! Started logfile: J0058-3347_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:28:46 2019 obs J0058-3347_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0058-3347_S_2017_03_27_pus_uva.fits ! AN table 1: 98 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.919274 visibilities/baseline/integration-bin. ! Found source: J0058-3347 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 16216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0058-3347_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 402 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974234Jy sigma=0.005057 ! Fit after self-cal, rms=0.920809Jy sigma=0.004835 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=6.433 mas, bpa=-2.958 degrees ! Estimated noise=1915.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0694973 Jy ! Component: 100 - total flux cleaned = 0.0848061 Jy ! Total flux subtracted in 100 components = 0.0848061 Jy ! Clean residual min=-0.005867 max=0.006769 Jy/beam ! Clean residual mean=-0.000001 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.0848061 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0848061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147550Jy sigma=0.000662 ! Fit after self-cal, rms=0.147085Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.582 mas, bpa=-4.033 degrees ! Estimated noise=1226.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333578 Jy ! Component: 100 - total flux cleaned = 0.00339909 Jy ! Component: 150 - total flux cleaned = 0.0033465 Jy ! Component: 200 - total flux cleaned = 0.0033459 Jy ! Total flux subtracted in 200 components = 0.0033459 Jy ! Clean residual min=-0.004392 max=0.004247 Jy/beam ! Clean residual mean=0.000000 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.088152 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.088152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146922Jy sigma=0.000660 ! Fit after self-cal, rms=0.146913Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 1.02 KP 1.04 ! LA 0.97 MK 1.00 NL 0.94 OV 1.05 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.08 HN 1.09 KP 0.95 ! LA 0.97 MK 1.05 NL 0.97 OV 1.29 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.06 HN 1.14 KP 1.00 ! LA 0.99 MK 1.05 NL 1.00 OV 1.00 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.90 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 0.91 ! PT 0.95 SC 0.76 ! ! ! Fit before self-cal, rms=0.146913Jy sigma=0.000660 ! Fit after self-cal, rms=0.147531Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.501 mas, bpa=-3.589 degrees ! Estimated noise=1240 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200327 Jy ! Component: 100 - total flux cleaned = 0.00208946 Jy ! Component: 150 - total flux cleaned = 0.00208862 Jy ! Component: 200 - total flux cleaned = 0.00205679 Jy ! Total flux subtracted in 200 components = 0.00205679 Jy ! Clean residual min=-0.004591 max=0.004639 Jy/beam ! Clean residual mean=0.000006 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.0902088 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0902088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147476Jy sigma=0.000658 ! Fit after self-cal, rms=0.147516Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147516Jy sigma=0.000657 ! Fit after self-cal, rms=0.146912Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=7.483 mas, bpa=-3.704 degrees ! Estimated noise=1254.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123758 Jy ! Component: 100 - total flux cleaned = 0.00154193 Jy ! Component: 150 - total flux cleaned = 0.00154223 Jy ! Component: 200 - total flux cleaned = 0.00155846 Jy ! Total flux subtracted in 200 components = 0.00155846 Jy ! Clean residual min=-0.003774 max=0.003144 Jy/beam ! Clean residual mean=-0.000002 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0917673 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0917673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146899Jy sigma=0.000655 ! Fit after self-cal, rms=0.147013Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284501 Jy ! Component: 100 - total flux cleaned = 0.000302312 Jy ! Component: 150 - total flux