! Started logfile: J0106+2539_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:48 2019 obs J0106+2539_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0106+2539_S_2017_06_10_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966667 visibilities/baseline/integration-bin. ! Found source: J0106+2539 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0106+2539_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 605 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959429Jy sigma=0.010195 ! Fit after self-cal, rms=0.944567Jy sigma=0.010062 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=6.57 mas, bpa=-2.957 degrees ! Estimated noise=897.005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429859 Jy ! Component: 100 - total flux cleaned = 0.057718 Jy ! Total flux subtracted in 100 components = 0.057718 Jy ! Clean residual min=-0.004224 max=0.009316 Jy/beam ! Clean residual mean=-0.000000 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.057718 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.057718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071525Jy sigma=0.000712 ! Fit after self-cal, rms=0.071342Jy sigma=0.000710 ! Inverting map ! Added new window around map position (-3.5, 6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00989293 Jy ! Component: 100 - total flux cleaned = 0.0156965 Jy ! Total flux subtracted in 100 components = 0.0156965 Jy ! Clean residual min=-0.003606 max=0.005991 Jy/beam ! Clean residual mean=0.000003 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.0734146 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.0734146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069723Jy sigma=0.000690 ! Fit after self-cal, rms=0.069592Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=7.318 mas, bpa=-0.9404 degrees ! Estimated noise=550.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00629793 Jy ! Component: 100 - total flux cleaned = 0.00997663 Jy ! Component: 150 - total flux cleaned = 0.0124452 Jy ! Component: 200 - total flux cleaned = 0.0141624 Jy ! Total flux subtracted in 200 components = 0.0141624 Jy ! Clean residual min=-0.002223 max=0.004709 Jy/beam ! Clean residual mean=0.000015 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.087577 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 65 components and 0.087577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069010Jy sigma=0.000681 ! Fit after self-cal, rms=0.068926Jy sigma=0.000681 ! Inverting map ! Added new window around map position (5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425602 Jy ! Component: 100 - total flux cleaned = 0.00685045 Jy ! Component: 150 - total flux cleaned = 0.00875521 Jy ! Component: 200 - total flux cleaned = 0.0102425 Jy ! Total flux subtracted in 200 components = 0.0102425 Jy ! Clean residual min=-0.001807 max=0.002144 Jy/beam ! Clean residual mean=0.000011 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0978195 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 92 components and 0.0978195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068636Jy sigma=0.000677 ! Fit after self-cal, rms=0.068600Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 0.97 KP 1.01 ! LA 1.00 MK 1.15 NL 0.90 OV 1.08 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.99 KP 0.99 ! LA 0.97 MK 1.14 NL 1.05 OV 1.06 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.02 HN 0.96 KP 0.96 ! LA 0.97 MK 1.05 NL 1.06 OV 1.00 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.92 KP 1.00* ! LA 0.96 MK 0.79 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.068600Jy sigma=0.000677 ! Fit after self-cal, rms=0.068912Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.307 mas, bpa=-0.8943 degrees ! Estimated noise=554.117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742552 Jy ! Component: 100 - total flux cleaned = 0.00116096 Jy ! Component: 150 - total flux cleaned = 0.0014443 Jy ! Component: 200 - total flux cleaned = 0.00166425 Jy ! Total flux subtracted in 200 components = 0.00166425 Jy ! Clean residual min=-0.001771 max=0.001780 Jy/beam ! Clean residual mean=0.000007 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0994837 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 113 components and 0.0994837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068867Jy sigma=0.000674 ! Fit after self-cal, rms=0.068870Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068870Jy sigma=0.000674 ! Fit after