! Started logfile: J0050-0929_S_2017_04_28_pus_uvs.log on Thu May 2 16:13:35 2019 obs J0050-0929_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0050-0929_S_2017_04_28_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.649673 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0050-0929_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.606666Jy sigma=0.004517 ! Fit after self-cal, rms=0.602378Jy sigma=0.004499 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.476 mas, bpa=-8.145 degrees ! Estimated noise=2837.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314379 Jy ! Component: 100 - total flux cleaned = 0.384024 Jy ! Total flux subtracted in 100 components = 0.384024 Jy ! Clean residual min=-0.015324 max=0.025116 Jy/beam ! Clean residual mean=0.000061 rms=0.004298 Jy/beam ! Combined flux in latest and established models = 0.384024 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.384024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111653Jy sigma=0.000743 ! Fit after self-cal, rms=0.111652Jy sigma=0.000743 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.174 mas, bpa=-8.154 degrees ! Estimated noise=2378.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253143 Jy ! Component: 100 - total flux cleaned = 0.0369894 Jy ! Component: 150 - total flux cleaned = 0.0429768 Jy ! Component: 200 - total flux cleaned = 0.0463226 Jy ! Total flux subtracted in 200 components = 0.0463226 Jy ! Clean residual min=-0.009111 max=0.010242 Jy/beam ! Clean residual mean=0.000008 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.430347 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 34 components and 0.430347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105781Jy sigma=0.000702 ! Fit after self-cal, rms=0.105795Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.00 KP 1.00 ! LA 1.06 MK 0.97 NL 0.97 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 1.03 KP 0.96 ! LA 1.02 MK 0.94 NL 1.08 OV 1.02 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.01 KP 1.00 ! LA 1.05 MK 0.97 NL 0.97 OV 0.95 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.88 KP 1.00* ! LA 0.75 MK 1.52 NL 1.00* OV 1.00* ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.105795Jy sigma=0.000702 ! Fit after self-cal, rms=0.099020Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.199 mas, bpa=-8.112 degrees ! Estimated noise=2372.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817247 Jy ! Component: 100 - total flux cleaned = 0.000965391 Jy ! Component: 150 - total flux cleaned = 0.00100177 Jy ! Component: 200 - total flux cleaned = 0.0010348 Jy ! Total flux subtracted in 200 components = 0.0010348 Jy ! Clean residual min=-0.005363 max=0.007035 Jy/beam ! Clean residual mean=0.000005 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.431382 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.431382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098984Jy sigma=0.000664 ! Fit after self-cal, rms=0.098960Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098960Jy sigma=0.000664 ! Fit after self-cal, rms=0.098923Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=8.201 mas, bpa=-8.162 degrees ! Estimated noise=2371.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175996 Jy ! Component: 100 - total flux cleaned = 0.000118069 Jy ! Component: 150 - total flux cleaned = 0.000165472 Jy ! Component: 200 - total flux cleaned = 0.000208854 Jy ! Total flux subtracted in 200 components = 0.000208854 Jy ! Clean residual min=-0.005347 max=0.006943 Jy/beam ! Clean residual mean=0.000005 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.431591 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.431591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098910Jy sigma=0.000663 ! Fit after self-cal, rms=0.098906Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83.5, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519845 Jy ! Component: 100 - total flux cleaned = 0.00562685 Jy ! Component: 150 - total flux cleaned = 0.00577466 Jy ! Component: 200 - total flux cleaned = 0.00591194 Jy ! Total flux subtracted in 200 components = 0.00591194 Jy ! Clean residual min=-0.005392 max=0.005507 Jy/beam ! Clean residual mean=0.000006 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.437503 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.437503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098521Jy sigma=0.000661 ! Fit after self-cal, rms=0.098520Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098520Jy sigma=0.000661 ! Fit after self-cal, rms=0.098380Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.207 mas, bpa=-8.175 degrees ! Estimated noise=2367.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167569 Jy ! Component: 100 - total flux cleaned = 0.000108937 Jy ! Component: 150 - total flux cleaned = 5.72967e-05 Jy ! Component: 200 - total flux cleaned = 5.74685e-05 Jy ! Total flux subtracted in 200 components = 5.74685e-05 Jy ! Clean residual min=-0.005266 max=0.005406 Jy/beam ! Clean residual mean=0.000003 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.43756 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.43756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098302Jy sigma=0.000660 ! Fit after self-cal, rms=0.098304Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.95791e-05 Jy ! Component: 100 - total flux cleaned = -5.04238e-06 Jy ! Component: 150 - total flux cleaned = 7.95485e-05 Jy ! Component: 200 - total flux cleaned = 8.01912e-05 Jy ! Total flux subtracted in 200 components = 8.01912e-05 Jy ! Clean residual min=-0.005234 max=0.005429 Jy/beam ! Clean residual mean=0.000003 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.43764 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.43764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098260Jy sigma=0.000660 ! Fit after self-cal, rms=0.098260Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098260Jy sigma=0.000660 ! Fit after self-cal, rms=0.098247Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=13.92 mas, bpa=-8.42 degrees ! Estimated noise=2902.