! Started logfile: J0102+5824_X_2017_04_28_pus_uvs.log on Mon Apr 29 14:22:52 2019 obs J0102+5824_X_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0102+5824_X_2017_04_28_pus_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.635948 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 907 lines of history. ! ! Reading 11676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0102+5824_X_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.770029Jy sigma=0.006185 ! Fit after self-cal, rms=0.765594Jy sigma=0.006158 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.06% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8157 mas, bmaj=0.9829 mas, bpa=-2.416 degrees ! Estimated noise=1473.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32193 Jy ! Component: 100 - total flux cleaned = 1.63023 Jy ! Total flux subtracted in 100 components = 1.63023 Jy ! Clean residual min=-0.049880 max=0.114688 Jy/beam ! Clean residual mean=0.000179 rms=0.015510 Jy/beam ! Combined flux in latest and established models = 1.63022 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.63022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.399159Jy sigma=0.002381 ! Fit after self-cal, rms=0.399138Jy sigma=0.002380 ! Inverting map ! Your choice of large map pixels excluded 0.06% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121643 Jy ! Component: 100 - total flux cleaned = 0.189081 Jy ! Total flux subtracted in 100 components = 0.189081 Jy ! Clean residual min=-0.040105 max=0.047762 Jy/beam ! Clean residual mean=0.000249 rms=0.010917 Jy/beam ! Combined flux in latest and established models = 1.81931 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.81931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.395435Jy sigma=0.001763 ! Fit after self-cal, rms=0.395296Jy sigma=0.001759 ! Inverting map ! Your choice of large map pixels excluded 0.06% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.06% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9823 mas, bmaj=1.212 mas, bpa=7.341 degrees ! Estimated noise=967.294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455186 Jy ! Component: 100 - total flux cleaned = 0.0660767 Jy ! Component: 150 - total flux cleaned = 0.0667374 Jy ! Component: 200 - total flux cleaned = 0.0667768 Jy ! Total flux subtracted in 200 components = 0.0667768 Jy ! Clean residual min=-0.039003 max=0.050290 Jy/beam ! Clean residual mean=0.000656 rms=0.012276 Jy/beam ! Combined flux in latest and established models = 1.88608 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 1.88608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.402798Jy sigma=0.001616 ! Fit after self-cal, rms=0.402650Jy sigma=0.001613 ! Inverting map ! Your choice of large map pixels excluded 0.06% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.96 KP 0.98 ! LA 1.66 MK 0.97 NL 0.99 OV 1.00 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.98 KP 0.99 ! LA 1.61 MK 0.97 NL 0.99 OV 0.95 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.99 KP 0.93 ! LA 1.67 MK 0.99 NL 0.99 OV 1.00 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.95 KP 0.96 ! LA 1.66 MK 0.99 NL 0.97 OV 0.99 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.97 KP 0.96 ! LA 1.66 MK 1.01 NL 1.00 OV 0.96 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.95 KP 0.96 ! LA 1.77 MK 0.99 NL 1.01 OV 0.96 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.00 KP 0.95 ! LA 1.73 MK 0.99 NL 0.99 OV 0.96 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.00 KP 0.96 ! LA 1.59 MK 0.98 NL 0.99 OV 0.96 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.00 KP 0.95 ! LA 1.76 MK 0.97 NL 0.99 OV 0.96 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.98 KP 0.96 ! LA 1.82 MK 1.00 NL 1.01 OV 0.95 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.96 KP 0.97 ! LA 1.79 MK 0.98 NL 1.01 OV 0.96 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.98 KP 0.95 ! LA 1.73 MK 0.97 NL 1.01 OV 0.96 ! PT 1.01 SC 1.04 ! ! ! Fit before self-cal, rms=0.402650Jy sigma=0.001613 ! Fit after self-cal, rms=0.265265Jy sigma=0.000988 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9885 mas, bmaj=1.209 mas, bpa=5.905 degrees ! Estimated noise=967.024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262667 Jy ! Component: 100 - total flux cleaned = 0.0276177 Jy ! Component: 150 - total flux cleaned = 0.0298368 Jy ! Component: 200 - total flux cleaned = 0.0303205 Jy ! Total flux subtracted in 200 components = 0.0303205 Jy ! Clean residual min=-0.026562 max=0.019751 Jy/beam ! Clean residual mean=-0.000064 rms=0.005326 Jy/beam ! Combined flux in latest and established models = 1.9164 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 1.9164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.261717Jy sigma=0.000930 ! Fit after self-cal, rms=0.261402Jy sigma=0.000921 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.261402Jy sigma=0.000921 ! Fit after self-cal, rms=0.233637Jy sigma=0.000739 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9865 mas, bmaj=1.208 mas, bpa=5.262 degrees ! Estimated noise=969.