! Started logfile: J0050-0929_S_2017_09_26_pus_uvs.log on Sat May 11 12:53:11 2019 obs J0050-0929_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0050-0929_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.532051 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0050-0929_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.543138Jy sigma=0.004495 ! Fit after self-cal, rms=0.538089Jy sigma=0.004454 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=21.36 mas, bpa=-19.45 degrees ! Estimated noise=2628.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.357133 Jy ! Component: 100 - total flux cleaned = 0.441172 Jy ! Total flux subtracted in 100 components = 0.441172 Jy ! Clean residual min=-0.028618 max=0.039277 Jy/beam ! Clean residual mean=0.000046 rms=0.009308 Jy/beam ! Combined flux in latest and established models = 0.441172 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.441172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129350Jy sigma=0.000994 ! Fit after self-cal, rms=0.129355Jy sigma=0.000994 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=22.83 mas, bpa=-19.15 degrees ! Estimated noise=2058.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413566 Jy ! Component: 100 - total flux cleaned = 0.0531151 Jy ! Component: 150 - total flux cleaned = 0.0530754 Jy ! Component: 200 - total flux cleaned = 0.0536724 Jy ! Total flux subtracted in 200 components = 0.0536724 Jy ! Clean residual min=-0.014984 max=0.015837 Jy/beam ! Clean residual mean=0.000011 rms=0.004135 Jy/beam ! Combined flux in latest and established models = 0.494844 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 48 components and 0.494844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117700Jy sigma=0.000877 ! Fit after self-cal, rms=0.117690Jy sigma=0.000877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.98 KP 1.04 ! LA 1.00 MK 0.96 NL 0.90 OV 1.02 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.03 KP 1.01 ! LA 0.97 MK 0.96 NL 1.01 OV 1.03 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 0.97 ! LA 0.97 MK 0.98 NL 1.00 OV 0.97 ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.50 HN 0.97 KP 1.00* ! LA 1.49 MK 1.38 NL 1.00* OV 0.71 ! PT 1.00 ! ! ! Fit before self-cal, rms=0.117690Jy sigma=0.000877 ! Fit after self-cal, rms=0.109278Jy sigma=0.000735 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=22.83 mas, bpa=-19.17 degrees ! Estimated noise=2039.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239711 Jy ! Component: 100 - total flux cleaned = 0.00296311 Jy ! Component: 150 - total flux cleaned = 0.00336236 Jy ! Component: 200 - total flux cleaned = 0.0038251 Jy ! Total flux subtracted in 200 components = 0.0038251 Jy ! Clean residual min=-0.011405 max=0.009830 Jy/beam ! Clean residual mean=0.000025 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 0.49867 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.49867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109085Jy sigma=0.000732 ! Fit after self-cal, rms=0.109317Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109317Jy sigma=0.000732 ! Fit after self-cal, rms=0.111652Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=22.89 mas, bpa=-19.19 degrees ! Estimated noise=2042.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143472 Jy ! Component: 100 - total flux cleaned = 0.00206105 Jy ! Component: 150 - total flux cleaned = 0.00254537 Jy ! Component: 200 - total flux cleaned = 0.00259432 Jy ! Total flux subtracted in 200 components = 0.00259432 Jy ! Clean residual min=-0.004724 max=0.004958 Jy/beam ! Clean residual mean=0.000004 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.501264 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.501264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111563Jy sigma=0.000634 ! Fit after self-cal, rms=0.112880Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157056 Jy ! Component: 100 - total flux cleaned = 1.6549e-05 Jy ! Component: 150 - total flux cleaned = 0.000135106 Jy ! Component: 200 - total flux cleaned = 0.000280747 Jy ! Total flux subtracted in 200 components = 0.000280747 Jy ! Clean residual min=-0.004620 max=0.004964 Jy/beam ! Clean residual mean=0.000004 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.501545 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.501545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112869Jy sigma=0.000633 ! Fit after self-cal, rms=0.112854Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112854Jy sigma=0.000633 ! Fit after self-cal, rms=0.113529Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=22.89 mas, bpa=-19.17 degrees ! Estimated noise=2041.