! Started logfile: J0104+1134_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:45 2019 obs J0104+1134_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0104+1134_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.935502 visibilities/baseline/integration-bin. ! Found source: J0104+1134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 19668 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0104+1134_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 630 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003687Jy sigma=0.009809 ! Fit after self-cal, rms=0.960226Jy sigma=0.009413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=11.6 mas, bpa=-19.56 degrees ! Estimated noise=977.728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332626 Jy ! Component: 100 - total flux cleaned = 0.0404067 Jy ! Total flux subtracted in 100 components = 0.0404067 Jy ! Clean residual min=-0.003919 max=0.004143 Jy/beam ! Clean residual mean=-0.000006 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.0404067 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0404067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079395Jy sigma=0.000694 ! Fit after self-cal, rms=0.077843Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=13.69 mas, bpa=-18.92 degrees ! Estimated noise=623.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359873 Jy ! Component: 100 - total flux cleaned = 0.00486938 Jy ! Component: 150 - total flux cleaned = 0.00526101 Jy ! Component: 200 - total flux cleaned = 0.00547499 Jy ! Total flux subtracted in 200 components = 0.00547499 Jy ! Clean residual min=-0.002832 max=0.002826 Jy/beam ! Clean residual mean=-0.000013 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0458817 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.0458817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077625Jy sigma=0.000677 ! Fit after self-cal, rms=0.077605Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.09 KP 1.26 ! LA 1.14 MK 1.07 NL 0.94 OV 1.13 ! PT 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.04 KP 1.22 ! LA 1.03 MK 1.06 NL 1.03 OV 1.11 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 HN 0.97 KP 1.11 ! LA 0.90 MK 1.09 NL 1.08 OV 1.08 ! PT 0.80 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 0.97 KP 1.00* ! LA 0.68 MK 0.80 NL 1.00* OV 1.00* ! PT 0.74 ! ! ! Fit before self-cal, rms=0.077605Jy sigma=0.000677 ! Fit after self-cal, rms=0.075745Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=13.75 mas, bpa=-18.8 degrees ! Estimated noise=622.721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320278 Jy ! Component: 100 - total flux cleaned = -0.000412294 Jy ! Component: 150 - total flux cleaned = -0.000449535 Jy ! Component: 200 - total flux cleaned = -0.000494719 Jy ! Total flux subtracted in 200 components = -0.000494719 Jy ! Clean residual min=-0.001934 max=0.001645 Jy/beam ! Clean residual mean=0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.045387 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.045387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075731Jy sigma=0.000670 ! Fit after self-cal, rms=0.075990Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075990Jy sigma=0.000668 ! Fit after self-cal, rms=0.076255Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=13.77 mas, bpa=-18.65 degrees ! Estimated noise=622.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000432196 Jy ! Component: 100 - total flux cleaned = -0.000462297 Jy ! Component: 150 - total flux cleaned = -0.000434874 Jy ! Component: 200 - total flux cleaned = -0.000422561 Jy ! Total flux subtracted in 200 components = -0.000422561 Jy ! Clean residual min=-0.001716 max=0.001420 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0449644 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0449644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076247Jy sigma=0.000666 ! Fit after self-cal, rms=0.076538Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22318e-05 Jy ! Component: 100 - total flux cleaned = 0.000146152 Jy ! Component: 150 - total flux cleaned = 0.000200497 