! Started logfile: J0105+5125_S_2017_05_01_pus_uvs.log on Wed May 1 18:23:48 2019 obs J0105+5125_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0105+5125_S_2017_05_01_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.907001 visibilities/baseline/integration-bin. ! Found source: J0105+5125 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 28244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0105+5125_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 773 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758935Jy sigma=0.006443 ! Fit after self-cal, rms=0.732060Jy sigma=0.006237 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=4.311 mas, bpa=16.59 degrees ! Estimated noise=1012.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208853 Jy ! Component: 100 - total flux cleaned = 0.298489 Jy ! Total flux subtracted in 100 components = 0.298489 Jy ! Clean residual min=-0.014866 max=0.044095 Jy/beam ! Clean residual mean=0.000050 rms=0.004889 Jy/beam ! Combined flux in latest and established models = 0.298489 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.298489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141470Jy sigma=0.001158 ! Fit after self-cal, rms=0.139395Jy sigma=0.001141 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539461 Jy ! Component: 100 - total flux cleaned = 0.0835052 Jy ! Total flux subtracted in 100 components = 0.0835052 Jy ! Clean residual min=-0.010459 max=0.023457 Jy/beam ! Clean residual mean=0.000025 rms=0.002833 Jy/beam ! Combined flux in latest and established models = 0.381994 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.381994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110162Jy sigma=0.000862 ! Fit after self-cal, rms=0.109052Jy sigma=0.000852 ! Inverting map ! Added new window around map position (-2.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246952 Jy ! Component: 100 - total flux cleaned = 0.039834 Jy ! Total flux subtracted in 100 components = 0.039834 Jy ! Clean residual min=-0.008260 max=0.021936 Jy/beam ! Clean residual mean=0.000013 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.421828 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.421828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101398Jy sigma=0.000780 ! Fit after self-cal, rms=0.100875Jy sigma=0.000775 ! Inverting map ! Added new window around map position (8.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201091 Jy ! Component: 100 - total flux cleaned = 0.0317667 Jy ! Total flux subtracted in 100 components = 0.0317667 Jy ! Clean residual min=-0.006059 max=0.006786 Jy/beam ! Clean residual mean=0.000007 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.453595 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.453595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096108Jy sigma=0.000732 ! Fit after self-cal, rms=0.095865Jy sigma=0.000729 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.412 mas, bmaj=5.316 mas, bpa=18.55 degrees ! Estimated noise=550.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117186 Jy ! Component: 100 - total flux cleaned = 0.0187863 Jy ! Component: 150 - total flux cleaned = 0.023576 Jy ! Component: 200 - total flux cleaned = 0.0268977 Jy ! Total flux subtracted in 200 components = 0.0268977 Jy ! Clean residual min=-0.004185 max=0.003916 Jy/beam ! Clean residual mean=0.000005 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.480493 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 75 components and 0.480493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094151Jy sigma=0.000715 ! Fit after self-cal, rms=0.094017Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 1.01 KP 1.02 ! LA 0.99 MK 1.01 NL 0.94 OV 1.03 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.06 KP 0.98 ! LA 0.95 MK 1.02 NL 0.99 OV 1.03 ! PT 0.99 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.06 KP 1.01 ! LA 1.00 MK 1.06 NL 1.00 OV 0.97 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.08 HN 1.00 KP 1.00* ! LA 1.05 MK 1.08 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.094017Jy sigma=0.000714 ! Fit after self-cal, rms=0.094906Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=5.364 mas, bpa=18.86 degrees ! Estimated noise=554.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000620909 Jy ! Component: 100 - total flux cleaned = 0.00127534 Jy ! Component: 150 - total flux cleaned = 0.00136377 Jy ! Component: 200 - total flux cleaned = 0.00136889 Jy ! Total flux subtracted in 200 components = 0.00136889 Jy ! Clean residual min=-0.003367 max=0.002950 Jy/beam ! Clean residual mean=0.000007 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.481862 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.481862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094680Jy sigma=0.000696 ! Fit after self-cal, rms=0.094645Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094645Jy sigma=0.000696 ! Fit after self-cal, rms=0.095498Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.437 mas, bmaj=5.378 mas, bpa=18.44 degrees ! Estimated noise=555.