! Started logfile: J0051-4226_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:15 2019 obs J0051-4226_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0051-4226_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.38 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0051-4226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0051-4226_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.358782Jy sigma=0.002415 ! Fit after self-cal, rms=0.349738Jy sigma=0.002355 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.268 mas, bmaj=6.707 mas, bpa=-3.068 degrees ! Estimated noise=5736.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.511229 Jy ! Component: 100 - total flux cleaned = 0.622959 Jy ! Total flux subtracted in 100 components = 0.622959 Jy ! Clean residual min=-0.022382 max=0.035487 Jy/beam ! Clean residual mean=-0.000455 rms=0.007819 Jy/beam ! Combined flux in latest and established models = 0.622959 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.622959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126715Jy sigma=0.000834 ! Fit after self-cal, rms=0.126692Jy sigma=0.000834 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=7.501 mas, bpa=-1.992 degrees ! Estimated noise=4553.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05151 Jy ! Component: 100 - total flux cleaned = 0.077616 Jy ! Component: 150 - total flux cleaned = 0.0910234 Jy ! Component: 200 - total flux cleaned = 0.0979422 Jy ! Total flux subtracted in 200 components = 0.0979422 Jy ! Clean residual min=-0.014773 max=0.013457 Jy/beam ! Clean residual mean=-0.000293 rms=0.003988 Jy/beam ! Combined flux in latest and established models = 0.720901 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 35 components and 0.720902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104928Jy sigma=0.000695 ! Fit after self-cal, rms=0.104937Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.02 ! LA 0.99 MK 1.02 NL 1.00* OV 1.01 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.01 ! LA 0.93 MK 0.99 NL 1.00* OV 1.05 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.96 ! LA 0.98 MK 1.01 NL 1.00* OV 0.93 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104937Jy sigma=0.000695 ! Fit after self-cal, rms=0.098954Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.556 mas, bpa=-0.6801 degrees ! Estimated noise=4641.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000791117 Jy ! Component: 100 - total flux cleaned = 0.000800631 Jy ! Component: 150 - total flux cleaned = 0.00074673 Jy ! Component: 200 - total flux cleaned = 0.000698848 Jy ! Total flux subtracted in 200 components = 0.000698848 Jy ! Clean residual min=-0.009683 max=0.011759 Jy/beam ! Clean residual mean=-0.000038 rms=0.002737 Jy/beam ! Combined flux in latest and established models = 0.7216 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.7216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098929Jy sigma=0.000659 ! Fit after self-cal, rms=0.098924Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098924Jy sigma=0.000659 ! Fit after self-cal, rms=0.098882Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=7.553 mas, bpa=-0.6884 degrees ! Estimated noise=4639.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272432 Jy ! Component: 100 - total flux cleaned = 0.000317535 Jy ! Component: 150 - total flux cleaned = 0.000335214 Jy ! Component: 200 - total flux cleaned = 0.000352998 Jy ! Total flux subtracted in 200 components = 0.000352998 Jy ! Clean residual min=-0.009618 max=0.011796 Jy/beam ! Clean residual mean=-0.000037 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.721953 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.721953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098872Jy sigma=0.000659 ! Fit after self-cal, rms=0.098872Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (94.5, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756664 Jy ! Component: 100 - total flux cleaned = 0.00753288 Jy ! Component: 150 - total flux cleaned = 0.00729884 Jy ! Component: 200 - total flux cleaned = 0.00729927 Jy ! Total flux subtracted in 200 components = 0.00729927 Jy ! Clean residual min=-0.008508 max=0.008825 Jy/beam ! Clean residual mean=-0.000086 rms=0.002433 Jy/beam ! Combined flux in latest and established models = 0.729253 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.729253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097905Jy sigma=0.000653 ! Fit after self-cal, rms=0.097833Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097833Jy sigma=0.000653 ! Fit after self-cal, rms=0.097679Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=7.551 mas, bpa=-0.7375 degrees ! Estimated noise=4633.