! Started logfile: J0101+5004_X_2017_05_01_pus_uvs.log on Wed May 1 19:50:31 2019 obs J0101+5004_X_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0101+5004_X_2017_05_01_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.87964 visibilities/baseline/integration-bin. ! Found source: J0101+5004 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 863 lines of history. ! ! Reading 82176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0101+5004_X_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995316Jy sigma=0.008392 ! Fit after self-cal, rms=0.961804Jy sigma=0.008142 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9012 mas, bmaj=1.225 mas, bpa=30.32 degrees ! Estimated noise=918.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314492 Jy ! Component: 100 - total flux cleaned = 0.0391358 Jy ! Total flux subtracted in 100 components = 0.0391358 Jy ! Clean residual min=-0.002732 max=0.003589 Jy/beam ! Clean residual mean=-0.000015 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0391358 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0391358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084872Jy sigma=0.000630 ! Fit after self-cal, rms=0.083739Jy sigma=0.000621 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514272 Jy ! Component: 100 - total flux cleaned = 0.00617719 Jy ! Total flux subtracted in 100 components = 0.00617719 Jy ! Clean residual min=-0.002852 max=0.003015 Jy/beam ! Clean residual mean=-0.000008 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0453129 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.0453129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083412Jy sigma=0.000619 ! Fit after self-cal, rms=0.083379Jy sigma=0.000619 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.132 mas, bmaj=1.604 mas, bpa=28.24 degrees ! Estimated noise=307.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192788 Jy ! Component: 100 - total flux cleaned = 0.00193141 Jy ! Component: 150 - total flux cleaned = 0.00193467 Jy ! Component: 200 - total flux cleaned = 0.00187327 Jy ! Total flux subtracted in 200 components = 0.00187327 Jy ! Clean residual min=-0.001302 max=0.002021 Jy/beam ! Clean residual mean=-0.000013 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0471862 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.0471862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083300Jy sigma=0.000618 ! Fit after self-cal, rms=0.083274Jy sigma=0.000618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 0.94 ! LA 0.96 MK 0.97 NL 1.14 OV 1.06 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.09 KP 0.99 ! LA 0.96 MK 0.92 NL 1.10 OV 1.05 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.02 KP 1.00 ! LA 0.98 MK 1.00 NL 1.11 OV 1.09 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.05 KP 0.96 ! LA 0.96 MK 1.03 NL 1.09 OV 1.15 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.92 KP 1.02 ! LA 0.94 MK 1.04 NL 1.07 OV 1.07 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 0.91 KP 0.99 ! LA 1.02 MK 0.97 NL 1.16 OV 1.08 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.93 KP 0.97 ! LA 1.03 MK 1.13 NL 1.11 OV 1.05 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 8. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.97 KP 0.91 ! LA 1.01 MK 1.05 NL 1.07 OV 1.12 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.91 KP 0.95 ! LA 0.97 MK 0.93 NL 1.13 OV 1.02 ! PT 1.01 SC 0.89 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.85 KP 0.96 ! LA 0.98 MK 0.85 NL 1.14 OV 1.05 ! PT 0.97 SC 0.84 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.90 KP 0.94 ! LA 1.06 MK 0.89 NL 1.13 OV 1.07 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.83 HN 0.78 KP 0.86 ! LA 1.00 MK 0.84 NL 1.00 OV 0.96 ! PT 0.97 SC 1.00 ! ! ! Fit before self-cal, rms=0.083274Jy sigma=0.000618 ! Fit after self-cal, rms=0.082611Jy sigma=0.000617 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.122 mas, bmaj=1.581 mas, bpa=28.16 degrees ! Estimated noise=307.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119426 Jy ! Component: 100 - total flux cleaned = 0.00122593 Jy ! Component: 150 - total flux cleaned = 0.00120004 Jy ! Component: 200 - total flux cleaned = 0.00117693 Jy ! Total flux subtracted in 200 components = 0.00117693 Jy ! Clean residual min=-0.001098 max=0.001408 Jy/beam ! Clean residual mean=-0.000009 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0483631 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.0483631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082574Jy sigma=0.000617 ! Fit after self-cal, rms=0.082570Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082570Jy sigma=0.000617 ! Fit after self-cal, rms=0.078642Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.121 mas, bmaj=1.54 mas, bpa=26.7 degrees ! Estimated noise=307.086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468503 Jy ! Component: 100 - total flux cleaned = 0.000537423 Jy ! Component: 150 - total flux cleaned = 0.000598102 Jy ! Component: 200 - total flux cleaned = 0.000643527 Jy ! Total flux subtracted in 200 components = 0.000643527 Jy ! Clean residual min=-0.000788 max=0.001033 Jy/beam ! Clean residual mean=-0.000010 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.0490067 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0490067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078637Jy sigma=0.000616 ! Fit after self-cal, rms=0.078575Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.4, 