! Started logfile: J0058-3347_S_2017_10_09_pus_uvs.log on Sun May 12 13:02:05 2019 obs J0058-3347_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0058-3347_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.385024 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0058-3347 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 6376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0058-3347_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 387 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 429 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 429 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 918 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972785Jy sigma=0.006286 ! Fit after self-cal, rms=0.921460Jy sigma=0.005967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.442 mas, bmaj=19.17 mas, bpa=-6.109 degrees ! Estimated noise=2493.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614541 Jy ! Component: 100 - total flux cleaned = 0.0771861 Jy ! Total flux subtracted in 100 components = 0.0771861 Jy ! Clean residual min=-0.005510 max=0.006655 Jy/beam ! Clean residual mean=-0.000019 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.0771861 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0771861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104663Jy sigma=0.000617 ! Fit after self-cal, rms=0.104262Jy sigma=0.000614 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.437 mas, bmaj=24.05 mas, bpa=-7.508 degrees ! Estimated noise=1701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108563 Jy ! Component: 100 - total flux cleaned = 0.0163004 Jy ! Component: 150 - total flux cleaned = 0.0194791 Jy ! Component: 200 - total flux cleaned = 0.0214361 Jy ! Total flux subtracted in 200 components = 0.0214361 Jy ! Clean residual min=-0.004514 max=0.004727 Jy/beam ! Clean residual mean=-0.000020 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.0986222 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 102 components and 0.0986222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103044Jy sigma=0.000608 ! Fit after self-cal, rms=0.102927Jy sigma=0.000607 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.09 KP 1.09 ! LA 1.06 MK 1.00* NL 0.87 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.15 KP 0.95 ! LA 0.96 MK 1.00* NL 1.16 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.09 KP 0.90 ! LA 0.81 MK 1.00* NL 1.06 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.102927Jy sigma=0.000607 ! Fit after self-cal, rms=0.101252Jy sigma=0.000603 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.673 mas, bmaj=24.26 mas, bpa=-7.079 degrees ! Estimated noise=1751.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852208 Jy ! Component: 100 - total flux cleaned = 0.000903791 Jy ! Component: 150 - total flux cleaned = 0.000949469 Jy ! Component: 200 - total flux cleaned = 0.000970864 Jy ! Total flux subtracted in 200 components = 0.000970864 Jy ! Clean residual min=-0.003949 max=0.004812 Jy/beam ! Clean residual mean=-0.000007 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.099593 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 109 components and 0.099593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101236Jy sigma=0.000603 ! Fit after self-cal, rms=0.101228Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101228Jy sigma=0.000603 ! Fit after self-cal, rms=0.101396Jy sigma=0.000601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.691 mas, bmaj=24.5 mas, bpa=-7.159 degrees ! Estimated noise=1757.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.44482e-05 Jy ! Component: 100 - total flux cleaned = 4.54974e-05 Jy ! Component: 150 - total flux cleaned = 2.74829e-05 Jy ! Component: 200 - total flux cleaned = 1.06671e-05 Jy ! Total flux subtracted in 200 components = 1.06671e-05 Jy ! Clean residual min=-0.003551 max=0.003841 Jy/beam ! Clean residual mean=-0.000022 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.0996037 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.0996037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101389Jy sigma=0.000601 ! Fit after self-cal, rms=0.101534Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.003e-05 Jy ! Component: 