! Started logfile: J0051-0650_X_2017_06_10_pus_uvs.log on Mon May 6 12:39:43 2019 obs J0051-0650_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0051-0650_X_2017_06_10_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96206 visibilities/baseline/integration-bin. ! Found source: J0051-0650 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 42600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0051-0650_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.451438Jy sigma=0.003961 ! Fit after self-cal, rms=0.389194Jy sigma=0.003453 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.6704 mas, bmaj=1.708 mas, bpa=-2.969 degrees ! Estimated noise=776.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.470465 Jy ! Component: 100 - total flux cleaned = 0.598504 Jy ! Total flux subtracted in 100 components = 0.598504 Jy ! Clean residual min=-0.017026 max=0.052339 Jy/beam ! Clean residual mean=-0.000097 rms=0.005041 Jy/beam ! Combined flux in latest and established models = 0.598504 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.598504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141007Jy sigma=0.001254 ! Fit after self-cal, rms=0.140402Jy sigma=0.001249 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592595 Jy ! Component: 100 - total flux cleaned = 0.0904972 Jy ! Total flux subtracted in 100 components = 0.0904972 Jy ! Clean residual min=-0.009784 max=0.020620 Jy/beam ! Clean residual mean=-0.000032 rms=0.002656 Jy/beam ! Combined flux in latest and established models = 0.689002 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.689002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102177Jy sigma=0.000889 ! Fit after self-cal, rms=0.101785Jy sigma=0.000886 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021414 Jy ! Component: 100 - total flux cleaned = 0.0339604 Jy ! Total flux subtracted in 100 components = 0.0339604 Jy ! Clean residual min=-0.007634 max=0.021590 Jy/beam ! Clean residual mean=-0.000009 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 0.722962 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.722962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094301Jy sigma=0.000814 ! Fit after self-cal, rms=0.094130Jy sigma=0.000813 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-2.2, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182988 Jy ! Component: 100 - total flux cleaned = 0.028502 Jy ! Total flux subtracted in 100 components = 0.028502 Jy ! Clean residual min=-0.005597 max=0.006536 Jy/beam ! Clean residual mean=-0.000001 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.751464 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.751464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088639Jy sigma=0.000759 ! Fit after self-cal, rms=0.088424Jy sigma=0.000757 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8542 mas, bmaj=2.01 mas, bpa=-1.288 degrees ! Estimated noise=386.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014791 Jy ! Component: 100 - total flux cleaned = 0.0241339 Jy ! Component: 150 - total flux cleaned = 0.0306124 Jy ! Component: 200 - total flux cleaned = 0.03523 Jy ! Total flux subtracted in 200 components = 0.03523 Jy ! Clean residual min=-0.004429 max=0.007011 Jy/beam ! Clean residual mean=0.000049 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.786694 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 68 components and 0.786694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085614Jy sigma=0.000730 ! Fit after self-cal, rms=0.085446Jy sigma=0.000729 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.02 KP 1.01 ! LA 0.97 MK 1.00 NL 1.00 OV 1.01 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.99 KP 0.98 ! LA 0.98 MK 0.99 NL 1.00 OV 1.01 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.99 KP 0.99 ! LA 1.00 MK 1.01 NL 1.00 OV 1.01 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.01 KP 0.99 ! LA 1.00 MK 1.03 NL 1.00 OV 1.01 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.96 KP 0.99 ! LA 0.99 MK 1.02 NL 0.99 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 1.00 ! LA 0.98 MK 1.00 NL 1.00 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 1.00 ! LA 1.00 MK 1.12 NL 0.99 OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.98 KP 0.99 ! LA 0.97 MK 0.99 NL 0.99 OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 0.99 ! LA 0.98 MK 0.97 NL 0.99 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 0.99 ! LA 1.00 MK 0.99 NL 0.99 OV 0.99 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 0.99 ! LA 1.00 MK 0.99 NL 0.98 OV 1.00 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.98 KP 0.93 ! LA 0.99 MK 0.99 NL 0.98 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Fit before self-cal, rms=0.085446Jy sigma=0.000729 ! Fit after self-cal, rms=0.083196Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.856 mas, bmaj=2.013 mas, bpa=-1.259 degrees ! Estimated noise=384.592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391799 Jy ! Component: 100 - total flux cleaned = 0.00512908 Jy ! Component: 150 - total flux cleaned = 0.00578283 Jy ! Component: 200 - total flux cleaned = 0.00598493 Jy ! Total flux subtracted in 200 components = 0.00598493 Jy ! Clean residual min=-0.004245 max=0.006357 Jy/beam ! Clean residual mean=0.000045 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.792679 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.792679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082993Jy sigma=0.000710 ! Fit after self-cal, rms=0.082961Jy sigma=0.000710 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082961Jy sigma=0.000710 ! Fit after self-cal, rms=0.082173Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8559 mas, bmaj=2.016 mas, bpa=-1.265 degrees ! Estimated noise=384.