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804702 Jy ! Component: 100 - total flux cleaned = 0.00132134 Jy ! Component: 150 - total flux cleaned = 0.00164343 Jy ! Component: 200 - total flux cleaned = 0.0017999 Jy ! Total flux subtracted in 200 components = 0.0017999 Jy ! Clean residual min=-0.004525 max=0.005053 Jy/beam ! Clean residual mean=0.000004 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.503345 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 0.503344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113517Jy sigma=0.000633 ! Fit after self-cal, rms=0.113521Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410059 Jy ! Component: 100 - total flux cleaned = 0.00548884 Jy ! Component: 150 - total flux cleaned = 0.00591398 Jy ! Component: 200 - total flux cleaned = 0.00636016 Jy ! Total flux subtracted in 200 components = 0.00636016 Jy ! Clean residual min=-0.003521 max=0.003657 Jy/beam ! Clean residual mean=0.000002 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.509705 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 158 components and 0.509705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113359Jy sigma=0.000630 ! Fit after self-cal, rms=0.113411Jy sigma=0.000630 ! Inverting map ! Added new window around map position (-26.5, -101.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362205 Jy ! Component: 100 - total flux cleaned = -0.000118335 Jy ! Component: 150 - total flux cleaned = 9.50214e-05 Jy ! Component: 200 - total flux cleaned = 9.47276e-05 Jy ! Total flux subtracted in 200 components = 9.47276e-05 Jy ! Clean residual min=-0.002740 max=0.003200 Jy/beam ! Clean residual mean=0.000000 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.509799 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 188 components and 0.509799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113255Jy sigma=0.000628 ! Fit after self-cal, rms=0.113247Jy sigma=0.000628 ! Inverting map ! Added new window around map position (127.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012537 Jy ! Component: 100 - total flux cleaned = 0.00131628 Jy ! Component: 150 - total flux cleaned = 0.00210558 Jy ! Component: 200 - total flux cleaned = 0.00278407 Jy ! Total flux subtracted in 200 components = 0.00278407 Jy ! Clean residual min=-0.002279 max=0.002341 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.512583 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 208 components and 0.512583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113091Jy sigma=0.000627 ! Fit after self-cal, rms=0.113098Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113098Jy sigma=0.000627 ! Fit after self-cal, rms=0.112060Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.019 mas, bmaj=27.29 mas, bpa=-13.47 degrees ! Estimated noise=2427.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998609 Jy ! Component: 100 - total flux cleaned = 0.00176996 Jy ! Component: 150 - total flux cleaned = 0.00265002 Jy ! Component: 200 - total flux cleaned = 0.00331257 Jy ! Total flux subtracted in 200 components = 0.00331257 Jy ! Clean residual min=-0.002274 max=0.001658 Jy/beam ! Clean residual mean=0.000004 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.515896 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 249 components and 0.515896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112022Jy sigma=0.000626 ! Fit after self-cal, rms=0.111964Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778884 Jy ! Component: 100 - total flux cleaned = 0.00121519 Jy ! Component: 150 - total flux cleaned = 0.00159564 Jy ! Component: 200 - total flux cleaned = 0.00214307 Jy ! Total flux subtracted in 200 components = 0.00214307 Jy ! Clean residual min=-0.002104 max=0.001629 Jy/beam ! Clean residual mean=0.000003 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.518039 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 266 components and 0.518039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111940Jy sigma=0.000626 ! Fit after self-cal, rms=0.111942Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=22.9 mas, bpa=-19.17 degrees ! Estimated noise=2039.