! Started logfile: J0105+0600_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:50 2019 obs J0105+0600_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0105+0600_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.982375 visibilities/baseline/integration-bin. ! Found source: J0105+0600 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 20512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0105+0600_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930850Jy sigma=0.009034 ! Fit after self-cal, rms=0.904892Jy sigma=0.008788 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=12.61 mas, bpa=-19.14 degrees ! Estimated noise=1160 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743315 Jy ! Component: 100 - total flux cleaned = 0.0906768 Jy ! Total flux subtracted in 100 components = 0.0906768 Jy ! Clean residual min=-0.006947 max=0.007747 Jy/beam ! Clean residual mean=-0.000008 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.0906768 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0906768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085577Jy sigma=0.000746 ! Fit after self-cal, rms=0.085568Jy sigma=0.000746 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=12.79 mas, bpa=-18.42 degrees ! Estimated noise=591.841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087562 Jy ! Component: 100 - total flux cleaned = 0.014193 Jy ! Component: 150 - total flux cleaned = 0.017847 Jy ! Component: 200 - total flux cleaned = 0.0203954 Jy ! Total flux subtracted in 200 components = 0.0203954 Jy ! Clean residual min=-0.004617 max=0.006367 Jy/beam ! Clean residual mean=-0.000005 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.111072 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.111072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084541Jy sigma=0.000735 ! Fit after self-cal, rms=0.084560Jy sigma=0.000735 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.88 HN 0.94 KP 1.08 ! LA 1.02 MK 1.04 NL 0.95 OV 1.00 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.89 HN 0.97 KP 1.07 ! LA 1.00 MK 1.05 NL 1.03 OV 1.01 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.95 KP 1.05 ! LA 0.80 MK 1.00 NL 1.25 OV 0.91 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.92 KP 1.00* ! LA 0.95 MK 1.18 NL 1.00* OV 1.00* ! PT 0.88 ! ! ! Fit before self-cal, rms=0.084560Jy sigma=0.000735 ! Fit after self-cal, rms=0.084546Jy sigma=0.000725 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=13.25 mas, bpa=-18.34 degrees ! Estimated noise=594.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378729 Jy ! Component: 100 - total flux cleaned = -0.000304027 Jy ! Component: 150 - total flux cleaned = -0.000299603 Jy ! Component: 200 - total flux cleaned = -0.00041038 Jy ! Total flux subtracted in 200 components = -0.00041038 Jy ! Clean residual min=-0.004045 max=0.004173 Jy/beam ! Clean residual mean=0.000001 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.110662 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.110662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084409Jy sigma=0.000724 ! Fit after self-cal, rms=0.084516Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084516Jy sigma=0.000723 ! Fit after self-cal, rms=0.085007Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=13.1 mas, bpa=-18.39 degrees ! Estimated noise=593.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000939143 Jy ! Component: 100 - total flux cleaned = -0.00118989 Jy ! Component: 150 - total flux cleaned = -0.00129533 Jy ! Component: 200 - total flux cleaned = -0.00138494 Jy ! Total flux subtracted in 200 components = -0.00138494 Jy ! Clean residual min=-0.001712 max=0.001851 Jy/beam ! Clean residual mean=0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.109277 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.109277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084986Jy sigma=0.000714 ! Fit after self-cal, rms=0.085082Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-63, -75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116664 Jy ! Component: 100 - total flux cleaned = 0.00135683 Jy ! Component: 150 - total flux cleaned = 0.00147743 Jy ! Component: 200 - total flux cleaned = 0.00160613 Jy ! Total flux subtracted in 200 components = 0.00160613 Jy ! Clean residual min=-0.001618 max=0.001649 Jy/beam ! Clean residual mean=0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.110883 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.110883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085042Jy sigma=0.000713 ! Fit after self-cal, rms=0.085041Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085041Jy sigma=0.000713 ! Fit after self-cal, rms=0.085649Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.773 mas, bmaj=13.13 mas, bpa=-18.39 degrees ! Estimated noise=593.