! Started logfile: J0102+5824_X_2017_03_27_pus_uvs.log on Sat Apr 27 21:57:08 2019 obs J0102+5824_X_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0102+5824_X_2017_03_27_pus_uva.fits ! AN table 1: 64 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.825 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1844 lines of history. ! ! Reading 28512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0102+5824_X_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.833661Jy sigma=0.007153 ! Fit after self-cal, rms=0.829893Jy sigma=0.007122 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7583 mas, bmaj=1.076 mas, bpa=-2.152 degrees ! Estimated noise=797.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29835 Jy ! Component: 100 - total flux cleaned = 1.62538 Jy ! Total flux subtracted in 100 components = 1.62538 Jy ! Clean residual min=-0.030997 max=0.134157 Jy/beam ! Clean residual mean=0.000047 rms=0.009680 Jy/beam ! Combined flux in latest and established models = 1.62538 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.62538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.342584Jy sigma=0.002823 ! Fit after self-cal, rms=0.342460Jy sigma=0.002822 ! Inverting map ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153662 Jy ! Component: 100 - total flux cleaned = 0.244533 Jy ! Total flux subtracted in 100 components = 0.244533 Jy ! Clean residual min=-0.033602 max=0.046795 Jy/beam ! Clean residual mean=0.000058 rms=0.006058 Jy/beam ! Combined flux in latest and established models = 1.86991 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 1.86991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.236947Jy sigma=0.001805 ! Fit after self-cal, rms=0.236200Jy sigma=0.001799 ! Inverting map ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057706 Jy ! Component: 100 - total flux cleaned = 0.0950823 Jy ! Total flux subtracted in 100 components = 0.0950823 Jy ! Clean residual min=-0.033014 max=0.036609 Jy/beam ! Clean residual mean=0.000064 rms=0.005234 Jy/beam ! Combined flux in latest and established models = 1.96499 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 1.96499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.216677Jy sigma=0.001599 ! Fit after self-cal, rms=0.216320Jy sigma=0.001596 ! Inverting map ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344468 Jy ! Component: 100 - total flux cleaned = 0.0506609 Jy ! Total flux subtracted in 100 components = 0.0506609 Jy ! Clean residual min=-0.032034 max=0.020705 Jy/beam ! Clean residual mean=0.000069 rms=0.004920 Jy/beam ! Combined flux in latest and established models = 2.01565 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 2.01565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.210656Jy sigma=0.001541 ! Fit after self-cal, rms=0.210128Jy sigma=0.001536 ! Inverting map ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9822 mas, bmaj=1.351 mas, bpa=0.2436 degrees ! Estimated noise=503.936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127397 Jy ! Component: 100 - total flux cleaned = 0.0149573 Jy ! Component: 150 - total flux cleaned = 0.0160412 Jy ! Component: 200 - total flux cleaned = 0.0163491 Jy ! Total flux subtracted in 200 components = 0.0163491 Jy ! Clean residual min=-0.020846 max=0.020490 Jy/beam ! Clean residual mean=0.000144 rms=0.004694 Jy/beam ! Combined flux in latest and established models = 2.032 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 2.032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.208220Jy sigma=0.001519 ! Fit after self-cal, rms=0.208004Jy sigma=0.001518 ! Inverting map ! Your choice of large map pixels excluded 0.0912% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.03 KP 0.99 ! LA 1.00 MK 1.03 NL 0.97 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 1.01 ! LA 1.00 MK 1.02 NL 0.98 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.98 KP 0.95 ! LA 1.03 MK 1.05 NL 0.97 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.01 KP 0.98 ! LA 1.03 MK 1.05 NL 0.98 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.97 KP 0.98 ! LA 1.02 MK 1.06 NL 0.97 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.00 KP 0.97 ! LA 1.02 MK 1.05 NL 0.97 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.99 KP 0.97 ! LA 1.04 MK 1.05 NL 0.97 OV 1.01 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.98 KP 0.98 ! LA 1.01 MK 1.04 NL 0.97 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.99 KP 0.97 ! LA 1.03 MK 1.03 NL 0.96 OV 1.00 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.03 KP 0.87 ! LA 1.03 MK 1.04 NL 0.86 OV 1.08 