100 - total flux cleaned = 4.98237e-05 Jy ! Component: 150 - total flux cleaned = 4.99352e-05 Jy ! Component: 200 - total flux cleaned = 4.99298e-05 Jy ! Total flux subtracted in 200 components = 4.99298e-05 Jy ! Clean residual min=-0.003817 max=0.004067 Jy/beam ! Clean residual mean=-0.000021 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0996536 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 117 components and 0.0996536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101526Jy sigma=0.000601 ! Fit after self-cal, rms=0.101529Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101529Jy sigma=0.000601 ! Fit after self-cal, rms=0.102004Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.682 mas, bmaj=24.5 mas, bpa=-7.148 degrees ! Estimated noise=1755.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.57283e-05 Jy ! Component: 100 - total flux cleaned = -2.54538e-05 Jy ! Component: 150 - total flux cleaned = -2.51259e-05 Jy ! Component: 200 - total flux cleaned = -4.28453e-05 Jy ! Total flux subtracted in 200 components = -4.28453e-05 Jy ! Clean residual min=-0.003714 max=0.003963 Jy/beam ! Clean residual mean=-0.000022 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.0996108 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 121 components and 0.0996108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101997Jy sigma=0.000600 ! Fit after self-cal, rms=0.102048Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.95819e-05 Jy ! Component: 100 - total flux cleaned = -7.91047e-05 Jy ! Component: 150 - total flux cleaned = -7.89039e-05 Jy ! Component: 200 - total flux cleaned = -7.89804e-05 Jy ! Total flux subtracted in 200 components = -7.89804e-05 Jy ! Clean residual min=-0.003698 max=0.004026 Jy/beam ! Clean residual mean=-0.000021 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.0995318 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 122 components and 0.0995318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102042Jy sigma=0.000600 ! Fit after self-cal, rms=0.102044Jy sigma=0.000600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102044Jy sigma=0.000600 ! Fit after self-cal, rms=0.102122Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.085 mas, bmaj=29.35 mas, bpa=-6.318 degrees ! Estimated noise=1867.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250479 Jy ! Component: 100 - total flux cleaned = -0.00029547 Jy ! Component: 150 - total flux cleaned = -0.000319952 Jy ! Component: 200 - total flux cleaned = -0.000340303 Jy ! Total flux subtracted in 200 components = -0.000340303 Jy ! Clean residual min=-0.003300 max=0.003760 Jy/beam ! Clean residual mean=-0.000027 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0991915 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.0991915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102119Jy sigma=0.000600 ! Fit after self-cal, rms=0.102156Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.59693e-05 Jy ! Component: 100 - total flux cleaned = -0.000129716 Jy ! Component: 150 - total flux cleaned = -0.000138959 Jy ! Component: 200 - total flux cleaned = -0.000147454 Jy ! Total flux subtracted in 200 components = -0.000147454 Jy ! Clean residual min=-0.003302 max=0.003762 Jy/beam ! Clean residual mean=-0.000027 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.099044 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 129 components and 0.099044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102155Jy sigma=0.000600 ! Fit after self-cal, rms=0.102154Jy sigma=0.000600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.673 mas, bmaj=24.44 mas, bpa=-7.09 degrees ! Estimated noise=1752.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.673 x 24.44 at -7.09 degrees (North through East) ! Clean map min=-0.0035178 max=0.081014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=19.46 mas, bpa=-5.28 degrees ! Estimated noise=2660.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620742 Jy ! Component: 100 - total flux cleaned = 0.0792658 Jy ! Component: 150 - total flux cleaned = 0.0874755 Jy ! Component: 200 - total flux cleaned = 0.0924515 Jy ! Total flux subtracted in 200 components = 0.0924515 Jy ! Clean residual min=-0.005797 max=0.005459 Jy/beam ! Clean residual mean=-0.000014 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.0924515 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.0924515 Jy ! Inverting map and beam ! Estimated beam: bmin=5.673 mas, bmaj=24.44 mas, bpa=-7.09 degrees ! Estimated noise=1752.