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242066 Jy ! Component: 100 - total flux cleaned = -0.000390986 Jy ! Component: 150 - total flux cleaned = -0.000478654 Jy ! Component: 200 - total flux cleaned = -0.000557077 Jy ! Total flux subtracted in 200 components = -0.000557077 Jy ! Clean residual min=-0.001570 max=0.001649 Jy/beam ! Clean residual mean=0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.110326 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 117 components and 0.110326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085635Jy sigma=0.000713 ! Fit after self-cal, rms=0.085651Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.37207e-06 Jy ! Component: 100 - total flux cleaned = 5.24637e-05 Jy ! Component: 150 - total flux cleaned = 6.93522e-05 Jy ! Component: 200 - total flux cleaned = 6.91138e-05 Jy ! Total flux subtracted in 200 components = 6.91138e-05 Jy ! Clean residual min=-0.001551 max=0.001629 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.110395 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 0.110395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085644Jy sigma=0.000713 ! Fit after self-cal, rms=0.085645Jy sigma=0.000713 ! Inverting map ! Added new window around map position (-13.5, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111742 Jy ! Component: 100 - total flux cleaned = 0.00163322 Jy ! Component: 150 - total flux cleaned = 0.00177226 Jy ! Component: 200 - total flux cleaned = 0.00183291 Jy ! Total flux subtracted in 200 components = 0.00183291 Jy ! Clean residual min=-0.001393 max=0.001388 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.112228 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 153 components and 0.112228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085601Jy sigma=0.000713 ! Fit after self-cal, rms=0.085597Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085597Jy sigma=0.000713 ! Fit after self-cal, rms=0.085806Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.098 mas, bmaj=13.76 mas, bpa=-12.58 degrees ! Estimated noise=687.756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493534 Jy ! Component: 100 - total flux cleaned = 0.000796839 Jy ! Component: 150 - total flux cleaned = 0.00106953 Jy ! Component: 200 - total flux cleaned = 0.00131022 Jy ! Total flux subtracted in 200 components = 0.00131022 Jy ! Clean residual min=-0.001248 max=0.001224 Jy/beam ! Clean residual mean=0.000003 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.113538 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 176 components and 0.113538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085796Jy sigma=0.000712 ! Fit after self-cal, rms=0.085806Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179545 Jy ! Component: 100 - total flux cleaned = 0.000299169 Jy ! Component: 150 - total flux cleaned = 0.000458383 Jy ! Component: 200 - total flux cleaned = 0.000577125 Jy ! Total flux subtracted in 200 components = 0.000577125 Jy ! Clean residual min=-0.001234 max=0.001282 Jy/beam ! Clean residual mean=0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.114115 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 193 components and 0.114115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085803Jy sigma=0.000712 ! Fit after self-cal, rms=0.085801Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=13.16 mas, bpa=-18.38 degrees ! Estimated noise=593.097 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 13.16 at -18.38 degrees (North through East) ! Clean map min=-0.0013238 max=0.095441 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=12.71 mas, bpa=-18.79 degrees ! Estimated noise=1178.