! Started logfile: J0047+2435_S_2017_06_10_pus_uvs.log on Mon May 6 14:39:57 2019 obs J0047+2435_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0047+2435_S_2017_06_10_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976389 visibilities/baseline/integration-bin. ! Found source: J0047+2435 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 25308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0047+2435_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 747 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915596Jy sigma=0.009832 ! Fit after self-cal, rms=0.906460Jy sigma=0.009744 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=6.349 mas, bpa=-6.426 degrees ! Estimated noise=624.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072513 Jy ! Component: 100 - total flux cleaned = 0.0902284 Jy ! Total flux subtracted in 100 components = 0.0902284 Jy ! Clean residual min=-0.003657 max=0.008406 Jy/beam ! Clean residual mean=-0.000006 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.0902284 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0902284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069986Jy sigma=0.000717 ! Fit after self-cal, rms=0.069985Jy sigma=0.000717 ! Inverting map ! Added new window around map position (-3.5, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00872321 Jy ! Component: 100 - total flux cleaned = 0.0136069 Jy ! Total flux subtracted in 100 components = 0.0136069 Jy ! Clean residual min=-0.003610 max=0.003472 Jy/beam ! Clean residual mean=-0.000004 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.103835 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.103835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068724Jy sigma=0.000703 ! Fit after self-cal, rms=0.068682Jy sigma=0.000702 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.159 mas, bpa=-5.023 degrees ! Estimated noise=471.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467321 Jy ! Component: 100 - total flux cleaned = 0.00737135 Jy ! Component: 150 - total flux cleaned = 0.00923809 Jy ! Component: 200 - total flux cleaned = 0.0105771 Jy ! Total flux subtracted in 200 components = 0.0105771 Jy ! Clean residual min=-0.003106 max=0.002646 Jy/beam ! Clean residual mean=-0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.114412 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.114412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068315Jy sigma=0.000698 ! Fit after self-cal, rms=0.068306Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 0.94 KP 1.01 ! LA 1.03 MK 1.04 NL 0.89 OV 1.01 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.99 HN 1.01 KP 0.98 ! LA 0.96 MK 0.99 NL 1.07 OV 1.03 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.96 KP 0.94 ! LA 0.99 MK 1.02 NL 1.10 OV 0.97 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.91 KP 1.00* ! LA 0.92 MK 1.12 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.068306Jy sigma=0.000698 ! Fit after self-cal, rms=0.068507Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=7.181 mas, bpa=-4.791 degrees ! Estimated noise=471.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114347 Jy ! Component: 100 - total flux cleaned = 0.00117894 Jy ! Component: 150 - total flux cleaned = 0.0011807 Jy ! Component: 200 - total flux cleaned = 0.00120368 Jy ! Total flux subtracted in 200 components = 0.00120368 Jy ! Clean residual min=-0.002890 max=0.002490 Jy/beam ! Clean residual mean=-0.000002 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.115616 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.115616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068472Jy sigma=0.000692 ! Fit after self-cal, rms=0.068492Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068492Jy sigma=0.000692 ! Fit after self-cal, rms=0.073049Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=7.144 mas, bpa=-4.834 degrees ! Estimated noise=473.783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.27233e-05 Jy ! Component: 100 - total flux cleaned = 0.000143172 Jy ! Component: 150 - total flux cleaned = 0.000165338 Jy ! Component: 200 - total flux cleaned = 0.000221748 Jy ! Total flux subtracted in 200 components = 0.000221748 Jy ! Clean residual min=-0.001281 max=0.001704 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.115838 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.115838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073034Jy sigma=0.000682 ! Fit after self-cal, rms=0.073107Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156943 Jy ! Component: 100 - total flux cleaned = 0.00184415 Jy ! Component: 150 - total flux cleaned = 0.00186812 Jy ! Component: 200 - total flux cleaned = 0.00196036 Jy ! Total flux subtracted in 200 components = 0.00196036 Jy ! Clean residual min=-0.001283 max=0.001477 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.117798 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.117798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073063Jy sigma=0.000681 ! Fit after self-cal, rms=0.073060Jy sigma=0.000681 ! Inverting map ! Added new window around map position (29.5, -101). