! Started logfile: J0100-3337_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:28:53 2019 obs J0100-3337_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0100-3337_S_2017_03_27_pus_uva.fits ! AN table 1: 118 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.932957 visibilities/baseline/integration-bin. ! Found source: J0100-3337 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 19816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0100-3337_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 524 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900977Jy sigma=0.004709 ! Fit after self-cal, rms=0.876710Jy sigma=0.004596 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=6.505 mas, bpa=-3.341 degrees ! Estimated noise=1743.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101956 Jy ! Component: 100 - total flux cleaned = 0.124189 Jy ! Total flux subtracted in 100 components = 0.124189 Jy ! Clean residual min=-0.006724 max=0.010217 Jy/beam ! Clean residual mean=-0.000031 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.124189 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.124189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147369Jy sigma=0.000673 ! Fit after self-cal, rms=0.147328Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.65 mas, bpa=-4.174 degrees ! Estimated noise=1103.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111356 Jy ! Component: 100 - total flux cleaned = 0.0167761 Jy ! Component: 150 - total flux cleaned = 0.0199183 Jy ! Component: 200 - total flux cleaned = 0.0207589 Jy ! Total flux subtracted in 200 components = 0.0207589 Jy ! Clean residual min=-0.004284 max=0.006773 Jy/beam ! Clean residual mean=-0.000012 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.144948 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.144948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146359Jy sigma=0.000669 ! Fit after self-cal, rms=0.146285Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.38 KP 1.02 ! LA 0.95 MK 1.02 NL 0.91 OV 1.01 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.41 KP 0.97 ! LA 0.96 MK 0.99 NL 1.03 OV 1.26 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.05 HN 1.26 KP 1.00 ! LA 0.93 MK 1.03 NL 0.96 OV 0.96 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 1.48 KP 1.00* ! LA 1.00* MK 0.91 NL 1.00* OV 0.98 ! PT 1.08 SC 0.74 ! ! ! Fit before self-cal, rms=0.146285Jy sigma=0.000668 ! Fit after self-cal, rms=0.154433Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.564 mas, bpa=-3.691 degrees ! Estimated noise=1109.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159407 Jy ! Component: 100 - total flux cleaned = 0.0016533 Jy ! Component: 150 - total flux cleaned = 0.00175931 Jy ! Component: 200 - total flux cleaned = 0.00186083 Jy ! Total flux subtracted in 200 components = 0.00186083 Jy ! Clean residual min=-0.003304 max=0.004216 Jy/beam ! Clean residual mean=0.000018 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.146809 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.146809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154349Jy sigma=0.000663 ! Fit after self-cal, rms=0.154505Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154505Jy sigma=0.000663 ! Fit after self-cal, rms=0.159062Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=7.551 mas, bpa=-3.858 degrees ! Estimated noise=1114.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259133 Jy ! Component: 100 - total flux cleaned = 0.000377438 Jy ! Component: 150 - total flux cleaned = 0.000481716 Jy ! Component: 200 - total flux cleaned = 0.000606499 Jy ! Total flux subtracted in 200 components = 0.000606499 Jy ! Clean residual min=-0.003161 max=0.003250 Jy/beam ! Clean residual mean=0.000006 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.147415 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.147415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159042Jy sigma=0.000661 ! Fit after self-cal, rms=0.159083Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (79.5, 93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289348 Jy ! Component: 100 - total flux cleaned = 0.00339985 Jy ! Component: 150 - total flux cleaned = 0.00355255 Jy ! Component: 200 - total flux cleaned = 0.00371634 Jy ! Total flux subtracted in 200 components = 0.00371634 Jy ! Clean residual min=-0.002909 max=0.002625 Jy/beam ! Clean residual mean=-0.000002 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.151132 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.151132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159033Jy sigma=0.000660 ! Fit after self-cal, rms=0.159023Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159023Jy sigma=0.000660 ! Fit after self-cal, rms=0.161643Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.55 mas, bpa=-3.963 degrees ! Estimated noise=1111.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674216 Jy ! Component: 100 - total flux cleaned = 0.000967957 Jy ! Component: 150 - total flux cleaned = 0.00106678 Jy ! Component: 200 - total flux cleaned = 0.00109593 Jy ! Total flux subtracted in 200 components = 0.00109593 Jy ! Clean residual min=-0.002834 max=0.002569 Jy/beam ! Clean residual mean=-0.000010 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.152228 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.152228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161621Jy sigma=0.000660 ! Fit after self-cal, rms=0.161626Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313814 Jy ! Component: 100 - total flux cleaned = 0.000367669 Jy ! Component: 150 - total flux cleaned = 0.000392903 Jy ! Component: 200 - total flux cleaned = 0.000416872 Jy ! Total flux subtracted in 200 components = 0.000416872 Jy ! Clean residual min=-0.002778 max=0.002552 Jy/beam ! Clean residual mean=-0.000011 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.152645 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.152645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161615Jy sigma=0.000660 ! Fit after self-cal, rms=0.161612Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161612Jy sigma=0.000660 ! Fit after self-cal, rms=0.161892Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=20.9 mas, bpa=2.453 degrees ! Estimated noise=1459.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196862 Jy ! Component: 100 - total flux cleaned = -0.000197988 Jy ! Component: 150 - total flux cleaned = -0.000263925 Jy ! Component: 200 - total flux cleaned = -0.000321191 Jy ! Total flux subtracted in 200 components = -0.000321191 Jy ! Clean residual min=-0.002523 max=0.002648 Jy/beam ! Clean residual mean=-0.000025 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.152323 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.152323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161891Jy sigma=0.000660 ! Fit after self-cal, rms=0.161900Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.63684e-05 Jy ! Component: 100 - total flux cleaned = -7.53729e-05 Jy ! Component: 150 - total flux cleaned = -0.000127446 Jy ! Component: 200 - total flux cleaned = -0.000163607 Jy ! Total flux subtracted in 200 components = -0.000163607 Jy ! Clean residual min=-0.002552 max=0.002627 Jy/beam ! Clean residual mean=-0.000026 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.15216 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 116 components and 0.15216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161900Jy sigma=0.000660 ! Fit after self-cal, rms=0.161902Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.55 mas, bpa=-4.03 degrees ! Estimated noise=1109.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 7.55 at -4.03 degrees (North through East) ! Clean map min=-0.0026875 max=0.12933 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=6.364 mas, bpa=-3.198 degrees ! Estimated noise=1777.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10374 Jy ! Component: 100 - total flux cleaned = 0.12637 Jy ! Component: 150 - total flux cleaned = 0.133383 Jy ! Component: 200 - total flux cleaned = 0.13791 Jy ! Total flux subtracted in 200 components = 0.13791 Jy ! Clean residual min=-0.004659 max=0.004008 Jy/beam ! Clean residual mean=-0.000015 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.13791 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.13791 Jy ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.55 mas, bpa=-4.03 degrees ! Estimated noise=1109.