! Started logfile: J0050-0929_S_2017_06_10_pus_uvs.log on Mon May 6 14:40:03 2019 obs J0050-0929_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0050-0929_S_2017_06_10_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.405747 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 4236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0050-0929_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.554413Jy sigma=0.004864 ! Fit after self-cal, rms=0.541878Jy sigma=0.004770 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=6.804 mas, bpa=-3.369 degrees ! Estimated noise=1864.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.358382 Jy ! Component: 100 - total flux cleaned = 0.438027 Jy ! Total flux subtracted in 100 components = 0.438027 Jy ! Clean residual min=-0.010709 max=0.026578 Jy/beam ! Clean residual mean=-0.000033 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 0.438027 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.438027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106670Jy sigma=0.000853 ! Fit after self-cal, rms=0.106670Jy sigma=0.000853 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257789 Jy ! Component: 100 - total flux cleaned = 0.0368999 Jy ! Total flux subtracted in 100 components = 0.0368999 Jy ! Clean residual min=-0.010389 max=0.012546 Jy/beam ! Clean residual mean=-0.000009 rms=0.002489 Jy/beam ! Combined flux in latest and established models = 0.474927 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.474927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099443Jy sigma=0.000793 ! Fit after self-cal, rms=0.099450Jy sigma=0.000793 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=8.051 mas, bpa=-2.722 degrees ! Estimated noise=1555.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.009086 Jy ! Component: 100 - total flux cleaned = 0.0139215 Jy ! Component: 150 - total flux cleaned = 0.0166015 Jy ! Component: 200 - total flux cleaned = 0.0177055 Jy ! Total flux subtracted in 200 components = 0.0177055 Jy ! Clean residual min=-0.007603 max=0.009800 Jy/beam ! Clean residual mean=0.000002 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.492633 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.492633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098423Jy sigma=0.000788 ! Fit after self-cal, rms=0.098425Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.97 KP 1.02 ! LA 1.02 MK 1.01 NL 0.97 OV 1.01 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00 KP 1.00 ! LA 0.97 MK 1.01 NL 1.03 OV 1.16 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00 KP 1.00 ! LA 0.99 MK 1.00 NL 0.97 OV 0.96 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00 KP 1.00* ! LA 0.85 MK 1.05 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.098425Jy sigma=0.000788 ! Fit after self-cal, rms=0.092980Jy sigma=0.000752 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=8.065 mas, bpa=-2.363 degrees ! Estimated noise=1567.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115465 Jy ! Component: 100 - total flux cleaned = -0.00110918 Jy ! Component: 150 - total flux cleaned = -0.00107034 Jy ! Component: 200 - total flux cleaned = -0.00107077 Jy ! Total flux subtracted in 200 components = -0.00107077 Jy ! Clean residual min=-0.007307 max=0.008725 Jy/beam ! Clean residual mean=-0.000001 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.491562 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.491562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092921Jy sigma=0.000752 ! Fit after self-cal, rms=0.092894Jy sigma=0.000752 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092894Jy sigma=0.000752 ! Fit after self-cal, rms=0.086348Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=8.096 mas, bpa=-2.212 degrees ! Estimated noise=1574.