! Started logfile: J0101+1639_X_2017_05_31_pus_uvs.log on Tue Feb  5 10:42:41 2019
obs J0101+1639_X_2017_05_31_pus_uva.fits
! Reading UV FITS file: J0101+1639_X_2017_05_31_pus_uva.fits
! AN table 1: 224 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.980754 visibilities/baseline/integration-bin.
! Found source: J0101+1639
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1698 lines of history.
! 
! Reading 118632 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0101+1639_X_2017_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.965462Jy  sigma=0.008333
! Fit after  self-cal, rms=0.946738Jy  sigma=0.008178
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.6999 mas, bmaj=1.671 mas, bpa=-1.706 degrees
! Estimated noise=434.954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0401264 Jy
! Component: 100  -  total flux cleaned = 0.0529028 Jy
! Total flux subtracted in 100 components = 0.0529028 Jy
! Clean residual min=-0.002960 max=0.006963 Jy/beam
! Clean residual mean=-0.000015 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.0529028 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0529028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080733Jy  sigma=0.000674
! Fit after  self-cal, rms=0.080569Jy  sigma=0.000672
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (0.4, -4.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846013 Jy
! Component: 100  -  total flux cleaned = 0.0144222 Jy
! Total flux subtracted in 100 components = 0.0144222 Jy
! Clean residual min=-0.002336 max=0.003431 Jy/beam
! Clean residual mean=-0.000010 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.0673251 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.0673251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079208Jy  sigma=0.000659
! Fit after  self-cal, rms=0.079128Jy  sigma=0.000659
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564917 Jy
! Component: 100  -  total flux cleaned = 0.00974104 Jy
! Total flux subtracted in 100 components = 0.00974104 Jy
! Clean residual min=-0.002083 max=0.002540 Jy/beam
! Clean residual mean=-0.000007 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.0770661 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.0770661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078482Jy  sigma=0.000653
! Fit after  self-cal, rms=0.078436Jy  sigma=0.000652
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390267 Jy
! Component: 100  -  total flux cleaned = 0.00686771 Jy
! Total flux subtracted in 100 components = 0.00686771 Jy
! Clean residual min=-0.001883 max=0.002169 Jy/beam
! Clean residual mean=-0.000005 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0839338 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 43 components and 0.0839338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078106Jy  sigma=0.000649
! Fit after  self-cal, rms=0.078081Jy  sigma=0.000649
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8699 mas, bmaj=1.939 mas, bpa=-0.7132 degrees
! Estimated noise=239.651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450405 Jy
! Component: 100  -  total flux cleaned = 0.00749495 Jy
! Component: 150  -  total flux cleaned = 0.00970171 Jy
! Component: 200  -  total flux cleaned = 0.0113964 Jy
! Total flux subtracted in 200 components = 0.0113964 Jy
! Clean residual min=-0.001467 max=0.001791 Jy/beam
! Clean residual mean=-0.000008 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0953303 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 65 components and 0.0953303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077772Jy  sigma=0.000646
! Fit after  self-cal, rms=0.077721Jy  sigma=0.000645
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.05     NL        1.01     OV        1.04     
!   PT        0.93     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        0.91     
!   LA        0.94     MK        1.04     NL        0.98     OV        1.04     
!   PT        1.05     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.04     KP        0.88     
!   LA        0.97     MK        1.06     NL        1.00     OV        1.06     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.00     KP        0.97     
!   LA        0.95     MK        1.05     NL        0.99     OV        1.11     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.95     KP        0.97     
!   LA        0.95     MK        1.12     NL        0.91     OV        1.10     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.99     KP        0.95     
!   LA        0.98     MK        1.04     NL        0.86     OV        0.99     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.05     KP        0.96     
!   LA        0.98     MK        1.06     NL        0.91     OV        0.99     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.07     KP        0.94     
!   LA        0.94     MK        1.04     NL        0.89     OV        1.01     
!   PT        0.99     SC        1.13     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.06     KP        0.97     
!   LA        0.98     MK        1.01     NL        0.89     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.06     KP        0.97     
