! Started logfile: J0058-1829_S_2017_09_26_pus_uvs.log on Sat May 11 12:53:19 2019 obs J0058-1829_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0058-1829_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.509732 visibilities/baseline/integration-bin. ! Found source: J0058-1829 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 21580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0058-1829_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 822 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 999 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1812 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002797Jy sigma=0.007552 ! Fit after self-cal, rms=0.949002Jy sigma=0.007182 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=13.23 mas, bpa=-19.86 degrees ! Estimated noise=1586.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434654 Jy ! Component: 100 - total flux cleaned = 0.0524089 Jy ! Total flux subtracted in 100 components = 0.0524089 Jy ! Clean residual min=-0.003878 max=0.004137 Jy/beam ! Clean residual mean=0.000006 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.0524089 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0524089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090673Jy sigma=0.000621 ! Fit after self-cal, rms=0.089193Jy sigma=0.000610 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=16.36 mas, bpa=-18.1 degrees ! Estimated noise=763.958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172715 Jy ! Component: 100 - total flux cleaned = 0.00157396 Jy ! Component: 150 - total flux cleaned = 0.00137339 Jy ! Component: 200 - total flux cleaned = 0.00120264 Jy ! Total flux subtracted in 200 components = 0.00120264 Jy ! Clean residual min=-0.002236 max=0.002286 Jy/beam ! Clean residual mean=-0.000000 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0536115 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.0536115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088975Jy sigma=0.000609 ! Fit after self-cal, rms=0.088857Jy sigma=0.000609 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.93 HN 0.90 KP 0.95 ! LA 1.07 MK 1.07 NL 0.96 OV 1.10 ! PT 1.13 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.92 KP 0.98 ! LA 0.92 MK 1.02 NL 1.01 OV 1.14 ! PT 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 0.93 KP 1.00 ! LA 1.01 MK 1.06 NL 0.96 OV 1.03 ! PT 1.05 ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.82 KP 1.00* ! LA 0.91 MK 0.96 NL 1.00* OV 0.67 ! PT 0.89 ! ! ! Fit before self-cal, rms=0.088857Jy sigma=0.000609 ! Fit after self-cal, rms=0.084099Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=15.92 mas, bpa=-17.64 degrees ! Estimated noise=764.187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322712 Jy ! Component: 100 - total flux cleaned = 0.000226223 Jy ! Component: 150 - total flux cleaned = 0.000154605 Jy ! Component: 200 - total flux cleaned = 9.27462e-05 Jy ! Total flux subtracted in 200 components = 9.27462e-05 Jy ! Clean residual min=-0.001988 max=0.001759 Jy/beam ! Clean residual mean=0.000005 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0537042 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0537042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084076Jy sigma=0.000608 ! Fit after self-cal, rms=0.083872Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083872Jy sigma=0.000607 ! Fit after self-cal, rms=0.082888Jy sigma=0.000606 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=15.76 mas, bpa=-17.72 degrees ! Estimated noise=760.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168407 Jy ! Component: 100 - total flux cleaned = -0.000189272 Jy ! Component: 150 - total flux cleaned = -0.000170734 Jy ! Component: 200 - total flux cleaned = -0.000138717 Jy ! Total flux subtracted in 200 components = -0.000138717 Jy ! Clean residual min=-0.001772 max=0.001633 Jy/beam ! Clean residual mean=0.000004 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0535655 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0535655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082879Jy sigma=0.000606 ! Fit after self-cal, rms=0.082875Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234666 