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015781 Jy ! Component: 100 - total flux cleaned = 0.0182726 Jy ! Component: 150 - total flux cleaned = 0.01884 Jy ! Component: 200 - total flux cleaned = 0.0191026 Jy ! Total flux subtracted in 200 components = 0.0191026 Jy ! Clean residual min=-0.007426 max=0.010788 Jy/beam ! Clean residual mean=0.000004 rms=0.002295 Jy/beam ! Combined flux in latest and established models = 1.93551 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 1.93551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.232279Jy sigma=0.000719 ! Fit after self-cal, rms=0.232225Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735673 Jy ! Component: 100 - total flux cleaned = 0.00907064 Jy ! Component: 150 - total flux cleaned = 0.00862794 Jy ! Component: 200 - total flux cleaned = 0.008002 Jy ! Total flux subtracted in 200 components = 0.008002 Jy ! Clean residual min=-0.007300 max=0.010174 Jy/beam ! Clean residual mean=0.000009 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 1.94351 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 1.94351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.231565Jy sigma=0.000707 ! Fit after self-cal, rms=0.231501Jy sigma=0.000706 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (2.2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049968 Jy ! Component: 100 - total flux cleaned = 0.00380673 Jy ! Component: 150 - total flux cleaned = 0.00339077 Jy ! Component: 200 - total flux cleaned = 0.00263746 Jy ! Total flux subtracted in 200 components = 0.00263746 Jy ! Clean residual min=-0.006495 max=0.009120 Jy/beam ! Clean residual mean=0.000011 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 1.94614 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 1.94614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.231004Jy sigma=0.000698 ! Fit after self-cal, rms=0.230976Jy sigma=0.000698 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (12.8, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642304 Jy ! Component: 100 - total flux cleaned = 0.00721887 Jy ! Component: 150 - total flux cleaned = 0.00705806 Jy ! Component: 200 - total flux cleaned = 0.00658527 Jy ! Total flux subtracted in 200 components = 0.00658527 Jy ! Clean residual min=-0.006208 max=0.007671 Jy/beam ! Clean residual mean=0.000007 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 1.95273 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 1.95273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.230622Jy sigma=0.000692 ! Fit after self-cal, rms=0.230583Jy sigma=0.000692 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (18, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340286 Jy ! Component: 100 - total flux cleaned = 0.0028292 Jy ! Component: 150 - total flux cleaned = 0.00236241 Jy ! Component: 200 - total flux cleaned = 0.0017733 Jy ! Total flux subtracted in 200 components = 0.0017733 Jy ! Clean residual min=-0.005826 max=0.006743 Jy/beam ! Clean residual mean=0.000009 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 1.9545 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 1.9545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.230316Jy sigma=0.000687 ! Fit after self-cal, rms=0.230294Jy sigma=0.000686 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.230294Jy sigma=0.000686 ! Fit after self-cal, rms=0.230188Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9843 mas, bmaj=1.205 mas, bpa=4.811 degrees ! Estimated noise=970.