cleaned = 0.000318408 Jy ! Component: 200 - total flux cleaned = 0.000288449 Jy ! Total flux subtracted in 200 components = 0.000288449 Jy ! Clean residual min=-0.003775 max=0.003211 Jy/beam ! Clean residual mean=-0.000003 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.0920557 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.0920557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147008Jy sigma=0.000655 ! Fit after self-cal, rms=0.146987Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146987Jy sigma=0.000655 ! Fit after self-cal, rms=0.147701Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.48 mas, bpa=-3.577 degrees ! Estimated noise=1252.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166594 Jy ! Component: 100 - total flux cleaned = -7.26464e-05 Jy ! Component: 150 - total flux cleaned = -8.94295e-05 Jy ! Component: 200 - total flux cleaned = -8.94332e-05 Jy ! Total flux subtracted in 200 components = -8.94332e-05 Jy ! Clean residual min=-0.003673 max=0.002935 Jy/beam ! Clean residual mean=-0.000006 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0919663 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0919663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147695Jy sigma=0.000654 ! Fit after self-cal, rms=0.147757Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.58536e-06 Jy ! Component: 100 - total flux cleaned = 7.47306e-05 Jy ! Component: 150 - total flux cleaned = 5.94242e-05 Jy ! Component: 200 - total flux cleaned = 4.48325e-05 Jy ! Total flux subtracted in 200 components = 4.48325e-05 Jy ! Clean residual min=-0.003699 max=0.002949 Jy/beam ! Clean residual mean=-0.000007 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0920111 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0920111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147753Jy sigma=0.000654 ! Fit after self-cal, rms=0.147756Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147756Jy sigma=0.000654 ! Fit after self-cal, rms=0.148017Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.99 mas, bmaj=20.62 mas, bpa=2.7 degrees ! Estimated noise=1669.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.39208e-05 Jy ! Component: 100 - total flux cleaned = -6.27713e-05 Jy ! Component: 150 - total flux cleaned = -6.21369e-05 Jy ! Component: 200 - total flux cleaned = -6.13349e-05 Jy ! Total flux subtracted in 200 components = -6.13349e-05 Jy ! Clean residual min=-0.004274 max=0.003516 Jy/beam ! Clean residual mean=-0.000016 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0919498 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 52 components and 0.0919498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148019Jy sigma=0.000654 ! Fit after self-cal, rms=0.148034Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.15783e-05 Jy ! Component: 100 - total flux cleaned = -3.36502e-05 Jy ! Component: 150 - total flux cleaned = -3.54765e-05 Jy ! Component: 200 - total flux cleaned = -4.14049e-05 Jy ! Total flux subtracted in 200 components = -4.14049e-05 Jy ! Clean residual min=-0.004285 max=0.003523 Jy/beam ! Clean residual mean=-0.000016 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.0919084 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.0919084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148035Jy sigma=0.000654 ! Fit after self-cal, rms=0.148036Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.479 mas, bpa=-3.463 degrees ! Estimated noise=1251.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.914 x 7.479 at -3.463 degrees (North through East) ! Clean map min=-0.0035877 max=0.091785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.344 mas, bmaj=6.324 mas, bpa=-2.45 degrees ! Estimated noise=1923.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0704984 Jy ! Component: 100 - total flux cleaned = 0.0863169 Jy ! Component: 150 - total flux cleaned = 0.089332 Jy ! Component: 200 - total flux cleaned = 0.0901842 Jy ! Total flux subtracted in 200 components = 0.0901842 Jy ! Clean residual min=-0.005045 max=0.004748 Jy/beam ! Clean residual mean=-0.000003 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.0901842 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0901842 Jy ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.479 mas, bpa=-3.463 degrees ! Estimated noise=1251.