! Started logfile: J0058-3347_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:28 2019 obs J0058-3347_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0058-3347_S_2017_10_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.27251 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0058-3347 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0058-3347_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 325 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 265 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959142Jy sigma=0.006955 ! Fit after self-cal, rms=0.914915Jy sigma=0.006698 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.938 mas, bmaj=51.44 mas, bpa=8.01 degrees ! Estimated noise=3444.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0686796 Jy ! Component: 100 - total flux cleaned = 0.0815571 Jy ! Total flux subtracted in 100 components = 0.0815571 Jy ! Clean residual min=-0.006113 max=0.006142 Jy/beam ! Clean residual mean=0.000022 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 0.0815571 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0815571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093180Jy sigma=0.000607 ! Fit after self-cal, rms=0.093079Jy sigma=0.000606 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.587 mas, bmaj=56.38 mas, bpa=9.622 degrees ! Estimated noise=2763.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612406 Jy ! Component: 100 - total flux cleaned = 0.00309575 Jy ! Component: 150 - total flux cleaned = 0.00450131 Jy ! Component: 200 - total flux cleaned = 0.00533307 Jy ! Total flux subtracted in 200 components = 0.00533307 Jy ! Clean residual min=-0.001850 max=0.001828 Jy/beam ! Clean residual mean=0.000006 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0868902 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 112 components and 0.0868902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092210Jy sigma=0.000601 ! Fit after self-cal, rms=0.091883Jy sigma=0.000600 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.17 ! LA 0.98 MK 1.00* NL 1.00* OV 0.99 ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.01 ! LA 1.07 MK 1.00* NL 0.97 OV 0.99 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.97 ! LA 0.84 MK 1.00* NL 1.08 OV 0.94 ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.091883Jy sigma=0.000600 ! Fit after self-cal, rms=0.090323Jy sigma=0.000602 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.369 mas, bmaj=55.64 mas, bpa=9.704 degrees ! Estimated noise=2892.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894864 Jy ! Component: 100 - total flux cleaned = 0.000741647 Jy ! Component: 150 - total flux cleaned = 0.000947073 Jy ! Component: 200 - total flux cleaned = 0.00095048 Jy ! Total flux subtracted in 200 components = 0.00095048 Jy ! Clean residual min=-0.001257 max=0.001243 Jy/beam ! Clean residual mean=-0.000000 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0878407 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 178 components and 0.0878407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090191Jy sigma=0.000601 ! Fit after self-cal, rms=0.089985Jy sigma=0.000601 ! Inverting map ! Added new window around map position (-10, 60). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110833 Jy ! Component: 100 - total flux cleaned = 0.00149224 Jy ! Component: 150 - total flux cleaned = 0.00188808 Jy ! Component: 200 - total flux cleaned = 0.00212236 Jy ! Total flux subtracted in 200 components = 0.00212236 Jy ! Clean residual min=-0.001003 max=0.000871 Jy/beam ! Clean residual mean=0.000003 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.089963 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 243 components and 0.089963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089932Jy sigma=0.000600 ! Fit after self-cal, rms=0.089796Jy sigma=0.000600 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089796Jy sigma=0.000600 ! Fit after self-cal, rms=0.089185Jy sigma=0.000600 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.364 mas, bmaj=55.61 mas, bpa=9.702 degrees ! Estimated noise=2880.