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647168 Jy ! Component: 100 - total flux cleaned = 0.00854184 Jy ! Component: 150 - total flux cleaned = 0.00973943 Jy ! Component: 200 - total flux cleaned = 0.0100195 Jy ! Total flux subtracted in 200 components = 0.0100195 Jy ! Clean residual min=-0.005171 max=0.005961 Jy/beam ! Clean residual mean=0.000005 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 1.96452 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 111 components and 1.96452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229944Jy sigma=0.000677 ! Fit after self-cal, rms=0.229912Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013986 Jy ! Component: 100 - total flux cleaned = 0.00114211 Jy ! Component: 150 - total flux cleaned = 0.000654168 Jy ! Component: 200 - total flux cleaned = 7.67265e-05 Jy ! Total flux subtracted in 200 components = 7.67265e-05 Jy ! Clean residual min=-0.005078 max=0.005457 Jy/beam ! Clean residual mean=0.000006 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 1.9646 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 120 components and 1.9646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229797Jy sigma=0.000675 ! Fit after self-cal, rms=0.229788Jy sigma=0.000675 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229788Jy sigma=0.000675 ! Fit after self-cal, rms=0.230068Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.112 mas, bmaj=2.408 mas, bpa=41.94 degrees ! Estimated noise=1366.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309072 Jy ! Component: 100 - total flux cleaned = 0.00279379 Jy ! Component: 150 - total flux cleaned = 0.00243115 Jy ! Component: 200 - total flux cleaned = 0.0020992 Jy ! Total flux subtracted in 200 components = 0.0020992 Jy ! Clean residual min=-0.005187 max=0.005273 Jy/beam ! Clean residual mean=-0.000000 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 1.9667 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 1.9667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229991Jy sigma=0.000672 ! Fit after self-cal, rms=0.229981Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.68432e-05 Jy ! Component: 100 - total flux cleaned = -0.000462466 Jy ! Component: 150 - total flux cleaned = -0.00067219 Jy ! Component: 200 - total flux cleaned = -0.000739443 Jy ! Total flux subtracted in 200 components = -0.000739443 Jy ! Clean residual min=-0.005217 max=0.005096 Jy/beam ! Clean residual mean=0.000001 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 1.96596 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 1.96596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229961Jy sigma=0.000672 ! Fit after self-cal, rms=0.229960Jy sigma=0.000672 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.983 mas, bmaj=1.204 mas, bpa=4.58 degrees ! Estimated noise=970.434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.983 x 1.204 at 4.58 degrees (North through East) ! Clean map min=-0.0054487 max=1.7117 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229960Jy sigma=0.000672 ! Fit after self-cal, rms=0.223498Jy sigma=0.000620 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9833 mas, bmaj=1.204 mas, bpa=4.508 degrees ! Estimated noise=971.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137134 Jy ! Component: 100 - total flux cleaned = 0.00162207 Jy ! Component: 150 - total flux cleaned = 0.00162152 Jy ! Component: 200 - total flux cleaned = 0.00152099 Jy ! Total flux subtracted in 200 components = 0.00152099 Jy ! Clean residual min=-0.004035 max=0.003908 Jy/beam ! Clean residual mean=0.000002 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 1.96748 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 154 components and 1.96748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223364Jy sigma=0.000617 ! Fit after self-cal, rms=0.223349Jy sigma=0.000617 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380213 Jy ! Component: 100 - total flux cleaned = 0.000748681 Jy ! Component: 150 - total flux cleaned = 0.00074914 Jy ! Component: 200 - total flux cleaned = 0.000918922 Jy ! Total flux subtracted in 200 components = 0.000918922 Jy ! Clean residual min=-0.003903 max=0.003827 Jy/beam ! Clean residual mean=0.000002 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 1.9684 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 167 components and 1.9684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223281Jy sigma=0.000616 ! Fit after self-cal, rms=0.223272Jy sigma=0.000616 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223272Jy sigma=0.000616 ! Fit after self-cal, rms=0.223498Jy sigma=0.000616 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8109 mas, bmaj=0.9826 mas, bpa=-4.605 degrees ! Estimated noise=1467.