! Started logfile: J0102+5824_S_2017_02_19_pus_uvs.log on Sat May 4 18:39:22 2019 obs J0102+5824_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0102+5824_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.408333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0102+5824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0102+5824_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.141776Jy sigma=0.007938 ! Fit after self-cal, rms=1.132606Jy sigma=0.007857 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=13.54 mas, bpa=77.59 degrees ! Estimated noise=5784.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60372 Jy ! Component: 100 - total flux cleaned = 1.95358 Jy ! Total flux subtracted in 100 components = 1.95358 Jy ! Clean residual min=-0.107638 max=0.117799 Jy/beam ! Clean residual mean=0.000336 rms=0.028317 Jy/beam ! Combined flux in latest and established models = 1.95358 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.95358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326738Jy sigma=0.001977 ! Fit after self-cal, rms=0.326734Jy sigma=0.001977 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=13.98 mas, bpa=77.16 degrees ! Estimated noise=4439.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108374 Jy ! Component: 100 - total flux cleaned = 0.163096 Jy ! Component: 150 - total flux cleaned = 0.199403 Jy ! Component: 200 - total flux cleaned = 0.226248 Jy ! Total flux subtracted in 200 components = 0.226248 Jy ! Clean residual min=-0.071975 max=0.071908 Jy/beam ! Clean residual mean=0.000163 rms=0.018159 Jy/beam ! Combined flux in latest and established models = 2.17982 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 74 components and 2.17983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272998Jy sigma=0.001747 ! Fit after self-cal, rms=0.272977Jy sigma=0.001747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.01 KP 1.09 ! LA 1.04 MK 1.00* NL 0.87 OV 1.07 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.04 KP 0.91 ! LA 1.01 MK 1.00* NL 1.01 OV 1.12 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.01 KP 0.89 ! LA 0.79 MK 1.00* NL 1.14 OV 1.02 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.95 KP 1.00* ! LA 0.86 MK 1.00* NL 1.00* OV 1.09 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.272977Jy sigma=0.001747 ! Fit after self-cal, rms=0.095311Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.71 mas, bmaj=14.05 mas, bpa=77.03 degrees ! Estimated noise=4421.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133929 Jy ! Component: 100 - total flux cleaned = 0.0131864 Jy ! Component: 150 - total flux cleaned = 0.0127438 Jy ! Component: 200 - total flux cleaned = 0.0125596 Jy ! Total flux subtracted in 200 components = 0.0125596 Jy ! Clean residual min=-0.010229 max=0.011008 Jy/beam ! Clean residual mean=-0.000007 rms=0.002959 Jy/beam ! Combined flux in latest and established models = 2.19238 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 2.19238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092946Jy sigma=0.000662 ! Fit after self-cal, rms=0.092876Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092876Jy sigma=0.000662 ! Fit after self-cal, rms=0.092651Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=14.04 mas, bpa=77.03 degrees ! Estimated noise=4416.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504408 Jy ! Component: 100 - total flux cleaned = 0.00528875 Jy ! Component: 150 - total flux cleaned = 0.00500296 Jy ! Component: 200 - total flux cleaned = 0.00494466 Jy ! Total flux subtracted in 200 components = 0.00494466 Jy ! Clean residual min=-0.009503 max=0.010387 Jy/beam ! Clean residual mean=-0.000008 rms=0.002743 Jy/beam ! Combined flux in latest and established models = 2.19733 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 2.19733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092385Jy sigma=0.000657 ! Fit after self-cal, rms=0.092384Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231233 Jy ! Component: 100 - total flux cleaned = -0.000280198 Jy ! Component: 150 - total flux cleaned = -0.000371561 Jy ! Component: 200 - total flux cleaned = -0.00045633 Jy ! Total flux subtracted in 200 components = -0.00045633 Jy ! Clean residual min=-0.009640 max=0.010253 Jy/beam ! Clean residual mean=-0.000008 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 2.19687 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 2.19687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092347Jy sigma=0.000657 ! Fit after self-cal, rms=0.092347Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092347Jy sigma=0.000657 ! Fit after self-cal, rms=0.092323Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=14.04 mas, bpa=77.03 degrees ! Estimated noise=4414.