! Started logfile: J0102+5824_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:38 2019 obs J0102+5824_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0102+5824_S_2017_06_10_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.319807 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0102+5824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0102+5824_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.689355Jy sigma=0.006796 ! Fit after self-cal, rms=0.533142Jy sigma=0.005407 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=13.4 mas, bpa=48.12 degrees ! Estimated noise=2665.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11683 Jy ! Component: 100 - total flux cleaned = 1.39423 Jy ! Total flux subtracted in 100 components = 1.39423 Jy ! Clean residual min=-0.063831 max=0.114316 Jy/beam ! Clean residual mean=-0.000496 rms=0.028075 Jy/beam ! Combined flux in latest and established models = 1.39423 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.39423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229065Jy sigma=0.002225 ! Fit after self-cal, rms=0.229067Jy sigma=0.002225 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.525 mas, bmaj=12.19 mas, bpa=48.59 degrees ! Estimated noise=2161.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14056 Jy ! Component: 100 - total flux cleaned = 0.20417 Jy ! Component: 150 - total flux cleaned = 0.238088 Jy ! Component: 200 - total flux cleaned = 0.251127 Jy ! Total flux subtracted in 200 components = 0.251127 Jy ! Clean residual min=-0.015098 max=0.015254 Jy/beam ! Clean residual mean=-0.000008 rms=0.005005 Jy/beam ! Combined flux in latest and established models = 1.64536 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 64 components and 1.64536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122246Jy sigma=0.001181 ! Fit after self-cal, rms=0.122217Jy sigma=0.001181 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00* KP 1.01 ! LA 1.01 MK 1.04 NL 1.00* OV 1.01 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.00* KP 0.98 ! LA 0.96 MK 0.97 NL 1.00* OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 1.00* KP 0.98 ! LA 0.99 MK 1.04 NL 1.00* OV 0.95 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.122217Jy sigma=0.001181 ! Fit after self-cal, rms=0.097808Jy sigma=0.000939 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.731 mas, bmaj=11.85 mas, bpa=49.37 degrees ! Estimated noise=2207.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574079 Jy ! Component: 100 - total flux cleaned = 0.00808768 Jy ! Component: 150 - total flux cleaned = 0.00943332 Jy ! Component: 200 - total flux cleaned = 0.0103288 Jy ! Total flux subtracted in 200 components = 0.0103288 Jy ! Clean residual min=-0.003582 max=0.003585 Jy/beam ! Clean residual mean=-0.000016 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 1.65569 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 123 components and 1.65569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095662Jy sigma=0.000918 ! Fit after self-cal, rms=0.095642Jy sigma=0.000918 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095642Jy sigma=0.000918 ! Fit after self-cal, rms=0.095298Jy sigma=0.000918 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.728 mas, bmaj=11.84 mas, bpa=49.36 degrees ! Estimated noise=2205.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044563 Jy ! Component: 100 - total flux cleaned = 0.00595323 Jy ! Component: 150 - total flux cleaned = 0.00672464 Jy ! Component: 200 - total flux cleaned = 0.00716214 Jy ! Total flux subtracted in 200 components = 0.00716214 Jy ! Clean residual min=-0.002339 max=0.002370 Jy/beam ! Clean residual mean=-0.000006 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 1.66285 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 162 components and 1.66285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094743Jy sigma=0.000913 ! Fit after self-cal, rms=0.094741Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284115 Jy ! Component: 100 - total flux cleaned = 0.000287118 Jy ! Component: 150 - total flux cleaned = 0.000524863 Jy ! Component: 200 - total flux cleaned = 0.000752772 Jy ! Total flux subtracted in 200 components = 0.000752772 Jy ! Clean residual min=-0.001833 max=0.001820 Jy/beam ! Clean residual mean=-0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 1.66361 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 191 components and 1.66361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094445Jy sigma=0.000910 ! Fit after self-cal, rms=0.094444Jy sigma=0.000910 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094444Jy sigma=0.000910 ! Fit after self-cal, rms=0.094357Jy sigma=0.000910 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.728 mas, bmaj=11.84 mas, bpa=49.36 degrees ! Estimated noise=2205.