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020144 Jy ! Component: 100 - total flux cleaned = 0.0021893 Jy ! Component: 150 - total flux cleaned = 0.00219189 Jy ! Component: 200 - total flux cleaned = 0.00233474 Jy ! Total flux subtracted in 200 components = 0.00233474 Jy ! Clean residual min=-0.008191 max=0.008510 Jy/beam ! Clean residual mean=-0.000077 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.731587 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.731587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097524Jy sigma=0.000651 ! Fit after self-cal, rms=0.097512Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000452273 Jy ! Component: 100 - total flux cleaned = 0.000581895 Jy ! Component: 150 - total flux cleaned = 0.000758605 Jy ! Component: 200 - total flux cleaned = 0.000865755 Jy ! Total flux subtracted in 200 components = 0.000865755 Jy ! Clean residual min=-0.008236 max=0.008657 Jy/beam ! Clean residual mean=-0.000074 rms=0.002319 Jy/beam ! Combined flux in latest and established models = 0.732453 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.732453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097444Jy sigma=0.000651 ! Fit after self-cal, rms=0.097440Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097440Jy sigma=0.000651 ! Fit after self-cal, rms=0.097465Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.689 mas, bmaj=28.67 mas, bpa=0.2445 degrees ! Estimated noise=6567.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000763691 Jy ! Component: 100 - total flux cleaned = -0.0008615 Jy ! Component: 150 - total flux cleaned = -0.000863408 Jy ! Component: 200 - total flux cleaned = -0.000867181 Jy ! Total flux subtracted in 200 components = -0.000867181 Jy ! Clean residual min=-0.006223 max=0.007703 Jy/beam ! Clean residual mean=-0.000158 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.731586 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 86 components and 0.731586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097458Jy sigma=0.000651 ! Fit after self-cal, rms=0.097455Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137227 Jy ! Component: 100 - total flux cleaned = 0.000135132 Jy ! Component: 150 - total flux cleaned = 0.000130067 Jy ! Component: 200 - total flux cleaned = 0.000128262 Jy ! Total flux subtracted in 200 components = 0.000128262 Jy ! Clean residual min=-0.006164 max=0.007566 Jy/beam ! Clean residual mean=-0.000162 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 0.731714 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 88 components and 0.731714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097457Jy sigma=0.000651 ! Fit after self-cal, rms=0.097455Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=7.55 mas, bpa=-0.7508 degrees ! Estimated noise=4634.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.64 x 7.55 at -0.7508 degrees (North through East) ! Clean map min=-0.0081061 max=0.66234 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097455Jy sigma=0.000651 ! Fit after self-cal, rms=0.087743Jy sigma=0.000586 ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=7.552 mas, bpa=-0.7729 degrees ! Estimated noise=4636.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192904 Jy ! Component: 100 - total flux cleaned = 0.00247392 Jy ! Component: 150 - total flux cleaned = 0.00273413 Jy ! Component: 200 - total flux cleaned = 0.00292046 Jy ! Total flux subtracted in 200 components = 0.00292046 Jy ! Clean residual min=-0.009345 max=0.008963 Jy/beam ! Clean residual mean=-0.000076 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.734635 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.734635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087653Jy sigma=0.000586 ! Fit after self-cal, rms=0.087646Jy sigma=0.000586 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354983 Jy ! Component: 100 - total flux cleaned = 0.000484793 Jy ! Component: 150 - total flux cleaned = 0.000484388 Jy ! Component: 200 - total flux cleaned = 0.000522262 Jy ! Total flux subtracted in 200 components = 0.000522262 Jy ! Clean residual min=-0.009217 max=0.008990 Jy/beam ! Clean residual mean=-0.000074 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.735157 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 101 components and 0.735157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087609Jy sigma=0.000585 ! Fit after self-cal, rms=0.087606Jy sigma=0.000585 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087606Jy sigma=0.000585 ! Fit after self-cal, rms=0.087624Jy sigma=0.000585 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=6.733 mas, bpa=-2.284 degrees ! Estimated noise=5818.