Jy ! Component: 200 - total flux cleaned = 0.000225943 Jy ! Total flux subtracted in 200 components = 0.000225943 Jy ! Clean residual min=-0.001771 max=0.001607 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0451904 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0451904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076532Jy sigma=0.000666 ! Fit after self-cal, rms=0.076529Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076529Jy sigma=0.000666 ! Fit after self-cal, rms=0.078285Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.663 mas, bmaj=13.8 mas, bpa=-18.58 degrees ! Estimated noise=626.838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111204 Jy ! Component: 100 - total flux cleaned = -5.4805e-05 Jy ! Component: 150 - total flux cleaned = -1.75941e-05 Jy ! Component: 200 - total flux cleaned = 5.09451e-06 Jy ! Total flux subtracted in 200 components = 5.09451e-06 Jy ! Clean residual min=-0.001744 max=0.001466 Jy/beam ! Clean residual mean=0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0451955 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.0451955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078279Jy sigma=0.000665 ! Fit after self-cal, rms=0.078503Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.88244e-05 Jy ! Component: 100 - total flux cleaned = 0.00011082 Jy ! Component: 150 - total flux cleaned = 0.000133083 Jy ! Component: 200 - total flux cleaned = 0.000153715 Jy ! Total flux subtracted in 200 components = 0.000153715 Jy ! Clean residual min=-0.001686 max=0.001550 Jy/beam ! Clean residual mean=0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0453492 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.0453492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078500Jy sigma=0.000665 ! Fit after self-cal, rms=0.078513Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078513Jy sigma=0.000665 ! Fit after self-cal, rms=0.079784Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.2 mas, bmaj=14.56 mas, bpa=-15.54 degrees ! Estimated noise=740.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016151 Jy ! Component: 100 - total flux cleaned = 0.000205704 Jy ! Component: 150 - total flux cleaned = 0.000220728 Jy ! Component: 200 - total flux cleaned = 0.000235192 Jy ! Total flux subtracted in 200 components = 0.000235192 Jy ! Clean residual min=-0.001647 max=0.001638 Jy/beam ! Clean residual mean=0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0455844 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.0455844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079782Jy sigma=0.000665 ! Fit after self-cal, rms=0.079921Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127637 Jy ! Component: 100 - total flux cleaned = 0.000145116 Jy ! Component: 150 - total flux cleaned = 0.00016137 Jy ! Component: 200 - total flux cleaned = 0.000176627 Jy ! Total flux subtracted in 200 components = 0.000176627 Jy ! Clean residual min=-0.001653 max=0.001647 Jy/beam ! Clean residual mean=0.000004 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.045761 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 80 components and 0.045761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079919Jy sigma=0.000665 ! Fit after self-cal, rms=0.079935Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=13.82 mas, bpa=-18.52 degrees ! Estimated noise=629.891 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.674 x 13.82 at -18.52 degrees (North through East) ! Clean map min=-0.0028343 max=0.044297 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=11.46 mas, bpa=-19.33 degrees ! Estimated noise=985.