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 22.9 at -19.17 degrees (North through East) ! Clean map min=-0.005918 max=0.47321 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=21.46 mas, bpa=-19.3 degrees ! Estimated noise=2649.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.359838 Jy ! Component: 100 - total flux cleaned = 0.440065 Jy ! Component: 150 - total flux cleaned = 0.470749 Jy ! Component: 200 - total flux cleaned = 0.486309 Jy ! Total flux subtracted in 200 components = 0.486309 Jy ! Clean residual min=-0.007585 max=0.008143 Jy/beam ! Clean residual mean=0.000016 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.486309 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.486309 Jy ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=22.9 mas, bpa=-19.17 degrees ! Estimated noise=2039.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100331 Jy ! Component: 100 - total flux cleaned = 0.0144219 Jy ! Component: 150 - total flux cleaned = 0.0170636 Jy ! Component: 200 - total flux cleaned = 0.0186676 Jy ! Total flux subtracted in 200 components = 0.0186676 Jy ! Clean residual min=-0.004449 max=0.004348 Jy/beam ! Clean residual mean=0.000009 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.504976 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 63 components and 0.504976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.019 mas, bmaj=27.29 mas, bpa=-13.47 degrees ! Estimated noise=2427.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346703 Jy ! Component: 100 - total flux cleaned = 0.00555935 Jy ! Component: 150 - total flux cleaned = 0.00740097 Jy ! Component: 200 - total flux cleaned = 0.0089697 Jy ! Total flux subtracted in 200 components = 0.0089697 Jy ! Clean residual min=-0.003221 max=0.003036 Jy/beam ! Clean residual mean=0.000007 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.513946 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144095 Jy ! Component: 100 - total flux cleaned = 0.00223413 Jy ! Component: 150 - total flux cleaned = 0.00280449 Jy ! Component: 200 - total flux cleaned = 0.00319398 Jy ! Total flux subtracted in 200 components = 0.00319398 Jy ! Clean residual min=-0.002763 max=0.002742 Jy/beam ! Clean residual mean=0.000006 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.51714 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 159 components and 0.51714 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=22.9 mas, bpa=-19.17 degrees ! Estimated noise=2039.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130756 Jy ! Component: 100 - total flux cleaned = 0.000321322 Jy ! Component: 150 - total flux cleaned = 0.000125271 Jy ! Component: 200 - total flux cleaned = 0.000120745 Jy ! Total flux subtracted in 200 components = 0.000120745 Jy ! Clean residual min=-0.002734 max=0.002984 Jy/beam ! Clean residual mean=0.000003 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.517261 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 186 components and 0.517261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112059Jy sigma=0.000628 ! Fit after self-cal, rms=0.112024Jy sigma=0.000628 wmodel J0050-0929_S_2017_09_26_pus_map.mod ! Writing 186 model components to file: J0050-0929_S_2017_09_26_pus_map.mod wobs J0050-0929_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0050-0929_S_2017_09_26_pus_uvs.fits wwins J0050-0929_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J0050-0929_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.89055e-05 Jy ! Component: 100 - total flux cleaned = 0.000149598 Jy ! Component: 150 - total flux cleaned = 0.000360776 Jy ! Component: 200 - total flux cleaned = 0.000766244 Jy ! Component: 250 - total flux cleaned = 0.00115477 Jy ! Component: 300 - total flux cleaned = 0.00149079 Jy ! Component: 350 - total flux cleaned = 0.0018852 Jy ! Component: 400 - total flux cleaned = 0.00219833 Jy ! Component: 450 - total flux cleaned = 0.00253607 Jy ! Component: 500 - total flux cleaned = 0.0027977 Jy ! Component: 550 - total flux cleaned = 0.00311634 Jy ! Component: 600 - total flux cleaned = 0.0033033 Jy ! Component: 650 - total flux cleaned = 0.00354707 Jy ! Component: 700 - total flux cleaned = 0.00378483 Jy ! Component: 750 - total flux cleaned = 0.0039598 Jy ! Component: 800 - total flux cleaned = 0.0041031 Jy ! Component: 850 - total flux cleaned = 0.00421551 Jy ! Component: 900 - total flux cleaned = 0.00432562 Jy ! Component: 950 - total