! Started logfile: J0103-1222_S_2017_04_28_pus_uvs.log on Thu May 2 16:14:08 2019 obs J0103-1222_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0103-1222_S_2017_04_28_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.795139 visibilities/baseline/integration-bin. ! Found source: J0103-1222 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13740 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0103-1222_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 570 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996772Jy sigma=0.038543 ! Fit after self-cal, rms=0.951397Jy sigma=0.038459 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=7.108 mas, bpa=-11.26 degrees ! Estimated noise=1253.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300992 Jy ! Component: 100 - total flux cleaned = 0.0381341 Jy ! Total flux subtracted in 100 components = 0.0381341 Jy ! Clean residual min=-0.010390 max=0.011517 Jy/beam ! Clean residual mean=0.000009 rms=0.003231 Jy/beam ! Combined flux in latest and established models = 0.0381341 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0381341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102069Jy sigma=0.001522 ! Fit after self-cal, rms=0.101335Jy sigma=0.001479 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.097 mas, bmaj=9.654 mas, bpa=-8.182 degrees ! Estimated noise=594.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00645029 Jy ! Component: 100 - total flux cleaned = -0.00853883 Jy ! Component: 150 - total flux cleaned = -0.00911747 Jy ! Component: 200 - total flux cleaned = -0.00954628 Jy ! Total flux subtracted in 200 components = -0.00954628 Jy ! Clean residual min=-0.011411 max=0.013498 Jy/beam ! Clean residual mean=0.000004 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 0.0285878 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.0285878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101966Jy sigma=0.001248 ! Fit after self-cal, rms=0.101689Jy sigma=0.001247 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.78 HN 0.84 KP 0.75 ! LA 0.70 MK 0.87 NL 0.71 OV 0.78 ! PT 0.79 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.74 HN 0.94 KP 0.72 ! LA 0.63 MK 0.77 NL 0.80 OV 0.79 ! PT 0.74 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.76 HN 0.80 KP 0.71 ! LA 0.67 MK 0.75 NL 0.76 OV 0.72 ! PT 0.74 SC 1.03 ! ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.19 HN 1.10 KP 1.00* ! LA 11.74 MK 0.63 NL 1.00* OV 1.00* ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.101689Jy sigma=0.001247 ! Fit after self-cal, rms=0.064176Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=8.93 mas, bpa=-5.884 degrees ! Estimated noise=597.695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726317 Jy ! Component: 100 - total flux cleaned = 0.000747182 Jy ! Component: 150 - total flux cleaned = 0.000747426 Jy ! Component: 200 - total flux cleaned = 0.000764866 Jy ! Total flux subtracted in 200 components = 0.000764866 Jy ! Clean residual min=-0.001768 max=0.001748 Jy/beam ! Clean residual mean=-0.000002 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0293527 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0293527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064155Jy sigma=0.000641 ! Fit after self-cal, rms=0.064036Jy sigma=0.000639 ! Inverting map ! Added new window around map position (122.5, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143795 Jy ! Component: 100 - total flux cleaned = 0.00149634 Jy ! Component: 150 - total flux cleaned = 0.00159873 Jy ! Component: 200 - total flux cleaned = 0.00157161 Jy ! Total flux subtracted in 200 components = 0.00157161 Jy ! Clean residual min=-0.001651 max=0.001366 Jy/beam ! Clean residual mean=-0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0309243 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.0309243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063943Jy sigma=0.000639 ! Fit after self-cal, rms=0.063976Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063976Jy sigma=0.000638 ! Fit after self-cal, rms=0.062911Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=8.895 mas, bpa=-6.419 degrees ! Estimated noise=599.177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074178 Jy ! Component: 100 - total flux cleaned = 0.000852594 Jy ! Component: 150 - total flux cleaned = 0.000901316 Jy ! Component: 200 - total flux cleaned = 0.000880311 Jy ! Total flux subtracted in 200 components = 0.000880311 Jy ! Clean residual min=-0.001421 max=0.001322 Jy/beam ! Clean residual mean=-0.000001 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0318046 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.0318046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062878Jy sigma=0.000636 ! Fit after self-cal, rms=0.062846Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499651 Jy ! Component: 100 - total flux cleaned = 0.000499608 Jy ! Component: 150 - total flux cleaned = 0.000500538 Jy ! Component: 200 - total flux cleaned = 0.000522902 Jy ! Total flux subtracted in 200 components = 0.000522902 Jy ! Clean residual min=-0.001457 max=0.001341 Jy/beam ! Clean residual mean=-0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0323275 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.0323275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062817Jy sigma=0.000635 ! Fit after self-cal, rms=0.062822Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062822Jy sigma=0.000635 ! Fit after self-cal, rms=0.062579Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=8.85 mas, bpa=-6.344 degrees ! Estimated noise=601.215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572787 Jy ! Component: 100 - total flux cleaned = 0.000598107 Jy ! Component: 150 - total flux cleaned = 0.000641333 Jy ! Component: 200 - total flux cleaned = 0.00064184 Jy ! Total flux subtracted in 200 components = 0.00064184 Jy ! Clean residual min=-0.001430 max=0.001316 Jy/beam ! Clean residual mean=-0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0329693 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.0329693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062555Jy sigma=0.000635 ! Fit after self-cal, rms=0.062554Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188594 Jy ! Component: 100 - total flux cleaned = 0.000187379 Jy ! Component: 150 - total flux cleaned = 0.000208362 Jy ! Component: 200 - total flux cleaned = 0.000207586 Jy ! Total flux subtracted in 200 components = 0.000207586 Jy ! Clean residual min=-0.001430 max=0.001311 Jy/beam ! Clean residual mean=-0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0331769 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.0331769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062536Jy sigma=0.000635 ! Fit after self-cal, rms=0.062539Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062539Jy sigma=0.000635 ! Fit after self-cal, rms=0.062602Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=15.05 mas, bpa=0.3209 degrees ! Estimated noise=686.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223037 Jy ! Component: 100 - total flux cleaned = 0.00020753 Jy ! Component: 150 - total flux cleaned = 0.00020758 Jy ! Component: 200 - total flux cleaned = 0.000229382 Jy ! Total flux subtracted in 200 components = 0.000229382 Jy ! Clean residual min=-0.001327 max=0.001496 Jy/beam ! Clean residual mean=-0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0334063 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.0334063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062597Jy sigma=0.000634 ! Fit after self-cal, rms=0.062621Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.68327e-05 Jy ! Component: 100 - total flux cleaned = -4.11347e-05 Jy ! Component: 150 - total flux cleaned = -3.03327e-05 Jy ! Component: 200 - total flux cleaned = -1.09469e-05 Jy ! Total flux subtracted in 200 components = -1.09469e-05 Jy ! Clean residual min=-0.001309 max=0.001457 Jy/beam ! Clean residual mean=-0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0333953 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.0333953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062618Jy sigma=0.000634 ! Fit after self-cal, rms=0.062620Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=8.824 mas, bpa=-6.122 degrees ! Estimated noise=604.191 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 8.824 at -6.122 degrees (North through East) ! Clean map min=-0.0020942 max=0.036283 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.116 mas, bpa=-8.611 degrees ! Estimated noise=1061.