! Started logfile: J0103-1222_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:40 2019 obs J0103-1222_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0103-1222_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.890601 visibilities/baseline/integration-bin. ! Found source: J0103-1222 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0103-1222_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 720 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985680Jy sigma=0.008990 ! Fit after self-cal, rms=0.949165Jy sigma=0.008698 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=16.26 mas, bpa=-16.31 degrees ! Estimated noise=1120.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397264 Jy ! Component: 100 - total flux cleaned = 0.0491479 Jy ! Total flux subtracted in 100 components = 0.0491479 Jy ! Clean residual min=-0.003413 max=0.004889 Jy/beam ! Clean residual mean=0.000002 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.0491479 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0491479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085756Jy sigma=0.000703 ! Fit after self-cal, rms=0.085237Jy sigma=0.000698 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=18.21 mas, bpa=-16.34 degrees ! Estimated noise=703.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699442 Jy ! Component: 100 - total flux cleaned = 0.0103703 Jy ! Component: 150 - total flux cleaned = 0.0123172 Jy ! Component: 200 - total flux cleaned = 0.0136066 Jy ! Total flux subtracted in 200 components = 0.0136066 Jy ! Clean residual min=-0.002914 max=0.003404 Jy/beam ! Clean residual mean=0.000001 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0627545 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 55 components and 0.0627545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084616Jy sigma=0.000694 ! Fit after self-cal, rms=0.084482Jy sigma=0.000693 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.93 HN 0.94 KP 1.15 ! LA 1.10 MK 1.15 NL 0.96 OV 1.07 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.08 KP 1.09 ! LA 1.00 MK 1.06 NL 1.06 OV 1.17 ! PT 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.03 KP 1.16 ! LA 0.85 MK 1.00 NL 1.16 OV 1.00 ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.85 KP 1.00* ! LA 0.65 MK 0.87 NL 1.00* OV 1.00* ! PT 0.80 ! ! ! Fit before self-cal, rms=0.084482Jy sigma=0.000693 ! Fit after self-cal, rms=0.081214Jy sigma=0.000689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=18.11 mas, bpa=-16.18 degrees ! Estimated noise=705.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563745 Jy ! Component: 100 - total flux cleaned = 0.000531973 Jy ! Component: 150 - total flux cleaned = 0.000478256 Jy ! Component: 200 - total flux cleaned = 0.000455413 Jy ! Total flux subtracted in 200 components = 0.000455413 Jy ! Clean residual min=-0.001925 max=0.001867 Jy/beam ! Clean residual mean=0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0632099 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0632099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081189Jy sigma=0.000689 ! Fit after self-cal, rms=0.081338Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081338Jy sigma=0.000688 ! Fit after self-cal, rms=0.082068Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=18.09 mas, bpa=-16.18 degrees ! Estimated noise=706.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001668 Jy ! Component: 100 - total flux cleaned = 0.000189267 Jy ! Component: 150 - total flux cleaned = 0.00023575 Jy ! Component: 200 - total flux cleaned = 0.000278074 Jy ! Total flux subtracted in 200 components = 0.000278074 Jy ! Clean residual min=-0.001776 max=0.001951 Jy/beam ! Clean residual mean=-0.000000 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.063488 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.063488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082051Jy sigma=0.000687 ! Fit after self-cal, rms=0.082193Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.20201e-05 Jy ! Component: 100 - total flux cleaned = 9.41511e-05 Jy ! Component: 150 - total flux cleaned = 0.000132814 Jy ! Component: 200 - total flux cleaned = 0.000167869 Jy ! Total flux subtracted in 200 components = 0.000167869 Jy ! Clean residual min=-0.001759 max=0.001793 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0636559 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.0636559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082183Jy sigma=0.000687 ! Fit after self-cal, rms=0.082185Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082185Jy sigma=0.000687 ! Fit after self-cal, rms=0.082743Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=18.05 mas, bpa=-16.17 degrees ! Estimated noise=707.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140963 Jy ! Component: 100 - total flux cleaned = 0.000198268 Jy ! Component: 150 - total flux cleaned = 0.000215353 Jy ! Component: 200 - total flux cleaned = 0.000230796 Jy ! Total flux subtracted in 200 components = 0.000230796 Jy ! Clean residual min=-0.001711 max=0.001857 Jy/beam ! Clean residual mean=-0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0638867 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.0638867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082735Jy sigma=0.000687 ! Fit after self-cal, rms=0.082822Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.75084e-05 Jy ! Component: 100 - total flux cleaned = 7.49027e-05 Jy ! Component: 150 - total flux cleaned = 9.02155e-05 Jy ! Component: 200 - total flux cleaned = 0.00010384 Jy ! Total flux subtracted in 200 components = 0.00010384 Jy ! Clean residual min=-0.001746 max=0.001775 Jy/beam ! Clean residual mean=-0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0639905 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.0639905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082816Jy sigma=0.000686 ! Fit after self-cal, rms=0.082811Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082811Jy sigma=0.000686 ! Fit after self-cal, rms=0.083108Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.657 mas, bmaj=21.08 mas, bpa=-5.186 degrees ! Estimated noise=852.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109162 Jy ! Component: 100 - total flux cleaned = 8.81111e-05 Jy ! Component: 150 - total flux cleaned = 7.9121e-05 Jy ! Component: 200 - total flux cleaned = 7.15752e-05 Jy ! Total flux subtracted in 200 components = 7.15752e-05 Jy ! Clean residual min=-0.002042 max=0.001831 Jy/beam ! Clean residual mean=-0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0640621 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.0640621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083105Jy sigma=0.000686 ! Fit after self-cal, rms=0.083137Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.89729e-05 Jy ! Component: 100 - total flux cleaned = -4.75075e-05 Jy ! Component: 150 - total flux cleaned = -4.74672e-05 Jy ! Component: 200 - total flux cleaned = -5.46274e-05 Jy ! Total flux subtracted in 200 components = -5.46274e-05 Jy ! Clean residual min=-0.002056 max=0.001862 Jy/beam ! Clean residual mean=-0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0640075 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.0640075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083135Jy sigma=0.000686 ! Fit after self-cal, rms=0.083129Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=18.02 mas, bpa=-16.16 degrees ! Estimated noise=707.992 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 18.02 at -16.16 degrees (North through East) ! Clean map min=-0.0017136 max=0.051481 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=16.09 mas, bpa=-16.09 degrees ! Estimated noise=1109.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385794 Jy ! Component: 100 - total flux cleaned = 0.0498609 Jy ! Component: 150 - total flux cleaned = 0.0558201 Jy ! Component: 200 - total flux cleaned = 0.0594447 Jy ! Total flux subtracted in 200 components = 0.0594447 Jy ! Clean residual min=-0.003058 max=0.003360 Jy/beam ! Clean residual mean=0.000005 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.0594447 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0594447 Jy ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=18.02 mas, bpa=-16.16 degrees ! Estimated noise=707.