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.31164 Jy ! Component: 100 - total flux cleaned = 1.62298 Jy ! Component: 150 - total flux cleaned = 1.7506 Jy ! Component: 200 - total flux cleaned = 1.82447 Jy ! Total flux subtracted in 200 components = 1.82447 Jy ! Clean residual min=-0.019496 max=0.039219 Jy/beam ! Clean residual mean=-0.000030 rms=0.005128 Jy/beam ! Combined flux in latest and established models = 1.82447 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.82447 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9829 mas, bmaj=1.203 mas, bpa=4.503 degrees ! Estimated noise=971.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061748 Jy ! Component: 100 - total flux cleaned = 0.0966594 Jy ! Component: 150 - total flux cleaned = 0.117183 Jy ! Component: 200 - total flux cleaned = 0.130474 Jy ! Total flux subtracted in 200 components = 0.130474 Jy ! Clean residual min=-0.006998 max=0.008871 Jy/beam ! Clean residual mean=-0.000005 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 1.95494 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 1.95494 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (10.4, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104577 Jy ! Component: 100 - total flux cleaned = 0.0181598 Jy ! Component: 150 - total flux cleaned = 0.0207595 Jy ! Component: 200 - total flux cleaned = 0.0223506 Jy ! Total flux subtracted in 200 components = 0.0223506 Jy ! Clean residual min=-0.005864 max=0.007352 Jy/beam ! Clean residual mean=0.000004 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 1.97729 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 1.97729 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-2.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331449 Jy ! Component: 100 - total flux cleaned = 0.0037908 Jy ! Component: 150 - total flux cleaned = 0.00446833 Jy ! Component: 200 - total flux cleaned = 0.00448016 Jy ! Total flux subtracted in 200 components = 0.00448016 Jy ! Clean residual min=-0.005535 max=0.006447 Jy/beam ! Clean residual mean=0.000007 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 1.98177 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 63 components and 1.98177 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (3.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044498 Jy ! Component: 100 - total flux cleaned = 0.00545715 Jy ! Component: 150 - total flux cleaned = 0.00546026 Jy ! Component: 200 - total flux cleaned = 0.00546575 Jy ! Total flux subtracted in 200 components = 0.00546575 Jy ! Clean residual min=-0.005026 max=0.005725 Jy/beam ! Clean residual mean=0.000009 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 1.98724 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 77 components and 1.98724 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-13.4, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442384 Jy ! Component: 100 - total flux cleaned = 0.0049349 Jy ! Component: 150 - total flux cleaned = 0.00493939 Jy ! Component: 200 - total flux cleaned = 0.00477884 Jy ! Total flux subtracted in 200 components = 0.00477884 Jy ! Clean residual min=-0.004642 max=0.004982 Jy/beam ! Clean residual mean=0.000008 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 1.99202 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 92 components and 1.99202 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.111 mas, bmaj=2.409 mas, bpa=41.95 degrees ! Estimated noise=1369.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00207099 Jy ! Component: 100 - total flux cleaned = -0.00333329 Jy ! Component: 150 - total flux cleaned = -0.00433384 Jy ! Component: 200 - total flux cleaned = -0.00532755 Jy ! Total flux subtracted in 200 components = -0.00532755 Jy ! Clean residual min=-0.004414 max=0.003895 Jy/beam ! Clean residual mean=0.000010 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 1.98669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000992574 Jy ! Component: 100 - total flux cleaned = -0.00160623 Jy ! Component: 150 - total flux cleaned = -0.00232285 Jy ! Component: 200 - total flux cleaned = -0.00312411 Jy ! Total flux subtracted in 200 components = -0.00312411 Jy ! Clean residual min=-0.004224 max=0.003667 Jy/beam ! Clean residual mean=0.000007 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 1.98356 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 135 components and 1.98356 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9829 mas, bmaj=1.203 mas, bpa=4.503 degrees ! Estimated noise=971.