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341928 Jy ! Component: 100 - total flux cleaned = 0.00469369 Jy ! Component: 150 - total flux cleaned = 0.00484814 Jy ! Component: 200 - total flux cleaned = 0.00484684 Jy ! Total flux subtracted in 200 components = 0.00484684 Jy ! Clean residual min=-0.002721 max=0.006197 Jy/beam ! Clean residual mean=0.000027 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.797526 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.797526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082036Jy sigma=0.000690 ! Fit after self-cal, rms=0.082021Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613429 Jy ! Component: 100 - total flux cleaned = 0.00960665 Jy ! Component: 150 - total flux cleaned = 0.0119698 Jy ! Component: 200 - total flux cleaned = 0.0136755 Jy ! Total flux subtracted in 200 components = 0.0136755 Jy ! Clean residual min=-0.002461 max=0.003796 Jy/beam ! Clean residual mean=0.000018 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.811202 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 145 components and 0.811202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081550Jy sigma=0.000685 ! Fit after self-cal, rms=0.081529Jy sigma=0.000685 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (0.4, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363866 Jy ! Component: 100 - total flux cleaned = 0.00583357 Jy ! Component: 150 - total flux cleaned = 0.0075675 Jy ! Component: 200 - total flux cleaned = 0.00903125 Jy ! Total flux subtracted in 200 components = 0.00903125 Jy ! Clean residual min=-0.001918 max=0.002887 Jy/beam ! Clean residual mean=0.000015 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.820233 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 175 components and 0.820233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081336Jy sigma=0.000683 ! Fit after self-cal, rms=0.081332Jy sigma=0.000683 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Added new window around map position (-9.6, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256902 Jy ! Component: 100 - total flux cleaned = 0.00395425 Jy ! Component: 150 - total flux cleaned = 0.00478887 Jy ! Component: 200 - total flux cleaned = 0.00549123 Jy ! Total flux subtracted in 200 components = 0.00549123 Jy ! Clean residual min=-0.001866 max=0.001669 Jy/beam ! Clean residual mean=0.000011 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.825724 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 203 components and 0.825724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081234Jy sigma=0.000682 ! Fit after self-cal, rms=0.081231Jy sigma=0.000682 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081231Jy sigma=0.000682 ! Fit after self-cal, rms=0.081436Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8557 mas, bmaj=2.016 mas, bpa=-1.29 degrees ! Estimated noise=384.557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152842 Jy ! Component: 100 - total flux cleaned = 0.00245924 Jy ! Component: 150 - total flux cleaned = 0.00323539 Jy ! Component: 200 - total flux cleaned = 0.00393052 Jy ! Total flux subtracted in 200 components = 0.00393052 Jy ! Clean residual min=-0.001598 max=0.001408 Jy/beam ! Clean residual mean=0.000012 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.829654 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 223 components and 0.829654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081392Jy sigma=0.000681 ! Fit after self-cal, rms=0.081390Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379631 Jy ! Component: 100 - total flux cleaned = 0.000748454 Jy ! Component: 150 - total flux cleaned = 0.00109612 Jy ! Component: 200 - total flux cleaned = 0.00139502 Jy ! Total flux subtracted in 200 components = 0.00139502 Jy ! Clean residual min=-0.001523 max=0.001348 Jy/beam ! Clean residual mean=0.000011 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.83105 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 231 components and 0.831049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081368Jy sigma=0.000680 ! Fit after self-cal, rms=0.081365Jy sigma=0.000680 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081365Jy sigma=0.000680 ! Fit after self-cal, rms=0.081392Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=2.135 mas, bmaj=3.622 mas, bpa=1.047 degrees ! Estimated noise=497.