 Jy ! Component: 200 - total flux cleaned = 0.00150316 Jy ! Component: 250 - total flux cleaned = 0.00164345 Jy ! Component: 300 - total flux cleaned = 0.00172432 Jy ! Component: 350 - total flux cleaned = 0.00169808 Jy ! Component: 400 - total flux cleaned = 0.00174981 Jy ! Component: 450 - total flux cleaned = 0.00172505 Jy ! Component: 500 - total flux cleaned = 0.00172525 Jy ! Component: 550 - total flux cleaned = 0.00170181 Jy ! Component: 600 - total flux cleaned = 0.00179498 Jy ! Component: 650 - total flux cleaned = 0.00181718 Jy ! Component: 700 - total flux cleaned = 0.00183911 Jy ! Component: 750 - total flux cleaned = 0.00181662 Jy ! Component: 800 - total flux cleaned = 0.00179504 Jy ! Component: 850 - total flux cleaned = 0.00175283 Jy ! Component: 900 - total flux cleaned = 0.00173236 Jy ! Component: 950 - total flux cleaned = 0.00169155 Jy ! Component: 1000 - total flux cleaned = 0.00175257 Jy ! Component: 1050 - total flux cleaned = 0.00167222 Jy ! Component: 1100 - total flux cleaned = 0.00161293 Jy ! Component: 1150 - total flux cleaned = 0.00153536 Jy ! Component: 1200 - total flux cleaned = 0.00147839 Jy ! Component: 1250 - total flux cleaned = 0.00147857 Jy ! Component: 1300 - total flux cleaned = 0.00144143 Jy ! Component: 1350 - total flux cleaned = 0.00144099 Jy ! Component: 1400 - total flux cleaned = 0.00136845 Jy ! Component: 1450 - total flux cleaned = 0.00129701 Jy ! Component: 1500 - total flux cleaned = 0.00124474 Jy ! Component: 1550 - total flux cleaned = 0.00122723 Jy ! Component: 1600 - total flux cleaned = 0.00119274 Jy ! Component: 1650 - total flux cleaned = 0.00119259 Jy ! Component: 1700 - total flux cleaned = 0.00112533 Jy ! Component: 1750 - total flux cleaned = 0.0011586 Jy ! Component: 1800 - total flux cleaned = 0.0011583 Jy ! Component: 1850 - total flux cleaned = 0.00119083 Jy ! Component: 1900 - total flux cleaned = 0.0011907 Jy ! Component: 1950 - total flux cleaned = 0.00125433 Jy ! Component: 2000 - total flux cleaned = 0.00128581 Jy ! Component: 2050 - total flux cleaned = 0.00141047 Jy ! Component: 2100 - total flux cleaned = 0.00141028 Jy ! Component: 2150 - total flux cleaned = 0.00147163 Jy ! Component: 2200 - total flux cleaned = 0.00153251 Jy ! Component: 2250 - total flux cleaned = 0.00159277 Jy ! Component: 2300 - total flux cleaned = 0.00159298 Jy ! Component: 2350 - total flux cleaned = 0.00168149 Jy ! Component: 2400 - total flux cleaned = 0.00166704 Jy ! Component: 2450 - total flux cleaned = 0.00165258 Jy ! Component: 2500 - total flux cleaned = 0.00171012 Jy ! Component: 2550 - total flux cleaned = 0.00175292 Jy ! Component: 2600 - total flux cleaned = 0.00169634 Jy ! Component: 2650 - total flux cleaned = 0.00178049 Jy ! Component: 2700 - total flux cleaned = 0.00173891 Jy ! Component: 2750 - total flux cleaned = 0.00179393 Jy ! Component: 2800 - total flux cleaned = 0.00180757 Jy ! Component: 2850 - total flux cleaned = 0.0018209 Jy ! Component: 2900 - total flux cleaned = 0.00179391 Jy ! Component: 2950 - total flux cleaned = 0.00178051 Jy ! Component: 3000 - total flux cleaned = 0.00182027 Jy ! Component: 3050 - total flux cleaned = 0.00176755 Jy ! Component: 3100 - total flux cleaned = 0.00178082 Jy ! Component: 3150 - total flux cleaned = 0.00179363 Jy ! Component: 3200 - total flux cleaned = 0.00172936 Jy ! Component: 3250 - total flux cleaned = 0.00178048 Jy ! Component: 3300 - total flux cleaned = 0.00175505 Jy ! Component: 3350 - total flux cleaned = 0.00178016 Jy ! Component: 3400 - total flux cleaned = 0.00173007 Jy ! Component: 3450 - total flux cleaned = 0.00171774 Jy ! Component: 3500 - total flux cleaned = 0.00170541 Jy ! Component: 3550 - total flux cleaned = 0.00170548 Jy ! Component: 3600 - total flux cleaned = 0.00170547 Jy ! Component: 3650 - total flux cleaned = 0.00169331 Jy ! Component: 3700 - total flux cleaned = 0.00168138 Jy ! Component: 3750 - total flux cleaned = 0.0017173 Jy ! Component: 3800 - total flux cleaned = 0.0017052 Jy ! Component: 3850 - total flux cleaned = 0.00174059 Jy ! Component: 3900 - total flux cleaned = 0.00174052 Jy ! Component: 3950 - total flux cleaned = 0.00170549 Jy ! Component: 4000 - total flux cleaned = 0.00168221 Jy ! Component: 4050 - total flux cleaned = 0.00167072 Jy ! Total flux subtracted in 4096 components = 0.00170516 Jy ! Clean residual min=-0.000770 max=0.000706 Jy/beam ! Clean residual mean=0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.499897 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 525 components and 0.499897 Jy ![Exited script file: muppet] wmap "J0106-0155_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 8.677 at -6.597 degrees (North through East) ! Clean map min=-0.00145 max=0.22668 Jy/beam ! Writing clean map to FITS file: J0106-0155_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.226677 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216943 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.287117 0.287117 0.574235 1.14847 2.29694 4.59388 9.18776 18.3755 36.751 73.5021 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.226 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 8.677 at -6.597 degrees (North through East) ! Clean map min=-0.00145 max=0.22668 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106-0155_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:48 2019