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000828121 Jy ! Component: 100 - total flux cleaned = -0.000978953 Jy ! Component: 150 - total flux cleaned = -0.0014094 Jy ! Component: 200 - total flux cleaned = -0.00168032 Jy ! Total flux subtracted in 200 components = -0.00168032 Jy ! Clean residual min=-0.004158 max=0.004384 Jy/beam ! Clean residual mean=0.000005 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 1.98188 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 140 components and 1.98188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.223674Jy sigma=0.000620 ! Fit after self-cal, rms=0.223547Jy sigma=0.000619 wmodel J0102+5824_X_2017_04_28_pus_map.mod ! Writing 140 model components to file: J0102+5824_X_2017_04_28_pus_map.mod wobs J0102+5824_X_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0102+5824_X_2017_04_28_pus_uvs.fits wwins J0102+5824_X_2017_04_28_pus_map.win ! wwins: Wrote 10 windows to J0102+5824_X_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016994 Jy ! Component: 100 - total flux cleaned = 0.00199306 Jy ! Component: 150 - total flux cleaned = 0.00227213 Jy ! Component: 200 - total flux cleaned = 0.00254319 Jy ! Component: 250 - total flux cleaned = 0.0028053 Jy ! Component: 300 - total flux cleaned = 0.00312312 Jy ! Component: 350 - total flux cleaned = 0.00355617 Jy ! Component: 400 - total flux cleaned = 0.00361621 Jy ! Component: 450 - total flux cleaned = 0.00367577 Jy ! Component: 500 - total flux cleaned = 0.00385067 Jy ! Component: 550 - total flux cleaned = 0.00385155 Jy ! Component: 600 - total flux cleaned = 0.0040197 Jy ! Component: 650 - total flux cleaned = 0.00396516 Jy ! Component: 700 - total flux cleaned = 0.0040187 Jy ! Component: 750 - total flux cleaned = 0.00380822 Jy ! Component: 800 - total flux cleaned = 0.00380899 Jy ! Component: 850 - total flux cleaned = 0.00380869 Jy ! Component: 900 - total flux cleaned = 0.00375726 Jy ! Component: 950 - total flux cleaned = 0.00350887 Jy ! Component: 1000 - total flux cleaned = 0.00350971 Jy ! Component: 1050 - total flux cleaned = 0.00322027 Jy ! Component: 1100 - total flux cleaned = 0.00322038 Jy ! Component: 1150 - total flux cleaned = 0.00312618 Jy ! Component: 1200 - total flux cleaned = 0.00298735 Jy ! Component: 1250 - total flux cleaned = 0.00289433 Jy ! Component: 1300 - total flux cleaned = 0.00275758 Jy ! Component: 1350 - total flux cleaned = 0.00275695 Jy ! Component: 1400 - total flux cleaned = 0.00271228 Jy ! Component: 1450 - total flux cleaned = 0.00244957 Jy ! Component: 1500 - total flux cleaned = 0.00240611 Jy ! Component: 1550 - total flux cleaned = 0.00223547 Jy ! Component: 1600 - total flux cleaned = 0.00210852 Jy ! Component: 1650 - total flux cleaned = 0.00219303 Jy ! Component: 1700 - total flux cleaned = 0.0021097 Jy ! Component: 1750 - total flux cleaned = 0.00198656 Jy ! Component: 1800 - total flux cleaned = 0.0019868 Jy ! Component: 1850 - total flux cleaned = 0.00202679 Jy ! Component: 1900 - total flux cleaned = 0.00194651 Jy ! Component: 1950 - total flux cleaned = 0.00170987 Jy ! Component: 2000 - total flux cleaned = 0.00163258 Jy ! Total flux subtracted in 2048 components = 0.00167158 Jy ! Clean residual min=-0.001993 max=0.002360 Jy/beam ! Clean residual mean=0.000001 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 1.98356 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 280 components and 1.98355 Jy ![Exited script file: muppet] wmap "J0102+5824_X_2017_04_28_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9829 x 1.203 at 4.503 degrees (North through East) ! Clean map min=-0.004369 max=1.7125 Jy/beam ! Writing clean map to FITS file: J0102+5824_X_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.71252 invert ! Inverting map ! Your choice of large map pixels excluded 0.0605% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000683731 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.119776 0.119776 0.239553 0.479106 0.958212 1.91642 3.83285 7.66569 15.3314 30.6628 61.3256 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.712 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9829 x 1.203 at 4.503 degrees (North through East) ! Clean map min=-0.004369 max=1.7125 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0102+5824_X_2017_04_28_pus_uvs.log closed on Mon Apr 29 14:22:54 2019