22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579429 Jy ! Component: 100 - total flux cleaned = 0.000655601 Jy ! Component: 150 - total flux cleaned = 0.000776818 Jy ! Component: 200 - total flux cleaned = 0.000878853 Jy ! Total flux subtracted in 200 components = 0.000878853 Jy ! Clean residual min=-0.000847 max=0.000893 Jy/beam ! Clean residual mean=-0.000011 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0498855 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.0498855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078558Jy sigma=0.000615 ! Fit after self-cal, rms=0.078542Jy sigma=0.000615 ! Inverting map ! Added new window around map position (2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978537 Jy ! Component: 100 - total flux cleaned = 0.00117498 Jy ! Component: 150 - total flux cleaned = 0.00126846 Jy ! Component: 200 - total flux cleaned = 0.0013486 Jy ! Total flux subtracted in 200 components = 0.0013486 Jy ! Clean residual min=-0.000807 max=0.000785 Jy/beam ! Clean residual mean=-0.000008 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.0512341 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.0512341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078524Jy sigma=0.000615 ! Fit after self-cal, rms=0.078520Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078520Jy sigma=0.000615 ! Fit after self-cal, rms=0.078215Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.116 mas, bmaj=1.525 mas, bpa=26.48 degrees ! Estimated noise=307.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750379 Jy ! Component: 100 - total flux cleaned = 0.0010454 Jy ! Component: 150 - total flux cleaned = 0.00123687 Jy ! Component: 200 - total flux cleaned = 0.00139179 Jy ! Total flux subtracted in 200 components = 0.00139179 Jy ! Clean residual min=-0.000730 max=0.000763 Jy/beam ! Clean residual mean=-0.000008 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0526259 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 69 components and 0.0526259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078204Jy sigma=0.000614 ! Fit after self-cal, rms=0.078191Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468513 Jy ! Component: 100 - total flux cleaned = 0.000603767 Jy ! Component: 150 - total flux cleaned = 0.000671878 Jy ! Component: 200 - total flux cleaned = 0.000748792 Jy ! Total flux subtracted in 200 components = 0.000748792 Jy ! Clean residual min=-0.000737 max=0.000748 Jy/beam ! Clean residual mean=-0.000007 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0533747 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.0533747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078182Jy sigma=0.000614 ! Fit after self-cal, rms=0.078180Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078180Jy sigma=0.000614 ! Fit after self-cal, rms=0.078098Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=2.548 mas, bpa=33.5 degrees ! Estimated noise=375.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000797972 Jy ! Component: 100 - total flux cleaned = 0.00127851 Jy ! Component: 150 - total flux cleaned = 0.0016169 Jy ! Component: 200 - total flux cleaned = 0.00174041 Jy ! Total flux subtracted in 200 components = 0.00174041 Jy ! Clean residual min=-0.000752 max=0.000783 Jy/beam ! Clean residual mean=-0.000016 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0551151 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.0551151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078094Jy sigma=0.000614 ! Fit after self-cal, rms=0.078086Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399249 Jy ! Component: 100 - total flux cleaned = 0.000519083 Jy ! Component: 150 - total flux cleaned = 0.000528275 Jy ! Component: 200 - total flux cleaned = 0.000544711 Jy ! Total flux subtracted in 200 components = 0.000544711 Jy ! Clean residual min=-0.000770 max=0.000800 Jy/beam ! Clean residual mean=-0.000014 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0556598 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.0556598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078084Jy sigma=0.000614 ! Fit after self-cal, rms=0.078079Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.515 mas, bpa=26.33 degrees ! Estimated noise=307.688 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.114 x 1.515 at 26.33 degrees (North through East) ! Clean map min=-0.0015473 max=0.041194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8959 mas, bmaj=1.135 mas, bpa=26.31 degrees ! Estimated noise=887.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325902 Jy ! Component: 100 - total flux cleaned = 0.0414861 Jy ! Component: 150 - total flux cleaned = 0.0459161 Jy ! Component: 200 - total flux cleaned = 0.0482627 Jy ! Total flux subtracted in 200 components = 0.0482627 Jy ! Clean residual min=-0.002714 max=0.002490 Jy/beam ! Clean residual mean=-0.000009 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0482627 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0482627 Jy ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.515 mas, bpa=26.33 degrees ! Estimated noise=307.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251612 Jy ! Component: 100 - total flux cleaned = 0.00395568 Jy ! Component: 150 - total flux cleaned = 0.00485165 Jy ! Component: 200 - total flux cleaned = 0.00535981 Jy ! Total flux subtracted in 200 components = 0.00535981 Jy ! Clean residual min=-0.000962 max=0.000866 Jy/beam ! Clean residual mean=-0.000012 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0536225 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 0.0536225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=2.548 mas, bpa=33.5 degrees ! Estimated noise=375.