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122151 Jy ! Component: 100 - total flux cleaned = 0.00141775 Jy ! Component: 150 - total flux cleaned = 0.0015331 Jy ! Component: 200 - total flux cleaned = 0.00163701 Jy ! Total flux subtracted in 200 components = 0.00163701 Jy ! Clean residual min=-0.001232 max=0.001390 Jy/beam ! Clean residual mean=0.000000 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.119435 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.119435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073032Jy sigma=0.000681 ! Fit after self-cal, rms=0.073027Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073027Jy sigma=0.000681 ! Fit after self-cal, rms=0.073887Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.135 mas, bpa=-4.802 degrees ! Estimated noise=472.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563523 Jy ! Component: 100 - total flux cleaned = 0.000666356 Jy ! Component: 150 - total flux cleaned = 0.000703812 Jy ! Component: 200 - total flux cleaned = 0.000738199 Jy ! Total flux subtracted in 200 components = 0.000738199 Jy ! Clean residual min=-0.001198 max=0.001351 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.120173 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.120173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073875Jy sigma=0.000680 ! Fit after self-cal, rms=0.073879Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.5, 122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120209 Jy ! Component: 100 - total flux cleaned = 0.00183136 Jy ! Component: 150 - total flux cleaned = 0.0023242 Jy ! Component: 200 - total flux cleaned = 0.00260382 Jy ! Total flux subtracted in 200 components = 0.00260382 Jy ! Clean residual min=-0.001315 max=0.001160 Jy/beam ! Clean residual mean=0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.122777 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.122777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073855Jy sigma=0.000680 ! Fit after self-cal, rms=0.073853Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073853Jy sigma=0.000680 ! Fit after self-cal, rms=0.073822Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.256 mas, bmaj=10.59 mas, bpa=-7.767 degrees ! Estimated noise=590.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634389 Jy ! Component: 100 - total flux cleaned = 0.000851376 Jy ! Component: 150 - total flux cleaned = 0.000939843 Jy ! Component: 200 - total flux cleaned = 0.00101916 Jy ! Total flux subtracted in 200 components = 0.00101916 Jy ! Clean residual min=-0.001478 max=0.001569 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.123796 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.123796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073820Jy sigma=0.000680 ! Fit after self-cal, rms=0.073819Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.21649e-05 Jy ! Component: 100 - total flux cleaned = 0.000116361 Jy ! Component: 150 - total flux cleaned = 0.000162044 Jy ! Component: 200 - total flux cleaned = 0.000183561 Jy ! Total flux subtracted in 200 components = 0.000183561 Jy ! Clean residual min=-0.001473 max=0.001588 Jy/beam ! Clean residual mean=0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.12398 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 159 components and 0.12398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073817Jy sigma=0.000680 ! Fit after self-cal, rms=0.073816Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.133 mas, bpa=-4.764 degrees ! Estimated noise=472.201 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 7.133 at -4.764 degrees (North through East) ! Clean map min=-0.00115 max=0.093512 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=6.329 mas, bpa=-6.11 degrees ! Estimated noise=627.983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726636 Jy ! Component: 100 - total flux cleaned = 0.091476 Jy ! Component: 150 - total flux cleaned = 0.100305 Jy ! Component: 200 - total flux