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106506 Jy ! Component: 100 - total flux cleaned = 0.000986492 Jy ! Component: 150 - total flux cleaned = 0.000922271 Jy ! Component: 200 - total flux cleaned = 0.000862706 Jy ! Total flux subtracted in 200 components = 0.000862706 Jy ! Clean residual min=-0.009935 max=0.010068 Jy/beam ! Clean residual mean=-0.000008 rms=0.002706 Jy/beam ! Combined flux in latest and established models = 2.19773 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 2.19774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092290Jy sigma=0.000657 ! Fit after self-cal, rms=0.092291Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.51836e-05 Jy ! Component: 100 - total flux cleaned = -0.000140147 Jy ! Component: 150 - total flux cleaned = -0.000192797 Jy ! Component: 200 - total flux cleaned = -0.000268759 Jy ! Total flux subtracted in 200 components = -0.000268759 Jy ! Clean residual min=-0.009950 max=0.010039 Jy/beam ! Clean residual mean=-0.000007 rms=0.002700 Jy/beam ! Combined flux in latest and established models = 2.19747 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 130 components and 2.19747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092277Jy sigma=0.000656 ! Fit after self-cal, rms=0.092278Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092278Jy sigma=0.000656 ! Fit after self-cal, rms=0.092272Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.872 mas, bmaj=15.42 mas, bpa=69.66 degrees ! Estimated noise=5501.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131767 Jy ! Component: 100 - total flux cleaned = -0.00115336 Jy ! Component: 150 - total flux cleaned = -0.00114486 Jy ! Component: 200 - total flux cleaned = -0.00124901 Jy ! Total flux subtracted in 200 components = -0.00124901 Jy ! Clean residual min=-0.011857 max=0.011238 Jy/beam ! Clean residual mean=-0.000012 rms=0.003552 Jy/beam ! Combined flux in latest and established models = 2.19622 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 142 components and 2.19622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092321Jy sigma=0.000657 ! Fit after self-cal, rms=0.092309Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.31947e-05 Jy ! Component: 100 - total flux cleaned = 5.15337e-05 Jy ! Component: 150 - total flux cleaned = 5.12029e-05 Jy ! Component: 200 - total flux cleaned = 5.13779e-05 Jy ! Total flux subtracted in 200 components = 5.13779e-05 Jy ! Clean residual min=-0.011672 max=0.011211 Jy/beam ! Clean residual mean=-0.000012 rms=0.003498 Jy/beam ! Combined flux in latest and established models = 2.19627 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 147 components and 2.19627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092323Jy sigma=0.000657 ! Fit after self-cal, rms=0.092322Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=14.04 mas, bpa=77.04 degrees ! Estimated noise=4414.69 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.706 x 14.04 at 77.04 degrees (North through East) ! Clean map min=-0.0092562 max=2.046 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092322Jy sigma=0.000657 ! Fit after self-cal, rms=0.082986Jy sigma=0.000589 ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=14.05 mas, bpa=77.03 degrees ! Estimated noise=4415.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182107 Jy ! Component: 100 - total flux cleaned = 0.00186172 Jy ! Component: 150 - total flux cleaned = 0.00189407 Jy ! Component: 200 - total flux cleaned = 0.00186215 Jy ! Total flux subtracted in 200 components = 0.00186215 Jy ! Clean residual min=-0.009469 max=0.010319 Jy/beam ! Clean residual mean=-0.000007 rms=0.002675 Jy/beam ! Combined flux in latest and established models = 2.19813 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 150 components and 2.19813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082930Jy sigma=0.000589 ! Fit after self-cal, rms=0.082932Jy sigma=0.000589 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10039e-05 Jy ! Component: 100 - total flux cleaned = 4.54179e-05 Jy ! Component: 150 - total flux cleaned = 4.59085e-05 Jy ! Component: 200 - total flux cleaned = 4.64764e-05 Jy ! Total flux subtracted in 200 components = 4.64764e-05 Jy ! Clean residual min=-0.009437 max=0.010146 Jy/beam ! Clean residual mean=-0.000007 rms=0.002675 Jy/beam ! Combined flux in latest and established models = 2.19818 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 153 components and 2.19818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082912Jy sigma=0.000588 ! Fit after self-cal, rms=0.082915Jy sigma=0.000588 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082915Jy sigma=0.000588 ! Fit after self-cal, rms=0.082920Jy sigma=0.000588 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=13.62 mas, bpa=77.46 degrees ! Estimated noise=5726.