self-cal, rms=0.068620Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.408 mas, bpa=-1.264 degrees ! Estimated noise=552.647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503676 Jy ! Component: 100 - total flux cleaned = 0.000537003 Jy ! Component: 150 - total flux cleaned = 0.000566528 Jy ! Component: 200 - total flux cleaned = 0.000541138 Jy ! Total flux subtracted in 200 components = 0.000541138 Jy ! Clean residual min=-0.001690 max=0.001545 Jy/beam ! Clean residual mean=0.000007 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.100025 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.100025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068592Jy sigma=0.000671 ! Fit after self-cal, rms=0.068655Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.97823e-05 Jy ! Component: 100 - total flux cleaned = -7.87392e-06 Jy ! Component: 150 - total flux cleaned = -5.79677e-05 Jy ! Component: 200 - total flux cleaned = -5.94443e-05 Jy ! Total flux subtracted in 200 components = -5.94443e-05 Jy ! Clean residual min=-0.001663 max=0.001484 Jy/beam ! Clean residual mean=0.000007 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0999654 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 0.0999654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068635Jy sigma=0.000670 ! Fit after self-cal, rms=0.068633Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068633Jy sigma=0.000670 ! Fit after self-cal, rms=0.068562Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=7.424 mas, bpa=-1.406 degrees ! Estimated noise=550.869 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253931 Jy ! Component: 100 - total flux cleaned = 0.000310191 Jy ! Component: 150 - total flux cleaned = 0.000265727 Jy ! Component: 200 - total flux cleaned = 0.000265713 Jy ! Total flux subtracted in 200 components = 0.000265713 Jy ! Clean residual min=-0.001675 max=0.001449 Jy/beam ! Clean residual mean=0.000007 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.100231 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 137 components and 0.100231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068545Jy sigma=0.000670 ! Fit after self-cal, rms=0.068551Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.02022e-05 Jy ! Component: 100 - total flux cleaned = -2.68992e-07 Jy ! Component: 150 - total flux cleaned = -2.9662e-07 Jy ! Component: 200 - total flux cleaned = 1.75316e-05 Jy ! Total flux subtracted in 200 components = 1.75316e-05 Jy ! Clean residual min=-0.001649 max=0.001422 Jy/beam ! Clean residual mean=0.000007 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.100249 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 0.100249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068539Jy sigma=0.000670 ! Fit after self-cal, rms=0.068533Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068533Jy sigma=0.000670 ! Fit after self-cal, rms=0.068254Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.31 mas, bmaj=10.66 mas, bpa=-6.355 degrees ! Estimated noise=670.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623237 Jy ! Component: 100 - total flux cleaned = 0.000673863 Jy ! Component: 150 - total flux cleaned = 0.000703453 Jy ! Component: 200 - total flux cleaned = 0.000742839 Jy ! Total flux subtracted in 200 components = 0.000742839 Jy ! Clean residual min=-0.001735 max=0.001782 Jy/beam ! Clean residual mean=0.000015 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.100991 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 152 components and 0.100991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068249Jy sigma=0.000670 ! Fit after self-cal, rms=0.068246Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011717 Jy ! Component: 100 - total flux cleaned = 0.00010354 Jy ! Component: 150 - total flux cleaned = 0.000103752 Jy ! Component: 200 - total flux cleaned = 0.000103531 Jy ! Total flux subtracted in 200 components = 0.000103531 Jy ! Clean residual min=-0.001736 max=0.001759 Jy/beam ! Clean residual mean=0.000014 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.101095 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 163 components and 0.101095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068243Jy sigma=0.000670 ! Fit after self-cal, rms=0.068242Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=7.429 mas, bpa=-1.493 degrees ! Estimated noise=549.373 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.445 x 7.429 at -1.493 degrees (North through East) ! Clean map min=-0.0016005 max=0.051254 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=6.715 mas, bpa=-2.967 degrees ! Estimated noise=908.466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04233 Jy ! Component: 100 - total flux cleaned = 0.0601738 Jy ! Component: 150 - total flux cleaned = 0.0701788 Jy ! Component: 200 - total flux cleaned = 0.0769712 Jy ! Total flux subtracted in 200 components = 0.0769712 Jy ! Clean residual min=-0.003386 max=0.003798 Jy/beam ! Clean residual mean=0.000004 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.0769712 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0769712 Jy ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=7.429 mas, bpa=-1.493 degrees ! Estimated noise=549.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619767 Jy ! Component: 100 - total flux cleaned = 0.0103554 Jy ! Component: 150 - total flux cleaned = 0.0134355 Jy ! Component: 200 - total flux cleaned = 0.0158173 Jy ! Total flux subtracted in 200 components = 0.0158173 Jy ! Clean residual min=-0.001972 max=0.001825 Jy/beam ! Clean residual mean=0.000010 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0927885 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 64 components and 0.0927885 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.31 mas, bmaj=10.66 mas, bpa=-6.355 degrees ! Estimated noise=670.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282352 Jy ! Component: 100 - total flux cleaned = 0.00465298 Jy ! Component: 150 - total flux cleaned = 0.00590948 Jy ! Component: 200 - total flux cleaned = 0.00680559 Jy ! Total flux subtracted in 200 components = 0.00680559 Jy ! Clean residual min=-0.001862 max=0.001747 Jy/beam ! Clean residual mean=0.000015 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0995941 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623518 Jy ! Component: 100 - total flux cleaned = 0.000788169 Jy ! Component: 150 - total flux cleaned = 0.000896078 Jy ! Component: 200 - total flux cleaned = 0.000992153 Jy ! Total flux subtracted in 200 components = 0.000992153 Jy ! Clean residual min=-0.001799 max=0.001736 Jy/beam ! Clean residual mean=0.000014 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.100586 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 114 components and 0.100586 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=7.429 mas, bpa=-1.493 degrees ! Estimated noise=549.373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010763 Jy ! Component: 100 - total flux cleaned = 0.000139429 Jy ! Component: 150 - total flux cleaned = 0.000139033 Jy ! Component: 200 - total flux cleaned = 0.000138465 Jy ! Total flux subtracted in 200 components = 0.000138465 Jy ! Clean residual min=-0.001578 max=0.001522 Jy/beam ! Clean residual mean=0.000007 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.100725 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 128 components and 0.100725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068257Jy sigma=0.000670 ! Fit after self-cal, rms=0.068223Jy sigma=0.000670 wmodel J0106+2539_S_2017_06_10_pus_map.mod ! Writing 128 model components to file: J0106+2539_S_2017_06_10_pus_map.mod wobs J0106+2539_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0106+2539_S_2017_06_10_pus_uvs.fits wwins J0106+2539_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J0106+2539_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444418 Jy ! Component: 100 - total flux cleaned = -0.000791446 Jy ! Component: 150 - total flux cleaned = -0.000944493 Jy ! Component: 200 - total flux cleaned = -0.00113922 Jy ! Component: 250 - total flux cleaned = -0.00125642 Jy ! Component: 300 - total flux cleaned = -0.00137057 Jy ! Component: 350 - total flux cleaned = -0.00139285 Jy ! Component: 400 - total flux cleaned = -0.00143641 Jy ! Component: 450 - total flux cleaned = -0.00147869 Jy ! Component: 500 - total flux cleaned = -0.00158243 Jy ! Component: 550 - total flux cleaned = -0.00164352 Jy ! Component: 600 - total flux cleaned = -0.00166354 Jy ! Component: 650 - total flux cleaned = -0.00174242 Jy ! Component: 700 - total flux cleaned = -0.00180061 Jy ! Component: 750 - total flux cleaned = -0.00189594 Jy ! Component: 800 - total flux cleaned = -0.00198957 Jy ! Component: 850 - total flux cleaned = -0.00202631 Jy ! Component: 900 - total flux cleaned = -0.00213511 Jy ! Component: 950 - total flux cleaned = -0.00211752 Jy ! Component: 1000 - total