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005309 Jy ! Component: 100 - total flux cleaned = 0.000445357 Jy ! Component: 150 - total flux cleaned = 0.00047244 Jy ! Component: 200 - total flux cleaned = 0.000572517 Jy ! Total flux subtracted in 200 components = 0.000572517 Jy ! Clean residual min=-0.000863 max=0.000820 Jy/beam ! Clean residual mean=0.000002 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.0905356 Jy selfcal ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 334 components and 0.0905356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089152Jy sigma=0.000600 ! Fit after self-cal, rms=0.089074Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357706 Jy ! Component: 100 - total flux cleaned = 0.000417483 Jy ! Component: 150 - total flux cleaned = 0.000543843 Jy ! Component: 200 - total flux cleaned = 0.000627837 Jy ! Total flux subtracted in 200 components = 0.000627837 Jy ! Clean residual min=-0.000904 max=0.000798 Jy/beam ! Clean residual mean=0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0911634 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 407 components and 0.0911634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089055Jy sigma=0.000599 ! Fit after self-cal, rms=0.089011Jy sigma=0.000599 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089011Jy sigma=0.000599 ! Fit after self-cal, rms=0.088870Jy sigma=0.000599 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.359 mas, bmaj=55.57 mas, bpa=9.701 degrees ! Estimated noise=2879.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335525 Jy ! Component: 100 - total flux cleaned = 0.000510389 Jy ! Component: 150 - total flux cleaned = 0.00079131 Jy ! Component: 200 - total flux cleaned = 0.00106166 Jy ! Total flux subtracted in 200 components = 0.00106166 Jy ! Clean residual min=-0.000939 max=0.000816 Jy/beam ! Clean residual mean=0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0922251 Jy selfcal ! Performing phase self-cal ! Adding 112 model components to the UV plane model. ! The established model now contains 488 components and 0.0922251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088857Jy sigma=0.000599 ! Fit after self-cal, rms=0.088817Jy sigma=0.000599 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033364 Jy ! Component: 100 - total flux cleaned = 0.000621108 Jy ! Component: 150 - total flux cleaned = 0.000869985 Jy ! Component: 200 - total flux cleaned = 0.000980777 Jy ! Total flux subtracted in 200 components = 0.000980777 Jy ! Clean residual min=-0.000949 max=0.000817 Jy/beam ! Clean residual mean=0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0932059 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 522 components and 0.0932058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088805Jy sigma=0.000599 ! Fit after self-cal, rms=0.088767Jy sigma=0.000599 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088767Jy sigma=0.000599 ! Fit after self-cal, rms=0.088586Jy sigma=0.000599 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=55.48 mas, bpa=10 degrees ! Estimated noise=2889.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627774 Jy ! Component: 100 - total flux cleaned = 0.000978793 Jy ! Component: 150 - total flux cleaned = 0.00122907 Jy ! Component: 200 - total flux cleaned = 0.00138406 Jy ! Total flux subtracted in 200 components = 0.00138406 Jy ! Clean residual min=-0.000953 max=0.000818 Jy/beam ! Clean residual mean=0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0945899 Jy selfcal ! Performing phase self-cal ! Adding 100 model components to the UV plane model. ! The established model now contains 588 components and 0.0945899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088575Jy sigma=0.000599 ! Fit after self-cal, rms=0.088525Jy sigma=0.000599 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609982 Jy ! Component: 100 - total flux cleaned = 0.00102659 Jy ! Component: 150 - total flux cleaned = 0.00135501 Jy ! Component: 200 - total flux cleaned = 0.00162866 Jy ! Total flux subtracted in 200 components = 0.00162866 Jy ! Clean residual min=-0.001061 max=0.000858 Jy/beam ! Clean residual mean=0.000002 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.0962185 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 615 components and 0.0962185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088513Jy sigma=0.000599 ! Fit after self-cal, rms=0.088461Jy sigma=0.000599 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.355 mas, bmaj=55.53 mas, bpa=9.696 degrees ! Estimated noise=2876.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.355 x 55.53 at 9.696 degrees (North through East) ! Clean map min=-0.0043105 max=0.082196 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.894 mas, bmaj=51.5 mas, bpa=8.102 degrees ! Estimated noise=3493.