Jy ! Component: 100 - total flux cleaned = -0.000233946 Jy ! Component: 150 - total flux cleaned = -0.000233709 Jy ! Component: 200 - total flux cleaned = -0.000233684 Jy ! Total flux subtracted in 200 components = -0.000233684 Jy ! Clean residual min=-0.001754 max=0.001525 Jy/beam ! Clean residual mean=0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0533318 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.0533318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082867Jy sigma=0.000606 ! Fit after self-cal, rms=0.082857Jy sigma=0.000606 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082857Jy sigma=0.000606 ! Fit after self-cal, rms=0.082597Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=15.7 mas, bpa=-17.71 degrees ! Estimated noise=757.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189607 Jy ! Component: 100 - total flux cleaned = -0.000190639 Jy ! Component: 150 - total flux cleaned = -0.000174419 Jy ! Component: 200 - total flux cleaned = -0.000160112 Jy ! Total flux subtracted in 200 components = -0.000160112 Jy ! Clean residual min=-0.001756 max=0.001592 Jy/beam ! Clean residual mean=0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0531717 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0531717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082591Jy sigma=0.000606 ! Fit after self-cal, rms=0.082592Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.17525e-06 Jy ! Component: 100 - total flux cleaned = 1.52904e-05 Jy ! Component: 150 - total flux cleaned = 3.03568e-05 Jy ! Component: 200 - total flux cleaned = 4.3278e-05 Jy ! Total flux subtracted in 200 components = 4.3278e-05 Jy ! Clean residual min=-0.001741 max=0.001455 Jy/beam ! Clean residual mean=0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.053215 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.053215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082586Jy sigma=0.000606 ! Fit after self-cal, rms=0.082583Jy sigma=0.000606 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082583Jy sigma=0.000606 ! Fit after self-cal, rms=0.082359Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.311 mas, bmaj=22.58 mas, bpa=-6.463 degrees ! Estimated noise=877.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000380084 Jy ! Component: 100 - total flux cleaned = -0.000363291 Jy ! Component: 150 - total flux cleaned = -0.000355292 Jy ! Component: 200 - total flux cleaned = -0.000348053 Jy ! Total flux subtracted in 200 components = -0.000348053 Jy ! Clean residual min=-0.001991 max=0.001686 Jy/beam ! Clean residual mean=0.000005 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.052867 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.052867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082357Jy sigma=0.000606 ! Fit after self-cal, rms=0.082348Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122511 Jy ! Component: 100 - total flux cleaned = -0.00011449 Jy ! Component: 150 - total flux cleaned = -9.93997e-05 Jy ! Component: 200 - total flux cleaned = -7.86091e-05 Jy ! Total flux subtracted in 200 components = -7.86091e-05 Jy ! Clean residual min=-0.001898 max=0.001722 Jy/beam ! Clean residual mean=0.000004 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0527884 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.0527884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082347Jy sigma=0.000606 ! Fit after self-cal, rms=0.082345Jy sigma=0.000606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=15.67 mas, bpa=-17.71 degrees ! Estimated noise=755.458 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 15.67 at -17.71 degrees (North through East) ! Clean map min=-0.0035808 max=0.055928 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=12.64 mas, bpa=-19.62 degrees ! Estimated noise=1496.