! Started logfile: J0045-3900_S_2017_03_23_pus_uvs.log on Mon May 13 09:44:59 2019 obs J0045-3900_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0045-3900_S_2017_03_23_pus_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698198 visibilities/baseline/integration-bin. ! Found source: J0045-3900 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 18600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0045-3900_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 440 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 694 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952248Jy sigma=0.005210 ! Fit after self-cal, rms=0.911135Jy sigma=0.004994 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=6.317 mas, bpa=-7.177 degrees ! Estimated noise=1776.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734452 Jy ! Component: 100 - total flux cleaned = 0.0903686 Jy ! Total flux subtracted in 100 components = 0.0903686 Jy ! Clean residual min=-0.005547 max=0.006851 Jy/beam ! Clean residual mean=-0.000061 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.0903686 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0903686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127557Jy sigma=0.000648 ! Fit after self-cal, rms=0.127326Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=7.606 mas, bpa=-6.572 degrees ! Estimated noise=1101.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804854 Jy ! Component: 100 - total flux cleaned = 0.0114242 Jy ! Component: 150 - total flux cleaned = 0.0129598 Jy ! Component: 200 - total flux cleaned = 0.0136758 Jy ! Total flux subtracted in 200 components = 0.0136758 Jy ! Clean residual min=-0.004517 max=0.003760 Jy/beam ! Clean residual mean=-0.000039 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.104044 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 28 components and 0.104044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126809Jy sigma=0.000645 ! Fit after self-cal, rms=0.126748Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.94 HN 1.00* KP 1.09 ! LA 1.00 MK 1.00 NL 1.00* OV 1.12 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.00* KP 0.98 ! LA 0.96 MK 1.01 NL 1.10 OV 1.07 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.00* KP 0.89 ! LA 0.74 MK 1.06 NL 1.12 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.06 HN 1.00* KP 1.00* ! LA 0.76 MK 0.99 NL 1.00* OV 1.09 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.126748Jy sigma=0.000645 ! Fit after self-cal, rms=0.126074Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=7.625 mas, bpa=-6.439 degrees ! Estimated noise=1102.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305257 Jy ! Component: 100 - total flux cleaned = 0.000248051 Jy ! Component: 150 - total flux cleaned = 0.000265319 Jy ! Component: 200 - total flux cleaned = 0.000279893 Jy ! Total flux subtracted in 200 components = 0.000279893 Jy ! Clean residual min=-0.002869 max=0.002734 Jy/beam ! Clean residual mean=-0.000039 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.104324 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.104324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126069Jy sigma=0.000642 ! Fit after self-cal, rms=0.126144Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126144Jy sigma=0.000641 ! Fit after self-cal, rms=0.127080Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=7.625 mas, bpa=-6.368 degrees ! Estimated noise=1102.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273437 Jy ! Component: 100 - total flux cleaned = 0.000218156 Jy ! Component: 150 - total flux cleaned = 0.00020343 Jy ! Component: 200 - total flux cleaned = 0.000227972 Jy ! Total flux subtracted in 200 components = 0.000227972 Jy ! Clean residual min=-0.002861 max=0.002655 Jy/beam ! Clean residual mean=-0.000034 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.104552 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.104552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127075Jy sigma=0.000641 ! Fit after self-cal, rms=0.127135Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.72107e-06 Jy ! Component: 100 - total flux cleaned = -3.73204e-05 