!   LA        0.98     MK        1.04     NL        0.87     OV        1.04     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.98     KP        0.90     
!   LA        0.99     MK        1.02     NL        0.90     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.98     KP        0.93     
!   LA        1.02     MK        1.00     NL        0.94     OV        1.03     
!   PT        0.99     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.077721Jy  sigma=0.000645
! Fit after  self-cal, rms=0.077173Jy  sigma=0.000644
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8854 mas, bmaj=1.96 mas, bpa=-0.8735 degrees
! Estimated noise=238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211647 Jy
! Component: 100  -  total flux cleaned = 0.00357956 Jy
! Component: 150  -  total flux cleaned = 0.00453214 Jy
! Component: 200  -  total flux cleaned = 0.00520618 Jy
! Total flux subtracted in 200 components = 0.00520618 Jy
! Clean residual min=-0.001148 max=0.001333 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.100536 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 85 components and 0.100536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077102Jy  sigma=0.000644
! Fit after  self-cal, rms=0.077108Jy  sigma=0.000643
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-0.8, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133634 Jy
! Component: 100  -  total flux cleaned = 0.00203827 Jy
! Component: 150  -  total flux cleaned = 0.002628 Jy
! Component: 200  -  total flux cleaned = 0.00313872 Jy
! Total flux subtracted in 200 components = 0.00313872 Jy
! Clean residual min=-0.000970 max=0.001201 Jy/beam
! Clean residual mean=0.000000 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.103675 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 99 components and 0.103675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077071Jy  sigma=0.000643
! Fit after  self-cal, rms=0.077064Jy  sigma=0.000643
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (-9.8, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116634 Jy
! Component: 100  -  total flux cleaned = 0.00160912 Jy
! Component: 150  -  total flux cleaned = 0.00201646 Jy
! Component: 200  -  total flux cleaned = 0.00232959 Jy
! Total flux subtracted in 200 components = 0.00232959 Jy
! Clean residual min=-0.000904 max=0.000971 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.106005 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 110 components and 0.106005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077039Jy  sigma=0.000643
! Fit after  self-cal, rms=0.077030Jy  sigma=0.000643
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077030Jy  sigma=0.000643
! Fit after  self-cal, rms=0.076774Jy  sigma=0.000642
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8845 mas, bmaj=1.94 mas, bpa=-0.6141 degrees
! Estimated noise=236.467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632166 Jy
! Component: 100  -  total flux cleaned = 0.0010229 Jy
! Component: 150  -  total flux cleaned = 0.00125554 Jy
! Component: 200  -  total flux cleaned = 0.0015184 Jy
! Total flux subtracted in 200 components = 0.0015184 Jy
! Clean residual min=-0.000797 max=0.000960 Jy/beam
! Clean residual mean=-0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.107523 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.107523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076757Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076770Jy  sigma=0.000642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000930231 Jy
! Component: 100  -  total flux cleaned = 0.00138904 Jy
! Component: 150  -  total flux cleaned = 0.00167082 Jy
! Component: 200  -  total flux cleaned = 0.00186106 Jy
! Total flux subtracted in 200 components = 0.00186106 Jy
! Clean residual min=-0.000723 max=0.000694 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.109384 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 137 components and 0.109384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076754Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076751Jy  sigma=0.000642
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076751Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076444Jy  sigma=0.000642
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8827 mas, bmaj=1.929 mas, bpa=-0.523 degrees
! Estimated noise=235.094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382785 Jy
! Component: 100  -  total flux cleaned = 0.000724841 Jy
! Component: 150  -  total flux cleaned = 0.000930792 Jy
! Component: 200  -  total flux cleaned = 0.00109755 Jy
! Total flux subtracted in 200 components = 0.00109755 Jy
! Clean residual min=-0.000657 max=0.000644 Jy/beam
! Clean residual mean=-0.000001 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.110482 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 141 components and 0.110482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076434Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076438Jy  sigma=0.000642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204577 Jy
! Component: 100  -  total flux cleaned = 0.000372753 Jy
! Component: 150  -  total flux cleaned = 0.000524723 Jy