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192588 Jy ! Component: 100 - total flux cleaned = 0.00193038 Jy ! Component: 150 - total flux cleaned = 0.0019282 Jy ! Component: 200 - total flux cleaned = 0.00189258 Jy ! Total flux subtracted in 200 components = 0.00189258 Jy ! Clean residual min=-0.003567 max=0.002983 Jy/beam ! Clean residual mean=-0.000006 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0920768 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0920768 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.99 mas, bmaj=20.62 mas, bpa=2.7 degrees ! Estimated noise=1669.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109881 Jy ! Component: 100 - total flux cleaned = -0.00010865 Jy ! Component: 150 - total flux cleaned = -0.00010773 Jy ! Component: 200 - total flux cleaned = -0.000107112 Jy ! Total flux subtracted in 200 components = -0.000107112 Jy ! Clean residual min=-0.004238 max=0.003511 Jy/beam ! Clean residual mean=-0.000016 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.0919697 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.54184e-07 Jy ! Component: 100 - total flux cleaned = 1.19896e-06 Jy ! Component: 150 - total flux cleaned = -5.43135e-06 Jy ! Component: 200 - total flux cleaned = -1.17946e-05 Jy ! Total flux subtracted in 200 components = -1.17946e-05 Jy ! Clean residual min=-0.004248 max=0.003521 Jy/beam ! Clean residual mean=-0.000016 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.0919579 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.0919579 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.479 mas, bpa=-3.463 degrees ! Estimated noise=1251.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.90093e-05 Jy ! Component: 100 - total flux cleaned = -7.85447e-05 Jy ! Component: 150 - total flux cleaned = -3.07568e-05 Jy ! Component: 200 - total flux cleaned = -9.87156e-06 Jy ! Total flux subtracted in 200 components = -9.87156e-06 Jy ! Clean residual min=-0.003625 max=0.002960 Jy/beam ! Clean residual mean=-0.000006 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.091948 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.091948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148043Jy sigma=0.000654 ! Fit after self-cal, rms=0.148043Jy sigma=0.000654 wmodel J0058-3347_S_2017_03_27_pus_map.mod ! Writing 36 model components to file: J0058-3347_S_2017_03_27_pus_map.mod wobs J0058-3347_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0058-3347_S_2017_03_27_pus_uvs.fits wwins J0058-3347_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0058-3347_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138452 Jy ! Component: 100 - total flux cleaned = -0.00144033 Jy ! Component: 150 - total flux cleaned = -0.0012314 Jy ! Component: 200 - total flux cleaned = -0.00103252 Jy ! Component: 250 - total flux cleaned = -0.000936444 Jy ! Component: 300 - total flux cleaned = -0.000842873 Jy ! Component: 350 - total flux cleaned = -0.00070658 Jy ! Component: 400 - total flux cleaned = -0.000530165 Jy ! Component: 450 - total flux cleaned = -0.000272878 Jy ! Component: 500 - total flux cleaned = -6.41432e-05 Jy ! Component: 550 - total flux cleaned = 5.86554e-05 Jy ! Component: 600 - total flux cleaned = 0.000257127 Jy ! Component: 650 - total flux cleaned = 0.000295493 Jy ! Component: 700 - total flux cleaned = 0.000219477 Jy ! Component: 750 - total flux cleaned = 0.000219884 Jy ! Component: 800 - total flux cleaned = 0.000257522 Jy ! Component: 850 - total flux cleaned = 0.000366094 Jy ! Component: 900 - total flux cleaned = 0.000366045 Jy ! Component: 950 - total flux cleaned = 0.000470684 Jy ! Component: 1000 - total flux cleaned = 0.000436405 Jy ! Component: 1050 - total flux cleaned = 0.000605679 Jy ! Component: 1100 - total flux cleaned = 0.000571658 Jy ! Component: 1150 - total flux cleaned = 0.000637132 Jy ! Component: 1200 - total flux cleaned = 0.000765537 Jy ! Component: 1250 - total flux cleaned = 0.000701485 Jy ! Component: 1300 - total flux cleaned = 0.000764463 Jy ! Component: 1350 - total flux cleaned = 0.000795364 Jy ! Component: 1400 - total flux cleaned = 0.000795355 Jy ! Component: 1450 - total flux cleaned = 0.000856165 Jy ! Component: 1500 - total flux cleaned = 0.000975232 Jy ! Component: 1550 - total flux cleaned = 0.00103327 Jy ! Component: 1600 - total flux cleaned = 0.00103338 Jy ! Component: 1650 - total flux cleaned = 0.00100475 Jy ! Component: 1700 - total flux cleaned = 0.00109004 Jy ! Component: 1750 - total flux cleaned = 0.00111761 Jy ! Component: 1800 - total flux cleaned = 0.00106294 Jy ! Component: 1850 - total flux cleaned = 0.00103556 Jy ! Component: 1900 - total flux cleaned = 0.00100872 Jy ! Component: 1950 - total flux cleaned = 0.000982053 Jy ! Component: 2000 - total flux cleaned = 0.000903089 Jy ! Component: 2050 - total flux cleaned = 0.000902784 Jy ! Component: 2100 - total flux cleaned = 0.00074713 Jy ! Component: 2150 - total flux cleaned = 0.000747598 Jy ! Component: 2200 - total flux cleaned = 0.000721798 Jy ! Component: 2250 - total flux cleaned = 0.000570637 Jy ! Component: 2300 - total flux cleaned = 0.0005209 Jy ! Component: 2350 - total flux cleaned = 0.00049624 Jy ! Component: 2400 - total flux cleaned = 0.000447157 Jy ! Component: 2450 - total flux cleaned = 0.000326067 Jy ! Component: 2500 - total flux cleaned = 0.000325908 Jy ! Component: 2550 - total flux cleaned = 0.000254232 Jy ! Component: 2600 - total flux cleaned = 0.000183169 Jy ! Component: 2650 - total flux cleaned = 0.000112826 Jy ! Component: 2700 - total flux cleaned = 1.99131e-05 Jy ! Component: 2750 - total flux cleaned = -7.23012e-05 Jy ! Component: 2800 - total flux cleaned = -4.9015e-05 Jy ! Component: 2850 - total flux cleaned = -3.6722e-06 Jy ! Component: 2900 - total flux cleaned = -0.000139666 Jy ! Component: 2950 - total flux cleaned = -0.000161841 Jy ! Component: 3000 - total flux cleaned = -0.000183981 Jy ! Component: 3050 - total flux cleaned = -0.00022841 Jy ! Component: 3100 - total flux cleaned = -0.000337863 Jy ! Component: 3150 - total flux cleaned = -0.000424663 Jy ! Component: 3200 - total flux cleaned = -0.00042426 Jy ! Component: 3250 - total flux cleaned = -0.000445643 Jy ! Component: 3300 - total flux cleaned = -0.000509441 Jy ! Component: 3350 - total flux cleaned = -0.000615029 Jy ! Component: 3400 - total flux cleaned = -0.000656917 Jy ! Component: 3450 - total flux cleaned = -0.000677611 Jy ! Component: 3500 - total flux cleaned = -0.000656761 Jy ! Component: 3550 - total flux cleaned = -0.000759839 Jy ! Component: 3600 - total flux cleaned = -0.000841831 Jy ! Component: 3650 - total flux cleaned = -0.000760382 Jy ! Component: 3700 - total flux cleaned = -0.000921564 Jy ! Component: 3750 - total flux cleaned = -0.000861374 Jy ! Component: 3800 - total flux cleaned = -0.000940605 Jy ! Component: 3850 - total flux cleaned = -0.000921017 Jy ! Component: 3900 - total flux cleaned = -0.000940688 Jy ! Component: 3950 - total flux cleaned = -0.000960378 Jy ! Component: 4000 - total flux cleaned = -0.000960566 Jy ! Component: 4050 - total flux cleaned = -0.00105685 Jy ! Total flux subtracted in 4096 components = -0.00111418 Jy ! Clean residual min=-0.000954 max=0.001102 Jy/beam ! Clean residual mean=-0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0908339 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 324 components and 0.0908339 Jy ![Exited script file: muppet] wmap "J0058-3347_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.914 x 7.479 at -3.463 degrees (North through East) ! Clean map min=-0.0028211 max=0.09148 Jy/beam ! Writing clean map to FITS file: J0058-3347_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0914801 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349961 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14766 1.14766 2.29532 4.59064 9.18129 18.3626 36.7251 73.4503 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.914 x 7.479 at -3.463 degrees (North through East) ! Clean map min=-0.0028211 max=0.09148 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0058-3347_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:28:53 2019