Jy ! Component: 150 - total flux cleaned = -3.68325e-05 Jy ! Component: 200 - total flux cleaned = -3.62536e-05 Jy ! Total flux subtracted in 200 components = -3.62536e-05 Jy ! Clean residual min=-0.002774 max=0.002654 Jy/beam ! Clean residual mean=-0.000035 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.104516 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.104516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127131Jy sigma=0.000641 ! Fit after self-cal, rms=0.127134Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127134Jy sigma=0.000641 ! Fit after self-cal, rms=0.127449Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=7.616 mas, bpa=-6.299 degrees ! Estimated noise=1103.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162201 Jy ! Component: 100 - total flux cleaned = 0.000134361 Jy ! Component: 150 - total flux cleaned = 0.00013631 Jy ! Component: 200 - total flux cleaned = 0.000157174 Jy ! Total flux subtracted in 200 components = 0.000157174 Jy ! Clean residual min=-0.002792 max=0.002653 Jy/beam ! Clean residual mean=-0.000033 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.104673 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.104673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127446Jy sigma=0.000641 ! Fit after self-cal, rms=0.127438Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.01814e-05 Jy ! Component: 100 - total flux cleaned = -2.32134e-05 Jy ! Component: 150 - total flux cleaned = -1.22266e-05 Jy ! Component: 200 - total flux cleaned = -1.22678e-05 Jy ! Total flux subtracted in 200 components = -1.22678e-05 Jy ! Clean residual min=-0.002705 max=0.002656 Jy/beam ! Clean residual mean=-0.000033 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.104661 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.104661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127436Jy sigma=0.000641 ! Fit after self-cal, rms=0.127436Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127436Jy sigma=0.000641 ! Fit after self-cal, rms=0.127513Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.207 mas, bmaj=26.24 mas, bpa=-1.221 degrees ! Estimated noise=1444.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050478 Jy ! Component: 100 - total flux cleaned = 0.000503113 Jy ! Component: 150 - total flux cleaned = 0.000502184 Jy ! Component: 200 - total flux cleaned = 0.00050175 Jy ! Total flux subtracted in 200 components = 0.00050175 Jy ! Clean residual min=-0.002337 max=0.002438 Jy/beam ! Clean residual mean=-0.000064 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.105163 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.105163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127513Jy sigma=0.000641 ! Fit after self-cal, rms=0.127513Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.89328e-06 Jy ! Component: 100 - total flux cleaned = 4.24666e-06 Jy ! Component: 150 - total flux cleaned = 4.92629e-06 Jy ! Component: 200 - total flux cleaned = 5.27779e-06 Jy ! Total flux subtracted in 200 components = 5.27779e-06 Jy ! Clean residual min=-0.002340 max=0.002440 Jy/beam ! Clean residual mean=-0.000064 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.105168 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 42 components and 0.105168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127515Jy sigma=0.000641 ! Fit after self-cal, rms=0.127512Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.606 mas, bpa=-6.243 degrees ! Estimated noise=1103.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.606 at -6.243 degrees (North through East) ! Clean map min=-0.0025593 max=0.0954 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.302 mas, bpa=-6.628 degrees ! Estimated noise=1788.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737239 Jy ! Component: 100 - total flux cleaned = 0.0909069 Jy ! Component: 150 - total flux cleaned = 0.0975179 Jy ! Component: 200 - total flux cleaned = 0.100916 Jy ! Total flux subtracted in 200 components = 0.100916 Jy ! Clean residual min=-0.004471 max=0.004564 Jy/beam ! Clean residual mean=-0.000036 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.100916 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.100916 Jy ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.606 mas, bpa=-6.243 degrees ! Estimated noise=1103.