! Started logfile: J0051-4226_S_2017_04_28_pus_uvs.log on Thu May 2 16:13:40 2019 obs J0051-4226_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0051-4226_S_2017_04_28_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0051-4226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0051-4226_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.365178Jy sigma=0.060847 ! Fit after self-cal, rms=0.358300Jy sigma=0.058882 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=10.96 mas, bpa=-10.29 degrees ! Estimated noise=1714.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112398 Jy ! Component: 100 - total flux cleaned = 0.106346 Jy ! Total flux subtracted in 100 components = 0.106346 Jy ! Clean residual min=-0.099439 max=0.114013 Jy/beam ! Clean residual mean=0.007973 rms=0.040172 Jy/beam ! Combined flux in latest and established models = 0.106346 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.106346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.604591Jy sigma=0.007052 ! Fit after self-cal, rms=0.604549Jy sigma=0.007052 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=11.37 mas, bpa=-8.872 degrees ! Estimated noise=1880.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059497 Jy ! Component: 100 - total flux cleaned = 0.0572575 Jy ! Component: 150 - total flux cleaned = 0.0575182 Jy ! Component: 200 - total flux cleaned = 0.0575309 Jy ! Total flux subtracted in 200 components = 0.0575309 Jy ! Clean residual min=-0.117732 max=0.137330 Jy/beam ! Clean residual mean=0.008496 rms=0.046596 Jy/beam ! Combined flux in latest and established models = 0.163877 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.163877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520146Jy sigma=0.010084 ! Fit after self-cal, rms=0.520144Jy sigma=0.010084 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.44 HN 1.00* KP 0.47 ! LA 0.50 MK 0.75 NL 1.00* OV 0.48 ! PT 0.48 SC 1.28 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.42 HN 1.00* KP 0.44 ! LA 0.46 MK 0.72 NL 1.00* OV 0.48 ! PT 0.47 SC 1.27 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.44 HN 1.00* KP 0.46 ! LA 0.46 MK 0.75 NL 1.00* OV 0.43 ! PT 0.47 SC 1.27 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.45 HN 1.00* KP 1.00* ! LA 36.94 MK 0.68 NL 1.00* OV 1.00* ! PT 0.49 SC 1.00* ! ! ! Fit before self-cal, rms=0.520144Jy sigma=0.010084 ! Fit after self-cal, rms=0.078811Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=9.885 mas, bpa=-3.467 degrees ! Estimated noise=1827.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301706 Jy ! Component: 100 - total flux cleaned = 0.00247903 Jy ! Component: 150 - total flux cleaned = 0.00177203 Jy ! Component: 200 - total flux cleaned = 0.0017728 Jy ! Total flux subtracted in 200 components = 0.0017728 Jy ! Clean residual min=-0.006943 max=0.006278 Jy/beam ! Clean residual mean=0.000088 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.16565 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.16565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074302Jy sigma=0.000721 ! Fit after self-cal, rms=0.074601Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074601Jy sigma=0.000682 ! Fit after self-cal, rms=0.067767Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=9.744 mas, bpa=-3.362 degrees ! Estimated noise=1817.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027622 Jy ! Component: 100 - total flux cleaned = 0.00211525 Jy ! Component: 150 - total flux cleaned = 0.00174836 Jy ! Component: 200 - total flux cleaned = 0.00158125 Jy ! Total flux subtracted in 200 components = 0.00158125 Jy ! Clean residual min=-0.005965 max=0.005667 Jy/beam ! Clean residual mean=0.000079 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.167231 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.167231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064551Jy sigma=0.000661 ! Fit after self-cal, rms=0.064528Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.70775e-06 Jy ! Component: 100 - total flux cleaned = -2.10746e-05 Jy ! Component: 150 - total flux cleaned = -3.88065e-05 Jy ! Component: 200 - total flux cleaned = -4.66982e-05 Jy ! Total flux subtracted in 200 components = -4.66982e-05 Jy ! Clean residual min=-0.005793 max=0.005611 Jy/beam ! Clean residual mean=0.000078 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.167185 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.167185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062554Jy sigma=0.000654 ! Fit after self-cal, rms=0.062548Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062548Jy sigma=0.000654 ! Fit after self-cal, rms=0.057663Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=9.621 mas, bpa=-3.211 degrees ! Estimated noise=1812.