flux cleaned = -0.00217067 Jy ! Component: 1050 - total flux cleaned = -0.00220536 Jy ! Component: 1100 - total flux cleaned = -0.00222288 Jy ! Component: 1150 - total flux cleaned = -0.00223991 Jy ! Component: 1200 - total flux cleaned = -0.00227363 Jy ! Component: 1250 - total flux cleaned = -0.00227361 Jy ! Component: 1300 - total flux cleaned = -0.00230646 Jy ! Component: 1350 - total flux cleaned = -0.00225791 Jy ! Component: 1400 - total flux cleaned = -0.00232198 Jy ! Component: 1450 - total flux cleaned = -0.00230637 Jy ! Component: 1500 - total flux cleaned = -0.00227507 Jy ! Component: 1550 - total flux cleaned = -0.00233682 Jy ! Component: 1600 - total flux cleaned = -0.00236754 Jy ! Component: 1650 - total flux cleaned = -0.002322 Jy ! Component: 1700 - total flux cleaned = -0.002307 Jy ! Component: 1750 - total flux cleaned = -0.00235155 Jy ! Component: 1800 - total flux cleaned = -0.00230749 Jy ! Component: 1850 - total flux cleaned = -0.0022929 Jy ! Component: 1900 - total flux cleaned = -0.00235071 Jy ! Component: 1950 - total flux cleaned = -0.00237922 Jy ! Component: 2000 - total flux cleaned = -0.00246389 Jy ! Component: 2050 - total flux cleaned = -0.00244969 Jy ! Component: 2100 - total flux cleaned = -0.00243597 Jy ! Component: 2150 - total flux cleaned = -0.00243588 Jy ! Component: 2200 - total flux cleaned = -0.00247669 Jy ! Component: 2250 - total flux cleaned = -0.00249021 Jy ! Component: 2300 - total flux cleaned = -0.00253039 Jy ! Component: 2350 - total flux cleaned = -0.00253038 Jy ! Component: 2400 - total flux cleaned = -0.00262221 Jy ! Component: 2450 - total flux cleaned = -0.00263516 Jy ! Component: 2500 - total flux cleaned = -0.00263526 Jy ! Component: 2550 - total flux cleaned = -0.0026481 Jy ! Component: 2600 - total flux cleaned = -0.00272412 Jy ! Component: 2650 - total flux cleaned = -0.00273664 Jy ! Component: 2700 - total flux cleaned = -0.00278646 Jy ! Component: 2750 - total flux cleaned = -0.00282345 Jy ! Component: 2800 - total flux cleaned = -0.00276202 Jy ! Component: 2850 - total flux cleaned = -0.00278661 Jy ! Component: 2900 - total flux cleaned = -0.00281057 Jy ! Component: 2950 - total flux cleaned = -0.00279846 Jy ! Component: 3000 - total flux cleaned = -0.00279836 Jy ! Component: 3050 - total flux cleaned = -0.00276293 Jy ! Component: 3100 - total flux cleaned = -0.002763 Jy ! Component: 3150 - total flux cleaned = -0.00276304 Jy ! Component: 3200 - total flux cleaned = -0.00275139 Jy ! Component: 3250 - total flux cleaned = -0.00272828 Jy ! Component: 3300 - total flux cleaned = -0.00269411 Jy ! Component: 3350 - total flux cleaned = -0.00269399 Jy ! Component: 3400 - total flux cleaned = -0.00266029 Jy ! Component: 3450 - total flux cleaned = -0.0026715 Jy ! Component: 3500 - total flux cleaned = -0.00269379 Jy ! Component: 3550 - total flux cleaned = -0.00268283 Jy ! Component: 3600 - total flux cleaned = -0.00273767 Jy ! Component: 3650 - total flux cleaned = -0.00269403 Jy ! Component: 3700 - total flux cleaned = -0.002694 Jy ! Component: 3750 - total flux cleaned = -0.0027048 Jy ! Component: 3800 - total flux cleaned = -0.00272614 Jy ! Component: 3850 - total flux cleaned = -0.00270489 Jy ! Component: 3900 - total flux cleaned = -0.00273673 Jy ! Component: 3950 - total flux cleaned = -0.00270523 Jy ! Component: 4000 - total flux cleaned = -0.00274718 Jy ! Component: 4050 - total flux cleaned = -0.00275758 Jy ! Total flux subtracted in 4096 components = -0.0027782 Jy ! Clean residual min=-0.000714 max=0.000635 Jy/beam ! Clean residual mean=0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.0979465 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 433 components and 0.0979465 Jy ![Exited script file: muppet] wmap "J0106+2539_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.445 x 7.429 at -1.493 degrees (North through East) ! Clean map min=-0.0011945 max=0.050958 Jy/beam ! Writing clean map to FITS file: J0106+2539_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0509579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189729 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11697 1.11697 2.23395 4.46789 8.93579 17.8716 35.7431 71.4863 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.445 x 7.429 at -1.493 degrees (North through East) ! Clean map min=-0.0011945 max=0.050958 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0106+2539_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:54 2019