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418216 Jy ! Component: 100 - total flux cleaned = 0.00625712 Jy ! Component: 150 - total flux cleaned = 0.00719253 Jy ! Component: 200 - total flux cleaned = 0.0072668 Jy ! Total flux subtracted in 200 components = 0.0072668 Jy ! Clean residual min=-0.003594 max=0.004090 Jy/beam ! Clean residual mean=-0.000020 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.0997183 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 76 components and 0.0997183 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.085 mas, bmaj=29.35 mas, bpa=-6.318 degrees ! Estimated noise=1867.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.25958e-05 Jy ! Component: 100 - total flux cleaned = -2.41532e-05 Jy ! Component: 150 - total flux cleaned = -8.18967e-05 Jy ! Component: 200 - total flux cleaned = -0.000134249 Jy ! Total flux subtracted in 200 components = -0.000134249 Jy ! Clean residual min=-0.003461 max=0.003767 Jy/beam ! Clean residual mean=-0.000027 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.099584 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.24699e-05 Jy ! Component: 100 - total flux cleaned = -6.29136e-05 Jy ! Component: 150 - total flux cleaned = -9.1649e-05 Jy ! Component: 200 - total flux cleaned = -0.000132529 Jy ! Total flux subtracted in 200 components = -0.000132529 Jy ! Clean residual min=-0.003385 max=0.003766 Jy/beam ! Clean residual mean=-0.000027 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.0994515 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.0994515 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.673 mas, bmaj=24.44 mas, bpa=-7.09 degrees ! Estimated noise=1752.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10298e-06 Jy ! Component: 100 - total flux cleaned = 0.000193481 Jy ! Component: 150 - total flux cleaned = 0.000310141 Jy ! Component: 200 - total flux cleaned = 0.00033608 Jy ! Total flux subtracted in 200 components = 0.00033608 Jy ! Clean residual min=-0.003593 max=0.004012 Jy/beam ! Clean residual mean=-0.000020 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0997876 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.0997876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102188Jy sigma=0.000600 ! Fit after self-cal, rms=0.102186Jy sigma=0.000600 wmodel J0058-3347_S_2017_10_09_pus_map.mod ! Writing 97 model components to file: J0058-3347_S_2017_10_09_pus_map.mod wobs J0058-3347_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0058-3347_S_2017_10_09_pus_uvs.fits wwins J0058-3347_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0058-3347_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104995 Jy ! Component: 100 - total flux cleaned = 0.001624 Jy ! Component: 150 - total flux cleaned = 0.00167904 Jy ! Component: 200 - total flux cleaned = 0.00154286 Jy ! Component: 250 - total flux cleaned = 0.00141665 Jy ! Component: 300 - total flux cleaned = 0.00122359 Jy ! Component: 350 - total flux cleaned = 0.00108131 Jy ! Component: 400 - total flux cleaned = 0.00101348 Jy ! Component: 450 - total flux cleaned = 0.000885836 Jy ! Component: 500 - total flux cleaned = 0.000886352 Jy ! Component: 550 - total flux cleaned = 0.000858413 Jy ! Component: 600 - total flux cleaned = 0.000859508 Jy ! Component: 650 - total flux cleaned = 0.000859671 Jy ! Component: 700 - total flux cleaned = 0.000807422 Jy ! Component: 750 - total flux cleaned = 0.000781775 Jy ! Component: 800 - total flux cleaned = 0.000804992 Jy ! Component: 850 - total flux cleaned = 0.000687227 Jy ! Component: 900 - total flux cleaned = 0.000595808 Jy ! Component: 950 - total flux cleaned = 0.000462999 Jy ! Component: 1000 - total flux cleaned = 0.000312944 Jy ! Component: 1050 - total flux cleaned = 0.000188232 Jy ! Component: 1100 - total flux cleaned = 0.000127143 Jy ! Component: 1150 - total flux cleaned = 4.75979e-05 Jy ! Component: 1200 - total flux cleaned = -4.96876e-05 Jy ! Component: 1250 - total flux cleaned = -0.000106721 Jy ! Component: 1300 - total flux cleaned = -0.00019982 Jy ! Component: 1350 - total flux cleaned = -0.000218174 Jy ! Component: 1400 - total flux cleaned = -0.00025404 Jy ! Component: 1450 - total flux cleaned = -0.000289653 Jy ! Component: 1500 - total flux cleaned = -0.000341418 Jy ! Component: 1550 - total flux cleaned = -0.000425249 Jy ! Component: 1600 - total flux cleaned = -0.000441482 Jy ! Component: 1650 - total flux cleaned = -0.000473926 Jy ! Component: 1700 - total flux cleaned = -0.000521524 Jy ! Component: 1750 - total flux cleaned = -0.000537059 Jy ! Component: 1800 - total flux cleaned = -0.000583335 Jy ! Component: 1850 - total flux cleaned = -0.000628807 Jy ! Component: 1900 - total flux cleaned = -0.000688918 Jy ! Component: 1950 - total flux cleaned = -0.000762977 Jy ! Component: 2000 - total flux cleaned = -0.000865403 Jy ! Component: 2050 - total flux cleaned = -0.000937855 Jy ! Component: 2100 - total flux cleaned = -0.00105243 Jy ! Component: 2150 - total flux cleaned = -0.00112337 Jy ! Component: 2200 - total flux cleaned = -0.00119363 Jy ! Component: 2250 - total flux cleaned = -0.00123542 Jy ! Component: 2300 - total flux cleaned = -0.00131832 Jy ! Component: 2350 - total flux cleaned = -0.0014004 Jy ! Component: 2400 - total flux cleaned = -0.0014275 Jy ! Component: 2450 - total flux cleaned = -0.00149481 Jy ! Component: 2500 - total flux cleaned = -0.00154824 Jy ! Component: 2550 - total flux cleaned = -0.00158809 Jy ! Component: 2600 - total flux cleaned = -0.00162764 Jy ! Component: 2650 - total flux cleaned = -0.00166701 Jy ! Component: 2700 - total flux cleaned = -0.00173211 Jy ! Component: 2750 - total flux cleaned = -0.00177088 Jy ! Component: 2800 - total flux cleaned = -0.0018224 Jy ! Component: 2850 - total flux cleaned = -0.00184798 Jy ! Component: 2900 - total flux cleaned = -0.00186067 Jy ! Component: 2950 - total flux cleaned = -0.00188597 Jy ! Component: 3000 - total flux cleaned = -0.00187336 Jy ! Component: 3050 - total flux cleaned = -0.00186075 Jy ! Component: 3100 - total flux cleaned = -0.00187332 Jy ! Component: 3150 - total flux cleaned = -0.00186079 Jy ! Component: 3200 - total flux cleaned = -0.00184826 Jy ! Component: 3250 - total flux cleaned = -0.00182329 Jy ! Component: 3300 - total flux cleaned = -0.00179837 Jy ! Component: 3350 - total flux cleaned = -0.0018233 Jy ! Component: 3400 - total flux cleaned = -0.00181086 Jy ! Component: 3450 - total flux cleaned = -0.00178594 Jy ! Component: 3500 - total flux cleaned = -0.00179838 Jy ! Component: 3550 - total flux cleaned = -0.00177351 Jy ! Component: 3600 - total flux cleaned = -0.00176103 Jy ! Component: 3650 - total flux cleaned = -0.00174854 Jy ! Component: 3700 - total flux cleaned = -0.00174856 Jy ! Component: 3750 - total flux cleaned = -0.00173614 Jy ! Component: 3800 - total flux cleaned = -0.00172372 Jy ! Component: 3850 - total flux cleaned = -0.00173616 Jy ! Component: 3900 - total flux cleaned = -0.00172376 Jy ! Component: 3950 - total flux cleaned = -0.00172374 Jy ! Component: 4000 - total flux cleaned = -0.00171123 Jy ! Component: 4050 - total flux cleaned = -0.00171119 Jy ! Total flux subtracted in 4096 components = -0.00174866 Jy ! Clean residual min=-0.000727 max=0.000676 Jy/beam ! Clean residual mean=0.000003 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0980389 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 401 components and 0.0980389 Jy ![Exited script file: muppet] wmap "J0058-3347_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.673 x 24.44 at -7.09 degrees (North through East) ! Clean map min=-0.0021204 max=0.080452 Jy/beam ! Writing clean map to FITS file: J0058-3347_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0804524 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002431 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.906497 0.906497 1.81299 3.62599 7.25198 14.504 29.0079 58.0158 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.673 x 24.44 at -7.09 degrees (North through East) ! Clean map min=-0.0021204 max=0.080452 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0058-3347_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:10 2019