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212096 Jy ! Component: 100 - total flux cleaned = 0.0019614 Jy ! Component: 150 - total flux cleaned = 0.00168271 Jy ! Component: 200 - total flux cleaned = 0.00155665 Jy ! Total flux subtracted in 200 components = 0.00155665 Jy ! Clean residual min=-0.005192 max=0.005640 Jy/beam ! Clean residual mean=0.000079 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.168741 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.168741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055758Jy sigma=0.000640 ! Fit after self-cal, rms=0.055750Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011796 Jy ! Component: 100 - total flux cleaned = -0.000118435 Jy ! Component: 150 - total flux cleaned = -0.00012746 Jy ! Component: 200 - total flux cleaned = -0.000237357 Jy ! Total flux subtracted in 200 components = -0.000237357 Jy ! Clean residual min=-0.005083 max=0.005540 Jy/beam ! Clean residual mean=0.000076 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.168504 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.168504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054698Jy sigma=0.000636 ! Fit after self-cal, rms=0.054706Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054706Jy sigma=0.000636 ! Fit after self-cal, rms=0.051870Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.15 mas, bmaj=38.61 mas, bpa=3.964 degrees ! Estimated noise=1949.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795729 Jy ! Component: 100 - total flux cleaned = 0.000795835 Jy ! Component: 150 - total flux cleaned = 0.000796448 Jy ! Component: 200 - total flux cleaned = 0.000762929 Jy ! Total flux subtracted in 200 components = 0.000762929 Jy ! Clean residual min=-0.002049 max=0.003331 Jy/beam ! Clean residual mean=0.000118 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.169267 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 54 components and 0.169267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051755Jy sigma=0.000632 ! Fit after self-cal, rms=0.051745Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117984 Jy ! Component: 100 - total flux cleaned = -0.000115973 Jy ! Component: 150 - total flux cleaned = -0.000145086 Jy ! Component: 200 - total flux cleaned = -0.000186547 Jy ! Total flux subtracted in 200 components = -0.000186547 Jy ! Clean residual min=-0.002028 max=0.003344 Jy/beam ! Clean residual mean=0.000114 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.16908 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.16908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051698Jy sigma=0.000632 ! Fit after self-cal, rms=0.051704Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=9.53 mas, bpa=-3.08 degrees ! Estimated noise=1808.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 9.53 at -3.08 degrees (North through East) ! Clean map min=-0.052806 max=0.28327 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=7.917 mas, bpa=-2.779 degrees ! Estimated noise=2304.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180801 Jy ! Component: 100 - total flux cleaned = 0.185749 Jy ! Component: 150 - total flux cleaned = 0.182635 Jy ! Component: 200 - total flux cleaned = 0.180147 Jy ! Total flux subtracted in 200 components = 0.180147 Jy ! Clean residual min=-0.017413 max=0.017106 Jy/beam ! Clean residual mean=0.000200 rms=0.004140 Jy/beam ! Combined flux in latest and established models = 0.180147 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.180147 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=9.53 mas, bpa=-3.08 degrees ! Estimated noise=1808.