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350665 Jy ! Component: 100 - total flux cleaned = 0.0409476 Jy ! Component: 150 - total flux cleaned = 0.0415344 Jy ! Component: 200 - total flux cleaned = 0.0418737 Jy ! Total flux subtracted in 200 components = 0.0418737 Jy ! Clean residual min=-0.003144 max=0.003149 Jy/beam ! Clean residual mean=-0.000003 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.0418737 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0418737 Jy ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=13.82 mas, bpa=-18.52 degrees ! Estimated noise=629.891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162514 Jy ! Component: 100 - total flux cleaned = 0.00256865 Jy ! Component: 150 - total flux cleaned = 0.00280118 Jy ! Component: 200 - total flux cleaned = 0.00298527 Jy ! Total flux subtracted in 200 components = 0.00298527 Jy ! Clean residual min=-0.001678 max=0.001540 Jy/beam ! Clean residual mean=0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0448589 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.044859 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.2 mas, bmaj=14.56 mas, bpa=-15.54 degrees ! Estimated noise=740.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489494 Jy ! Component: 100 - total flux cleaned = 0.000655215 Jy ! Component: 150 - total flux cleaned = 0.000701164 Jy ! Component: 200 - total flux cleaned = 0.000742012 Jy ! Total flux subtracted in 200 components = 0.000742012 Jy ! Clean residual min=-0.001658 max=0.001695 Jy/beam ! Clean residual mean=0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.045601 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.90868e-05 Jy ! Component: 100 - total flux cleaned = 4.97414e-05 Jy ! Component: 150 - total flux cleaned = 6.28306e-05 Jy ! Component: 200 - total flux cleaned = 7.54115e-05 Jy ! Total flux subtracted in 200 components = 7.54115e-05 Jy ! Clean residual min=-0.001652 max=0.001692 Jy/beam ! Clean residual mean=0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0456764 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.0456764 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=13.82 mas, bpa=-18.52 degrees ! Estimated noise=629.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158321 Jy ! Component: 100 - total flux cleaned = -0.000170738 Jy ! Component: 150 - total flux cleaned = -0.00019373 Jy ! Component: 200 - total flux cleaned = -0.000215713 Jy ! Total flux subtracted in 200 components = -0.000215713 Jy ! Clean residual min=-0.001622 max=0.001570 Jy/beam ! Clean residual mean=0.000002 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0454607 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0454607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079936Jy sigma=0.000665 ! Fit after self-cal, rms=0.079947Jy sigma=0.000665 wmodel J0104+1134_S_2017_10_21_pus_map.mod ! Writing 49 model components to file: J0104+1134_S_2017_10_21_pus_map.mod wobs J0104+1134_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0104+1134_S_2017_10_21_pus_uvs.fits wwins J0104+1134_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0104+1134_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268957 Jy ! Component: 100 - total flux cleaned = -8.3864e-05 Jy ! Component: 150 - total flux cleaned = 0.000190475 Jy ! Component: 200 - total flux cleaned = 0.000595024 Jy ! Component: 250 - total flux cleaned = 0.000823899 Jy ! Component: 300 - total flux cleaned = 0.00102371 Jy ! Component: 350 - total flux cleaned = 0.0011741 Jy ! Component: 400 - total flux cleaned = 0.00119483 Jy ! Component: 450 - total flux cleaned = 0.00121546 Jy ! Component: 500 - total flux cleaned = 0.00125577 Jy ! Component: 550 - total flux cleaned = 0.00131381 Jy ! Component: 600 - total flux cleaned = 0.00133248 Jy ! Component: 650 - total flux cleaned = 0.00138762 Jy ! Component: 700 - total flux cleaned = 0.00140523 Jy ! Component: 750 - total flux cleaned = 0.00144056 Jy ! Component: 800 - total flux cleaned = 0.00147526 Jy ! Component: 850 - total flux cleaned = 0.00154342 Jy ! Component: 900 - total flux cleaned = 0.00159361 Jy ! Component: 950 - total flux cleaned = 0.00162676 Jy ! Component: 1000 - total flux cleaned = 0.00167536 Jy ! Component: 1050 - total flux cleaned = 0.00170678 Jy ! Component: 1100 - total flux cleaned = 0.00172262 Jy ! Component: 1150 - total flux cleaned = 0.00181489 Jy ! Component: 1200 - total flux cleaned = 0.00186036 Jy ! Component: 1250 - total flux cleaned = 0.00191988 Jy ! Component: 1300 - total flux cleaned = 0.00193462 Jy ! Component: 