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274669 Jy ! Component: 100 - total flux cleaned = 0.0335152 Jy ! Component: 150 - total flux cleaned = 0.034475 Jy ! Component: 200 - total flux cleaned = 0.0346087 Jy ! Total flux subtracted in 200 components = 0.0346087 Jy ! Clean residual min=-0.003322 max=0.003015 Jy/beam ! Clean residual mean=-0.000001 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0346087 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0346087 Jy ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=8.824 mas, bpa=-6.122 degrees ! Estimated noise=604.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.55034e-05 Jy ! Component: 100 - total flux cleaned = -1.74605e-05 Jy ! Component: 150 - total flux cleaned = -1.81533e-05 Jy ! Component: 200 - total flux cleaned = -6.73391e-05 Jy ! Total flux subtracted in 200 components = -6.73391e-05 Jy ! Clean residual min=-0.001619 max=0.001510 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0345413 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.0345413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=15.05 mas, bpa=0.3209 degrees ! Estimated noise=686.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118513 Jy ! Component: 100 - total flux cleaned = -0.000189097 Jy ! Component: 150 - total flux cleaned = -0.000268596 Jy ! Component: 200 - total flux cleaned = -0.00033574 Jy ! Total flux subtracted in 200 components = -0.00033574 Jy ! Clean residual min=-0.001332 max=0.001447 Jy/beam ! Clean residual mean=-0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0342056 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.9007e-05 Jy ! Component: 100 - total flux cleaned = -0.000110736 Jy ! Component: 150 - total flux cleaned = -0.000125871 Jy ! Component: 200 - total flux cleaned = -0.000140791 Jy ! Total flux subtracted in 200 components = -0.000140791 Jy ! Clean residual min=-0.001258 max=0.001447 Jy/beam ! Clean residual mean=-0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0340648 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 55 components and 0.0340648 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=8.824 mas, bpa=-6.122 degrees ! Estimated noise=604.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229775 Jy ! Component: 100 - total flux cleaned = 0.000190049 Jy ! Component: 150 - total flux cleaned = 7.76417e-05 Jy ! Component: 200 - total flux cleaned = -2.44188e-05 Jy ! Total flux subtracted in 200 components = -2.44188e-05 Jy ! Clean residual min=-0.001413 max=0.001438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0340404 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.0340404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062686Jy sigma=0.000635 ! Fit after self-cal, rms=0.062721Jy sigma=0.000635 wmodel J0103-1222_S_2017_04_28_pus_map.mod ! Writing 65 model components to file: J0103-1222_S_2017_04_28_pus_map.mod wobs J0103-1222_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0103-1222_S_2017_04_28_pus_uvs.fits wwins J0103-1222_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0103-1222_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383995 Jy ! Component: 100 - total flux cleaned = -0.00052644 Jy ! Component: 150 - total flux cleaned = -0.000617188 Jy ! Component: 200 - total flux cleaned = -0.000573436 Jy ! Component: 250 - total flux cleaned = -0.000595387 Jy ! Component: 300 - total flux cleaned = -0.000533394 Jy ! Component: 350 - total flux cleaned = -0.000452865 Jy ! Component: 400 - total flux cleaned = -0.000452717 Jy ! Component: 450 - total flux cleaned = -0.000376005 Jy ! Component: 500 - total flux cleaned = -0.000376359 Jy ! Component: 550 - total flux cleaned = -0.000340123 Jy ! Component: 600 - total flux cleaned = -0.00030426 Jy ! Component: 650 - total flux cleaned = -0.000251594 Jy ! Component: 700 - total flux cleaned = -0.000234315 Jy ! Component: 750 - total flux cleaned = -0.000267862 Jy ! Component: 800 - total flux cleaned = -0.0002676 Jy ! Component: 850 - total flux cleaned = -0.0002678 Jy ! Component: 900 - total flux cleaned = -0.000267694 Jy ! Component: 950 - total flux cleaned = -0.000267527 Jy ! Component: 1000 - total flux cleaned = -0.000267362 Jy ! Component: 1050 - total flux cleaned = -0.000282935 Jy ! Component: 1100 - total flux cleaned = -0.000252539 Jy ! Component: 1150 - total flux cleaned = -0.000207585 