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00549859 Jy ! Component: 100 - total flux cleaned = -0.00599694 Jy ! Component: 150 - total flux cleaned = -0.00682674 Jy ! Component: 200 - total flux cleaned = -0.00716427 Jy ! Total flux subtracted in 200 components = -0.00716427 Jy ! Clean residual min=-0.005722 max=0.006299 Jy/beam ! Clean residual mean=0.000116 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.172983 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.172983 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.15 mas, bmaj=38.61 mas, bpa=3.964 degrees ! Estimated noise=1949.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206535 Jy ! Component: 100 - total flux cleaned = -0.0025721 Jy ! Component: 150 - total flux cleaned = -0.00258406 Jy ! Component: 200 - total flux cleaned = -0.00260752 Jy ! Total flux subtracted in 200 components = -0.00260752 Jy ! Clean residual min=-0.002023 max=0.003281 Jy/beam ! Clean residual mean=0.000142 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.170375 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15126e-05 Jy ! Component: 100 - total flux cleaned = -3.37964e-05 Jy ! Component: 150 - total flux cleaned = -4.46968e-05 Jy ! Component: 200 - total flux cleaned = -6.62965e-05 Jy ! Total flux subtracted in 200 components = -6.62965e-05 Jy ! Clean residual min=-0.002024 max=0.003286 Jy/beam ! Clean residual mean=0.000140 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.170309 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.170309 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=9.53 mas, bpa=-3.08 degrees ! Estimated noise=1808.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625758 Jy ! Component: 100 - total flux cleaned = 0.000385109 Jy ! Component: 150 - total flux cleaned = -8.55111e-06 Jy ! Component: 200 - total flux cleaned = -3.24413e-06 Jy ! Total flux subtracted in 200 components = -3.24413e-06 Jy ! Clean residual min=-0.005170 max=0.004768 Jy/beam ! Clean residual mean=0.000084 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.170306 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.170306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060665Jy sigma=0.000658 ! Fit after self-cal, rms=0.060674Jy sigma=0.000658 wmodel J0051-4226_S_2017_04_28_pus_map.mod ! Writing 43 model components to file: J0051-4226_S_2017_04_28_pus_map.mod wobs J0051-4226_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0051-4226_S_2017_04_28_pus_uvs.fits wwins J0051-4226_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0051-4226_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143644 Jy ! Component: 100 - total flux cleaned = -0.00168706 Jy ! Component: 150 - total flux cleaned = -0.00214617 Jy ! Component: 200 - total flux cleaned = -0.00236725 Jy ! Component: 250 - total flux cleaned = -0.00236609 Jy ! Component: 300 - total flux cleaned = -0.00243557 Jy ! Component: 350 - total flux cleaned = -0.00250285 Jy ! Component: 400 - total flux cleaned = -0.00263616 Jy ! Component: 450 - total flux cleaned = -0.00270269 Jy ! Component: 500 - total flux cleaned = -0.00263709 Jy ! Component: 550 - total flux cleaned = -0.00244107 Jy ! Component: 600 - total flux cleaned = -0.0023753 Jy ! Component: 650 - total flux cleaned = -0.00224486 Jy ! Component: 700 - total flux cleaned = -0.0021114 Jy ! Component: 750 - total flux cleaned = -0.00211197 Jy ! Component: 800 - total flux cleaned = -0.00211229 Jy ! Component: 850 - total flux cleaned = -0.00218304 Jy ! Component: 900 - total flux cleaned = -0.00225364 Jy ! Component: 950 - total flux cleaned = -0.00232636 Jy ! Component: 1000 - total flux cleaned = -0.00240285 Jy ! Component: 1050 - total flux cleaned = -0.0024818 Jy ! Component: 1100 - total flux cleaned = -0.00256315 Jy ! Component: 1150 - total flux cleaned = -0.00256443 Jy ! Component: 1200 - total flux cleaned = -0.00265056 Jy ! Component: 1250 - total flux cleaned = -0.00265075 Jy ! Component: 1300 - total flux cleaned = -0.00265039 Jy ! Component: 1350 - total flux cleaned = -0.00264916 