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429872 Jy ! Component: 100 - total flux cleaned = 0.0526246 Jy ! Component: 150 - total flux cleaned = 0.0530739 Jy ! Component: 200 - total flux cleaned = 0.0524887 Jy ! Total flux subtracted in 200 components = 0.0524887 Jy ! Clean residual min=-0.003273 max=0.002851 Jy/beam ! Clean residual mean=0.000004 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.0524887 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0524887 Jy ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=15.67 mas, bpa=-17.71 degrees ! Estimated noise=755.458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700709 Jy ! Component: 100 - total flux cleaned = 0.000592866 Jy ! Component: 150 - total flux cleaned = 0.00033712 Jy ! Component: 200 - total flux cleaned = 0.000229616 Jy ! Total flux subtracted in 200 components = 0.000229616 Jy ! Clean residual min=-0.001809 max=0.001715 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0527183 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.0527183 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.311 mas, bmaj=22.58 mas, bpa=-6.463 degrees ! Estimated noise=877.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105439 Jy ! Component: 100 - total flux cleaned = -0.000137681 Jy ! Component: 150 - total flux cleaned = -0.000137662 Jy ! Component: 200 - total flux cleaned = -0.000137408 Jy ! Total flux subtracted in 200 components = -0.000137408 Jy ! Clean residual min=-0.001969 max=0.001722 Jy/beam ! Clean residual mean=0.000003 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0525809 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.40984e-07 Jy ! Component: 100 - total flux cleaned = 1.42145e-05 Jy ! Component: 150 - total flux cleaned = 1.44411e-05 Jy ! Component: 200 - total flux cleaned = 1.4268e-05 Jy ! Total flux subtracted in 200 components = 1.4268e-05 Jy ! Clean residual min=-0.001956 max=0.001718 Jy/beam ! Clean residual mean=0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0525951 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.0525951 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=15.67 mas, bpa=-17.71 degrees ! Estimated noise=755.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.38512e-05 Jy ! Component: 100 - total flux cleaned = -3.02067e-05 Jy ! Component: 150 - total flux cleaned = -9.34995e-06 Jy ! Component: 200 - total flux cleaned = 1.08691e-05 Jy ! Total flux subtracted in 200 components = 1.08691e-05 Jy ! Clean residual min=-0.001718 max=0.001579 Jy/beam ! Clean residual mean=0.000002 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.052606 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.052606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082355Jy sigma=0.000606 ! Fit after self-cal, rms=0.082359Jy sigma=0.000606 wmodel J0058-1829_S_2017_09_26_pus_map.mod ! Writing 47 model components to file: J0058-1829_S_2017_09_26_pus_map.mod wobs J0058-1829_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0058-1829_S_2017_09_26_pus_uvs.fits wwins J0058-1829_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0058-1829_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000484816 Jy ! Component: 100 - total flux cleaned = -0.000675801 Jy ! Component: 150 - total flux cleaned = -0.000907415 Jy ! Component: 200 - total flux cleaned = -0.00112694 Jy ! Component: 250 - total flux cleaned = -0.00135895 Jy ! Component: 300 - total flux cleaned = -0.00153554 Jy ! Component: 350 - total flux cleaned = -0.00168387 Jy ! Component: 400 - total flux cleaned = -0.00176606 Jy ! Component: 450 - total flux cleaned = -0.0018646 Jy ! Component: 500 - total flux cleaned = -0.00182633 Jy ! Component: 550 - total flux cleaned = -0.00186275 Jy ! Component: 600 - total flux cleaned = -0.00184479 Jy ! Component: 650 - total flux cleaned = -0.00188012 Jy ! Component: 700 - total flux cleaned = -0.00194865 Jy ! Component: 750 - total flux cleaned = -0.00206431 Jy ! Component: 800 - total flux cleaned = -0.00211244 Jy ! Component: 850 - total flux cleaned = -0.00225501 Jy ! Component: 900 - total flux cleaned = -0.00233261 Jy ! Component: 950 - total flux cleaned = -0.00237826 Jy ! Component: 1000 - total flux cleaned = -0.0023937 Jy ! Component: 1050 - total flux cleaned = -0.00246683 Jy ! Component: 1100 - total flux cleaned = -0.00252392 Jy ! Component: 1150 - total flux cleaned = -0.00256616 Jy ! Component: 1200 - total flux cleaned = -0.00263542 Jy ! Component: 1250 - total flux cleaned = -0.00273029 Jy ! Component: 