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.6179e-05 Jy ! Component: 100 - total flux cleaned = 0.000266946 Jy ! Component: 150 - total flux cleaned = 0.000415197 Jy ! Component: 200 - total flux cleaned = 0.00049856 Jy ! Total flux subtracted in 200 components = 0.00049856 Jy ! Clean residual min=-0.005698 max=0.005659 Jy/beam ! Clean residual mean=-0.000000 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.438139 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.438139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098264Jy sigma=0.000660 ! Fit after self-cal, rms=0.098251Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167532 Jy ! Component: 100 - total flux cleaned = 0.000209374 Jy ! Component: 150 - total flux cleaned = 0.000280231 Jy ! Component: 200 - total flux cleaned = 0.000313429 Jy ! Total flux subtracted in 200 components = 0.000313429 Jy ! Clean residual min=-0.005522 max=0.005543 Jy/beam ! Clean residual mean=-0.000001 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.438452 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.438452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098266Jy sigma=0.000660 ! Fit after self-cal, rms=0.098255Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.207 mas, bpa=-8.157 degrees ! Estimated noise=2368.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 8.207 at -8.157 degrees (North through East) ! Clean map min=-0.0047296 max=0.40265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=7.522 mas, bpa=-7.843 degrees ! Estimated noise=2832.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.313615 Jy ! Component: 100 - total flux cleaned = 0.382337 Jy ! Component: 150 - total flux cleaned = 0.403673 Jy ! Component: 200 - total flux cleaned = 0.414757 Jy ! Total flux subtracted in 200 components = 0.414757 Jy ! Clean residual min=-0.007005 max=0.008001 Jy/beam ! Clean residual mean=0.000020 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.414757 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.414757 Jy ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.207 mas, bpa=-8.157 degrees ! Estimated noise=2368.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (88.5, 97). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884767 Jy ! Component: 100 - total flux cleaned = 0.014248 Jy ! Component: 150 - total flux cleaned = 0.0174182 Jy ! Component: 200 - total flux cleaned = 0.0189691 Jy ! Total flux subtracted in 200 components = 0.0189691 Jy ! Clean residual min=-0.005329 max=0.005812 Jy/beam ! Clean residual mean=0.000010 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.433726 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.433726 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=13.92 mas, bpa=-8.42 degrees ! Estimated noise=2902.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000841415 Jy ! Component: 100 - total flux cleaned = 0.000535788 Jy ! Component: 150 - total flux cleaned = 0.000443978 Jy ! Component: 200 - total flux cleaned = 0.000359604 Jy ! Total flux subtracted in 200 components = 0.000359604 Jy ! Clean residual min=-0.005920 max=0.004802 Jy/beam ! Clean residual mean=0.000004 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.434086 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134859 Jy ! Component: 100 - total flux cleaned = 0.000255539 Jy ! Component: 150 - total flux cleaned = 0.000363526 Jy ! Component: 200 - total flux cleaned = 0.000415076 Jy ! Total flux subtracted in 200 components = 0.000415076 Jy ! Clean residual min=-0.005313 max=0.004800 Jy/beam ! Clean residual mean=-0.000001 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.434501 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 71 components and 0.434501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.207 mas, bpa=-8.157 degrees ! Estimated noise=2368.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000981887 Jy ! Component: 100 - total flux cleaned = 0.00131201 Jy ! Component: 150 - total flux cleaned = 0.00160719 Jy ! Component: 200 - total flux cleaned = 0.00167587 Jy ! Total flux subtracted in 200 components = 0.00167587 Jy ! Clean residual min=-0.004876 max=0.005482 Jy/beam ! Clean residual mean=0.000000 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.436177 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.436177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098211Jy sigma=0.000660 ! Fit after self-cal, rms=0.098191Jy sigma=0.000659 wmodel J0050-0929_S_2017_04_28_pus_map.mod ! Writing 88 model components to file: J0050-0929_S_2017_04_28_pus_map.mod wobs J0050-0929_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0050-0929_S_2017_04_28_pus_uvs.fits wwins J0050-0929_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0050-0929_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320682 Jy ! Component: 100 - total flux cleaned = -0.000271857 Jy ! Component: 150 - total flux cleaned = -0.000741532 Jy ! Component: 200 - total flux cleaned = -0.00141622 Jy ! Component: 250 - total flux cleaned = -0.00184764 Jy ! Component: 300 - total flux cleaned = -0.00226097 Jy ! Component: 350 - total flux cleaned = -0.00265705 Jy ! Component: 400 - total flux cleaned = -0.00303866 Jy ! Component: 450 - total flux cleaned = -0.00309936 Jy ! Component: 500 - total flux cleaned = -0.00322047 Jy ! Component: 550 - total flux cleaned = -0.0034519 Jy ! Component: 600 - total flux cleaned = -0.00345271 Jy ! Component: 650 - total flux cleaned = -0.00356129 Jy ! Component: 700 - total flux cleaned = -0.00356006 Jy ! Component: 750 - total flux cleaned = -0.00335368 Jy ! Component: 800 - total flux cleaned = -0.00340433 Jy ! Component: 850 - total flux cleaned = -0.00320762 Jy ! Component: 900 - total flux cleaned = -0.0030643 Jy ! Component: 950 - total flux cleaned = -0.00297192 Jy ! Component: 1000 - total flux cleaned = -0.00278881 Jy ! Component: 1050 - total flux cleaned = -0.00269991 Jy ! Component: 1100 - total flux cleaned = -0.00256862 Jy ! Component: 1150 - total flux cleaned = -0.00261226 Jy ! Component: 1200 - total flux cleaned = -0.00261212 Jy ! Component: 1250 - total flux cleaned = -0.00257033 Jy ! Component: 1300 - total flux cleaned = -0.00261082 Jy ! Component: 1350 - total flux cleaned = -0.00249038 Jy ! Component: 1400 - total flux cleaned = -0.00245053 Jy ! Component: 1450 - total flux cleaned = -0.00237254 Jy ! Component: 1500 - total flux cleaned = -0.00233446 Jy ! Component: 1550 - total flux cleaned = -0.00222223 Jy ! Component: 1600 - total flux cleaned = -0.00214869 Jy ! Component: 1650 - total flux cleaned = -0.00200474 Jy ! Component: 1700 - total flux cleaned = -0.00196936 Jy ! Component: 1750 - total flux cleaned = -0.00172427 Jy ! Component: 1800 - total flux cleaned = -0.00162185 Jy ! Component: 1850 - total flux cleaned = -0.00145282 Jy ! Component: 1900 - total flux cleaned = -0.00131957 Jy ! Component: 1950 - total flux cleaned = -0.00115496 Jy ! Component: 2000 - total flux cleaned = -0.000992943 Jy ! Component: 2050 - total flux cleaned = -0.000865311 Jy ! Component: 2100 - total flux cleaned = -0.000771036 Jy ! Component: 2150 - total flux cleaned = -0.000677378 Jy ! Component: 2200 - total flux cleaned = -0.000677218 Jy ! Component: 2250 - total flux cleaned = -0.000586266 Jy ! Component: 2300 - total flux cleaned = -0.00055639 Jy ! Component: 2350 - total flux cleaned = -0.000467556 Jy ! Component: 2400 - total flux cleaned = -0.000438507 Jy ! Component: 2450 - total flux cleaned = -0.000467657 Jy ! Component: 2500 - total flux cleaned = -0.00046739 Jy ! Component: 2550 - total flux cleaned = -0.000297308 Jy ! Component: 2600 - total flux cleaned = -0.000297056 Jy ! Component: 2650 - total flux cleaned = -0.000157824 Jy ! Component: 2700 - total flux cleaned = -0.000157817 Jy ! Component: 2750 - total flux cleaned = 5.6798e-06 Jy ! Component: 2800 - total flux cleaned = 5.92832e-05 Jy ! Component: 2850 - total flux cleaned = 0.000139339 Jy ! Component: 2900 - total flux cleaned = 0.00019178 Jy ! Component: 2950 - total flux cleaned = 0.00024414 Jy ! Component: 3000 - total flux cleaned = 0.000269954 Jy ! Component: 3050 - total flux cleaned = 0.00044962 Jy ! Component: 3100 - total flux cleaned = 0.00055137 Jy ! Component: 3150 - total flux cleaned = 0.000601965 Jy ! Component: 3200 - total flux cleaned = 0.000626974 Jy ! Component: 3250 - total flux cleaned = 0.000775696 Jy ! Component: 3300 - total flux cleaned = 0.000947276 Jy ! Component: 3350 - total flux cleaned = 0.00101996 Jy ! Component: 3400 - total flux cleaned = 0.00109207 Jy ! Component: 3450 - total flux cleaned = 0.00121135 Jy ! Component: 3500 - total flux cleaned = 0.00128232 Jy ! Component: 3550 - total flux cleaned = 0.00139977 Jy ! Component: 3600 - total flux cleaned = 0.00142307 Jy ! Component: 3650 - total flux cleaned = 0.00151573 Jy ! Component: 3700 - total flux cleaned = 0.00163048 Jy ! Component: 3750 - total flux cleaned = 0.00169888 Jy ! Component: 3800 - total flux cleaned = 0.00176667 Jy ! Component: 3850 - total flux cleaned = 0.00190123 Jy ! Component: 3900 - total flux cleaned = 0.001901 Jy ! Component: 3950 - total flux cleaned = 0.00201164 Jy ! Component: 4000 - total flux cleaned = 0.00207753 Jy ! Component: 4050 - total flux cleaned = 0.00214282 Jy ! Total flux subtracted in 4096 components = 0.00214267 Jy ! Clean residual min=-0.001327 max=0.001217 Jy/beam ! Clean residual mean=-0.000002 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.43832 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 323 components and 0.438319 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 8.207 at -8.157 degrees (North through East) ! Clean map min=-0.0028994 max=0.40123 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.401234 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000372072 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.278196 0.278196 0.556392 1.11278 2.22557 4.45114 8.90228 17.8046 35.6091 71.2182 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.401 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.314 x 8.207 at -8.157 degrees (North through East) ! Clean map min=-0.0028994 max=0.40123 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0050-0929_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:13:39 2019