Jy ! Component: 1400 - total flux cleaned = -0.00274503 Jy ! Component: 1450 - total flux cleaned = -0.00284667 Jy ! Component: 1500 - total flux cleaned = -0.00295251 Jy ! Component: 1550 - total flux cleaned = -0.00306566 Jy ! Component: 1600 - total flux cleaned = -0.00318287 Jy ! Component: 1650 - total flux cleaned = -0.0031839 Jy ! Component: 1700 - total flux cleaned = -0.00330816 Jy ! Component: 1750 - total flux cleaned = -0.00343699 Jy ! Component: 1800 - total flux cleaned = -0.00357343 Jy ! Component: 1850 - total flux cleaned = -0.00371567 Jy ! Component: 1900 - total flux cleaned = -0.00386508 Jy ! Component: 1950 - total flux cleaned = -0.00386575 Jy ! Component: 2000 - total flux cleaned = -0.00402217 Jy ! Component: 2050 - total flux cleaned = -0.0041892 Jy ! Component: 2100 - total flux cleaned = -0.00419114 Jy ! Component: 2150 - total flux cleaned = -0.00437219 Jy ! Component: 2200 - total flux cleaned = -0.0045592 Jy ! Component: 2250 - total flux cleaned = -0.00475577 Jy ! Component: 2300 - total flux cleaned = -0.00475842 Jy ! Component: 2350 - total flux cleaned = -0.00496751 Jy ! Component: 2400 - total flux cleaned = -0.00518846 Jy ! Component: 2450 - total flux cleaned = -0.00541894 Jy ! Component: 2500 - total flux cleaned = -0.00541992 Jy ! Component: 2550 - total flux cleaned = -0.00566551 Jy ! Component: 2600 - total flux cleaned = -0.00592098 Jy ! Component: 2650 - total flux cleaned = -0.00618827 Jy ! Component: 2700 - total flux cleaned = -0.00646938 Jy ! Component: 2750 - total flux cleaned = -0.00676117 Jy ! Component: 2800 - total flux cleaned = -0.00707426 Jy ! Component: 2850 - total flux cleaned = -0.0070723 Jy ! Component: 2900 - total flux cleaned = -0.00773148 Jy ! Component: 2950 - total flux cleaned = -0.00808626 Jy ! Component: 3000 - total flux cleaned = -0.00845604 Jy ! Component: 3050 - total flux cleaned = -0.00845944 Jy ! Component: 3100 - total flux cleaned = -0.00885638 Jy ! Component: 3150 - total flux cleaned = -0.00927201 Jy ! Component: 3200 - total flux cleaned = -0.00927086 Jy ! Component: 3250 - total flux cleaned = -0.00972134 Jy ! Component: 3300 - total flux cleaned = -0.0102051 Jy ! Component: 3350 - total flux cleaned = -0.0102056 Jy ! Component: 3400 - total flux cleaned = -0.0107227 Jy ! Component: 3450 - total flux cleaned = -0.0112712 Jy ! Component: 3500 - total flux cleaned = -0.0112801 Jy ! Component: 3550 - total flux cleaned = -0.0118769 Jy ! Component: 3600 - total flux cleaned = -0.0118822 Jy ! Component: 3650 - total flux cleaned = -0.0125229 Jy ! Component: 3700 - total flux cleaned = -0.0125179 Jy ! Component: 3750 - total flux cleaned = -0.0132177 Jy ! Component: 3800 - total flux cleaned = -0.0139549 Jy ! Component: 3850 - total flux cleaned = -0.0139588 Jy ! Component: 3900 - total flux cleaned = -0.0147552 Jy ! Component: 3950 - total flux cleaned = -0.0156047 Jy ! Component: 4000 - total flux cleaned = -0.0156144 Jy ! Component: 4050 - total flux cleaned = -0.0165429 Jy ! Total flux subtracted in 4096 components = -0.0175337 Jy ! Clean residual min=-0.058588 max=0.056066 Jy/beam ! Clean residual mean=-0.000989 rms=0.012723 Jy/beam ! Combined flux in latest and established models = 0.152772 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 194 components and 0.152772 Jy ![Exited script file: muppet] wmap "J0051-4226_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 9.53 at -3.08 degrees (North through East) ! Clean map min=-0.092841 max=0.24603 Jy/beam ! Writing clean map to FITS file: J0051-4226_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.246034 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0137084 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -16.7152 16.7152 33.4304 66.8609 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0411 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.246 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 9.53 at -3.08 degrees (North through East) ! Clean map min=-0.092841 max=0.24603 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0051-4226_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:13:44 2019