! Started logfile: J0045-3705_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:21 2019 obs J0045-3705_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0045-3705_S_2017_10_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.274425 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0045-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0045-3705_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.675151Jy sigma=0.004511 ! Fit after self-cal, rms=0.630667Jy sigma=0.004249 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.107 mas, bmaj=70.57 mas, bpa=11.26 degrees ! Estimated noise=3724.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278645 Jy ! Component: 100 - total flux cleaned = 0.359432 Jy ! Total flux subtracted in 100 components = 0.359432 Jy ! Clean residual min=-0.019608 max=0.031197 Jy/beam ! Clean residual mean=-0.000102 rms=0.010112 Jy/beam ! Combined flux in latest and established models = 0.359432 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.359432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122165Jy sigma=0.000715 ! Fit after self-cal, rms=0.122257Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.08 mas, bmaj=76.27 mas, bpa=13.56 degrees ! Estimated noise=3010.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297522 Jy ! Component: 100 - total flux cleaned = 0.0345242 Jy ! Component: 150 - total flux cleaned = 0.0351879 Jy ! Component: 200 - total flux cleaned = 0.0312899 Jy ! Total flux subtracted in 200 components = 0.0312899 Jy ! Clean residual min=-0.004867 max=0.004791 Jy/beam ! Clean residual mean=0.000009 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.390722 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 74 components and 0.390722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109817Jy sigma=0.000653 ! Fit after self-cal, rms=0.109610Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.03 ! LA 1.06 MK 1.00* NL 1.00* OV 1.02 ! PT 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00 ! LA 1.05 MK 1.00* NL 1.00* OV 1.02 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.99 ! LA 0.82 MK 1.00* NL 1.05 OV 0.93 ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.109610Jy sigma=0.000653 ! Fit after self-cal, rms=0.097182Jy sigma=0.000611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=76.8 mas, bpa=13.62 degrees ! Estimated noise=2985.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200076 Jy ! Component: 100 - total flux cleaned = -0.000686281 Jy ! Component: 150 - total flux cleaned = -0.000603714 Jy ! Component: 200 - total flux cleaned = -0.000596768 Jy ! Total flux subtracted in 200 components = -0.000596768 Jy ! Clean residual min=-0.001109 max=0.001092 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.390125 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 140 components and 0.390125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097015Jy sigma=0.000609 ! Fit after self-cal, rms=0.096873Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096873Jy sigma=0.000609 ! Fit after self-cal, rms=0.096933Jy sigma=0.000609 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.06 mas, bmaj=76.84 mas, bpa=13.63 degrees ! Estimated noise=2985.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340055 Jy ! Component: 100 - total flux cleaned = -0.000457994 Jy ! Component: 150 - total flux cleaned = -0.00068895 Jy ! Component: 200 - total flux cleaned = -0.000917678 Jy ! Total flux subtracted in 200 components = -0.000917678 Jy ! Clean residual min=-0.000949 max=0.000951 Jy/beam ! Clean residual mean=-0.000004 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.389207 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 193 components and 0.389207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096868Jy sigma=0.000609 ! Fit after self-cal, rms=0.096871Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110914 Jy ! Component: 100 - total flux cleaned = -0.000303972 Jy ! Component: 150 - total flux cleaned = -0.00059652 Jy ! