! Started logfile: J0053-0727_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:20 2019 obs J0053-0727_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0053-0727_S_2017_06_10_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967355 visibilities/baseline/integration-bin. ! Found source: J0053-0727 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0053-0727_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 624 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.896881Jy sigma=0.007995 ! Fit after self-cal, rms=0.885123Jy sigma=0.007898 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=7.052 mas, bpa=-6.362 degrees ! Estimated noise=903.995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884034 Jy ! Component: 100 - total flux cleaned = 0.120149 Jy ! Total flux subtracted in 100 components = 0.120149 Jy ! Clean residual min=-0.005514 max=0.015185 Jy/beam ! Clean residual mean=-0.000021 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.120149 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.120149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087412Jy sigma=0.000745 ! Fit after self-cal, rms=0.087207Jy sigma=0.000743 ! Inverting map ! Added new window around map position (-0.5, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183071 Jy ! Component: 100 - total flux cleaned = 0.0297356 Jy ! Total flux subtracted in 100 components = 0.0297356 Jy ! Clean residual min=-0.004502 max=0.006069 Jy/beam ! Clean residual mean=-0.000010 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.149885 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.149885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081971Jy sigma=0.000694 ! Fit after self-cal, rms=0.081775Jy sigma=0.000692 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883598 Jy ! Component: 100 - total flux cleaned = 0.0142051 Jy ! Total flux subtracted in 100 components = 0.0142051 Jy ! Clean residual min=-0.003662 max=0.003357 Jy/beam ! Clean residual mean=-0.000005 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.16409 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.16409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080568Jy sigma=0.000682 ! Fit after self-cal, rms=0.080489Jy sigma=0.000681 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457533 Jy ! Component: 100 - total flux cleaned = 0.00719703 Jy ! Total flux subtracted in 100 components = 0.00719703 Jy ! Clean residual min=-0.003177 max=0.003210 Jy/beam ! Clean residual mean=-0.000002 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.171287 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.171287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080194Jy sigma=0.000679 ! Fit after self-cal, rms=0.080161Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=8.192 mas, bpa=-5.254 degrees ! Estimated noise=687.703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210027 Jy ! Component: 100 - total flux cleaned = 0.00242584 Jy ! Component: 150 - total flux cleaned = 0.00249069 Jy ! Component: 200 - total flux cleaned = 0.00249304 Jy ! Total flux subtracted in 200 components = 0.00249304 Jy ! Clean residual min=-0.002480 max=0.002200 Jy/beam ! Clean residual mean=0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.17378 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.17378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080086Jy sigma=0.000678 ! Fit after self-cal, rms=0.080075Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.98 KP 1.03 ! LA 1.05 MK 0.98 NL 0.90 OV 1.02 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.03 KP 1.00 ! LA 0.97 MK 0.96 NL 1.07 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.98 KP 1.01 ! LA 0.98 MK 1.01 NL 1.02 OV 0.94 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.96 KP 1.00* ! LA 0.88 MK 1.21 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.080075Jy sigma=0.000678 ! Fit after self-cal, rms=0.078720Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.133 mas, bpa=-4.902 degrees ! Estimated noise=683.282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467528 Jy ! Component: 100 - total flux cleaned = 0.000446501 Jy ! Component: 150 - total flux cleaned = 0.000427774 Jy ! Component: 200 - total flux cleaned = 0.000396322 Jy ! Total flux subtracted in 200 components = 0.000396322 Jy ! Clean residual min=-0.002162 max=0.002036 Jy/beam ! Clean residual mean=0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.174176 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.174176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078706Jy sigma=0.000675 ! Fit after self-cal, rms=0.078695Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078695Jy sigma=0.000675 ! Fit after self-cal, rms=0.077778Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.076 mas, bpa=-4.578 degrees ! Estimated noise=680.