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460712 Jy ! Component: 100 - total flux cleaned = 0.00765974 Jy ! Component: 150 - total flux cleaned = 0.00987446 Jy ! Component: 200 - total flux cleaned = 0.0112095 Jy ! Total flux subtracted in 200 components = 0.0112095 Jy ! Clean residual min=-0.002890 max=0.002734 Jy/beam ! Clean residual mean=-0.000016 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.14912 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 54 components and 0.14912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=20.9 mas, bpa=2.453 degrees ! Estimated noise=1459.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146834 Jy ! Component: 100 - total flux cleaned = 0.0021852 Jy ! Component: 150 - total flux cleaned = 0.0024173 Jy ! Component: 200 - total flux cleaned = 0.00244896 Jy ! Total flux subtracted in 200 components = 0.00244896 Jy ! Clean residual min=-0.002548 max=0.002680 Jy/beam ! Clean residual mean=-0.000028 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.151569 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35277e-05 Jy ! Component: 100 - total flux cleaned = -2.72025e-05 Jy ! Component: 150 - total flux cleaned = -3.97806e-05 Jy ! Component: 200 - total flux cleaned = -5.17056e-05 Jy ! Total flux subtracted in 200 components = -5.17056e-05 Jy ! Clean residual min=-0.002546 max=0.002646 Jy/beam ! Clean residual mean=-0.000028 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.151517 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 87 components and 0.151517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.55 mas, bpa=-4.03 degrees ! Estimated noise=1109.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.83999e-05 Jy ! Component: 100 - total flux cleaned = 0.000238485 Jy ! Component: 150 - total flux cleaned = 0.000396339 Jy ! Component: 200 - total flux cleaned = 0.000453943 Jy ! Total flux subtracted in 200 components = 0.000453943 Jy ! Clean residual min=-0.002688 max=0.002700 Jy/beam ! Clean residual mean=-0.000014 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.151971 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.151971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161897Jy sigma=0.000660 ! Fit after self-cal, rms=0.161881Jy sigma=0.000660 wmodel J0100-3337_S_2017_03_27_pus_map.mod ! Writing 101 model components to file: J0100-3337_S_2017_03_27_pus_map.mod wobs J0100-3337_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0100-3337_S_2017_03_27_pus_uvs.fits wwins J0100-3337_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0100-3337_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00049587 Jy ! Component: 100 - total flux cleaned = -0.000904681 Jy ! Component: 150 - total flux cleaned = -0.0013353 Jy ! Component: 200 - total flux cleaned = -0.00154205 Jy ! Component: 250 - total flux cleaned = -0.00186065 Jy ! Component: 300 - total flux cleaned = -0.00216962 Jy ! Component: 350 - total flux cleaned = -0.00239458 Jy ! Component: 400 - total flux cleaned = -0.00272498 Jy ! Component: 450 - total flux cleaned = -0.00294046 Jy ! Component: 500 - total flux cleaned = -0.00315133 Jy ! Component: 550 - total flux cleaned = -0.00339187 Jy ! Component: 600 - total flux cleaned = -0.00352567 Jy ! Component: 650 - total flux cleaned = -0.00365799 Jy ! Component: 700 - total flux cleaned = -0.00388474 Jy ! Component: 750 - total flux cleaned = -0.00404433 Jy ! Component: 800 - total flux cleaned = -0.00426336 Jy ! Component: 850 - total flux cleaned = -0.00435574 Jy ! Component: 900 - total flux cleaned = -0.00450654 Jy ! Component: 950 - total flux cleaned = -0.00459599 Jy ! Component: 1000 - total flux cleaned = -0.00465415 Jy ! Component: 1050 - total flux cleaned = -0.00474081 Jy ! Component: 1100 - total flux cleaned = -0.00476909 Jy ! Component: 1150 - total flux cleaned = -0.00499275 Jy ! Component: 1200 - total flux cleaned = -0.00502029 Jy ! Component: 1250 - total flux cleaned = -0.00521041 Jy ! Component: 1300 - total flux cleaned = -0.00529084 Jy ! Component: 1350 - total flux cleaned = -0.00536977 Jy ! Component: 1400 - total flux cleaned = -0.00536951 Jy ! Component: 1450 - total flux cleaned = -0.00534373 Jy ! Component: 1500 - total flux cleaned = -0.00536899 Jy ! Component: 1550 - total flux cleaned = -0.00541923 Jy ! Component: 1600 - total flux cleaned = -0.00541928 Jy ! Component: 1650 - total flux cleaned = -0.00537009 Jy ! Component: 1700 - total flux cleaned = -0.00539425 Jy ! Component: 1750 - total flux cleaned = -0.00541796 Jy ! Component: 1800 - total flux cleaned = -0.00534637 Jy ! Component: 1850 - total flux cleaned = -0.00537007 Jy ! Component: 1900 - total flux cleaned = -0.0053468 Jy ! Component: 1950 - total flux cleaned = -0.00539252 Jy ! Component: 2000 - total flux cleaned = -0.00539232 Jy ! Component: 2050 - total flux cleaned = -0.00541482 Jy ! Component: 2100 - total flux cleaned = -0.00543734 Jy ! Component: 2150 - total flux cleaned = -0.00545961 Jy ! Component: 2200 - total flux cleaned = -0.00552545 Jy ! Component: 2250 - total flux cleaned = -0.00548195 Jy ! Component: 2300 - total flux cleaned = -0.00558961 Jy ! Component: 2350 - total flux cleaned = -0.00556846 Jy ! Component: 2400 - total flux cleaned = -0.00563197 Jy ! Component: 2450 - total flux cleaned = -0.00567374 Jy ! Component: 2500 - total flux cleaned = -0.00567368 Jy ! Component: 2550 - total flux cleaned = -0.00577709 Jy ! Component: 2600 - total flux cleaned = -0.00587908 Jy ! Component: 2650 - total flux cleaned = -0.00585884 Jy ! Component: 2700 - total flux cleaned = -0.00589917 Jy ! Component: 2750 - total flux cleaned = -0.00597877 Jy ! Component: 2800 - total flux cleaned = -0.00605795 Jy ! Component: 2850 - total flux cleaned = -0.00603815 Jy ! Component: 2900 - total flux cleaned = -0.00609648 Jy ! Component: 2950 - total flux cleaned = -0.00613516 Jy ! Component: 3000 - total flux cleaned = -0.00617356 Jy ! Component: 3050 - total flux cleaned = -0.00621192 Jy ! Component: 3100 - total flux cleaned = -0.00623106 Jy ! Component: 3150 - total flux cleaned = -0.00638137 Jy ! Component: 3200 - total flux cleaned = -0.00641832 Jy ! Component: 3250 - total flux cleaned = -0.00641816 Jy ! Component: 3300 - total flux cleaned = -0.00647326 Jy ! Component: 3350 - total flux cleaned = -0.00649139 Jy ! Component: 3400 - total flux cleaned = -0.00656384 Jy ! Component: 3450 - total flux cleaned = -0.00663584 Jy ! Component: 3500 - total flux cleaned = -0.00668937 Jy ! Component: 3550 - total flux cleaned = -0.00665371 Jy ! Component: 3600 - total flux cleaned = -0.00677734 Jy ! Component: 3650 - total flux cleaned = -0.00684733 Jy ! Component: 3700 - total flux cleaned = -0.0068298 Jy ! Component: 3750 - total flux cleaned = -0.00686465 Jy ! Component: 3800 - total flux cleaned = -0.00696783 Jy ! Component: 3850 - total flux cleaned = -0.00698489 Jy ! Component: 3900 - total flux cleaned = -0.00700183 Jy ! Component: 3950 - total flux cleaned = -0.00705248 Jy ! Component: 4000 - total flux cleaned = -0.00705262 Jy ! Component: 4050 - total flux cleaned = -0.00705263 Jy ! Total flux subtracted in 4096 components = -0.00701944 Jy ! Clean residual min=-0.000961 max=0.001135 Jy/beam ! Clean residual mean=-0.000005 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.144952 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 399 components and 0.144952 Jy ![Exited script file: muppet] wmap "J0100-3337_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 7.55 at -4.03 degrees (North through East) ! Clean map min=-0.0019378 max=0.13022 Jy/beam ! Writing clean map to FITS file: J0100-3337_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13022 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000298964 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.688752 0.688752 1.3775 2.75501 5.51001 11.02 22.0401 44.0801 88.1602 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 7.55 at -4.03 degrees (North through East) ! Clean map min=-0.0019378 max=0.13022 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0100-3337_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:29:00 2019