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048679 Jy ! Component: 100 - total flux cleaned = 0.000822536 Jy ! Component: 150 - total flux cleaned = 0.00089177 Jy ! Component: 200 - total flux cleaned = 0.000896483 Jy ! Total flux subtracted in 200 components = 0.000896483 Jy ! Clean residual min=-0.002717 max=0.002294 Jy/beam ! Clean residual mean=-0.000005 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.482758 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.482758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095342Jy sigma=0.000690 ! Fit after self-cal, rms=0.095321Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.8844e-05 Jy ! Component: 100 - total flux cleaned = -9.28413e-05 Jy ! Component: 150 - total flux cleaned = -4.07648e-05 Jy ! Component: 200 - total flux cleaned = 5.91224e-06 Jy ! Total flux subtracted in 200 components = 5.91224e-06 Jy ! Clean residual min=-0.002445 max=0.002122 Jy/beam ! Clean residual mean=-0.000005 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.482764 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.482764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095223Jy sigma=0.000689 ! Fit after self-cal, rms=0.095202Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095202Jy sigma=0.000689 ! Fit after self-cal, rms=0.095729Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.439 mas, bmaj=5.389 mas, bpa=18.59 degrees ! Estimated noise=557.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837443 Jy ! Component: 100 - total flux cleaned = 0.000720429 Jy ! Component: 150 - total flux cleaned = 0.000767923 Jy ! Component: 200 - total flux cleaned = 0.000765908 Jy ! Total flux subtracted in 200 components = 0.000765908 Jy ! Clean residual min=-0.002242 max=0.002014 Jy/beam ! Clean residual mean=-0.000005 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.48353 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 0.48353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095634Jy sigma=0.000688 ! Fit after self-cal, rms=0.095623Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.05766e-05 Jy ! Component: 100 - total flux cleaned = -0.00012233 Jy ! Component: 150 - total flux cleaned = -0.000123726 Jy ! Component: 200 - total flux cleaned = -0.000158765 Jy ! Total flux subtracted in 200 components = -0.000158765 Jy ! Clean residual min=-0.002047 max=0.001901 Jy/beam ! Clean residual mean=-0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.483371 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.483371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095570Jy sigma=0.000688 ! Fit after self-cal, rms=0.095559Jy sigma=0.000688 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095559Jy sigma=0.000688 ! Fit after self-cal, rms=0.096117Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=8.991 mas, bpa=24.78 degrees ! Estimated noise=652.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515168 Jy ! Component: 100 - total flux cleaned = 0.000692885 Jy ! Component: 150 - total flux cleaned = 0.000848533 Jy ! Component: 200 - total flux cleaned = 0.000866706 Jy ! Total flux subtracted in 200 components = 0.000866706 Jy ! Clean residual min=-0.001694 max=0.001564 Jy/beam ! Clean residual mean=-0.000009 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.484238 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 124 components and 0.484238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096088Jy sigma=0.000687 ! Fit after self-cal, rms=0.096080Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28333e-05 Jy ! Component: 100 - total flux cleaned = 3.67325e-05 Jy ! Component: 150 - total flux cleaned = 6.78741e-05 Jy ! Component: 200 - total flux cleaned = 8.14003e-05 Jy ! Total flux subtracted in 200 components = 8.14003e-05 Jy ! Clean residual min=-0.001656 max=0.001501 Jy/beam ! Clean residual mean=-0.000009 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.484319 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 125 components and 0.484319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096063Jy sigma=0.000687 ! Fit after self-cal, rms=0.096056Jy sigma=0.000687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.439 mas, bmaj=5.401 mas, bpa=18.77 degrees ! Estimated noise=558.805 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.439 x 5.401 at 18.77 degrees (North through East) ! Clean map min=-0.0018113 max=0.25165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=4.385 mas, bpa=17.62 degrees ! Estimated noise=1035.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220793 Jy ! Component: 100 - total flux cleaned = 0.315239 Jy ! Component: 150 - total flux cleaned = 0.362866 Jy ! Component: 200 - total flux cleaned = 0.392746 Jy ! Total flux subtracted in 200 components = 0.392746 Jy ! Clean residual min=-0.006934 max=0.016421 Jy/beam ! Clean residual mean=0.000023 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.392746 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.392746 Jy ! Inverting map and beam ! Estimated beam: bmin=4.439 mas, bmaj=5.401 mas, bpa=18.77 degrees ! Estimated noise=558.805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292587 Jy ! Component: 100 - total flux cleaned = 0.0481681 Jy ! Component: 150 - total flux cleaned = 0.0610001 Jy ! Component: 200 - total flux cleaned = 0.0699168 Jy ! Total flux subtracted in 200 components = 0.0699168 Jy ! Clean residual min=-0.002516 max=0.005077 Jy/beam ! Clean residual mean=-0.000004 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.462663 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 59 components and 0.462663 Jy ! Inverting map ! Added new window around map position (4, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628541 Jy ! Component: 100 - total flux cleaned = 0.010766 Jy ! Component: 150 - total flux cleaned = 0.0140304 Jy ! Component: 200 - total flux cleaned = 0.0164854 Jy ! Total flux subtracted in 200 components = 0.0164854 Jy ! Clean residual min=-0.001733 max=0.001965 Jy/beam ! Clean residual mean=-0.000004 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.479148 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 83 components and 0.479148 Jy ! Inverting map ! Added new window around map position (-116, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202254 Jy ! Component: 100 - total flux cleaned = 0.00349604 Jy ! Component: 150 - total flux cleaned = 0.00420584 Jy ! Component: 200 - total flux cleaned = 0.00448591 Jy ! Total flux subtracted in 200 components = 0.00448591 Jy ! Clean residual min=-0.001688 max=0.001517 Jy/beam ! Clean residual mean=-0.000006 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.483634 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.483634 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=8.991 mas, bpa=24.78 degrees ! Estimated noise=652.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548743 Jy ! Component: 100 - total flux cleaned = 0.000593671 Jy ! Component: 150 - total flux cleaned = 0.000650181 Jy ! Component: 200 - total flux cleaned = 0.00072793 Jy ! Total flux subtracted in 200 components = 0.00072793 Jy ! Clean residual min=-0.001608 max=0.001523 Jy/beam ! Clean residual mean=-0.000008 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.484362 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.83677e-05 Jy ! Component: 100 - total flux cleaned = 0.000130284 Jy ! Component: 150 - total flux cleaned = 0.000164616 Jy ! Component: 200 - total flux cleaned = 0.000185315 Jy ! Total flux subtracted in 200 components = 0.000185315 Jy ! Clean residual min=-0.001590 max=0.001529 Jy/beam ! Clean residual mean=-0.000008 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.484547 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 128 components and 0.484547 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.439 mas, bmaj=5.401 mas, bpa=18.77 degrees ! Estimated noise=558.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.27555e-06 Jy ! Component: 100 - total flux cleaned = -2.85192e-05 Jy ! Component: 150 - total flux cleaned = -2.86082e-05 Jy ! Component: 200 - total flux cleaned = -5.24586e-05 Jy ! Total flux subtracted in 200 components = -5.24586e-05 Jy ! Clean residual min=-0.001634 max=0.001535 Jy/beam ! Clean residual mean=-0.000004 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.484495 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 145 components and 0.484495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095902Jy sigma=0.000686 ! Fit after self-cal, rms=0.095876Jy sigma=0.000686 wmodel J0105+5125_S_2017_05_01_pus_map.mod ! Writing 145 model components to file: J0105+5125_S_2017_05_01_pus_map.mod wobs J0105+5125_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0105+5125_S_2017_05_01_pus_uvs.fits wwins J0105+5125_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J0105+5125_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131091 Jy ! Component: 100 - total flux cleaned = -0.000268451 Jy ! Component: 150 - total flux cleaned = -0.000471899 Jy ! Component: 200 - total flux cleaned = -0.000543544 Jy ! Component: 250 - total flux cleaned = -0.000543258 Jy ! Component: 300 - total flux cleaned = -0.000565359 Jy ! Component: 350 - total flux cleaned = -0.000500048 Jy ! Component: 400 - total flux cleaned = -0.000521312 Jy ! Component: 450 - total flux cleaned = -0.000583599 Jy ! Component: 500 - total flux cleaned = -0.000562763 Jy ! Component: 550 - total flux cleaned = -0.000643549 Jy ! Component: 600 - total flux cleaned = -0.000663153 Jy ! Component: 650 - total flux cleaned = -0.000701933 