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364641 Jy ! Component: 100 - total flux cleaned = 0.000447441 Jy ! Component: 150 - total flux cleaned = 0.000501118 Jy ! Component: 200 - total flux cleaned = 0.000524572 Jy ! Total flux subtracted in 200 components = 0.000524572 Jy ! Clean residual min=-0.001817 max=0.001686 Jy/beam ! Clean residual mean=-0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.174701 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.174701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077768Jy sigma=0.000672 ! Fit after self-cal, rms=0.077774Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.53389e-05 Jy ! Component: 100 - total flux cleaned = 7.02409e-05 Jy ! Component: 150 - total flux cleaned = 7.0016e-05 Jy ! Component: 200 - total flux cleaned = 6.03513e-05 Jy ! Total flux subtracted in 200 components = 6.03513e-05 Jy ! Clean residual min=-0.001824 max=0.001683 Jy/beam ! Clean residual mean=0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.174761 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.174761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077769Jy sigma=0.000672 ! Fit after self-cal, rms=0.077767Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077767Jy sigma=0.000672 ! Fit after self-cal, rms=0.077669Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.049 mas, bpa=-4.371 degrees ! Estimated noise=679.231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.63786e-05 Jy ! Component: 100 - total flux cleaned = 8.31371e-05 Jy ! Component: 150 - total flux cleaned = 0.000119845 Jy ! Component: 200 - total flux cleaned = 0.000130811 Jy ! Total flux subtracted in 200 components = 0.000130811 Jy ! Clean residual min=-0.001781 max=0.001621 Jy/beam ! Clean residual mean=0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.174892 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.174892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077664Jy sigma=0.000671 ! Fit after self-cal, rms=0.077667Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.38551e-05 Jy ! Component: 100 - total flux cleaned = 3.18851e-05 Jy ! Component: 150 - total flux cleaned = 3.21837e-05 Jy ! Component: 200 - total flux cleaned = 3.25182e-05 Jy ! Total flux subtracted in 200 components = 3.25182e-05 Jy ! Clean residual min=-0.001788 max=0.001617 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.174925 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.174925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077663Jy sigma=0.000671 ! Fit after self-cal, rms=0.077662Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077662Jy sigma=0.000671 ! Fit after self-cal, rms=0.077605Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.284 mas, bmaj=14.43 mas, bpa=-4.061 degrees ! Estimated noise=890.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140038 Jy ! Component: 100 - total flux cleaned = -0.0001088 Jy ! Component: 150 - total flux cleaned = -7.67275e-05 Jy ! Component: 200 - total flux cleaned = -7.68981e-05 Jy ! Total flux subtracted in 200 components = -7.68981e-05 Jy ! Clean residual min=-0.001793 max=0.001869 Jy/beam ! Clean residual mean=0.000000 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.174848 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.174848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077604Jy sigma=0.000671 ! Fit after self-cal, rms=0.077605Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.41038e-05 Jy ! Component: 100 - total flux cleaned = -1.10908e-05 Jy ! Component: 150 - total flux cleaned = -1.05679e-05 Jy ! Component: 200 - total flux cleaned = -1.84055e-05 Jy ! Total flux subtracted in 200 components = -1.84055e-05 Jy ! Clean residual min=-0.001777 max=0.001863 Jy/beam ! Clean residual mean=0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.174829 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.174829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077604Jy sigma=0.000671 ! Fit after self-cal, rms=0.077603Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.038 mas, bpa=-4.248 degrees ! Estimated noise=678.558 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 8.038 at -4.248 degrees (North through East) ! Clean map min=-0.0017041 max=0.11196 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=6.932 mas, bpa=-5.309 degrees ! Estimated noise=888.