flux cleaned = 0.00440637 Jy ! Component: 1000 - total flux cleaned = 0.00448611 Jy ! Component: 1050 - total flux cleaned = 0.00453834 Jy ! Component: 1100 - total flux cleaned = 0.00456416 Jy ! Component: 1150 - total flux cleaned = 0.00456409 Jy ! Component: 1200 - total flux cleaned = 0.00453904 Jy ! Component: 1250 - total flux cleaned = 0.00471219 Jy ! Component: 1300 - total flux cleaned = 0.00478543 Jy ! Component: 1350 - total flux cleaned = 0.00476117 Jy ! Component: 1400 - total flux cleaned = 0.00476149 Jy ! Component: 1450 - total flux cleaned = 0.00483276 Jy ! Component: 1500 - total flux cleaned = 0.00473862 Jy ! Component: 1550 - total flux cleaned = 0.00459917 Jy ! Component: 1600 - total flux cleaned = 0.00453026 Jy ! Component: 1650 - total flux cleaned = 0.00453032 Jy ! Component: 1700 - total flux cleaned = 0.00441728 Jy ! Component: 1750 - total flux cleaned = 0.00432758 Jy ! Component: 1800 - total flux cleaned = 0.00428313 Jy ! Component: 1850 - total flux cleaned = 0.00428289 Jy ! Component: 1900 - total flux cleaned = 0.00417368 Jy ! Component: 1950 - total flux cleaned = 0.0041522 Jy ! Component: 2000 - total flux cleaned = 0.0041094 Jy ! Component: 2050 - total flux cleaned = 0.00410929 Jy ! Component: 2100 - total flux cleaned = 0.00404619 Jy ! Component: 2150 - total flux cleaned = 0.00402516 Jy ! Component: 2200 - total flux cleaned = 0.00400415 Jy ! Component: 2250 - total flux cleaned = 0.00394221 Jy ! Component: 2300 - total flux cleaned = 0.00383984 Jy ! Component: 2350 - total flux cleaned = 0.00377878 Jy ! Component: 2400 - total flux cleaned = 0.00375877 Jy ! Component: 2450 - total flux cleaned = 0.00365869 Jy ! Component: 2500 - total flux cleaned = 0.00361886 Jy ! Component: 2550 - total flux cleaned = 0.00353989 Jy ! Component: 2600 - total flux cleaned = 0.00350071 Jy ! Component: 2650 - total flux cleaned = 0.00350072 Jy ! Component: 2700 - total flux cleaned = 0.00340391 Jy ! Component: 2750 - total flux cleaned = 0.00340395 Jy ! Component: 2800 - total flux cleaned = 0.00338491 Jy ! Component: 2850 - total flux cleaned = 0.00336589 Jy ! Component: 2900 - total flux cleaned = 0.00340379 Jy ! Component: 2950 - total flux cleaned = 0.00338493 Jy ! Component: 3000 - total flux cleaned = 0.00334755 Jy ! Component: 3050 - total flux cleaned = 0.0032549 Jy ! Component: 3100 - total flux cleaned = 0.00327336 Jy ! Component: 3150 - total flux cleaned = 0.00331016 Jy ! Component: 3200 - total flux cleaned = 0.00327364 Jy ! Component: 3250 - total flux cleaned = 0.0032374 Jy ! Component: 3300 - total flux cleaned = 0.00321924 Jy ! Component: 3350 - total flux cleaned = 0.00318325 Jy ! Component: 3400 - total flux cleaned = 0.00320099 Jy ! Component: 3450 - total flux cleaned = 0.00318316 Jy ! Component: 3500 - total flux cleaned = 0.00312985 Jy ! Component: 3550 - total flux cleaned = 0.00304151 Jy ! Component: 3600 - total flux cleaned = 0.00304154 Jy ! Component: 3650 - total flux cleaned = 0.003024 Jy ! Component: 3700 - total flux cleaned = 0.00298915 Jy ! Component: 3750 - total flux cleaned = 0.00293704 Jy ! Component: 3800 - total flux cleaned = 0.00290266 Jy ! Component: 3850 - total flux cleaned = 0.00291981 Jy ! Component: 3900 - total flux cleaned = 0.00288555 Jy ! Component: 3950 - total flux cleaned = 0.00276623 Jy ! Component: 4000 - total flux cleaned = 0.00278323 Jy ! Component: 4050 - total flux cleaned = 0.00268186 Jy ! Total flux subtracted in 4096 components = 0.00269869 Jy ! Clean residual min=-0.000973 max=0.000912 Jy/beam ! Clean residual mean=0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.51996 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 409 components and 0.51996 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 22.9 at -19.17 degrees (North through East) ! Clean map min=-0.0028544 max=0.4709 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.4709 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000318898 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.203163 0.203163 0.406326 0.812651 1.6253 3.2506 6.50121 13.0024 26.0048 52.0097 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.47 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 22.9 at -19.17 degrees (North through East) ! Clean map min=-0.0028544 max=0.4709 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0050-0929_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:53:16 2019