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.08 KP 0.99 ! LA 1.10 MK 1.11 NL 0.92 OV 1.14 ! PT 1.15 SC 1.05 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.03 KP 1.01 ! LA 1.04 MK 1.06 NL 0.89 OV 1.11 ! PT 1.11 SC 1.02 ! ! ! Fit before self-cal, rms=0.208004Jy sigma=0.001518 ! Fit after self-cal, rms=0.172991Jy sigma=0.001154 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9947 mas, bmaj=1.359 mas, bpa=0.2832 degrees ! Estimated noise=504.812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123702 Jy ! Component: 100 - total flux cleaned = -0.00125157 Jy ! Component: 150 - total flux cleaned = -0.00125319 Jy ! Component: 200 - total flux cleaned = -0.00149549 Jy ! Total flux subtracted in 200 components = -0.00149549 Jy ! Clean residual min=-0.016352 max=0.016077 Jy/beam ! Clean residual mean=0.000018 rms=0.003546 Jy/beam ! Combined flux in latest and established models = 2.03051 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 2.03051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169759Jy sigma=0.001137 ! Fit after self-cal, rms=0.169421Jy sigma=0.001134 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169421Jy sigma=0.001134 ! Fit after self-cal, rms=0.107302Jy sigma=0.000719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9898 mas, bmaj=1.362 mas, bpa=-0.1986 degrees ! Estimated noise=504.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183796 Jy ! Component: 100 - total flux cleaned = 0.0018506 Jy ! Component: 150 - total flux cleaned = 0.00205659 Jy ! Component: 200 - total flux cleaned = 0.00188992 Jy ! Total flux subtracted in 200 components = 0.00188992 Jy ! Clean residual min=-0.005619 max=0.006392 Jy/beam ! Clean residual mean=0.000022 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 2.0324 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 2.0324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106399Jy sigma=0.000709 ! Fit after self-cal, rms=0.106365Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400003 Jy ! Component: 100 - total flux cleaned = 0.00475905 Jy ! Component: 150 - total flux cleaned = 0.00525688 Jy ! Component: 200 - total flux cleaned = 0.00526381 Jy ! Total flux subtracted in 200 components = 0.00526381 Jy ! Clean residual min=-0.005658 max=0.004659 Jy/beam ! Clean residual mean=0.000023 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 2.03766 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 2.03766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105733Jy sigma=0.000702 ! Fit after self-cal, rms=0.105672Jy sigma=0.000701 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105672Jy sigma=0.000701 ! Fit after self-cal, rms=0.104934Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9889 mas, bmaj=1.364 mas, bpa=-0.4036 degrees ! Estimated noise=504.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015556 Jy ! Component: 100 - total flux cleaned = 0.0019149 Jy ! Component: 150 - total flux cleaned = 0.00222011 Jy ! Component: 200 - total flux cleaned = 0.00249991 Jy ! Total flux subtracted in 200 components = 0.00249991 Jy ! Clean residual min=-0.004634 max=0.004083 Jy/beam ! Clean residual mean=0.000008 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 2.04016 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 2.04016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104362Jy sigma=0.000685 ! Fit after self-cal, rms=0.104315Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937315 Jy ! Component: 100 - total flux cleaned = 0.00131889 Jy ! Component: 150 - total flux cleaned = 0.00154222 Jy ! Component: 200 - total flux cleaned = 0.00174778 Jy ! Total flux subtracted in 200 components = 0.00174778 Jy ! Clean residual min=-0.005128 max=0.003712 Jy/beam ! Clean residual mean=0.000009 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 2.04191 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 2.04191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104028Jy sigma=0.000682 ! Fit after self-cal, rms=0.104000Jy sigma=0.000682 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104000Jy sigma=0.000682 ! Fit after self-cal, rms=0.104102Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.383 mas, bmaj=2.505 mas, bpa=-6.318 degrees ! Estimated noise=638.