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.087183 Jy ! Component: 100 - total flux cleaned = 0.122011 Jy ! Component: 150 - total flux cleaned = 0.141498 Jy ! Component: 200 - total flux cleaned = 0.153444 Jy ! Total flux subtracted in 200 components = 0.153444 Jy ! Clean residual min=-0.003068 max=0.006296 Jy/beam ! Clean residual mean=-0.000009 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.153444 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.153444 Jy ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.038 mas, bpa=-4.248 degrees ! Estimated noise=678.558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00988448 Jy ! Component: 100 - total flux cleaned = 0.0151783 Jy ! Component: 150 - total flux cleaned = 0.0181069 Jy ! Component: 200 - total flux cleaned = 0.0198262 Jy ! Total flux subtracted in 200 components = 0.0198262 Jy ! Clean residual min=-0.001801 max=0.001560 Jy/beam ! Clean residual mean=-0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.17327 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.17327 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.284 mas, bmaj=14.43 mas, bpa=-4.061 degrees ! Estimated noise=890.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130254 Jy ! Component: 100 - total flux cleaned = 0.00153371 Jy ! Component: 150 - total flux cleaned = 0.00158737 Jy ! Component: 200 - total flux cleaned = 0.00163135 Jy ! Total flux subtracted in 200 components = 0.00163135 Jy ! Clean residual min=-0.001812 max=0.001855 Jy/beam ! Clean residual mean=-0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.174901 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51095e-05 Jy ! Component: 100 - total flux cleaned = 4.70455e-05 Jy ! Component: 150 - total flux cleaned = 4.71268e-05 Jy ! Component: 200 - total flux cleaned = 4.73601e-05 Jy ! Total flux subtracted in 200 components = 4.73601e-05 Jy ! Clean residual min=-0.001798 max=0.001856 Jy/beam ! Clean residual mean=-0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.174949 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.174949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=8.038 mas, bpa=-4.248 degrees ! Estimated noise=678.558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119658 Jy ! Component: 100 - total flux cleaned = 0.000117458 Jy ! Component: 150 - total flux cleaned = 0.000174908 Jy ! Component: 200 - total flux cleaned = 0.000210317 Jy ! Total flux subtracted in 200 components = 0.000210317 Jy ! Clean residual min=-0.001703 max=0.001586 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.175159 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.175159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077608Jy sigma=0.000671 ! Fit after self-cal, rms=0.077596Jy sigma=0.000671 wmodel J0053-0727_S_2017_06_10_pus_map.mod ! Writing 76 model components to file: J0053-0727_S_2017_06_10_pus_map.mod wobs J0053-0727_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0053-0727_S_2017_06_10_pus_uvs.fits wwins J0053-0727_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0053-0727_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222102 Jy ! Component: 100 - total flux cleaned = -0.000505973 Jy ! Component: 150 - total flux cleaned = -0.000831734 Jy ! Component: 200 - total flux cleaned = -0.0011196 Jy ! Component: 250 - total flux cleaned = -0.00142348 Jy ! Component: 300 - total flux cleaned = -0.00171906 Jy ! Component: 350 - total flux cleaned = -0.00188739 Jy ! Component: 400 - total flux cleaned = -0.00207565 Jy ! Component: 450 - total flux cleaned = -0.00225938 Jy ! Component: 500 - total flux cleaned = -0.0022816 Jy ! Component: 550 - total flux cleaned = -0.00234827 Jy ! Component: 600 - total flux cleaned = -0.00239178 Jy ! Component: 650 - total flux cleaned = -0.00243386 Jy ! Component: 700 - total flux cleaned = -0.00241272 Jy ! Component: 750 - total flux cleaned = -0.00243383 Jy ! Component: 800 - total flux cleaned = -0.00251507 Jy ! Component: 850 - total flux cleaned = -0.00257457 Jy ! Component: 900 - total flux cleaned = -0.00257463 Jy ! Component: 950 - total flux cleaned = -0.00267171 Jy ! Component: 1000 - total flux cleaned = -0.00267139 Jy ! Component: 1050 - total flux cleaned = -0.0026716 Jy ! Component: 1100 - total flux cleaned = -0.00274603 Jy ! Component: 1150 - total flux cleaned = -0.00274603 Jy ! Component: 1200 - total flux cleaned = -0.00281896 Jy ! Component: 1250 - total flux cleaned = -0.00285499 Jy ! Component: 1300 - total flux cleaned = -0.00297905 Jy ! Component: 1350 - total flux cleaned = -0.00299635 Jy ! Component: 1400 - total flux cleaned = -0.00301402 Jy ! Component: 1450 - total flux cleaned = -0.00309979 Jy ! Component: 1500 - total flux cleaned = -0.00315076 Jy ! Component: 1550 - total flux cleaned = -0.00321815 Jy ! Component: 1600 - total flux cleaned = -0.00331791 Jy ! Component: 1650 - total flux cleaned = -0.00343264 Jy ! Component: 1700 - total flux cleaned = -0.00343253 Jy ! Component: 1750 - total flux cleaned = -0.00354554 Jy ! Component: 1800 - total flux cleaned = -0.00354541 Jy ! Component: 1850 - total flux cleaned = -0.00368754 Jy ! Component: 1900 - total flux cleaned = -0.00381275 Jy ! Component: 1950 - total flux cleaned = -0.00385907 Jy ! Component: 2000 - total flux cleaned = -0.00398182 Jy ! Component: 2050 - total flux cleaned = -0.00408808 Jy ! Component: 2100 - total flux cleaned = -0.00416345 Jy ! Component: 2150 - total flux cleaned = -0.00422315 Jy ! Component: 2200 - total flux cleaned = -0.00434163 Jy ! Component: 2250 - total flux cleaned = -0.00444458 Jy ! Component: 2300 - total flux cleaned = -0.00450266 Jy ! Component: 2350 - total flux cleaned = -0.00457495 Jy ! Component: 2400 - total flux cleaned = -0.00466097 Jy ! Component: 2450 - total flux cleaned = -0.0047747 Jy ! Component: 2500 - total flux cleaned = -0.00487365 Jy ! Component: 2550 - total flux cleaned = -0.00499942 Jy ! Component: 2600 - total flux cleaned = -0.00509641 Jy ! Component: 2650 - total flux cleaned = -0.00520631 Jy ! Component: 2700 - total flux cleaned = -0.0052334 Jy ! Component: 2750 - total flux cleaned = -0.0053417 Jy ! Component: 2800 - total flux cleaned = -0.00538192 Jy ! Component: 2850 - total flux cleaned = -0.00547534 Jy ! Component: 2900 - total flux cleaned = -0.00550189 Jy ! Component: 2950 - total flux cleaned = -0.00555451 Jy ! Component: 3000 - total flux cleaned = -0.00568504 Jy ! Component: 3050 - total flux cleaned = -0.00574983 Jy ! Component: 3100 - total flux cleaned = -0.00582711 Jy ! Component: 3150 - total flux cleaned = -0.00587826 Jy ! Component: 3200 - total flux cleaned = -0.00596703 Jy ! Component: 3250 - total flux cleaned = -0.00601726 Jy ! Component: 3300 - total flux cleaned = -0.00604222 Jy ! Component: 3350 - total flux cleaned = -0.00610448 Jy ! Component: 3400 - total flux cleaned = -0.00614135 Jy ! Component: 3450 - total flux cleaned = -0.00616597 Jy ! Component: 3500 - total flux cleaned = -0.00627554 Jy ! Component: 3550 - total flux cleaned = -0.00625141 Jy ! Component: 3600 - total flux cleaned = -0.00625157 Jy ! Component: 3650 - total flux cleaned = -0.0063232 Jy ! Component: 3700 - total flux cleaned = -0.0063707 Jy ! Component: 3750 - total flux cleaned = -0.00642948 Jy ! Component: 3800 - total flux cleaned = -0.00641751 Jy ! Component: 3850 - total flux cleaned = -0.00645239 Jy ! Component: 3900 - total flux cleaned = -0.00645253 Jy ! Component: 3950 - total flux cleaned = -0.00650999 Jy ! Component: 4000 - total flux cleaned = -0.0065899 Jy ! Component: 4050 - total flux cleaned = -0.0066125 Jy ! Total flux subtracted in 4096 components = -0.00660117 Jy ! Clean residual min=-0.000851 max=0.000683 Jy/beam ! Clean residual mean=-0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.168558 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 353 components and 0.168558 Jy ![Exited script file: muppet] wmap "J0053-0727_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 8.038 at -4.248 degrees (North through East) ! Clean map min=-0.0012472 max=0.11161 Jy/beam ! Writing clean map to FITS file: J0053-0727_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206409 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.554792 0.554792 1.10958 2.21917 4.43833 8.87667 17.7533 35.5067 71.0133 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 8.038 at -4.248 degrees (North through East) ! Clean map min=-0.0012472 max=0.11161 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0053-0727_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:26 2019