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011944 Jy ! Component: 100 - total flux cleaned = 0.00119838 Jy ! Component: 150 - total flux cleaned = 0.00115339 Jy ! Component: 200 - total flux cleaned = 0.00111172 Jy ! Total flux subtracted in 200 components = 0.00111172 Jy ! Clean residual min=-0.004540 max=0.005391 Jy/beam ! Clean residual mean=-0.000002 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.492673 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.492674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086257Jy sigma=0.000676 ! Fit after self-cal, rms=0.086321Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26, 67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462575 Jy ! Component: 100 - total flux cleaned = 0.00497061 Jy ! Component: 150 - total flux cleaned = 0.00488569 Jy ! Component: 200 - total flux cleaned = 0.00473196 Jy ! Total flux subtracted in 200 components = 0.00473196 Jy ! Clean residual min=-0.004060 max=0.004379 Jy/beam ! Clean residual mean=-0.000004 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.497405 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.497405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085930Jy sigma=0.000674 ! Fit after self-cal, rms=0.085896Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085896Jy sigma=0.000673 ! Fit after self-cal, rms=0.084722Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.089 mas, bpa=-2.191 degrees ! Estimated noise=1572.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163228 Jy ! Component: 100 - total flux cleaned = 0.00181483 Jy ! Component: 150 - total flux cleaned = 0.00173467 Jy ! Component: 200 - total flux cleaned = 0.00173606 Jy ! Total flux subtracted in 200 components = 0.00173606 Jy ! Clean residual min=-0.004401 max=0.003547 Jy/beam ! Clean residual mean=-0.000006 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.499141 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.499141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084659Jy sigma=0.000664 ! Fit after self-cal, rms=0.084655Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09878e-05 Jy ! Component: 100 - total flux cleaned = 0.000124497 Jy ! Component: 150 - total flux cleaned = 0.000124398 Jy ! Component: 200 - total flux cleaned = 0.000154604 Jy ! Total flux subtracted in 200 components = 0.000154604 Jy ! Clean residual min=-0.004363 max=0.003535 Jy/beam ! Clean residual mean=-0.000006 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.499296 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.499296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084625Jy sigma=0.000664 ! Fit after self-cal, rms=0.084622Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084622Jy sigma=0.000664 ! Fit after self-cal, rms=0.084652Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=15.34 mas, bpa=-2.453 degrees ! Estimated noise=1962.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108994 Jy ! Component: 100 - total flux cleaned = -0.000883569 Jy ! Component: 150 - total flux cleaned = -0.00071404 Jy ! Component: 200 - total flux cleaned = -0.000594144 Jy ! Total flux subtracted in 200 components = -0.000594144 Jy ! Clean residual min=-0.004294 max=0.003942 Jy/beam ! Clean residual mean=-0.000010 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.498702 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.498702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084660Jy sigma=0.000664 ! Fit after self-cal, rms=0.084649Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114565 Jy ! Component: 100 - total flux cleaned = -6.8333e-06 Jy ! Component: 150 - total flux cleaned = 8.28009e-05 Jy ! Component: 200 - total flux cleaned = 0.000163473 Jy ! Total flux subtracted in 200 components = 0.000163473 Jy ! Clean residual min=-0.004275 max=0.003889 Jy/beam ! Clean residual mean=-0.000010 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.498865 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.498865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084659Jy sigma=0.000664 ! Fit after self-cal, rms=0.084652Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.092 mas, bpa=-2.162 degrees ! Estimated noise=1572.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.092 at -2.162 degrees (North through East) ! Clean map min=-0.0041711 max=0.46063 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=6.835 mas, bpa=-2.764 degrees ! Estimated noise=1895.