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0751331 Jy ! Component: 100 - total flux cleaned = 0.0915733 Jy ! Component: 150 - total flux cleaned = 0.0963388 Jy ! Component: 200 - total flux cleaned = 0.0984343 Jy ! Total flux subtracted in 200 components = 0.0984343 Jy ! Clean residual min=-0.003275 max=0.003147 Jy/beam ! Clean residual mean=-0.000002 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0984342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0984342 Jy ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=13.16 mas, bpa=-18.38 degrees ! Estimated noise=593.097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362803 Jy ! Component: 100 - total flux cleaned = 0.0058854 Jy ! Component: 150 - total flux cleaned = 0.00753413 Jy ! Component: 200 - total flux cleaned = 0.00884366 Jy ! Total flux subtracted in 200 components = 0.00884366 Jy ! Clean residual min=-0.001569 max=0.001729 Jy/beam ! Clean residual mean=-0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.107278 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.107278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.098 mas, bmaj=13.76 mas, bpa=-12.58 degrees ! Estimated noise=687.756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131978 Jy ! Component: 100 - total flux cleaned = 0.00190049 Jy ! Component: 150 - total flux cleaned = 0.00248995 Jy ! Component: 200 - total flux cleaned = 0.00304543 Jy ! Total flux subtracted in 200 components = 0.00304543 Jy ! Clean residual min=-0.001406 max=0.001360 Jy/beam ! Clean residual mean=0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.110323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523248 Jy ! Component: 100 - total flux cleaned = 0.00102729 Jy ! Component: 150 - total flux cleaned = 0.00151671 Jy ! Component: 200 - total flux cleaned = 0.00191691 Jy ! Total flux subtracted in 200 components = 0.00191691 Jy ! Clean residual min=-0.001315 max=0.001360 Jy/beam ! Clean residual mean=0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.11224 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 111 components and 0.11224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=13.16 mas, bpa=-18.38 degrees ! Estimated noise=593.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225393 Jy ! Component: 100 - total flux cleaned = -0.00016007 Jy ! Component: 150 - total flux cleaned = -9.73654e-05 Jy ! Component: 200 - total flux cleaned = -3.81813e-05 Jy ! Total flux subtracted in 200 components = -3.81813e-05 Jy ! Clean residual min=-0.001435 max=0.001339 Jy/beam ! Clean residual mean=0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.112202 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 138 components and 0.112202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085844Jy sigma=0.000713 ! Fit after self-cal, rms=0.085815Jy sigma=0.000713 wmodel J0105+0600_S_2017_10_21_pus_map.mod ! Writing 138 model components to file: J0105+0600_S_2017_10_21_pus_map.mod wobs J0105+0600_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0105+0600_S_2017_10_21_pus_uvs.fits wwins J0105+0600_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J0105+0600_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291437 Jy ! Component: 100 - total flux cleaned = -0.000290851 Jy ! Component: 150 - total flux cleaned = -0.000291204 Jy ! Component: 200 - total flux cleaned = -0.000270322 Jy ! Component: 250 - total flux cleaned = -0.000230527 Jy ! Component: 300 - total flux cleaned = -0.000153582 Jy ! Component: 350 - total flux cleaned = -6.04074e-05 Jy ! Component: 400 - total flux cleaned = 1.15006e-05 Jy ! Component: 450 - total flux cleaned = 8.09002e-05 Jy ! Component: 500 - total flux cleaned = 0.000131358 Jy ! Component: 550 - total flux cleaned = 0.000180822 Jy ! Component: 600 - total flux cleaned = 0.000197082 Jy ! Component: 650 - total flux cleaned = 0.000166046 Jy ! Component: 700 - total flux cleaned = 0.000119705 Jy ! Component: 750 - total flux cleaned = 1.44546e-05 Jy ! Component: 800 - total flux cleaned = 1.47789e-05 Jy ! Component: 850 - total flux cleaned = -4.30295e-05 Jy ! Component: 900 - total flux cleaned = -7.12912e-05 Jy ! Component: 950 - total flux cleaned = -0.000155213 Jy ! Component: 1000 - total flux cleaned = -0.000196398 Jy ! Component: 1050 - total flux cleaned = -0.000182787 Jy ! Component: 1100 - total flux cleaned = -0.000235931 Jy ! Component: 1150 - total flux cleaned = -0.000249315 Jy ! Component: 1200 - total flux cleaned = -0.000288311 Jy ! Component: 1250 - total flux cleaned = -0.000339339 Jy ! Component: 1300 - total flux cleaned = -0.00033917 Jy ! Component: 1350 - total flux cleaned = -0.00036401 Jy ! Component: 1400 - total flux cleaned = -0.000364114 Jy ! Component: 1450 - total flux cleaned = -0.000424404 Jy ! Component: 1500 - total flux cleaned = -0.000460005 Jy ! Component: 1550 - total flux cleaned = -0.000448263 Jy ! Component: 1600 - total flux cleaned = -0.000494702 Jy ! Component: 1650 - total flux cleaned = -0.00052913 Jy ! Component: 1700 - total flux cleaned = -0.000574608 Jy ! Component: 1750 - total flux cleaned = -0.000541091 Jy ! Component: 1800 - total flux cleaned = -0.000552324 Jy ! Component: 1850 - total flux cleaned = -0.000596167 Jy ! Component: 1900 - total flux cleaned = -0.000617768 Jy ! Component: 1950 - total flux cleaned = -0.000617577 Jy ! Component: 2000 - total flux cleaned = -0.000638839 Jy ! Component: 2050 - total flux cleaned = -0.000659977 Jy ! Component: 2100 - total flux cleaned = -0.000691266 Jy ! Component: 2150 - total flux cleaned = -0.000701716 Jy ! Component: 2200 - total flux cleaned = -0.00076297 Jy ! Component: 2250 - total flux cleaned = -0.000803299 Jy ! Component: 2300 - total flux cleaned = -0.000853298 Jy ! Component: 2350 - total flux cleaned = -0.000853224 Jy ! Component: 2400 - total flux cleaned = -0.000872893 Jy ! Component: 2450 - total flux cleaned = -0.000911855 Jy ! Component: 2500 - total flux cleaned = -0.000931119 Jy ! Component: 2550 - total flux cleaned = -0.000988545 Jy ! Component: 2600 - total flux cleaned = -0.00102633 Jy ! Component: 2650 - total flux cleaned = -0.00103578 Jy ! Component: 2700 - total flux cleaned = -0.00107297 Jy ! Component: 2750 - total flux cleaned = -0.001073 Jy ! Component: 2800 - total flux cleaned = -0.00108225 Jy ! Component: 2850 - total flux cleaned = -0.00111862 Jy ! Component: 2900 - total flux cleaned = -0.00114574 Jy ! Component: 2950 - total flux cleaned = -0.00110116 Jy ! Component: 3000 - total flux cleaned = -0.00115447 Jy ! Component: 3050 - total flux cleaned = -0.00116326 Jy ! Component: 3100 - total flux cleaned = -0.00122456 Jy ! Component: 3150 - total flux cleaned = -0.00125045 Jy ! Component: 3200 - total flux cleaned = -0.00125052 Jy ! Component: 3250 - total flux cleaned = -0.00129342 Jy ! Component: 3300 - total flux cleaned = -0.00131904 Jy ! Component: 3350 - total flux cleaned = -0.0013781 Jy ! Component: 3400 - total flux cleaned = -0.00138643 Jy ! Component: 3450 - total flux cleaned = -0.00141151 Jy ! Component: 3500 - total flux cleaned = -0.00144469 Jy ! Component: 3550 - total flux cleaned = -0.00146108 Jy ! Component: 3600 - total flux cleaned = -0.00146109 Jy ! Component: 3650 - total flux cleaned = -0.00146117 Jy ! Component: 3700 - total flux cleaned = -0.00149342 Jy ! Component: 3750 - total flux cleaned = -0.00146135 Jy ! Component: 3800 - total flux cleaned = -0.00147732 Jy ! Component: 3850 - total flux cleaned = -0.00147735 Jy ! Component: 3900 - total flux cleaned = -0.0015089 Jy ! Component: 3950 - total flux cleaned = -0.00147754 Jy ! Component: 4000 - total flux cleaned = -0.00152431 Jy ! Component: 4050 - total flux cleaned = -0.0015089 Jy ! Total flux subtracted in 4096 components = -0.0015397 Jy ! Clean residual min=-0.000450 max=0.000407 Jy/beam ! Clean residual mean=0.000000 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.110662 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 415 components and 0.110662 Jy ![Exited script file: muppet] wmap "J0105+0600_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 13.16 at -18.38 degrees (North through East) ! Clean map min=-0.0011761 max=0.096937 Jy/beam ! Writing clean map to FITS file: J0105+0600_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0969374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.451158 0.451158 0.902317 1.80463 3.60927 7.21853 14.4371 28.8741 57.7483 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 13.16 at -18.38 degrees (North through East) ! Clean map min=-0.0011761 max=0.096937 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0105+0600_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:56 2019