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150846 Jy ! Component: 100 - total flux cleaned = 0.00181626 Jy ! Component: 150 - total flux cleaned = 0.00211228 Jy ! Component: 200 - total flux cleaned = 0.00239613 Jy ! Total flux subtracted in 200 components = 0.00239613 Jy ! Clean residual min=-0.001563 max=0.001573 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 1.666 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 223 components and 1.666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094153Jy sigma=0.000908 ! Fit after self-cal, rms=0.094153Jy sigma=0.000908 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00074767 Jy ! Component: 100 - total flux cleaned = -0.00102334 Jy ! Component: 150 - total flux cleaned = -0.00129579 Jy ! Component: 200 - total flux cleaned = -0.00129441 Jy ! Total flux subtracted in 200 components = -0.00129441 Jy ! Clean residual min=-0.001519 max=0.001518 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 1.66471 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 259 components and 1.66471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094004Jy sigma=0.000907 ! Fit after self-cal, rms=0.094003Jy sigma=0.000907 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094003Jy sigma=0.000907 ! Fit after self-cal, rms=0.093971Jy sigma=0.000907 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.386 mas, bmaj=13.65 mas, bpa=62.91 degrees ! Estimated noise=2457.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436806 Jy ! Component: 100 - total flux cleaned = -0.000393319 Jy ! Component: 150 - total flux cleaned = -0.000153813 Jy ! Component: 200 - total flux cleaned = -7.59585e-05 Jy ! Total flux subtracted in 200 components = -7.59585e-05 Jy ! Clean residual min=-0.000643 max=0.000647 Jy/beam ! Clean residual mean=0.000002 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 1.66463 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 302 components and 1.66463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093924Jy sigma=0.000906 ! Fit after self-cal, rms=0.093924Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.70134e-06 Jy ! Component: 100 - total flux cleaned = 0.000246581 Jy ! Component: 150 - total flux cleaned = 0.000508008 Jy ! Component: 200 - total flux cleaned = 0.000506559 Jy ! Total flux subtracted in 200 components = 0.000506559 Jy ! Clean residual min=-0.000688 max=0.000701 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 1.66514 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 340 components and 1.66514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093876Jy sigma=0.000906 ! Fit after self-cal, rms=0.093876Jy sigma=0.000906 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.73 mas, bmaj=11.84 mas, bpa=49.37 degrees ! Estimated noise=2205.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.73 x 11.84 at 49.37 degrees (North through East) ! Clean map min=-0.0051235 max=1.4077 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093876Jy sigma=0.000906 ! Fit after self-cal, rms=0.065577Jy sigma=0.000601 ! Inverting map and beam ! Estimated beam: bmin=4.731 mas, bmaj=11.84 mas, bpa=49.37 degrees ! Estimated noise=2205.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.67555e-05 Jy ! Component: 100 - total flux cleaned = -0.000176654 Jy ! Component: 150 - total flux cleaned = -0.000223602 Jy ! Component: 200 - total flux cleaned = -0.000268532 Jy ! Total flux subtracted in 200 components = -0.000268532 Jy ! Clean residual min=-0.000734 max=0.000737 Jy/beam ! Clean residual mean=-0.000005 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 1.66487 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 375 components and 1.66487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065478Jy sigma=0.000600 ! Fit after self-cal, rms=0.065478Jy sigma=0.000600 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.34e-05 Jy ! Component: 100 - total flux cleaned = 0.000133357 Jy ! Component: 150 - total flux cleaned = 0.000173447 Jy ! Component: 200 - total flux cleaned = 0.000325367 Jy ! Total flux subtracted in 200 components = 0.000325367 Jy ! Clean residual min=-0.000622 max=0.000626 Jy/beam ! Clean residual mean=-0.000002 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 1.66519 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 394 components and 1.66519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065407Jy sigma=0.000600 ! Fit after self-cal, rms=0.065407Jy sigma=0.000600 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065407Jy sigma=0.000600 ! Fit after self-cal, rms=0.065420Jy sigma=0.000600 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=12.99 mas, bpa=48.7 degrees ! Estimated noise=3777.