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57947 Jy ! Component: 100 - total flux cleaned = 1.92407 Jy ! Component: 150 - total flux cleaned = 2.02511 Jy ! Component: 200 - total flux cleaned = 2.07403 Jy ! Total flux subtracted in 200 components = 2.07403 Jy ! Clean residual min=-0.022513 max=0.026249 Jy/beam ! Clean residual mean=0.000097 rms=0.007528 Jy/beam ! Combined flux in latest and established models = 2.07403 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 2.07403 Jy ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=14.05 mas, bpa=77.03 degrees ! Estimated noise=4415.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371176 Jy ! Component: 100 - total flux cleaned = 0.0601527 Jy ! Component: 150 - total flux cleaned = 0.0755811 Jy ! Component: 200 - total flux cleaned = 0.0868752 Jy ! Total flux subtracted in 200 components = 0.0868752 Jy ! Clean residual min=-0.013321 max=0.010308 Jy/beam ! Clean residual mean=0.000022 rms=0.003650 Jy/beam ! Combined flux in latest and established models = 2.1609 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 102 components and 2.1609 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.871 mas, bmaj=15.43 mas, bpa=69.65 degrees ! Estimated noise=5503.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142546 Jy ! Component: 100 - total flux cleaned = 0.0230778 Jy ! Component: 150 - total flux cleaned = 0.0288474 Jy ! Component: 200 - total flux cleaned = 0.0326906 Jy ! Total flux subtracted in 200 components = 0.0326906 Jy ! Clean residual min=-0.013113 max=0.010700 Jy/beam ! Clean residual mean=-0.000004 rms=0.003637 Jy/beam ! Combined flux in latest and established models = 2.19359 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257385 Jy ! Component: 100 - total flux cleaned = 0.00394922 Jy ! Component: 150 - total flux cleaned = 0.00437181 Jy ! Component: 200 - total flux cleaned = 0.00454116 Jy ! Total flux subtracted in 200 components = 0.00454116 Jy ! Clean residual min=-0.012458 max=0.011130 Jy/beam ! Clean residual mean=-0.000010 rms=0.003534 Jy/beam ! Combined flux in latest and established models = 2.19813 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 149 components and 2.19813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=14.05 mas, bpa=77.03 degrees ! Estimated noise=4415.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075291 Jy ! Component: 100 - total flux cleaned = 0.00157822 Jy ! Component: 150 - total flux cleaned = 0.00189369 Jy ! Component: 200 - total flux cleaned = 0.00213656 Jy ! Total flux subtracted in 200 components = 0.00213656 Jy ! Clean residual min=-0.010853 max=0.010527 Jy/beam ! Clean residual mean=-0.000007 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 2.20027 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 165 components and 2.20027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083054Jy sigma=0.000590 ! Fit after self-cal, rms=0.083052Jy sigma=0.000590 wmodel J0102+5824_S_2017_02_19_pus_map.mod ! Writing 165 model components to file: J0102+5824_S_2017_02_19_pus_map.mod wobs J0102+5824_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0102+5824_S_2017_02_19_pus_uvs.fits wwins J0102+5824_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0102+5824_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277855 Jy ! Component: 100 - total flux cleaned = -0.00149264 Jy ! Component: 150 - total flux cleaned = -0.00286539 Jy ! Component: 200 - total flux cleaned = -0.00300441 Jy ! Component: 250 - total flux cleaned = -0.00266864 Jy ! Component: 300 - total flux cleaned = -0.00277166 Jy ! Component: 350 - total flux cleaned = -0.00277055 Jy ! Component: 400 - total flux cleaned = -0.00213757 Jy ! Component: 450 - total flux cleaned = -0.00153695 Jy ! Component: 500 - total flux cleaned = -0.000884843 Jy ! Component: 550 - total flux cleaned = -0.00041958 Jy ! Component: 600 - total flux cleaned = 2.48787e-05 Jy ! Component: 650 - total flux cleaned = 0.000311578 Jy ! Component: 700 - total flux cleaned = 0.000727432 Jy ! Component: 750 - total flux cleaned = 0.000992682 Jy ! Component: 800 - total flux cleaned = 0.0013795 Jy ! Component: 850 - total flux