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173655 Jy ! Component: 100 - total flux cleaned = 0.00254893 Jy ! Component: 150 - total flux cleaned = 0.00288421 Jy ! Component: 200 - total flux cleaned = 0.0031447 Jy ! Total flux subtracted in 200 components = 0.0031447 Jy ! Clean residual min=-0.001621 max=0.001754 Jy/beam ! Clean residual mean=0.000023 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.834194 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 254 components and 0.834194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081374Jy sigma=0.000680 ! Fit after self-cal, rms=0.081371Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446095 Jy ! Component: 100 - total flux cleaned = 0.000649806 Jy ! Component: 150 - total flux cleaned = 0.000836773 Jy ! Component: 200 - total flux cleaned = 0.00103935 Jy ! Total flux subtracted in 200 components = 0.00103935 Jy ! Clean residual min=-0.001472 max=0.001689 Jy/beam ! Clean residual mean=0.000020 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.835233 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 262 components and 0.835233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081363Jy sigma=0.000680 ! Fit after self-cal, rms=0.081361Jy sigma=0.000680 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8557 mas, bmaj=2.017 mas, bpa=-1.308 degrees ! Estimated noise=384.656 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8557 x 2.017 at -1.308 degrees (North through East) ! Clean map min=-0.001285 max=0.62375 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081361Jy sigma=0.000680 ! Fit after self-cal, rms=0.076156Jy sigma=0.000620 ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8557 mas, bmaj=2.017 mas, bpa=-1.334 degrees ! Estimated noise=384.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058562 Jy ! Component: 100 - total flux cleaned = 0.000741363 Jy ! Component: 150 - total flux cleaned = 0.000767621 Jy ! Component: 200 - total flux cleaned = 0.000840947 Jy ! Total flux subtracted in 200 components = 0.000840947 Jy ! Clean residual min=-0.001392 max=0.001286 Jy/beam ! Clean residual mean=0.000011 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.836074 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 273 components and 0.836074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076136Jy sigma=0.000620 ! Fit after self-cal, rms=0.076133Jy sigma=0.000620 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018363 Jy ! Component: 100 - total flux cleaned = 0.000274632 Jy ! Component: 150 - total flux cleaned = 0.000360441 Jy ! Component: 200 - total flux cleaned = 0.000421786 Jy ! Total flux subtracted in 200 components = 0.000421786 Jy ! Clean residual min=-0.001337 max=0.001247 Jy/beam ! Clean residual mean=0.000011 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.836496 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 281 components and 0.836496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076121Jy sigma=0.000620 ! Fit after self-cal, rms=0.076119Jy sigma=0.000620 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076119Jy sigma=0.000620 ! Fit after self-cal, rms=0.076145Jy sigma=0.000620 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.6712 mas, bmaj=1.714 mas, bpa=-3.067 degrees ! Estimated noise=772.753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.467935 Jy ! Component: 100 - total flux cleaned = 0.597947 Jy ! Component: 150 - total flux cleaned = 0.657558 Jy ! Component: 200 - total flux cleaned = 0.690236 Jy ! Total flux subtracted in 200 components = 0.690236 Jy ! Clean residual min=-0.006797 max=0.017621 Jy/beam ! Clean residual mean=-0.000041 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 0.690236 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.690236 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8558 mas, bmaj=2.017 mas, bpa=-1.341 degrees ! Estimated noise=384.755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367816 Jy ! Component: 100 - total flux cleaned = 0.0594721 Jy ! Component: 150 - total flux cleaned = 0.074455 Jy ! Component: 200 - total flux cleaned = 0.084939 Jy ! Total flux subtracted in 200 components = 0.084939 Jy ! Clean residual min=-0.003233 max=0.006013 Jy/beam ! Clean residual mean=0.000030 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.775175 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 46 components and 0.775175 Jy ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=2.134 mas, bmaj=3.622 mas, bpa=1.026 degrees ! Estimated noise=497.