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112948 Jy ! Component: 100 - total flux cleaned = 0.00133682 Jy ! Component: 150 - total flux cleaned = 0.00157784 Jy ! Component: 200 - total flux cleaned = 0.00177551 Jy ! Total flux subtracted in 200 components = 0.00177551 Jy ! Clean residual min=-0.002461 max=0.003085 Jy/beam ! Clean residual mean=0.000022 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 2.04369 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 2.04369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103943Jy sigma=0.000679 ! Fit after self-cal, rms=0.103915Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479894 Jy ! Component: 100 - total flux cleaned = 0.000668949 Jy ! Component: 150 - total flux cleaned = 0.000779198 Jy ! Component: 200 - total flux cleaned = 0.000826266 Jy ! Total flux subtracted in 200 components = 0.000826266 Jy ! Clean residual min=-0.002323 max=0.002955 Jy/beam ! Clean residual mean=0.000022 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 2.04451 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 2.04451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103834Jy sigma=0.000678 ! Fit after self-cal, rms=0.103823Jy sigma=0.000678 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9883 mas, bmaj=1.366 mas, bpa=-0.5878 degrees ! Estimated noise=505.027 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9883 x 1.366 at -0.5878 degrees (North through East) ! Clean map min=-0.003865 max=1.7335 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103823Jy sigma=0.000678 ! Fit after self-cal, rms=0.098891Jy sigma=0.000633 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9884 mas, bmaj=1.368 mas, bpa=-0.6907 degrees ! Estimated noise=504.983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042249 Jy ! Component: 100 - total flux cleaned = 0.000412943 Jy ! Component: 150 - total flux cleaned = 0.000630954 Jy ! Component: 200 - total flux cleaned = 0.000635061 Jy ! Total flux subtracted in 200 components = 0.000635061 Jy ! Clean residual min=-0.004149 max=0.003172 Jy/beam ! Clean residual mean=0.000008 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 2.04515 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 2.04515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098559Jy sigma=0.000630 ! Fit after self-cal, rms=0.098539Jy sigma=0.000630 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93002e-05 Jy ! Component: 100 - total flux cleaned = 0.000181777 Jy ! Component: 150 - total flux cleaned = 0.000182281 Jy ! Component: 200 - total flux cleaned = 0.000103299 Jy ! Total flux subtracted in 200 components = 0.000103299 Jy ! Clean residual min=-0.004309 max=0.003107 Jy/beam ! Clean residual mean=0.000007 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 2.04525 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 2.04525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098373Jy sigma=0.000628 ! Fit after self-cal, rms=0.098365Jy sigma=0.000628 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098365Jy sigma=0.000628 ! Fit after self-cal, rms=0.098498Jy sigma=0.000627 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.761 mas, bmaj=1.097 mas, bpa=-3.269 degrees ! Estimated noise=805.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.30953 Jy ! Component: 100 - total flux cleaned = 1.63051 Jy ! Component: 150 - total flux cleaned = 1.77731 Jy ! Component: 200 - total flux cleaned = 1.86327 Jy ! Total flux subtracted in 200 components = 1.86327 Jy ! Clean residual min=-0.013328 max=0.045831 Jy/beam ! Clean residual mean=-0.000004 rms=0.003693 Jy/beam ! Combined flux in latest and established models = 1.86327 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.86327 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9879 mas, bmaj=1.369 mas, bpa=-0.822 degrees ! Estimated noise=505.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0775043 Jy ! Component: 100 - total flux cleaned = 0.118996 Jy ! Component: 150 - total flux cleaned = 0.142535 Jy ! Component: 200 - total flux cleaned = 0.15709 Jy ! Total flux subtracted in 200 components = 0.15709 Jy ! Clean residual min=-0.005100 max=0.010014 Jy/beam ! Clean residual mean=0.000000 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 2.02036 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 2.02036 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785732 Jy ! Component: 100 - total flux cleaned = 0.0106093 Jy ! Component: 150 - total flux cleaned = 0.0127811 Jy ! Component: 200 - total flux cleaned = 0.0142006 Jy ! Total flux subtracted in 200 components = 0.0142006 Jy ! Clean residual min=-0.004426 max=0.005183 Jy/beam ! Clean residual mean=0.000005 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 2.03456 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 53 components and 2.03456 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163622 Jy ! Component: 100 - total flux cleaned = 0.00235709 Jy ! Component: 150 - total flux cleaned = 0.00304796 Jy ! Component: 200 - total flux cleaned = 0.00349322 Jy ! Total flux subtracted in 200 components = 0.00349322 Jy ! Clean residual min=-0.004236 max=0.004331 Jy/beam ! Clean residual mean=0.000006 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 2.03805 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 2.03805 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-3.8, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183268 Jy ! Component: 100 - total flux cleaned = 0.00222725 Jy ! Component: 150 - total flux cleaned = 0.00241858 Jy ! Component: 200 - total flux cleaned = 0.00278501 Jy ! Total flux subtracted in 200 components = 0.00278501 Jy ! Clean residual min=-0.003632 max=0.003877 Jy/beam ! Clean residual mean=0.000007 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 2.04084 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 2.04084 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-6.4, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119315 Jy ! Component: 100 - total flux cleaned = 0.00136562 Jy ! Component: 150 - total flux cleaned = 0.00169571 Jy ! Component: 200 - total flux cleaned = 0.00217563 Jy ! Total flux subtracted in 200 components = 0.00217563 Jy ! Clean residual min=-0.003042 max=0.003408 Jy/beam ! Clean residual mean=0.000009 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 2.04301 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 2.04301 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1.2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000539596 Jy ! Component: 100 - total flux cleaned = 0.000689111 Jy ! Component: 150 - total flux cleaned = 0.000972356 Jy ! Component: 200 - total flux cleaned = 0.0011134 Jy ! Total flux subtracted in 200 components = 0.0011134 Jy ! Clean residual min=-0.002736 max=0.003211 Jy/beam ! Clean residual mean=0.000009 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 2.04413 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 2.04413 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-3.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676502 Jy ! Component: 100 - total flux cleaned = 0.000809322 Jy ! Component: 150 - total flux cleaned = 0.000935067 Jy ! Component: 200 - total flux cleaned = 0.00106164 Jy ! Total flux subtracted in 200 components = 0.00106164 Jy ! Clean residual min=-0.002558 max=0.002980 Jy/beam ! Clean residual mean=0.000010 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 2.04519 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 2.04519 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (6.4, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153199 Jy ! Component: 100 - total flux cleaned = 0.00164695 Jy ! Component: 150 - total flux cleaned = 0.0018731 Jy ! Component: 200 - total flux cleaned = 0.0019817 Jy ! Total flux subtracted in 200 components = 0.0019817 Jy ! Clean residual min=-0.002495 max=0.002809 Jy/beam ! Clean residual mean=0.000011 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 2.04717 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 96 components and 2.04717 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194286 Jy ! Component: 100 - total flux cleaned = 0.0021567 Jy ! Component: 150 - total flux cleaned = 0.00216067 Jy ! Component: 200 - total flux cleaned = 0.00226345 Jy ! Total flux subtracted in 200 components = 0.00226345 Jy ! Clean residual min=-0.002450 max=0.002531 Jy/beam ! Clean residual mean=0.000012 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 2.04943 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 106 components and 2.04943 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.381 mas, bmaj=2.507 mas, bpa=-6.761 degrees ! Estimated noise=638.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014636 Jy ! Component: 100 - total flux cleaned = 0.00160298 Jy ! Component: 150 - total flux cleaned = 0.00164368 Jy ! Component: 200 - total flux cleaned = 0.0016432 Jy ! Total flux subtracted in 200 components = 0.0016432 Jy ! Clean residual min=-0.002113 max=0.001934 Jy/beam ! Clean residual mean=0.000029 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 2.05108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.29371e-07 Jy ! Component: 100 - total flux cleaned = 3.19933e-05 Jy ! Component: 150 - total flux cleaned = 9.02067e-05 Jy ! Component: 200 - total flux cleaned = 0.000143519 Jy ! Total flux subtracted in 200 components = 0.000143519 Jy ! Clean residual min=-0.002077 max=0.001920 Jy/beam ! Clean residual mean=0.000029 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 2.05122 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 147 components and 2.05122 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.9879 mas, bmaj=1.369 mas, bpa=-0.822 degrees ! Estimated noise=505.