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11448 Jy ! Component: 100 - total flux cleaned = 1.38753 Jy ! Component: 150 - total flux cleaned = 1.50353 Jy ! Component: 200 - total flux cleaned = 1.55966 Jy ! Total flux subtracted in 200 components = 1.55966 Jy ! Clean residual min=-0.021879 max=0.027432 Jy/beam ! Clean residual mean=-0.000058 rms=0.007945 Jy/beam ! Combined flux in latest and established models = 1.55966 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 1.55966 Jy ! Inverting map and beam ! Estimated beam: bmin=4.73 mas, bmaj=11.84 mas, bpa=49.36 degrees ! Estimated noise=2204.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399843 Jy ! Component: 100 - total flux cleaned = 0.0509542 Jy ! Component: 150 - total flux cleaned = 0.0585826 Jy ! Component: 200 - total flux cleaned = 0.0608137 Jy ! Total flux subtracted in 200 components = 0.0608137 Jy ! Clean residual min=-0.006236 max=0.006166 Jy/beam ! Clean residual mean=-0.000014 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 1.62047 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 87 components and 1.62047 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.387 mas, bmaj=13.65 mas, bpa=62.9 degrees ! Estimated noise=2456.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128615 Jy ! Component: 100 - total flux cleaned = -0.00306301 Jy ! Component: 150 - total flux cleaned = -0.00444061 Jy ! Component: 200 - total flux cleaned = -0.00600418 Jy ! Total flux subtracted in 200 components = -0.00600418 Jy ! Clean residual min=-0.002501 max=0.002473 Jy/beam ! Clean residual mean=-0.000027 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 1.61447 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159263 Jy ! Component: 100 - total flux cleaned = -0.00309907 Jy ! Component: 150 - total flux cleaned = -0.00441499 Jy ! Component: 200 - total flux cleaned = -0.005686 Jy ! Total flux subtracted in 200 components = -0.005686 Jy ! Clean residual min=-0.002091 max=0.002110 Jy/beam ! Clean residual mean=-0.000024 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 1.60878 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 154 components and 1.60878 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.73 mas, bmaj=11.84 mas, bpa=49.36 degrees ! Estimated noise=2204.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231635 Jy ! Component: 100 - total flux cleaned = -0.000384514 Jy ! Component: 150 - total flux cleaned = -0.00105334 Jy ! Component: 200 - total flux cleaned = -0.00129827 Jy ! Total flux subtracted in 200 components = -0.00129827 Jy ! Clean residual min=-0.001909 max=0.001890 Jy/beam ! Clean residual mean=-0.000002 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 1.60748 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 204 components and 1.60748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066308Jy sigma=0.000606 ! Fit after self-cal, rms=0.066300Jy sigma=0.000605 wmodel J0102+5824_S_2017_06_10_pus_map.mod ! Writing 204 model components to file: J0102+5824_S_2017_06_10_pus_map.mod wobs J0102+5824_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0102+5824_S_2017_06_10_pus_uvs.fits wwins J0102+5824_S_2017_06_10_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0102+5824_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.73 x 11.84 at 49.36 degrees (North through East) ! Clean map min=-0.0065637 max=1.4171 Jy/beam ! Writing clean map to FITS file: J0102+5824_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.41711 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000718353 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152074 0.152074 0.304148 0.608296 1.21659 2.43318 4.86637 9.73274 19.4655 38.931 77.8619 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.417 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.73 x 11.84 at 49.36 degrees (North through East) ! Clean map min=-0.0065637 max=1.4171 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0102+5824_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:42 2019