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.506612 Jy ! Component: 100 - total flux cleaned = 0.617481 Jy ! Component: 150 - total flux cleaned = 0.656216 Jy ! Component: 200 - total flux cleaned = 0.681079 Jy ! Total flux subtracted in 200 components = 0.681079 Jy ! Clean residual min=-0.013135 max=0.018138 Jy/beam ! Clean residual mean=-0.000169 rms=0.004316 Jy/beam ! Combined flux in latest and established models = 0.681079 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.681079 Jy ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=7.551 mas, bpa=-0.7749 degrees ! Estimated noise=4638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227618 Jy ! Component: 100 - total flux cleaned = 0.0358105 Jy ! Component: 150 - total flux cleaned = 0.0437019 Jy ! Component: 200 - total flux cleaned = 0.0463852 Jy ! Total flux subtracted in 200 components = 0.0463852 Jy ! Clean residual min=-0.008602 max=0.009593 Jy/beam ! Clean residual mean=-0.000116 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.727464 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 64 components and 0.727464 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.689 mas, bmaj=28.67 mas, bpa=0.2478 degrees ! Estimated noise=6570.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571934 Jy ! Component: 100 - total flux cleaned = 0.00687283 Jy ! Component: 150 - total flux cleaned = 0.00709252 Jy ! Component: 200 - total flux cleaned = 0.00729164 Jy ! Total flux subtracted in 200 components = 0.00729164 Jy ! Clean residual min=-0.006141 max=0.008099 Jy/beam ! Clean residual mean=-0.000167 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 0.734756 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175315 Jy ! Component: 100 - total flux cleaned = 0.000280496 Jy ! Component: 150 - total flux cleaned = 0.000371446 Jy ! Component: 200 - total flux cleaned = 0.000371412 Jy ! Total flux subtracted in 200 components = 0.000371412 Jy ! Clean residual min=-0.005682 max=0.008057 Jy/beam ! Clean residual mean=-0.000163 rms=0.002636 Jy/beam ! Combined flux in latest and established models = 0.735127 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.735127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=7.551 mas, bpa=-0.7749 degrees ! Estimated noise=4638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101743 Jy ! Component: 100 - total flux cleaned = 0.00103212 Jy ! Component: 150 - total flux cleaned = 0.000927475 Jy ! Component: 200 - total flux cleaned = 0.00101791 Jy ! Total flux subtracted in 200 components = 0.00101791 Jy ! Clean residual min=-0.009048 max=0.008985 Jy/beam ! Clean residual mean=-0.000078 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 0.736145 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.736145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087813Jy sigma=0.000587 ! Fit after self-cal, rms=0.087777Jy sigma=0.000586 wmodel J0051-4226_S_2017_06_10_pus_map.mod ! Writing 107 model components to file: J0051-4226_S_2017_06_10_pus_map.mod wobs J0051-4226_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0051-4226_S_2017_06_10_pus_uvs.fits wwins J0051-4226_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0051-4226_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018232 Jy ! Component: 100 - total flux cleaned = 0.00307225 Jy ! Component: 150 - total flux cleaned = 0.0033302 Jy ! Component: 200 - total flux cleaned = 0.00299632 Jy ! Component: 250 - total flux cleaned = 0.0027901 Jy ! Component: 300 - total flux cleaned = 0.00289089 Jy ! Component: 350 - total flux cleaned = 0.00308057 Jy ! Component: 400 - total flux cleaned = 0.0029883 Jy ! Component: 450 - total flux cleaned = 0.00281239 Jy ! Component: 500 - total flux cleaned = 0.00272735 Jy ! Component: 550 - total flux cleaned = 0.00272662 Jy ! Component: 600 - total flux cleaned = 0.00264648 Jy ! Component: 650 - total flux cleaned = 0.00241601 Jy ! Component: 700 - total flux cleaned = 0.00197649 Jy ! Component: 750 - total flux cleaned = 0.00183461 Jy ! Component: 800 - total flux cleaned = 0.00155834 Jy ! Component: 850 - total flux cleaned = 0.00115437 Jy ! Component: 900 - total flux cleaned = 0.000956486 Jy ! Component: 950 - total flux cleaned = 0.000698218 Jy ! Component: 1000 - total flux cleaned = 0.000508314 Jy ! Component: 1050 - total flux cleaned = 0.000260461 Jy ! Component: 1100 - total flux cleaned = 7.85259e-05 Jy ! Component: 1150 - total flux cleaned = -0.000216598 Jy ! Component: 1200 - total flux cleaned = -0.00097205 Jy ! Component: 1250 - total flux cleaned = -0.00148692 Jy ! Component: 1300 - total flux cleaned = -0.00205026 Jy ! Component: 1350 - total flux cleaned = -0.00271632 Jy ! Component: 1400 - total flux cleaned = -0.00331761 Jy ! Component: 1450 - total flux cleaned = -0.0038571 Jy ! Component: 1500 - total flux cleaned = -0.00428266 Jy ! Component: 1550 - total flux cleaned = -0.00485998 Jy ! Component: 1600 - total flux cleaned = -0.00548352 Jy ! Component: 1650 - total flux cleaned = -0.00615142 Jy ! Component: 1700 - total flux cleaned = -0.00666096 Jy ! Component: 1750 - total flux cleaned = -0.00731863 Jy ! Component: 1800 - total flux cleaned = -0.00797054 Jy ! Component: 1850 - total flux cleaned = -0.00846809 Jy ! Component: 1900 - total flux cleaned = -0.00901149 Jy ! Component: 1950 - total flux cleaned = -0.0095999 Jy ! Component: 2000 - total flux cleaned = -0.010087 Jy ! Component: 2050 - total flux cleaned = -0.0105705 Jy ! Component: 2100 - total flux cleaned = -0.0110511 Jy ! Component: 2150 - total flux cleaned = -0.0116246 Jy ! Component: 2200 - total flux cleaned = -0.0121474 Jy ! Component: 2250 - total flux cleaned = -0.0126676 Jy ! Component: 2300 - total flux cleaned = -0.013138 Jy ! Component: 2350 - total flux cleaned = -0.0136529 Jy ! Component: 2400 - total flux cleaned = -0.0141194 Jy ! Component: 2450 - total flux cleaned = -0.0145375 Jy ! Component: 2500 - total flux cleaned = -0.0148615 Jy ! Component: 2550 - total flux cleaned = -0.0152307 Jy ! Component: 2600 - total flux cleaned = -0.0156453 Jy ! Component: 2650 - total flux cleaned = -0.0160141 Jy ! Component: 2700 - total flux cleaned = -0.0164747 Jy ! Component: 2750 - total flux cleaned = -0.0167973 Jy ! Component: 2800 - total flux cleaned = -0.0171665 Jy ! Component: 2850 - total flux cleaned = -0.0174899 Jy ! Component: 2900 - total flux cleaned = -0.0177214 Jy ! Component: 2950 - total flux cleaned = -0.0179091 Jy ! Component: 3000 - total flux cleaned = -0.0179569 Jy ! Component: 3050 - total flux cleaned = -0.0180057 Jy ! Component: 3100 - total flux cleaned = -0.0180558 Jy ! Component: 3150 - total flux cleaned = -0.0180048 Jy ! Component: 3200 - total flux cleaned = -0.0180558 Jy ! Component: 3250 - total flux cleaned = -0.017951 Jy ! Component: 3300 - total flux cleaned = -0.0179511 Jy ! Component: 3350 - total flux cleaned = -0.0178415 Jy ! Component: 3400 - total flux cleaned = -0.0177855 Jy ! Component: 3450 - total flux cleaned = -0.0177283 Jy ! Component: 3500 - total flux cleaned = -0.0176105 Jy ! Component: 3550 - total flux cleaned = -0.0174896 Jy ! Component: 3600 - total flux cleaned = -0.0173651 Jy ! Component: 3650 - total flux cleaned = -0.0172378 Jy ! Component: 3700 - total flux cleaned = -0.0171724 Jy ! Component: 3750 - total flux cleaned = -0.0171044 Jy ! Component: 3800 - total flux cleaned = -0.0170338 Jy ! Component: 3850 - total flux cleaned = -0.0169618 Jy ! Component: 3900 - total flux cleaned = -0.016889 Jy ! Component: 3950 - total flux cleaned = -0.0168129 Jy ! Component: 4000 - total flux cleaned = -0.0167341 Jy ! Component: 4050 - total flux cleaned = -0.0166542 Jy ! Total flux subtracted in 4096 components = -0.0165708 Jy ! Clean residual min=-0.004854 max=0.004509 Jy/beam ! Clean residual mean=0.000020 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.719574 Jy keep ! Adding 195 model components to the UV plane model. ! The established model now contains 302 components and 0.719574 Jy ![Exited script file: muppet] wmap "J0051-4226_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.641 x 7.551 at -0.7749 degrees (North through East) ! Clean map min=-0.010143 max=0.66227 Jy/beam ! Writing clean map to FITS file: J0051-4226_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.662268 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133062 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.602757 0.602757 1.20551 2.41103 4.82206 9.64411 19.2882 38.5764 77.1529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.662 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.641 x 7.551 at -0.7749 degrees (North through East) ! Clean map min=-0.010143 max=0.66227 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0051-4226_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:20 2019