cleaned = 0.00156614 Jy ! Component: 900 - total flux cleaned = 0.00162676 Jy ! Component: 950 - total flux cleaned = 0.00162718 Jy ! Component: 1000 - total flux cleaned = 0.00185853 Jy ! Component: 1050 - total flux cleaned = 0.0020819 Jy ! Component: 1100 - total flux cleaned = 0.00218974 Jy ! Component: 1150 - total flux cleaned = 0.00240394 Jy ! Component: 1200 - total flux cleaned = 0.00256118 Jy ! Component: 1250 - total flux cleaned = 0.00281808 Jy ! Component: 1300 - total flux cleaned = 0.00291835 Jy ! Component: 1350 - total flux cleaned = 0.00316639 Jy ! Component: 1400 - total flux cleaned = 0.00340797 Jy ! Component: 1450 - total flux cleaned = 0.00355002 Jy ! Component: 1500 - total flux cleaned = 0.00383048 Jy ! Component: 1550 - total flux cleaned = 0.00410657 Jy ! Component: 1600 - total flux cleaned = 0.00428783 Jy ! Component: 1650 - total flux cleaned = 0.00460002 Jy ! Component: 1700 - total flux cleaned = 0.0047318 Jy ! Component: 1750 - total flux cleaned = 0.00499299 Jy ! Component: 1800 - total flux cleaned = 0.00529323 Jy ! Component: 1850 - total flux cleaned = 0.00550553 Jy ! Component: 1900 - total flux cleaned = 0.00584208 Jy ! Component: 1950 - total flux cleaned = 0.00609184 Jy ! Component: 2000 - total flux cleaned = 0.00638095 Jy ! Component: 2050 - total flux cleaned = 0.00654504 Jy ! Component: 2100 - total flux cleaned = 0.00678962 Jy ! Component: 2150 - total flux cleaned = 0.00703246 Jy ! Component: 2200 - total flux cleaned = 0.00715347 Jy ! Component: 2250 - total flux cleaned = 0.00731418 Jy ! Component: 2300 - total flux cleaned = 0.00759418 Jy ! Component: 2350 - total flux cleaned = 0.00787348 Jy ! Component: 2400 - total flux cleaned = 0.00807219 Jy ! Component: 2450 - total flux cleaned = 0.00823092 Jy ! Component: 2500 - total flux cleaned = 0.00838881 Jy ! Component: 2550 - total flux cleaned = 0.00846767 Jy ! Component: 2600 - total flux cleaned = 0.00862548 Jy ! Component: 2650 - total flux cleaned = 0.00882247 Jy ! Component: 2700 - total flux cleaned = 0.00898025 Jy ! Component: 2750 - total flux cleaned = 0.00909837 Jy ! Component: 2800 - total flux cleaned = 0.00913831 Jy ! Component: 2850 - total flux cleaned = 0.00913875 Jy ! Component: 2900 - total flux cleaned = 0.00921777 Jy ! Component: 2950 - total flux cleaned = 0.00929736 Jy ! Component: 3000 - total flux cleaned = 0.00933702 Jy ! Component: 3050 - total flux cleaned = 0.00933715 Jy ! Component: 3100 - total flux cleaned = 0.00941746 Jy ! Component: 3150 - total flux cleaned = 0.00933727 Jy ! Component: 3200 - total flux cleaned = 0.00925613 Jy ! Component: 3250 - total flux cleaned = 0.00913337 Jy ! Component: 3300 - total flux cleaned = 0.00905078 Jy ! Component: 3350 - total flux cleaned = 0.0089263 Jy ! Component: 3400 - total flux cleaned = 0.00884265 Jy ! Component: 3450 - total flux cleaned = 0.00884247 Jy ! Component: 3500 - total flux cleaned = 0.00880032 Jy ! Component: 3550 - total flux cleaned = 0.00862859 Jy ! Component: 3600 - total flux cleaned = 0.00862806 Jy ! Component: 3650 - total flux cleaned = 0.0086279 Jy ! Component: 3700 - total flux cleaned = 0.00862748 Jy ! Component: 3750 - total flux cleaned = 0.00862735 Jy ! Component: 3800 - total flux cleaned = 0.00862721 Jy ! Component: 3850 - total flux cleaned = 0.00867337 Jy ! Component: 3900 - total flux cleaned = 0.00867323 Jy ! Component: 3950 - total flux cleaned = 0.00872122 Jy ! Component: 4000 - total flux cleaned = 0.00872165 Jy ! Component: 4050 - total flux cleaned = 0.00872139 Jy ! Total flux subtracted in 4096 components = 0.00876995 Jy ! Clean residual min=-0.002656 max=0.002681 Jy/beam ! Clean residual mean=0.000013 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 2.20904 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 416 components and 2.20904 Jy ![Exited script file: muppet] wmap "J0102+5824_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 14.05 at 77.03 degrees (North through East) ! Clean map min=-0.0041967 max=2.043 Jy/beam ! Writing clean map to FITS file: J0102+5824_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.04304 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000789129 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.115876 0.115876 0.231751 0.463502 0.927005 1.85401 3.70802 7.41604 14.8321 29.6642 59.3283 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 14.05 at 77.03 degrees (North through East) ! Clean map min=-0.0041967 max=2.043 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0102+5824_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:39:26 2019