! Component: 200  -  total flux cleaned = 0.000608493 Jy
! Total flux subtracted in 200 components = 0.000608493 Jy
! Clean residual min=-0.000642 max=0.000648 Jy/beam
! Clean residual mean=-0.000001 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.11109 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 149 components and 0.11109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076432Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076430Jy  sigma=0.000642
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076430Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076090Jy  sigma=0.000642
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=2.064 mas, bmaj=2.924 mas, bpa=-4.336 degrees
! Estimated noise=296.623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426013 Jy
! Component: 100  -  total flux cleaned = 0.000683207 Jy
! Component: 150  -  total flux cleaned = 0.000811455 Jy
! Component: 200  -  total flux cleaned = 0.000940414 Jy
! Total flux subtracted in 200 components = 0.000940414 Jy
! Clean residual min=-0.000611 max=0.000784 Jy/beam
! Clean residual mean=-0.000002 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.112031 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 186 components and 0.112031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076087Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076086Jy  sigma=0.000642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120726 Jy
! Component: 100  -  total flux cleaned = 0.000278717 Jy
! Component: 150  -  total flux cleaned = 0.000354188 Jy
! Component: 200  -  total flux cleaned = 0.000413148 Jy
! Total flux subtracted in 200 components = 0.000413148 Jy
! Clean residual min=-0.000612 max=0.000758 Jy/beam
! Clean residual mean=-0.000002 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.112444 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 193 components and 0.112444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076085Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076084Jy  sigma=0.000642
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8811 mas, bmaj=1.921 mas, bpa=-0.4961 degrees
! Estimated noise=233.974 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8811 x 1.921 at -0.4961 degrees (North through East)
! Clean map  min=-0.00055506  max=0.052641 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.7072 mas, bmaj=1.651 mas, bpa=-1.624 degrees
! Estimated noise=424.546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0384074 Jy
! Component: 100  -  total flux cleaned = 0.054292 Jy
! Component: 150  -  total flux cleaned = 0.0647431 Jy
! Component: 200  -  total flux cleaned = 0.0722411 Jy
! Total flux subtracted in 200 components = 0.0722411 Jy
! Clean residual min=-0.002167 max=0.004237 Jy/beam
! Clean residual mean=-0.000009 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0722411 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0722411 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8811 mas, bmaj=1.921 mas, bpa=-0.4961 degrees
! Estimated noise=233.974 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00824694 Jy
! Component: 100  -  total flux cleaned = 0.0137763 Jy
! Component: 150  -  total flux cleaned = 0.0177397 Jy
! Component: 200  -  total flux cleaned = 0.0207522 Jy
! Total flux subtracted in 200 components = 0.0207522 Jy
! Clean residual min=-0.001104 max=0.001808 Jy/beam
! Clean residual mean=-0.000011 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0929934 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 49 components and 0.0929934 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Added new window around map position (1.2, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244854 Jy
! Component: 100  -  total flux cleaned = 0.00451639 Jy
! Component: 150  -  total flux cleaned = 0.00629042 Jy
! Component: 200  -  total flux cleaned = 0.00782176 Jy
! Total flux subtracted in 200 components = 0.00782176 Jy
! Clean residual min=-0.000857 max=0.001156 Jy/beam
! Clean residual mean=-0.000006 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.100815 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 84 components and 0.100815 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=2.064 mas, bmaj=2.924 mas, bpa=-4.336 degrees
! Estimated noise=296.623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232651 Jy
! Component: 100  -  total flux cleaned = 0.00398979 Jy
! Component: 150  -  total flux cleaned = 0.00530076 Jy
! Component: 200  -  total flux cleaned = 0.00637659 Jy
! Total flux subtracted in 200 components = 0.00637659 Jy
! Clean residual min=-0.000834 max=0.001050 Jy/beam
! Clean residual mean=-0.000006 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.107192 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000895095 Jy
! Component: 100  -  total flux cleaned = 0.00164701 Jy
! Component: 150  -  total flux cleaned = 0.00228408 Jy
! Component: 200  -  total flux cleaned = 0.00282662 Jy
! Total flux subtracted in 200 components = 0.00282662 Jy
! Clean residual min=-0.000714 max=0.000781 Jy/beam
! Clean residual mean=-0.000003 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.110018 Jy
! Adding 141 model components to the UV plane model.