1300 - total flux cleaned = -0.00273014 Jy ! Component: 1350 - total flux cleaned = -0.0027566 Jy ! Component: 1400 - total flux cleaned = -0.00282108 Jy ! Component: 1450 - total flux cleaned = -0.00285902 Jy ! Component: 1500 - total flux cleaned = -0.00290875 Jy ! Component: 1550 - total flux cleaned = -0.00293294 Jy ! Component: 1600 - total flux cleaned = -0.0029689 Jy ! Component: 1650 - total flux cleaned = -0.00294498 Jy ! Component: 1700 - total flux cleaned = -0.00289797 Jy ! Component: 1750 - total flux cleaned = -0.00285195 Jy ! Component: 1800 - total flux cleaned = -0.00277267 Jy ! Component: 1850 - total flux cleaned = -0.00271693 Jy ! Component: 1900 - total flux cleaned = -0.00266194 Jy ! Component: 1950 - total flux cleaned = -0.0025966 Jy ! Component: 2000 - total flux cleaned = -0.00257517 Jy ! Component: 2050 - total flux cleaned = -0.00249058 Jy ! Component: 2100 - total flux cleaned = -0.00242771 Jy ! Component: 2150 - total flux cleaned = -0.00234484 Jy ! Component: 2200 - total flux cleaned = -0.00227328 Jy ! Component: 2250 - total flux cleaned = -0.00219242 Jy ! Component: 2300 - total flux cleaned = -0.00212253 Jy ! Component: 2350 - total flux cleaned = -0.00204357 Jy ! Component: 2400 - total flux cleaned = -0.00198495 Jy ! Component: 2450 - total flux cleaned = -0.0018981 Jy ! Component: 2500 - total flux cleaned = -0.00183121 Jy ! Component: 2550 - total flux cleaned = -0.00177437 Jy ! Component: 2600 - total flux cleaned = -0.00169016 Jy ! Component: 2650 - total flux cleaned = -0.00164384 Jy ! Component: 2700 - total flux cleaned = -0.00157051 Jy ! Component: 2750 - total flux cleaned = -0.00151581 Jy ! Component: 2800 - total flux cleaned = -0.0014438 Jy ! Component: 2850 - total flux cleaned = -0.00138147 Jy ! Component: 2900 - total flux cleaned = -0.00132845 Jy ! Component: 2950 - total flux cleaned = -0.00126718 Jy ! Component: 3000 - total flux cleaned = -0.0011632 Jy ! Component: 3050 - total flux cleaned = -0.00110327 Jy ! Component: 3100 - total flux cleaned = -0.00104386 Jy ! Component: 3150 - total flux cleaned = -0.000984835 Jy ! Component: 3200 - total flux cleaned = -0.000934762 Jy ! Component: 3250 - total flux cleaned = -0.000860201 Jy ! Component: 3300 - total flux cleaned = -0.000819133 Jy ! Component: 3350 - total flux cleaned = -0.000745753 Jy ! Component: 3400 - total flux cleaned = -0.000697191 Jy ! Component: 3450 - total flux cleaned = -0.000640868 Jy ! Component: 3500 - total flux cleaned = -0.000529212 Jy ! Component: 3550 - total flux cleaned = -0.000481676 Jy ! Component: 3600 - total flux cleaned = -0.000418725 Jy ! Component: 3650 - total flux cleaned = -0.000356035 Jy ! Component: 3700 - total flux cleaned = -0.000270379 Jy ! Component: 3750 - total flux cleaned = -0.000185226 Jy ! Component: 3800 - total flux cleaned = -0.000108269 Jy ! Component: 3850 - total flux cleaned = -2.41205e-05 Jy ! Component: 3900 - total flux cleaned = 2.15659e-05 Jy ! Component: 3950 - total flux cleaned = 9.72943e-05 Jy ! Component: 4000 - total flux cleaned = 0.000172601 Jy ! Component: 4050 - total flux cleaned = 0.000232553 Jy ! Total flux subtracted in 4096 components = 0.000307059 Jy ! Clean residual min=-0.000453 max=0.000542 Jy/beam ! Clean residual mean=0.000002 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.0529131 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 293 components and 0.0529131 Jy ![Exited script file: muppet] wmap "J0058-1829_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 15.67 at -17.71 degrees (North through East) ! Clean map min=-0.0033302 max=0.055348 Jy/beam ! Writing clean map to FITS file: J0058-1829_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0553479 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127441 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.690766 0.690766 1.38153 2.76306 5.52613 11.0523 22.1045 44.209 88.4181 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 15.67 at -17.71 degrees (North through East) ! Clean map min=-0.0033302 max=0.055348 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0058-1829_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:53:24 2019