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251551 Jy ! Component: 100 - total flux cleaned = 0.00309469 Jy ! Component: 150 - total flux cleaned = 0.00293994 Jy ! Component: 200 - total flux cleaned = 0.00284773 Jy ! Total flux subtracted in 200 components = 0.00284773 Jy ! Clean residual min=-0.001879 max=0.001666 Jy/beam ! Clean residual mean=-0.000000 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0622924 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 47 components and 0.0622924 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.657 mas, bmaj=21.08 mas, bpa=-5.186 degrees ! Estimated noise=852.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016723 Jy ! Component: 100 - total flux cleaned = 5.87449e-05 Jy ! Component: 150 - total flux cleaned = -7.9673e-07 Jy ! Component: 200 - total flux cleaned = -2.05908e-06 Jy ! Total flux subtracted in 200 components = -2.05908e-06 Jy ! Clean residual min=-0.001715 max=0.001759 Jy/beam ! Clean residual mean=-0.000000 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0622903 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.40495e-07 Jy ! Component: 100 - total flux cleaned = 1.88967e-05 Jy ! Component: 150 - total flux cleaned = 3.76418e-05 Jy ! Component: 200 - total flux cleaned = 7.05662e-05 Jy ! Total flux subtracted in 200 components = 7.05662e-05 Jy ! Clean residual min=-0.001632 max=0.001741 Jy/beam ! Clean residual mean=-0.000000 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0623609 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 83 components and 0.0623609 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=18.02 mas, bpa=-16.16 degrees ! Estimated noise=707.992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000458727 Jy ! Component: 100 - total flux cleaned = -0.000529138 Jy ! Component: 150 - total flux cleaned = -0.000529282 Jy ! Component: 200 - total flux cleaned = -0.000473744 Jy ! Total flux subtracted in 200 components = -0.000473744 Jy ! Clean residual min=-0.001712 max=0.001562 Jy/beam ! Clean residual mean=-0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0618872 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.0618871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083085Jy sigma=0.000686 ! Fit after self-cal, rms=0.083088Jy sigma=0.000686 wmodel J0103-1222_S_2017_10_21_pus_map.mod ! Writing 100 model components to file: J0103-1222_S_2017_10_21_pus_map.mod wobs J0103-1222_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0103-1222_S_2017_10_21_pus_uvs.fits wwins J0103-1222_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J0103-1222_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193813 Jy ! Component: 100 - total flux cleaned = -0.000386726 Jy ! Component: 150 - total flux cleaned = -0.000280933 Jy ! Component: 200 - total flux cleaned = -0.000206441 Jy ! Component: 250 - total flux cleaned = -0.000134434 Jy ! Component: 300 - total flux cleaned = -4.26342e-05 Jy ! Component: 350 - total flux cleaned = 4.53548e-05 Jy ! Component: 400 - total flux cleaned = 0.000151913 Jy ! Component: 450 - total flux cleaned = 0.000255472 Jy ! Component: 500 - total flux cleaned = 0.000396954 Jy ! Component: 550 - total flux cleaned = 0.000574231 Jy ! Component: 600 - total flux cleaned = 0.000709438 Jy ! Component: 650 - total flux cleaned = 0.000897897 Jy ! Component: 700 - total flux cleaned = 0.000916283 Jy ! Component: 750 - total flux cleaned = 0.00100685 Jy ! Component: 800 - total flux cleaned = 0.00113122 Jy ! Component: 850 - total flux cleaned = 0.00120109 Jy ! Component: 900 - total flux cleaned = 0.00126979 Jy ! Component: 950 - total flux cleaned = 0.00138747 Jy ! Component: 1000 - total flux cleaned = 0.00142049 Jy ! Component: 1050 - total flux cleaned = 0.00151856 Jy ! Component: 1100 - total flux cleaned = 0.00158261 Jy ! Component: 1150 - total flux cleaned = 0.00162993 Jy ! Component: 1200 - total flux cleaned = 0.00170746 Jy ! Component: 