Jy ! Component: 700 - total flux cleaned = -0.000759724 Jy ! Component: 750 - total flux cleaned = -0.00077902 Jy ! Component: 800 - total flux cleaned = -0.000910493 Jy ! Component: 850 - total flux cleaned = -0.000929079 Jy ! Component: 900 - total flux cleaned = -0.00100239 Jy ! Component: 950 - total flux cleaned = -0.00103886 Jy ! Component: 1000 - total flux cleaned = -0.00111024 Jy ! Component: 1050 - total flux cleaned = -0.00116296 Jy ! Component: 1100 - total flux cleaned = -0.00121511 Jy ! Component: 1150 - total flux cleaned = -0.00121488 Jy ! Component: 1200 - total flux cleaned = -0.00128297 Jy ! Component: 1250 - total flux cleaned = -0.00124907 Jy ! Component: 1300 - total flux cleaned = -0.00128279 Jy ! Component: 1350 - total flux cleaned = -0.00123311 Jy ! Component: 1400 - total flux cleaned = -0.00124972 Jy ! Component: 1450 - total flux cleaned = -0.00126607 Jy ! Component: 1500 - total flux cleaned = -0.00131431 Jy ! Component: 1550 - total flux cleaned = -0.00123496 Jy ! Component: 1600 - total flux cleaned = -0.00121952 Jy ! Component: 1650 - total flux cleaned = -0.00121962 Jy ! Component: 1700 - total flux cleaned = -0.00120415 Jy ! Component: 1750 - total flux cleaned = -0.00121924 Jy ! Component: 1800 - total flux cleaned = -0.00114351 Jy ! Component: 1850 - total flux cleaned = -0.00112866 Jy ! Component: 1900 - total flux cleaned = -0.00114367 Jy ! Component: 1950 - total flux cleaned = -0.00111403 Jy ! Component: 2000 - total flux cleaned = -0.00114329 Jy ! Component: 2050 - total flux cleaned = -0.0011723 Jy ! Component: 2100 - total flux cleaned = -0.00108599 Jy ! Component: 2150 - total flux cleaned = -0.00114334 Jy ! Component: 2200 - total flux cleaned = -0.00115735 Jy ! Component: 2250 - total flux cleaned = -0.00114329 Jy ! Component: 2300 - total flux cleaned = -0.00111545 Jy ! Component: 2350 - total flux cleaned = -0.00112919 Jy ! Component: 2400 - total flux cleaned = -0.0011429 Jy ! Component: 2450 - total flux cleaned = -0.00112921 Jy ! Component: 2500 - total flux cleaned = -0.00111567 Jy ! Component: 2550 - total flux cleaned = -0.00106213 Jy ! Component: 2600 - total flux cleaned = -0.00110207 Jy ! Component: 2650 - total flux cleaned = -0.00107569 Jy ! Component: 2700 - total flux cleaned = -0.00103644 Jy ! Component: 2750 - total flux cleaned = -0.00104948 Jy ! Component: 2800 - total flux cleaned = -0.00101072 Jy ! Component: 2850 - total flux cleaned = -0.00103641 Jy ! Component: 2900 - total flux cleaned = -0.000985372 Jy ! Component: 2950 - total flux cleaned = -0.000960113 Jy ! Component: 3000 - total flux cleaned = -0.000947474 Jy ! Component: 3050 - total flux cleaned = -0.000960064 Jy ! Component: 3100 - total flux cleaned = -0.000897888 Jy ! Component: 3150 - total flux cleaned = -0.00095963 Jy ! Component: 3200 - total flux cleaned = -0.000984178 Jy ! Component: 3250 - total flux cleaned = -0.000996416 Jy ! Component: 3300 - total flux cleaned = -0.000972257 Jy ! Component: 3350 - total flux cleaned = -0.000936319 Jy ! Component: 3400 - total flux cleaned = -0.000960348 Jy ! Component: 3450 - total flux cleaned = -0.000972112 Jy ! Component: 3500 - total flux cleaned = -0.000948532 Jy ! Component: 3550 - total flux cleaned = -0.000972008 Jy ! Component: 3600 - total flux cleaned = -0.000913639 Jy ! Component: 3650 - total flux cleaned = -0.000948442 Jy ! Component: 3700 - total flux cleaned = -0.000925433 Jy ! Component: 3750 - total flux cleaned = -0.000890961 Jy ! Component: 3800 - total flux cleaned = -0.000890965 Jy ! Component: 3850 - total flux cleaned = -0.000890884 Jy ! Component: 3900 - total flux cleaned = -0.000834474 Jy ! Component: 3950 - total flux cleaned = -0.00081203 Jy ! Component: 4000 - total flux cleaned = -0.00080089 Jy ! Component: 4050 - total flux cleaned = -0.000800921 Jy ! Total flux subtracted in 4096 components = -0.000734741 Jy ! Clean residual min=-0.000669 max=0.000690 Jy/beam ! Clean residual mean=-0.000002 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.48376 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 435 components and 0.48376 Jy ![Exited script file: muppet] wmap "J0105+5125_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.439 x 5.401 at 18.77 degrees (North through East) ! Clean map min=-0.0011721 max=0.25115 Jy/beam ! Writing clean map to FITS file: J0105+5125_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.251152 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202833 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.242283 0.242283 0.484566 0.969133 1.93827 3.87653 7.75306 15.5061 31.0122 62.0245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.439 x 5.401 at 18.77 degrees (North through East) ! Clean map min=-0.0011721 max=0.25115 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0105+5125_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:23:57 2019