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143495 Jy ! Component: 100 - total flux cleaned = 0.0238771 Jy ! Component: 150 - total flux cleaned = 0.0311114 Jy ! Component: 200 - total flux cleaned = 0.0367981 Jy ! Total flux subtracted in 200 components = 0.0367981 Jy ! Clean residual min=-0.002523 max=0.003871 Jy/beam ! Clean residual mean=0.000044 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.811973 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454701 Jy ! Component: 100 - total flux cleaned = 0.00824285 Jy ! Component: 150 - total flux cleaned = 0.0112817 Jy ! Component: 200 - total flux cleaned = 0.0138122 Jy ! Total flux subtracted in 200 components = 0.0138122 Jy ! Clean residual min=-0.002003 max=0.002225 Jy/beam ! Clean residual mean=0.000031 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.825785 Jy ! Adding 124 model components to the UV plane model. ! The established model now contains 161 components and 0.825785 Jy ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! Estimated beam: bmin=0.8558 mas, bmaj=2.017 mas, bpa=-1.341 degrees ! Estimated noise=384.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270492 Jy ! Component: 100 - total flux cleaned = 0.00394612 Jy ! Component: 150 - total flux cleaned = 0.0052137 Jy ! Component: 200 - total flux cleaned = 0.0062667 Jy ! Total flux subtracted in 200 components = 0.0062667 Jy ! Clean residual min=-0.001612 max=0.001751 Jy/beam ! Clean residual mean=0.000013 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.832052 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 181 components and 0.832052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076321Jy sigma=0.000621 ! Fit after self-cal, rms=0.076280Jy sigma=0.000621 wmodel J0051-0650_X_2017_06_10_pus_map.mod ! Writing 181 model components to file: J0051-0650_X_2017_06_10_pus_map.mod wobs J0051-0650_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0051-0650_X_2017_06_10_pus_uvs.fits wwins J0051-0650_X_2017_06_10_pus_map.win ! wwins: Wrote 6 windows to J0051-0650_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581031 Jy ! Component: 100 - total flux cleaned = 0.000910912 Jy ! Component: 150 - total flux cleaned = 0.00114306 Jy ! Component: 200 - total flux cleaned = 0.00128992 Jy ! Component: 250 - total flux cleaned = 0.00140667 Jy ! Component: 300 - total flux cleaned = 0.00145171 Jy ! Component: 350 - total flux cleaned = 0.00153799 Jy ! Component: 400 - total flux cleaned = 0.00162238 Jy ! Component: 450 - total flux cleaned = 0.0016841 Jy ! Component: 500 - total flux cleaned = 0.00178392 Jy ! Component: 550 - total flux cleaned = 0.00186144 Jy ! Component: 600 - total flux cleaned = 0.00186147 Jy ! Component: 650 - total flux cleaned = 0.00189891 Jy ! Component: 700 - total flux cleaned = 0.00188079 Jy ! Component: 750 - total flux cleaned = 0.00188057 Jy ! Component: 800 - total flux cleaned = 0.00184483 Jy ! Component: 850 - total flux cleaned = 0.00177577 Jy ! Component: 900 - total flux cleaned = 0.00180933 Jy ! Component: 950 - total flux cleaned = 0.00177582 Jy ! Component: 1000 - total flux cleaned = 0.00174288 Jy ! Component: 1050 - total flux cleaned = 0.00167793 Jy ! Component: 1100 - total flux cleaned = 0.00162991 Jy ! Component: 1150 - total flux cleaned = 0.00158262 Jy ! Component: 1200 - total flux cleaned = 0.00156739 Jy ! Component: 1250 - total flux cleaned = 0.00155211 Jy ! Component: 1300 - total flux cleaned = 0.00152158 Jy ! Component: 1350 - total flux cleaned = 0.00149134 Jy ! Component: 1400 - total flux cleaned = 0.00147629 Jy ! Component: 1450 - total flux cleaned = 0.00146155 Jy ! Component: 1500 - total flux cleaned = 0.00140355 Jy ! Component: 1550 - total flux cleaned = 0.00141782 Jy ! Component: 1600 - total flux cleaned = 0.00133274 Jy ! Component: 1650 - total flux cleaned = 0.00137505 Jy ! Component: 1700 - total flux cleaned = 0.00134689 Jy ! Component: 1750 - total flux cleaned = 0.00131943 Jy ! Component: 1800 - total flux cleaned = 0.00129222 Jy ! Component: 1850 - total flux cleaned = 0.00123816 Jy ! Component: 1900 - total flux cleaned = 0.00118483 Jy ! Component: 1950 - total flux cleaned = 0.00111909 Jy ! Component: 2000 - total flux cleaned = 0.00114508 Jy ! Total flux subtracted in 2048 components = 0.0010806 Jy ! Clean residual min=-0.000727 max=0.000927 Jy/beam ! Clean residual mean=0.000007 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.833133 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 325 components and 0.833132 Jy ![Exited script file: muppet] wmap "J0051-0650_X_2017_06_10_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8558 x 2.017 at -1.341 degrees (North through East) ! Clean map min=-0.0012001 max=0.62386 Jy/beam ! Writing clean map to FITS file: J0051-0650_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.623863 invert ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1992 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247601 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.119065 0.119065 0.23813 0.476261 0.952521 1.90504 3.81008 7.62017 15.2403 30.4807 60.9613 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.623 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8558 x 2.017 at -1.341 degrees (North through East) ! Clean map min=-0.0012001 max=0.62386 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0051-0650_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:39:47 2019