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0681748 Jy ! Component: 100 - total flux cleaned = 0.0850318 Jy ! Component: 150 - total flux cleaned = 0.0919939 Jy ! Component: 200 - total flux cleaned = 0.0968441 Jy ! Total flux subtracted in 200 components = 0.0968441 Jy ! Clean residual min=-0.005592 max=0.004624 Jy/beam ! Clean residual mean=0.000014 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.096844 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.096844 Jy ! Inverting map and beam ! Estimated beam: bmin=9.355 mas, bmaj=55.53 mas, bpa=9.696 degrees ! Estimated noise=2876.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210227 Jy ! Component: 100 - total flux cleaned = 0.00325195 Jy ! Component: 150 - total flux cleaned = 0.00493502 Jy ! Component: 200 - total flux cleaned = 0.00618119 Jy ! Total flux subtracted in 200 components = 0.00618119 Jy ! Clean residual min=-0.003056 max=0.002543 Jy/beam ! Clean residual mean=0.000008 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.103025 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 167 components and 0.103025 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=55.48 mas, bpa=10 degrees ! Estimated noise=2889.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108052 Jy ! Component: 100 - total flux cleaned = 0.00185894 Jy ! Component: 150 - total flux cleaned = 0.00251041 Jy ! Component: 200 - total flux cleaned = 0.00310977 Jy ! Total flux subtracted in 200 components = 0.00310977 Jy ! Clean residual min=-0.001978 max=0.001681 Jy/beam ! Clean residual mean=0.000004 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.106135 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024536 Jy ! Component: 100 - total flux cleaned = 0.00031742 Jy ! Component: 150 - total flux cleaned = 0.000350617 Jy ! Component: 200 - total flux cleaned = 0.000489365 Jy ! Total flux subtracted in 200 components = 0.000489365 Jy ! Clean residual min=-0.001428 max=0.001381 Jy/beam ! Clean residual mean=0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.106624 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 257 components and 0.106624 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.355 mas, bmaj=55.53 mas, bpa=9.696 degrees ! Estimated noise=2876.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154651 Jy ! Component: 100 - total flux cleaned = -0.000100546 Jy ! Component: 150 - total flux cleaned = -7.62886e-06 Jy ! Component: 200 - total flux cleaned = 7.19821e-05 Jy ! Total flux subtracted in 200 components = 7.19821e-05 Jy ! Clean residual min=-0.001083 max=0.001276 Jy/beam ! Clean residual mean=0.000002 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.106696 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 317 components and 0.106696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088526Jy sigma=0.000599 ! Fit after self-cal, rms=0.088375Jy sigma=0.000599 wmodel J0058-3347_S_2017_10_21_pus_map.mod ! Writing 317 model components to file: J0058-3347_S_2017_10_21_pus_map.mod wobs J0058-3347_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0058-3347_S_2017_10_21_pus_uvs.fits wwins J0058-3347_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0058-3347_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200236 Jy ! Component: 100 - total flux cleaned = -7.29004e-05 Jy ! Component: 150 - total flux cleaned = 0.000188673 Jy ! Component: 200 - total flux cleaned = 0.000360189 Jy ! Component: 250 - total flux cleaned = 0.000502839 Jy ! Component: 300 - total flux cleaned = 0.000517284 Jy ! Component: 350 - total flux cleaned = 0.000601397 Jy ! Component: 400 - total flux cleaned = 0.000614839 Jy ! Component: 450 - total flux cleaned = 0.000601664 Jy ! Component: 500 - total flux cleaned = 0.000536589 Jy ! Component: 550 - total flux cleaned = 0.000485142 Jy ! Component: 600 - total flux cleaned = 0.000420951 Jy ! Component: 650 - total flux cleaned = 0.000369133 Jy ! Component: 700 - total flux cleaned = 0.000317258 Jy ! Component: 750 - total flux cleaned = 0.00026443 Jy ! Component: 800 - total flux cleaned = 0.000224204 Jy ! Component: 850 - total flux cleaned = 0.000182813 Jy ! Component: 900 - total flux cleaned = 0.000139707 Jy ! Component: 950 - total flux cleaned = 9.48354e-05 Jy ! Component: 1000 - total flux cleaned = 4.79934e-05 Jy ! Component: 1050 - total flux cleaned = -9.70701e-07 Jy ! Component: 1100 - total flux cleaned = -3.49516e-05 Jy ! Component: 1150 - total flux cleaned = -0.000105531 Jy ! Component: 1200 - total flux cleaned = -0.000161056 Jy ! Component: 1250 - total flux cleaned = -0.000238641 Jy ! Component: 1300 - total flux cleaned = -0.000299159 Jy ! Component: 1350 - total flux cleaned = -0.000383523 Jy ! Component: 1400 - total flux cleaned = -0.000471904 Jy ! Component: 1450 - total flux cleaned = -0.000587371 Jy ! Component: 1500 - total flux cleaned = -0.000684103 Jy ! Component: 1550 - total flux cleaned = -0.000810592 Jy ! Component: 1600 - total flux cleaned = -0.000836537 Jy ! Component: 1650 - total flux cleaned = -0.000947692 Jy ! Component: 1700 - total flux cleaned = -0.00100632 Jy ! Component: 1750 - total flux cleaned = -0.00106805 Jy ! Component: 1800 - total flux cleaned = -0.0011335 Jy ! Component: 1850 - total flux cleaned = -0.00120218 Jy ! Component: 1900 - total flux cleaned = -0.00127485 Jy ! Component: 1950 - total flux cleaned = -0.00139212 Jy ! Component: 2000 - total flux cleaned = -0.00147633 Jy ! Component: 2050 - total flux cleaned = -0.00156515 Jy ! Component: 2100 - total flux cleaned = -0.00165939 Jy ! Component: 2150 - total flux cleaned = -0.00170879 Jy ! Component: 2200 - total flux cleaned = -0.00181197 Jy ! Component: 2250 - total flux cleaned = -0.00192167 Jy ! Component: 2300 - total flux cleaned = -0.00203986 Jy ! Component: 2350 - total flux cleaned = -0.00210247 Jy ! Component: 2400 - total flux cleaned = -0.00223288 Jy ! Component: 2450 - total flux cleaned = -0.00230157 Jy ! Component: 2500 - total flux cleaned = -0.0024481 Jy ! Component: 2550 - total flux cleaned = -0.00252567 Jy ! Component: 2600 - total flux cleaned = -0.00269182 Jy ! Component: 2650 - total flux cleaned = -0.00286726 Jy ! Component: 2700 - total flux cleaned = -0.0028676 Jy ! Component: 2750 - total flux cleaned = -0.00306715 Jy ! Component: 2800 - total flux cleaned = -0.00306916 Jy ! Component: 2850 - total flux cleaned = -0.00317973 Jy ! Component: 2900 - total flux cleaned = -0.00329647 Jy ! Component: 2950 - total flux cleaned = -0.00342017 Jy ! Component: 3000 - total flux cleaned = -0.00342024 Jy ! Component: 3050 - total flux cleaned = -0.00355335 Jy ! Component: 3100 - total flux cleaned = -0.00369931 Jy ! Component: 3150 - total flux cleaned = -0.00385155 Jy ! Component: 3200 - total flux cleaned = -0.00418706 Jy ! Component: 3250 - total flux cleaned = -0.00419216 Jy ! Component: 3300 - total flux cleaned = -0.0041953 Jy ! Component: 3350 - total flux cleaned = -0.00399443 Jy ! Component: 3400 - total flux cleaned = -0.00441065 Jy ! Component: 3450 - total flux cleaned = -0.00418463 Jy ! Component: 3500 - total flux cleaned = -0.00442184 Jy ! Component: 3550 - total flux cleaned = -0.00441849 Jy ! Component: 3600 - total flux cleaned = -0.00441166 Jy ! Component: 3650 - total flux cleaned = -0.00441001 Jy ! Component: 3700 - total flux cleaned = -0.00440235 Jy ! Component: 3750 - total flux cleaned = -0.00471216 Jy ! Component: 3800 - total flux cleaned = -0.00472063 Jy ! Component: 3850 - total flux cleaned = -0.00471977 Jy ! Component: 3900 - total flux cleaned = -0.00472417 Jy ! Component: 3950 - total flux cleaned = -0.00431155 Jy ! Component: 4000 - total flux cleaned = -0.00472639 Jy ! Component: 4050 - total flux cleaned = -0.00473729 Jy ! Total flux subtracted in 4096 components = -0.00474155 Jy ! Clean residual min=-0.026221 max=0.024444 Jy/beam ! Clean residual mean=-0.000027 rms=0.008470 Jy/beam ! Combined flux in latest and established models = 0.101955 Jy keep ! Adding 202 model components to the UV plane model. ! The established model now contains 519 components and 0.101955 Jy ![Exited script file: muppet] wmap "J0058-3347_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.355 x 55.53 at 9.696 degrees (North through East) ! Clean map min=-0.052061 max=0.075062 Jy/beam ! Writing clean map to FITS file: J0058-3347_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0750622 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00858873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -34.3265 34.3265 68.6529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0257 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.355 x 55.53 at 9.696 degrees (North through East) ! Clean map min=-0.052061 max=0.075062 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0058-3347_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:35 2019