cleaned = 0.105148 Jy ! Total flux subtracted in 200 components = 0.105148 Jy ! Clean residual min=-0.002209 max=0.002558 Jy/beam ! Clean residual mean=-0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.105148 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.105148 Jy ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.133 mas, bpa=-4.764 degrees ! Estimated noise=472.201 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378557 Jy ! Component: 100 - total flux cleaned = 0.00636423 Jy ! Component: 150 - total flux cleaned = 0.00837121 Jy ! Component: 200 - total flux cleaned = 0.010011 Jy ! Total flux subtracted in 200 components = 0.010011 Jy ! Clean residual min=-0.001333 max=0.001503 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.115159 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 63 components and 0.115159 Jy ! Inverting map ! Added new window around map position (18, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153036 Jy ! Component: 100 - total flux cleaned = 0.00273563 Jy ! Component: 150 - total flux cleaned = 0.0037862 Jy ! Component: 200 - total flux cleaned = 0.00471729 Jy ! Total flux subtracted in 200 components = 0.00471729 Jy ! Clean residual min=-0.001267 max=0.001212 Jy/beam ! Clean residual mean=0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.119876 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 90 components and 0.119876 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.256 mas, bmaj=10.59 mas, bpa=-7.767 degrees ! Estimated noise=590.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126849 Jy ! Component: 100 - total flux cleaned = 0.00222752 Jy ! Component: 150 - total flux cleaned = 0.00294161 Jy ! Component: 200 - total flux cleaned = 0.00346604 Jy ! Total flux subtracted in 200 components = 0.00346604 Jy ! Clean residual min=-0.001401 max=0.001620 Jy/beam ! Clean residual mean=0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.123342 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430806 Jy ! Component: 100 - total flux cleaned = 0.000671899 Jy ! Component: 150 - total flux cleaned = 0.000817469 Jy ! Component: 200 - total flux cleaned = 0.000918407 Jy ! Total flux subtracted in 200 components = 0.000918407 Jy ! Clean residual min=-0.001413 max=0.001593 Jy/beam ! Clean residual mean=0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.124261 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 154 components and 0.124261 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.133 mas, bpa=-4.764 degrees ! Estimated noise=472.201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181578 Jy ! Component: 100 - total flux cleaned = -5.9193e-05 Jy ! Component: 150 - total flux cleaned = 8.39558e-06 Jy ! Component: 200 - total flux cleaned = 5.10103e-05 Jy ! Total flux subtracted in 200 components = 5.10103e-05 Jy ! Clean residual min=-0.001296 max=0.001262 Jy/beam ! Clean residual mean=0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.124312 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 183 components and 0.124312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073820Jy sigma=0.000680 ! Fit after self-cal, rms=0.073811Jy sigma=0.000680 wmodel J0047+2435_S_2017_06_10_pus_map.mod ! Writing 183 model components to file: J0047+2435_S_2017_06_10_pus_map.mod wobs J0047+2435_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0047+2435_S_2017_06_10_pus_uvs.fits wwins J0047+2435_S_2017_06_10_pus_map.win ! wwins: Wrote 6 windows to J0047+2435_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235374 Jy ! Component: 100 - total flux cleaned = -0.000439639 Jy ! Component: 150 - total flux cleaned = -0.000534763 Jy ! Component: 200 - total flux cleaned = -0.000589644 Jy ! Component: 250 - total flux cleaned = -0.000695958 Jy ! Component: 300 - total flux cleaned = -0.000730399 Jy ! Component: 350 - total flux cleaned = -0.00081305 Jy ! Component: 400 - total flux cleaned = -0.000861187 Jy ! Component: 450 - total flux cleaned = -0.000924563 Jy ! Component: 500 - total flux cleaned = -0.000970942 Jy ! Component: 550 - total flux cleaned = -0.00101606 Jy ! Component: 600 - total flux cleaned = -0.00101583 Jy ! Component: 650 - total flux cleaned = -0.00104499 Jy ! Component: 700 - total flux cleaned = -0.00104495 Jy ! Component: 750 - total flux cleaned = -0.00104521 Jy ! Component: 800 - total flux cleaned = -0.00105935 Jy ! Component: 850 - total flux cleaned = -0.00110016 Jy ! Component: 900 - total flux cleaned = -0.0010597 Jy ! Component: 950 - total flux cleaned = -0.00109983 Jy ! Component: 1000 - total flux cleaned = -0.00109982 Jy ! Component: 1050 - total flux cleaned = -0.0010997 Jy ! Component: 1100 - total flux cleaned = -0.00108667 Jy ! Component: 1150 - total flux cleaned = -0.00104892 Jy ! Component: 1200 - total flux cleaned = -0.00103635 Jy ! Component: 1250 - total flux cleaned = -0.000999367 Jy ! Component: 1300 - total flux cleaned = -0.00102367 Jy ! Component: 1350 - total flux cleaned = -0.000902754 Jy ! Component: 1400 - total flux cleaned = -0.000938716 Jy ! Component: 1450 - total flux cleaned = -0.000844215 Jy ! Component: 1500 - total flux cleaned = -0.00085586 Jy ! Component: 1550 - total flux cleaned = -0.000832369 Jy ! Component: 1600 - total flux cleaned = -0.000786448 Jy ! Component: 1650 - total flux cleaned = -0.000775143 Jy ! Component: 1700 - total flux cleaned = -0.000752688 Jy ! Component: 1750 - total flux cleaned = -0.000741275 Jy ! Component: 1800 - total flux cleaned = -0.000696968 Jy ! Component: 1850 - total flux cleaned = -0.000653313 Jy ! Component: 1900 - total flux cleaned = -0.000653411 Jy ! Component: 1950 - total flux cleaned = -0.000610555 Jy ! Component: 2000 - total flux cleaned = -0.000589189 Jy ! Component: 2050 - total flux cleaned = -0.00054716 Jy ! Component: 2100 - total flux cleaned = -0.000536536 Jy ! Component: 2150 - total flux cleaned = -0.000515696 Jy ! Component: 2200 - total flux cleaned = -0.000443806 Jy ! Component: 2250 - total flux cleaned = -0.000423502 Jy ! Component: 2300 - total flux cleaned = -0.000403331 Jy ! Component: 2350 - total flux cleaned = -0.000393335 Jy ! Component: 2400 - total flux cleaned = -0.000373541 Jy ! Component: 2450 - total flux cleaned = -0.000334218 Jy ! Component: 2500 - total flux cleaned = -0.000343955 Jy ! Component: 2550 - total flux cleaned = -0.000276155 Jy ! Component: 2600 - total flux cleaned = -0.000256999 Jy ! Component: 2650 - total flux cleaned = -0.000256857 Jy ! Component: 2700 - total flux cleaned = -0.000181203 Jy ! Component: 2750 - total flux cleaned = -0.000190715 Jy ! Component: 2800 - total flux cleaned = -0.000162915 Jy ! Component: 2850 - total flux cleaned = -0.000125963 Jy ! Component: 2900 - total flux cleaned = -6.18647e-05 Jy ! Component: 2950 - total flux cleaned = -6.19307e-05 Jy ! Component: 3000 - total flux cleaned = -5.27682e-05 Jy ! Component: 3050 - total flux cleaned = 9.92158e-06 Jy ! Component: 3100 - total flux cleaned = 4.54799e-05 Jy ! Component: 3150 - total flux cleaned = 8.9597e-05 Jy ! Component: 3200 - total flux cleaned = 0.00012465 Jy ! Component: 3250 - total flux cleaned = 0.000168187 Jy ! Component: 3300 - total flux cleaned = 0.000211363 Jy ! Component: 3350 - total flux cleaned = 0.000245647 Jy ! Component: 3400 - total flux cleaned = 0.000262816 Jy ! Component: 3450 - total flux cleaned = 0.000322065 Jy ! Component: 3500 - total flux cleaned = 0.000338868 Jy ! Component: 3550 - total flux cleaned = 0.000338789 Jy ! Component: 3600 - total flux cleaned = 0.000372064 Jy ! Component: 3650 - total flux cleaned = 0.000429926 Jy ! Component: 3700 - total flux cleaned = 0.000429828 Jy ! Component: 3750 - total flux cleaned = 0.000429819 Jy ! Component: 3800 - total flux cleaned = 0.000486664 Jy ! Component: 3850 - total flux cleaned = 0.000510863 Jy ! Component: 3900 - total flux cleaned = 0.000534866 Jy ! Component: 3950 - total flux cleaned = 0.00055075 Jy ! Component: 4000 - total flux cleaned = 0.000598306 Jy ! Component: 4050 - total flux cleaned = 0.000574759 Jy ! Total flux subtracted in 4096 components = 0.000606046 Jy ! Clean residual min=-0.000434 max=0.000416 Jy/beam ! Clean residual mean=0.000001 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.124918 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 490 components and 0.124918 Jy ![Exited script file: muppet] wmap "J0047+2435_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 7.133 at -4.764 degrees (North through East) ! Clean map min=-0.0010378 max=0.093714 Jy/beam ! Writing clean map to FITS file: J0047+2435_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0937141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145438 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.465579 0.465579 0.931157 1.86231 3.72463 7.44926 14.8985 29.797 59.5941 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 7.133 at -4.764 degrees (North through East) ! Clean map min=-0.0010378 max=0.093714 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0047+2435_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:40:03 2019