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120602 Jy ! Component: 100 - total flux cleaned = 0.00194815 Jy ! Component: 150 - total flux cleaned = 0.00227064 Jy ! Component: 200 - total flux cleaned = 0.00232217 Jy ! Total flux subtracted in 200 components = 0.00232217 Jy ! Clean residual min=-0.000876 max=0.000831 Jy/beam ! Clean residual mean=-0.000015 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0559447 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.11584e-05 Jy ! Component: 100 - total flux cleaned = 0.000115652 Jy ! Component: 150 - total flux cleaned = 0.000164498 Jy ! Component: 200 - total flux cleaned = 0.000218842 Jy ! Total flux subtracted in 200 components = 0.000218842 Jy ! Clean residual min=-0.000835 max=0.000795 Jy/beam ! Clean residual mean=-0.000014 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0561635 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 71 components and 0.0561635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.114 mas, bmaj=1.515 mas, bpa=26.33 degrees ! Estimated noise=307.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000485421 Jy ! Component: 100 - total flux cleaned = -0.000485282 Jy ! Component: 150 - total flux cleaned = -0.00048621 Jy ! Component: 200 - total flux cleaned = -0.000421871 Jy ! Total flux subtracted in 200 components = -0.000421871 Jy ! Clean residual min=-0.000783 max=0.000782 Jy/beam ! Clean residual mean=-0.000006 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0557416 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.0557416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078097Jy sigma=0.000614 ! Fit after self-cal, rms=0.078109Jy sigma=0.000614 wmodel J0101+5004_X_2017_05_01_pus_map.mod ! Writing 83 model components to file: J0101+5004_X_2017_05_01_pus_map.mod wobs J0101+5004_X_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0101+5004_X_2017_05_01_pus_uvs.fits wwins J0101+5004_X_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0101+5004_X_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104869 Jy ! Component: 100 - total flux cleaned = -0.000104542 Jy ! Component: 150 - total flux cleaned = -0.000129297 Jy ! Component: 200 - total flux cleaned = -0.000141442 Jy ! Component: 250 - total flux cleaned = -0.000188632 Jy ! Component: 300 - total flux cleaned = -0.000257315 Jy ! Component: 350 - total flux cleaned = -0.000290824 Jy ! Component: 400 - total flux cleaned = -0.000367333 Jy ! Component: 450 - total flux cleaned = -0.000377927 Jy ! Component: 500 - total flux cleaned = -0.000409298 Jy ! Component: 550 - total flux cleaned = -0.000450426 Jy ! Component: 600 - total flux cleaned = -0.000500835 Jy ! Component: 650 - total flux cleaned = -0.000550311 Jy ! Component: 700 - total flux cleaned = -0.000579646 Jy ! Component: 750 - total flux cleaned = -0.000618057 Jy ! Component: 800 - total flux cleaned = -0.000674705 Jy ! Component: 850 - total flux cleaned = -0.000711873 Jy ! Component: 900 - total flux cleaned = -0.000739316 Jy ! Component: 950 - total flux cleaned = -0.000775518 Jy ! Component: 1000 - total flux cleaned = -0.000793418 Jy ! Component: 1050 - total flux cleaned = -0.000819786 Jy ! Component: 1100 - total flux cleaned = -0.000837203 Jy ! Component: 1150 - total flux cleaned = -0.00084586 Jy ! Component: 1200 - total flux cleaned = -0.000879934 Jy ! Component: 1250 - total flux cleaned = -0.000896754 Jy ! Component: 1300 - total flux cleaned = -0.000905211 Jy ! Component: 1350 - total flux cleaned = -0.000913399 Jy ! Component: 1400 - total flux cleaned = -0.000905308 Jy ! Component: 1450 - total flux cleaned = -0.000913376 Jy ! Component: 1500 - total flux cleaned = -0.00090542 Jy ! Component: 1550 - total flux cleaned = -0.000897488 Jy ! Component: 1600 - total flux cleaned = -0.000881904 Jy ! Component: 1650 - total flux cleaned = -0.000858739 Jy ! Component: 1700 - total flux cleaned = -0.000835883 Jy ! Component: 1750 - total flux cleaned = -0.000820908 Jy ! Component: 1800 - total flux cleaned = -0.000798481 Jy ! Component: 1850 - total flux cleaned = -0.000791101 Jy ! Component: 1900 - total flux cleaned = -0.000783822 Jy ! Component: 1950 - total flux cleaned = -0.000762104 Jy ! Component: 2000 - total flux cleaned = -0.00074777 Jy ! Total flux subtracted in 2048 components = -0.000747874 Jy ! Clean residual min=-0.000488 max=0.000418 Jy/beam ! Clean residual mean=-0.000004 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0549938 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 221 components and 0.0549938 Jy ![Exited script file: muppet] wmap "J0101+5004_X_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.114 x 1.515 at 26.33 degrees (North through East) ! Clean map min=-0.0015454 max=0.040797 Jy/beam ! Writing clean map to FITS file: J0101+5004_X_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0407975 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132936 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.977528 0.977528 1.95506 3.91011 7.82023 15.6405 31.2809 62.5618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.114 x 1.515 at 26.33 degrees (North through East) ! Clean map min=-0.0015454 max=0.040797 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0101+5004_X_2017_05_01_pus_uvs.log closed on Wed May 1 19:50:35 2019