1350 - total flux cleaned = 0.00200718 Jy ! Component: 1400 - total flux cleaned = 0.00206449 Jy ! Component: 1450 - total flux cleaned = 0.00207861 Jy ! Component: 1500 - total flux cleaned = 0.00216232 Jy ! Component: 1550 - total flux cleaned = 0.00218972 Jy ! Component: 1600 - total flux cleaned = 0.00223035 Jy ! Component: 1650 - total flux cleaned = 0.0022302 Jy ! Component: 1700 - total flux cleaned = 0.00225655 Jy ! Component: 1750 - total flux cleaned = 0.00229571 Jy ! Component: 1800 - total flux cleaned = 0.00230861 Jy ! Component: 1850 - total flux cleaned = 0.00229601 Jy ! Component: 1900 - total flux cleaned = 0.00228373 Jy ! Component: 1950 - total flux cleaned = 0.00233356 Jy ! Component: 2000 - total flux cleaned = 0.00232124 Jy ! Component: 2050 - total flux cleaned = 0.00232108 Jy ! Component: 2100 - total flux cleaned = 0.00230891 Jy ! Component: 2150 - total flux cleaned = 0.00226131 Jy ! Component: 2200 - total flux cleaned = 0.0022849 Jy ! Component: 2250 - total flux cleaned = 0.00230804 Jy ! Component: 2300 - total flux cleaned = 0.00227331 Jy ! Component: 2350 - total flux cleaned = 0.00223909 Jy ! Component: 2400 - total flux cleaned = 0.00223908 Jy ! Component: 2450 - total flux cleaned = 0.00219428 Jy ! Component: 2500 - total flux cleaned = 0.00216127 Jy ! Component: 2550 - total flux cleaned = 0.00213937 Jy ! Component: 2600 - total flux cleaned = 0.00212863 Jy ! Component: 2650 - total flux cleaned = 0.00208568 Jy ! Component: 2700 - total flux cleaned = 0.00206444 Jy ! Component: 2750 - total flux cleaned = 0.00204331 Jy ! Component: 2800 - total flux cleaned = 0.00200143 Jy ! Component: 2850 - total flux cleaned = 0.00194953 Jy ! Component: 2900 - total flux cleaned = 0.00192912 Jy ! Component: 2950 - total flux cleaned = 0.00192909 Jy ! Component: 3000 - total flux cleaned = 0.00191897 Jy ! Component: 3050 - total flux cleaned = 0.00183876 Jy ! Component: 3100 - total flux cleaned = 0.00183885 Jy ! Component: 3150 - total flux cleaned = 0.00184873 Jy ! Component: 3200 - total flux cleaned = 0.00185855 Jy ! Component: 3250 - total flux cleaned = 0.0018683 Jy ! Component: 3300 - total flux cleaned = 0.00185867 Jy ! Component: 3350 - total flux cleaned = 0.00186816 Jy ! Component: 3400 - total flux cleaned = 0.0018681 Jy ! Component: 3450 - total flux cleaned = 0.001887 Jy ! Component: 3500 - total flux cleaned = 0.00187764 Jy ! Component: 3550 - total flux cleaned = 0.00190574 Jy ! Component: 3600 - total flux cleaned = 0.00187791 Jy ! Component: 3650 - total flux cleaned = 0.0019147 Jy ! Component: 3700 - total flux cleaned = 0.00188713 Jy ! Component: 3750 - total flux cleaned = 0.0018872 Jy ! Component: 3800 - total flux cleaned = 0.00187811 Jy ! Component: 3850 - total flux cleaned = 0.00189606 Jy ! Component: 3900 - total flux cleaned = 0.00190493 Jy ! Component: 3950 - total flux cleaned = 0.00189617 Jy ! Component: 4000 - total flux cleaned = 0.00191384 Jy ! Component: 4050 - total flux cleaned = 0.00195774 Jy ! Total flux subtracted in 4096 components = 0.00195774 Jy ! Clean residual min=-0.000543 max=0.000500 Jy/beam ! Clean residual mean=0.000002 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0474184 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 311 components and 0.0474184 Jy ![Exited script file: muppet] wmap "J0104+1134_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.674 x 13.82 at -18.52 degrees (North through East) ! Clean map min=-0.0030355 max=0.04402 Jy/beam ! Writing clean map to FITS file: J0104+1134_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0440198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159616 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0878 1.0878 2.1756 4.3512 8.70239 17.4048 34.8096 69.6192 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.044 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.674 x 13.82 at -18.52 degrees (North through East) ! Clean map min=-0.0030355 max=0.04402 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0104+1134_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:50 2019