Jy ! Component: 1200 - total flux cleaned = -0.000222729 Jy ! Component: 1250 - total flux cleaned = -0.000222771 Jy ! Component: 1300 - total flux cleaned = -0.000179352 Jy ! Component: 1350 - total flux cleaned = -0.000165073 Jy ! Component: 1400 - total flux cleaned = -0.000165218 Jy ! Component: 1450 - total flux cleaned = -0.000249456 Jy ! Component: 1500 - total flux cleaned = -0.000221573 Jy ! Component: 1550 - total flux cleaned = -0.000207869 Jy ! Component: 1600 - total flux cleaned = -0.000235137 Jy ! Component: 1650 - total flux cleaned = -0.000248387 Jy ! Component: 1700 - total flux cleaned = -0.00026194 Jy ! Component: 1750 - total flux cleaned = -0.000288491 Jy ! Component: 1800 - total flux cleaned = -0.000328051 Jy ! Component: 1850 - total flux cleaned = -0.000419187 Jy ! Component: 1900 - total flux cleaned = -0.000432069 Jy ! Component: 1950 - total flux cleaned = -0.000483132 Jy ! Component: 2000 - total flux cleaned = -0.000521306 Jy ! Component: 2050 - total flux cleaned = -0.000534034 Jy ! Component: 2100 - total flux cleaned = -0.000609007 Jy ! Component: 2150 - total flux cleaned = -0.000621448 Jy ! Component: 2200 - total flux cleaned = -0.000707558 Jy ! Component: 2250 - total flux cleaned = -0.000732072 Jy ! Component: 2300 - total flux cleaned = -0.000756387 Jy ! Component: 2350 - total flux cleaned = -0.000816481 Jy ! Component: 2400 - total flux cleaned = -0.000804549 Jy ! Component: 2450 - total flux cleaned = -0.000887734 Jy ! Component: 2500 - total flux cleaned = -0.000958301 Jy ! Component: 2550 - total flux cleaned = -0.000981711 Jy ! Component: 2600 - total flux cleaned = -0.00100495 Jy ! Component: 2650 - total flux cleaned = -0.00107409 Jy ! Component: 2700 - total flux cleaned = -0.00111987 Jy ! Component: 2750 - total flux cleaned = -0.00115388 Jy ! Component: 2800 - total flux cleaned = -0.00125543 Jy ! Component: 2850 - total flux cleaned = -0.00132262 Jy ! Component: 2900 - total flux cleaned = -0.00132255 Jy ! Component: 2950 - total flux cleaned = -0.00136687 Jy ! Component: 3000 - total flux cleaned = -0.00139987 Jy ! Component: 3050 - total flux cleaned = -0.00144343 Jy ! Component: 3100 - total flux cleaned = -0.00148683 Jy ! Component: 3150 - total flux cleaned = -0.00154068 Jy ! Component: 3200 - total flux cleaned = -0.00155144 Jy ! Component: 3250 - total flux cleaned = -0.00160457 Jy ! Component: 3300 - total flux cleaned = -0.00163617 Jy ! Component: 3350 - total flux cleaned = -0.0016361 Jy ! Component: 3400 - total flux cleaned = -0.00170932 Jy ! Component: 3450 - total flux cleaned = -0.00175081 Jy ! Component: 3500 - total flux cleaned = -0.00179202 Jy ! Component: 3550 - total flux cleaned = -0.00181254 Jy ! Component: 3600 - total flux cleaned = -0.00184305 Jy ! Component: 3650 - total flux cleaned = -0.0018531 Jy ! Component: 3700 - total flux cleaned = -0.00189338 Jy ! Component: 3750 - total flux cleaned = -0.00192341 Jy ! Component: 3800 - total flux cleaned = -0.00193341 Jy ! Component: 3850 - total flux cleaned = -0.00198295 Jy ! Component: 3900 - total flux cleaned = -0.00199268 Jy ! Component: 3950 - total flux cleaned = -0.00199277 Jy ! Component: 4000 - total flux cleaned = -0.0020218 Jy ! Component: 4050 - total flux cleaned = -0.00203144 Jy ! Total flux subtracted in 4096 components = -0.00202183 Jy ! Clean residual min=-0.000600 max=0.000519 Jy/beam ! Clean residual mean=0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0320186 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 299 components and 0.0320186 Jy ![Exited script file: muppet] wmap "J0103-1222_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 8.824 at -6.122 degrees (North through East) ! Clean map min=-0.0019737 max=0.035679 Jy/beam ! Writing clean map to FITS file: J0103-1222_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0356791 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170242 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.43144 1.43144 2.86289 5.72577 11.4515 22.9031 45.8062 91.6124 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.744 x 8.824 at -6.122 degrees (North through East) ! Clean map min=-0.0019737 max=0.035679 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0103-1222_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:14:13 2019