! The established model now contains 210 components and 0.110018 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! Estimated beam: bmin=0.8811 mas, bmaj=1.921 mas, bpa=-0.4961 degrees
! Estimated noise=233.974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463462 Jy
! Component: 100  -  total flux cleaned = 0.00087066 Jy
! Component: 150  -  total flux cleaned = 0.00113188 Jy
! Component: 200  -  total flux cleaned = 0.00135026 Jy
! Total flux subtracted in 200 components = 0.00135026 Jy
! Clean residual min=-0.000651 max=0.000738 Jy/beam
! Clean residual mean=-0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.111369 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 231 components and 0.111369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076085Jy  sigma=0.000642
! Fit after  self-cal, rms=0.076071Jy  sigma=0.000642
wmodel J0101+1639_X_2017_05_31_pus_map.mod
! Writing 231 model components to file: J0101+1639_X_2017_05_31_pus_map.mod
wobs J0101+1639_X_2017_05_31_pus_uvs.fits
! Writing UV FITS file: J0101+1639_X_2017_05_31_pus_uvs.fits
wwins J0101+1639_X_2017_05_31_pus_map.win
! wwins: Wrote 7 windows to J0101+1639_X_2017_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.92683e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109581 Jy
! Component: 150  -  total flux cleaned = 0.000149076 Jy
! Component: 200  -  total flux cleaned = 0.000167945 Jy
! Component: 250  -  total flux cleaned = 0.00016782 Jy
! Component: 300  -  total flux cleaned = 0.000185399 Jy
! Component: 350  -  total flux cleaned = 0.00020254 Jy
! Component: 400  -  total flux cleaned = 0.000252371 Jy
! Component: 450  -  total flux cleaned = 0.000276818 Jy
! Component: 500  -  total flux cleaned = 0.000332808 Jy
! Component: 550  -  total flux cleaned = 0.00036419 Jy
! Component: 600  -  total flux cleaned = 0.000425832 Jy
! Component: 650  -  total flux cleaned = 0.000463542 Jy
! Component: 700  -  total flux cleaned = 0.000478395 Jy
! Component: 750  -  total flux cleaned = 0.000507712 Jy
! Component: 800  -  total flux cleaned = 0.000543813 Jy
! Component: 850  -  total flux cleaned = 0.000593592 Jy
! Component: 900  -  total flux cleaned = 0.000621557 Jy
! Component: 950  -  total flux cleaned = 0.000649145 Jy
! Component: 1000  -  total flux cleaned = 0.00066268 Jy
! Component: 1050  -  total flux cleaned = 0.000655913 Jy
! Component: 1100  -  total flux cleaned = 0.000709184 Jy
! Component: 1150  -  total flux cleaned = 0.00070253 Jy
! Component: 1200  -  total flux cleaned = 0.000735043 Jy
! Component: 1250  -  total flux cleaned = 0.000754287 Jy
! Component: 1300  -  total flux cleaned = 0.000754319 Jy
! Component: 1350  -  total flux cleaned = 0.000785902 Jy
! Component: 1400  -  total flux cleaned = 0.000823411 Jy
! Component: 1450  -  total flux cleaned = 0.000829521 Jy
! Component: 1500  -  total flux cleaned = 0.000847904 Jy
! Component: 1550  -  total flux cleaned = 0.000859917 Jy
! Component: 1600  -  total flux cleaned = 0.000877896 Jy
! Component: 1650  -  total flux cleaned = 0.000883805 Jy
! Component: 1700  -  total flux cleaned = 0.000877942 Jy
! Component: 1750  -  total flux cleaned = 0.00089546 Jy
! Component: 1800  -  total flux cleaned = 0.000889735 Jy
! Component: 1850  -  total flux cleaned = 0.000889676 Jy
! Component: 1900  -  total flux cleaned = 0.000884007 Jy
! Component: 1950  -  total flux cleaned = 0.00088969 Jy
! Component: 2000  -  total flux cleaned = 0.000884096 Jy
! Total flux subtracted in 2048 components = 0.000856426 Jy
! Clean residual min=-0.000294 max=0.000372 Jy/beam
! Clean residual mean=-0.000001 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.112225 Jy
keep
! Adding 148 model components to the UV plane model.
! The established model now contains 379 components and 0.112225 Jy
![Exited script file: muppet]
wmap "J0101+1639_X_2017_05_31_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8811 x 1.921 at -0.4961 degrees (North through East)
! Clean map  min=-0.00052312  max=0.051927 Jy/beam
! Writing clean map to FITS file: J0101+1639_X_2017_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0519275 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0607% of the data.
!  The x-axis pixel size should ideally be below 0.1995 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106647 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.616128 0.616128 1.23226 2.46451 4.92902 9.85805 19.7161 39.4322 78.8644
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8811 x 1.921 at -0.4961 degrees (North through East)
! Clean map  min=-0.00052312  max=0.051927 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0101+1639_X_2017_05_31_pus_uvs.log closed on Tue Feb  5 10:42:49 2019