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.360314 Jy ! Component: 100 - total flux cleaned = 0.439583 Jy ! Component: 150 - total flux cleaned = 0.463852 Jy ! Component: 200 - total flux cleaned = 0.473747 Jy ! Total flux subtracted in 200 components = 0.473747 Jy ! Clean residual min=-0.005391 max=0.005409 Jy/beam ! Clean residual mean=-0.000018 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.473747 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.473747 Jy ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.092 mas, bpa=-2.162 degrees ! Estimated noise=1572.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897986 Jy ! Component: 100 - total flux cleaned = 0.0145125 Jy ! Component: 150 - total flux cleaned = 0.0183975 Jy ! Component: 200 - total flux cleaned = 0.0212319 Jy ! Total flux subtracted in 200 components = 0.0212319 Jy ! Clean residual min=-0.004308 max=0.003540 Jy/beam ! Clean residual mean=-0.000007 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.494978 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 63 components and 0.494979 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=15.34 mas, bpa=-2.453 degrees ! Estimated noise=1962.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290009 Jy ! Component: 100 - total flux cleaned = 0.0045204 Jy ! Component: 150 - total flux cleaned = 0.00481807 Jy ! Component: 200 - total flux cleaned = 0.00495055 Jy ! Total flux subtracted in 200 components = 0.00495055 Jy ! Clean residual min=-0.004132 max=0.003730 Jy/beam ! Clean residual mean=-0.000010 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.499929 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.34497e-05 Jy ! Component: 100 - total flux cleaned = 0.000123378 Jy ! Component: 150 - total flux cleaned = 0.000161049 Jy ! Component: 200 - total flux cleaned = 0.000198001 Jy ! Total flux subtracted in 200 components = 0.000198001 Jy ! Clean residual min=-0.004113 max=0.003691 Jy/beam ! Clean residual mean=-0.000010 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.500127 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 106 components and 0.500127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.092 mas, bpa=-2.162 degrees ! Estimated noise=1572.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.3535e-06 Jy ! Component: 100 - total flux cleaned = 6.38921e-05 Jy ! Component: 150 - total flux cleaned = 0.000112799 Jy ! Component: 200 - total flux cleaned = 0.000203908 Jy ! Total flux subtracted in 200 components = 0.000203908 Jy ! Clean residual min=-0.004150 max=0.003636 Jy/beam ! Clean residual mean=-0.000006 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.500331 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.500331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084510Jy sigma=0.000663 ! Fit after self-cal, rms=0.084487Jy sigma=0.000663 wmodel J0050-0929_S_2017_06_10_pus_map.mod ! Writing 125 model components to file: J0050-0929_S_2017_06_10_pus_map.mod wobs J0050-0929_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0050-0929_S_2017_06_10_pus_uvs.fits wwins J0050-0929_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J0050-0929_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109292 Jy ! Component: 100 - total flux cleaned = -0.00167204 Jy ! Component: 150 - total flux cleaned = -0.00227921 Jy ! Component: 200 - total flux cleaned = -0.00285796 Jy ! Component: 250 - total flux cleaned = -0.0031906 Jy ! Component: 300 - total flux cleaned = -0.00356723 Jy ! Component: 350 - total flux cleaned = -0.00382757 Jy ! Component: 400 - total flux cleaned = -0.0040817 Jy ! Component: 450 - total flux cleaned = -0.00442886 Jy ! Component: 500 - total flux cleaned = -0.00476937 Jy ! Component: 550 - total flux cleaned = -0.00519769 Jy ! Component: 600 - total flux cleaned = -0.00552416 Jy ! Component: 650 - total flux cleaned = -0.00584456 Jy ! Component: 700 - total flux cleaned = -0.00606887 Jy ! Component: 750 - total flux cleaned = -0.00629057 Jy ! Component: 800 - total flux cleaned = -0.00668142 Jy ! Component: 850 - total flux cleaned = -0.00698009 Jy ! Component: 900 - total flux cleaned = -0.00727385 Jy ! Component: 950 - total flux cleaned = -0.00756313 Jy ! Component: 1000 - total flux cleaned = -0.0079286 Jy ! Component: 1050 - total flux cleaned = -0.00812931 Jy ! Component: 1100 - total flux cleaned = -0.00840535 Jy ! Component: 1150 - total flux cleaned = -0.00856117 Jy ! Component: 1200 - total flux cleaned = -0.00890555 Jy ! Component: 1250 - total flux cleaned = -0.0090187 Jy ! Component: 1300 - total flux cleaned = -0.00924201 Jy ! Component: 1350 - total flux cleaned = -0.00931566 Jy ! Component: 1400 - total flux cleaned = -0.00960654 Jy ! Component: 1450 - total flux cleaned = -0.00974932 Jy ! Component: 1500 - total flux cleaned = -0.00996155 Jy ! Component: 1550 - total flux cleaned = -0.0101023 Jy ! Component: 1600 - total flux cleaned = -0.0102745 Jy ! Component: 1650 - total flux cleaned = -0.0102405 Jy ! Component: 1700 - total flux cleaned = -0.0103768 Jy ! Component: 1750 - total flux cleaned = -0.0105441 Jy ! Component: 1800 - total flux cleaned = -0.0106765 Jy ! Component: 1850 - total flux cleaned = -0.0107752 Jy ! Component: 1900 - total flux cleaned = -0.0109379 Jy ! Component: 1950 - total flux cleaned = -0.0110987 Jy ! Component: 2000 - total flux cleaned = -0.0111943 Jy ! Component: 2050 - total flux cleaned = -0.0113838 Jy ! Component: 2100 - total flux cleaned = -0.0113838 Jy ! Component: 2150 - total flux cleaned = -0.0116314 Jy ! Component: 2200 - total flux cleaned = -0.0116621 Jy ! Component: 2250 - total flux cleaned = -0.0117534 Jy ! Component: 2300 - total flux cleaned = -0.0119945 Jy ! Component: 2350 - total flux cleaned = -0.0120244 Jy ! Component: 2400 - total flux cleaned = -0.012262 Jy ! Component: 2450 - total flux cleaned = -0.0122624 Jy ! Component: 2500 - total flux cleaned = -0.0124374 Jy ! Component: 2550 - total flux cleaned = -0.0123504 Jy ! Component: 2600 - total flux cleaned = -0.0125229 Jy ! Component: 2650 - total flux cleaned = -0.0125229 Jy ! Component: 2700 - total flux cleaned = -0.0126927 Jy ! Component: 2750 - total flux cleaned = -0.0127487 Jy ! Component: 2800 - total flux cleaned = -0.0127768 Jy ! Component: 2850 - total flux cleaned = -0.012888 Jy ! Component: 2900 - total flux cleaned = -0.012833 Jy ! Component: 2950 - total flux cleaned = -0.0129969 Jy ! Component: 3000 - total flux cleaned = -0.0129968 Jy ! Component: 3050 - total flux cleaned = -0.0130509 Jy ! Component: 3100 - total flux cleaned = -0.0130508 Jy ! Component: 3150 - total flux cleaned = -0.0131039 Jy ! Component: 3200 - total flux cleaned = -0.0131567 Jy ! Component: 3250 - total flux cleaned = -0.0132089 Jy ! Component: 3300 - total flux cleaned = -0.0132867 Jy ! Component: 3350 - total flux cleaned = -0.0133383 Jy ! Component: 3400 - total flux cleaned = -0.0134409 Jy ! Component: 3450 - total flux cleaned = -0.0133389 Jy ! Component: 3500 - total flux cleaned = -0.0134909 Jy ! Component: 3550 - total flux cleaned = -0.0135411 Jy ! Component: 3600 - total flux cleaned = -0.0134661 Jy ! Component: 3650 - total flux cleaned = -0.0135407 Jy ! Component: 3700 - total flux cleaned = -0.0136885 Jy ! Component: 3750 - total flux cleaned = -0.0136148 Jy ! Component: 3800 - total flux cleaned = -0.0137122 Jy ! Component: 3850 - total flux cleaned = -0.0137607 Jy ! Component: 3900 - total flux cleaned = -0.0138328 Jy ! Component: 3950 - total flux cleaned = -0.013857 Jy ! Component: 4000 - total flux cleaned = -0.0139047 Jy ! Component: 4050 - total flux cleaned = -0.0139992 Jy ! Total flux subtracted in 4096 components = -0.0140698 Jy ! Clean residual min=-0.001324 max=0.001353 Jy/beam ! Clean residual mean=-0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.486261 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 410 components and 0.486261 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.092 at -2.162 degrees (North through East) ! Clean map min=-0.0027761 max=0.46333 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.463329 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000434702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.281464 0.281464 0.562928 1.12586 2.25171 4.50343 9.00686 18.0137 36.0274 72.0548 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.463 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.092 at -2.162 degrees (North through East) ! Clean map min=-0.0027761 max=0.46333 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0050-0929_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:08 2019