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371894 Jy ! Component: 100 - total flux cleaned = 0.00514149 Jy ! Component: 150 - total flux cleaned = 0.00513934 Jy ! Component: 200 - total flux cleaned = 0.00523445 Jy ! Total flux subtracted in 200 components = 0.00523445 Jy ! Clean residual min=-0.002721 max=0.002505 Jy/beam ! Clean residual mean=-0.000025 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.106151 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.106151 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.207 mas, bmaj=26.24 mas, bpa=-1.221 degrees ! Estimated noise=1444.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346548 Jy ! Component: 100 - total flux cleaned = 0.000299877 Jy ! Component: 150 - total flux cleaned = 0.00024368 Jy ! Component: 200 - total flux cleaned = 0.000193633 Jy ! Total flux subtracted in 200 components = 0.000193633 Jy ! Clean residual min=-0.002502 max=0.002300 Jy/beam ! Clean residual mean=-0.000050 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.106344 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.4388e-05 Jy ! Component: 100 - total flux cleaned = -6.71189e-05 Jy ! Component: 150 - total flux cleaned = -9.70968e-05 Jy ! Component: 200 - total flux cleaned = -0.000116047 Jy ! Total flux subtracted in 200 components = -0.000116047 Jy ! Clean residual min=-0.002495 max=0.002279 Jy/beam ! Clean residual mean=-0.000051 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.106228 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.106228 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.606 mas, bpa=-6.243 degrees ! Estimated noise=1103.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183417 Jy ! Component: 100 - total flux cleaned = -0.000149735 Jy ! Component: 150 - total flux cleaned = -0.000180979 Jy ! Component: 200 - total flux cleaned = -0.000209947 Jy ! Total flux subtracted in 200 components = -0.000209947 Jy ! Clean residual min=-0.002734 max=0.002443 Jy/beam ! Clean residual mean=-0.000026 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.106018 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.106018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127479Jy sigma=0.000640 ! Fit after self-cal, rms=0.127459Jy sigma=0.000640 wmodel J0045-3900_S_2017_03_23_pus_map.mod ! Writing 72 model components to file: J0045-3900_S_2017_03_23_pus_map.mod wobs J0045-3900_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0045-3900_S_2017_03_23_pus_uvs.fits wwins J0045-3900_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0045-3900_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239669 Jy ! Component: 100 - total flux cleaned = -0.000531019 Jy ! Component: 150 - total flux cleaned = -0.000645672 Jy ! Component: 200 - total flux cleaned = -0.00061063 Jy ! Component: 250 - total flux cleaned = -0.000681415 Jy ! Component: 300 - total flux cleaned = -0.000713997 Jy ! Component: 350 - total flux cleaned = -0.000584288 Jy ! Component: 400 - total flux cleaned = -0.000490973 Jy ! Component: 450 - total flux cleaned = -0.000430689 Jy ! Component: 500 - total flux cleaned = -0.000460066 Jy ! Component: 550 - total flux cleaned = -0.000346134 Jy ! Component: 600 - total flux cleaned = -0.000291477 Jy ! Component: 650 - total flux cleaned = -0.00023744 Jy ! Component: 700 - total flux cleaned = -0.000264105 Jy ! Component: 750 - total flux cleaned = -0.000237842 Jy ! Component: 800 - total flux cleaned = -0.000212923 Jy ! Component: 850 - total flux cleaned = -0.000237987 Jy ! Component: 900 - total flux cleaned = -0.000237793 Jy ! Component: 950 - total flux cleaned = -0.000213911 Jy ! Component: 1000 - total flux cleaned = -0.000237314 Jy ! Component: 1050 - total flux cleaned = -0.000214851 Jy ! Component: 1100 - total flux cleaned = -0.00025944 Jy ! Component: 1150 - total flux cleaned = -0.000237273 Jy ! Component: 1200 - total flux cleaned = -0.000258499 Jy ! Component: 1250 - total flux cleaned = -0.000258718 Jy ! Component: 1300 - total