1250 - total flux cleaned = 0.00173813 Jy ! Component: 1300 - total flux cleaned = 0.00182914 Jy ! Component: 1350 - total flux cleaned = 0.00188906 Jy ! Component: 1400 - total flux cleaned = 0.00194829 Jy ! Component: 1450 - total flux cleaned = 0.00206431 Jy ! Component: 1500 - total flux cleaned = 0.00209281 Jy ! Component: 1550 - total flux cleaned = 0.0021916 Jy ! Component: 1600 - total flux cleaned = 0.00227493 Jy ! Component: 1650 - total flux cleaned = 0.00232981 Jy ! Component: 1700 - total flux cleaned = 0.00238413 Jy ! Component: 1750 - total flux cleaned = 0.00245092 Jy ! Component: 1800 - total flux cleaned = 0.00251706 Jy ! Component: 1850 - total flux cleaned = 0.00259538 Jy ! Component: 1900 - total flux cleaned = 0.00267254 Jy ! Component: 1950 - total flux cleaned = 0.00274883 Jy ! Component: 2000 - total flux cleaned = 0.00277388 Jy ! Component: 2050 - total flux cleaned = 0.00283621 Jy ! Component: 2100 - total flux cleaned = 0.00288537 Jy ! Component: 2150 - total flux cleaned = 0.00288526 Jy ! Component: 2200 - total flux cleaned = 0.00290963 Jy ! Component: 2250 - total flux cleaned = 0.00295743 Jy ! Component: 2300 - total flux cleaned = 0.00298114 Jy ! Component: 2350 - total flux cleaned = 0.00303976 Jy ! Component: 2400 - total flux cleaned = 0.00306286 Jy ! Component: 2450 - total flux cleaned = 0.00310872 Jy ! Component: 2500 - total flux cleaned = 0.00314275 Jy ! Component: 2550 - total flux cleaned = 0.00316528 Jy ! Component: 2600 - total flux cleaned = 0.00320995 Jy ! Component: 2650 - total flux cleaned = 0.00324305 Jy ! Component: 2700 - total flux cleaned = 0.00329803 Jy ! Component: 2750 - total flux cleaned = 0.00330895 Jy ! Component: 2800 - total flux cleaned = 0.00337387 Jy ! Component: 2850 - total flux cleaned = 0.0034276 Jy ! Component: 2900 - total flux cleaned = 0.00341695 Jy ! Component: 2950 - total flux cleaned = 0.00344876 Jy ! Component: 3000 - total flux cleaned = 0.00349085 Jy ! Component: 3050 - total flux cleaned = 0.00355356 Jy ! Component: 3100 - total flux cleaned = 0.00357433 Jy ! Component: 3150 - total flux cleaned = 0.0036052 Jy ! Component: 3200 - total flux cleaned = 0.0036359 Jy ! Component: 3250 - total flux cleaned = 0.00363595 Jy ! Component: 3300 - total flux cleaned = 0.00367626 Jy ! Component: 3350 - total flux cleaned = 0.00369639 Jy ! Component: 3400 - total flux cleaned = 0.00371631 Jy ! Component: 3450 - total flux cleaned = 0.00372623 Jy ! Component: 3500 - total flux cleaned = 0.00374593 Jy ! Component: 3550 - total flux cleaned = 0.00375572 Jy ! Component: 3600 - total flux cleaned = 0.00373622 Jy ! Component: 3650 - total flux cleaned = 0.00376524 Jy ! Component: 3700 - total flux cleaned = 0.00374588 Jy ! Component: 3750 - total flux cleaned = 0.00374588 Jy ! Component: 3800 - total flux cleaned = 0.00375538 Jy ! Component: 3850 - total flux cleaned = 0.00375536 Jy ! Component: 3900 - total flux cleaned = 0.00376479 Jy ! Component: 3950 - total flux cleaned = 0.00377415 Jy ! Component: 4000 - total flux cleaned = 0.00376479 Jy ! Component: 4050 - total flux cleaned = 0.00378339 Jy ! Total flux subtracted in 4096 components = 0.00378338 Jy ! Clean residual min=-0.000531 max=0.000616 Jy/beam ! Clean residual mean=0.000005 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0656705 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 406 components and 0.0656706 Jy ![Exited script file: muppet] wmap "J0103-1222_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 18.02 at -16.16 degrees (North through East) ! Clean map min=-0.0017262 max=0.050996 Jy/beam ! Writing clean map to FITS file: J0103-1222_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0509962 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07971 1.07971 2.15942 4.31883 8.63767 17.2753 34.5507 69.1013 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 18.02 at -16.16 degrees (North through East) ! Clean map min=-0.0017262 max=0.050996 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0103-1222_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:45 2019