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.25362e-06 Jy ! Component: 100 - total flux cleaned = -0.000106004 Jy ! Component: 150 - total flux cleaned = -0.000199599 Jy ! Component: 200 - total flux cleaned = -0.000199803 Jy ! Total flux subtracted in 200 components = -0.000199803 Jy ! Clean residual min=-0.002350 max=0.002468 Jy/beam ! Clean residual mean=0.000013 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 2.05102 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 153 components and 2.05102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098355Jy sigma=0.000624 ! Fit after self-cal, rms=0.098228Jy sigma=0.000623 wmodel J0102+5824_X_2017_03_27_pus_map.mod ! Writing 153 model components to file: J0102+5824_X_2017_03_27_pus_map.mod wobs J0102+5824_X_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0102+5824_X_2017_03_27_pus_uvs.fits wwins J0102+5824_X_2017_03_27_pus_map.win ! wwins: Wrote 11 windows to J0102+5824_X_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072329 Jy ! Component: 100 - total flux cleaned = 0.00103568 Jy ! Component: 150 - total flux cleaned = 0.00115978 Jy ! Component: 200 - total flux cleaned = 0.0012789 Jy ! Component: 250 - total flux cleaned = 0.00139431 Jy ! Component: 300 - total flux cleaned = 0.00154387 Jy ! Component: 350 - total flux cleaned = 0.00165379 Jy ! Component: 400 - total flux cleaned = 0.00179757 Jy ! Component: 450 - total flux cleaned = 0.00190388 Jy ! Component: 500 - total flux cleaned = 0.00211326 Jy ! Component: 550 - total flux cleaned = 0.00225105 Jy ! Component: 600 - total flux cleaned = 0.00238745 Jy ! Component: 650 - total flux cleaned = 0.00255629 Jy ! Component: 700 - total flux cleaned = 0.00275645 Jy ! Component: 750 - total flux cleaned = 0.0028881 Jy ! Component: 800 - total flux cleaned = 0.00301907 Jy ! Component: 850 - total flux cleaned = 0.0031813 Jy ! Component: 900 - total flux cleaned = 0.00340629 Jy ! Component: 950 - total flux cleaned = 0.00356547 Jy ! Component: 1000 - total flux cleaned = 0.00369165 Jy ! Component: 1050 - total flux cleaned = 0.00378557 Jy ! Component: 1100 - total flux cleaned = 0.00387906 Jy ! Component: 1150 - total flux cleaned = 0.0040334 Jy ! Component: 1200 - total flux cleaned = 0.0041561 Jy ! Component: 1250 - total flux cleaned = 0.0042473 Jy ! Component: 1300 - total flux cleaned = 0.00436831 Jy ! Component: 1350 - total flux cleaned = 0.0044885 Jy ! Component: 1400 - total flux cleaned = 0.00466715 Jy ! Component: 1450 - total flux cleaned = 0.00472629 Jy ! Component: 1500 - total flux cleaned = 0.00484419 Jy ! Component: 1550 - total flux cleaned = 0.0049615 Jy ! Component: 1600 - total flux cleaned = 0.00504828 Jy ! Component: 1650 - total flux cleaned = 0.00501937 Jy ! Component: 1700 - total flux cleaned = 0.00519206 Jy ! Component: 1750 - total flux cleaned = 0.00527793 Jy ! Component: 1800 - total flux cleaned = 0.00539167 Jy ! Component: 1850 - total flux cleaned = 0.00541968 Jy ! Component: 1900 - total flux cleaned = 0.00550414 Jy ! Component: 1950 - total flux cleaned = 0.00558771 Jy ! Component: 2000 - total flux cleaned = 0.00569866 Jy ! Total flux subtracted in 2048 components = 0.00572627 Jy ! Clean residual min=-0.001376 max=0.001377 Jy/beam ! Clean residual mean=0.000011 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 2.05675 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 286 components and 2.05675 Jy ![Exited script file: muppet] wmap "J0102+5824_X_2017_03_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9879 x 1.369 at -0.822 degrees (North through East) ! Clean map min=-0.0030689 max=1.7369 Jy/beam ! Writing clean map to FITS file: J0102+5824_X_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.73693 invert ! Inverting map ! Your choice of large map pixels excluded 0.0913% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000480339 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0829632 0.0829632 0.165926 0.331853 0.663705 1.32741 2.65482 5.30964 10.6193 21.2386 42.4771 84.9543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.736 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9879 x 1.369 at -0.822 degrees (North through East) ! Clean map min=-0.0030689 max=1.7369 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0102+5824_X_2017_03_27_pus_uvs.log closed on Sat Apr 27 21:57:11 2019