flux cleaned = -0.000403966 Jy ! Component: 1350 - total flux cleaned = -0.000424106 Jy ! Component: 1400 - total flux cleaned = -0.000404076 Jy ! Component: 1450 - total flux cleaned = -0.000364785 Jy ! Component: 1500 - total flux cleaned = -0.000423265 Jy ! Component: 1550 - total flux cleaned = -0.000346193 Jy ! Component: 1600 - total flux cleaned = -0.000327295 Jy ! Component: 1650 - total flux cleaned = -0.000289991 Jy ! Component: 1700 - total flux cleaned = -0.000271707 Jy ! Component: 1750 - total flux cleaned = -0.00025345 Jy ! Component: 1800 - total flux cleaned = -0.000235549 Jy ! Component: 1850 - total flux cleaned = -0.000253269 Jy ! Component: 1900 - total flux cleaned = -0.000253092 Jy ! Component: 1950 - total flux cleaned = -0.000166601 Jy ! Component: 2000 - total flux cleaned = -0.000166821 Jy ! Component: 2050 - total flux cleaned = -0.000116462 Jy ! Component: 2100 - total flux cleaned = -0.000166544 Jy ! Component: 2150 - total flux cleaned = -6.73489e-05 Jy ! Component: 2200 - total flux cleaned = -6.74543e-05 Jy ! Component: 2250 - total flux cleaned = 2.9363e-05 Jy ! Component: 2300 - total flux cleaned = 1.31923e-05 Jy ! Component: 2350 - total flux cleaned = 7.62615e-05 Jy ! Component: 2400 - total flux cleaned = 0.00013891 Jy ! Component: 2450 - total flux cleaned = 0.000201031 Jy ! Component: 2500 - total flux cleaned = 0.000246904 Jy ! Component: 2550 - total flux cleaned = 0.000323016 Jy ! Component: 2600 - total flux cleaned = 0.000368257 Jy ! Component: 2650 - total flux cleaned = 0.000428025 Jy ! Component: 2700 - total flux cleaned = 0.000442705 Jy ! Component: 2750 - total flux cleaned = 0.000486676 Jy ! Component: 2800 - total flux cleaned = 0.000501113 Jy ! Component: 2850 - total flux cleaned = 0.000558764 Jy ! Component: 2900 - total flux cleaned = 0.000544401 Jy ! Component: 2950 - total flux cleaned = 0.000587049 Jy ! Component: 3000 - total flux cleaned = 0.000629089 Jy ! Component: 3050 - total flux cleaned = 0.000629159 Jy ! Component: 3100 - total flux cleaned = 0.000657058 Jy ! Component: 3150 - total flux cleaned = 0.000643202 Jy ! Component: 3200 - total flux cleaned = 0.000697777 Jy ! Component: 3250 - total flux cleaned = 0.000684203 Jy ! Component: 3300 - total flux cleaned = 0.000724663 Jy ! Component: 3350 - total flux cleaned = 0.000751231 Jy ! Component: 3400 - total flux cleaned = 0.000777579 Jy ! Component: 3450 - total flux cleaned = 0.000790486 Jy ! Component: 3500 - total flux cleaned = 0.000790381 Jy ! Component: 3550 - total flux cleaned = 0.000751494 Jy ! Component: 3600 - total flux cleaned = 0.000777248 Jy ! Component: 3650 - total flux cleaned = 0.000751678 Jy ! Component: 3700 - total flux cleaned = 0.000751782 Jy ! Component: 3750 - total flux cleaned = 0.000751756 Jy ! Component: 3800 - total flux cleaned = 0.00075183 Jy ! Component: 3850 - total flux cleaned = 0.000776904 Jy ! Component: 3900 - total flux cleaned = 0.000739633 Jy ! Component: 3950 - total flux cleaned = 0.000739588 Jy ! Component: 4000 - total flux cleaned = 0.000715054 Jy ! Component: 4050 - total flux cleaned = 0.000739523 Jy ! Total flux subtracted in 4096 components = 0.000727357 Jy ! Clean residual min=-0.000845 max=0.000862 Jy/beam ! Clean residual mean=-0.000006 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.106746 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 310 components and 0.106746 Jy ![Exited script file: muppet] wmap "J0045-3900_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.606 at -6.243 degrees (North through East) ! Clean map min=-0.0018735 max=0.094381 Jy/beam ! Writing clean map to FITS file: J0045-3900_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0943812 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002105 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.669096 0.669096 1.33819 2.67638 5.35277 10.7055 21.4111 42.8221 85.6442 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.606 at -6.243 degrees (North through East) ! Clean map min=-0.0018735 max=0.094381 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0045-3900_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:45:05 2019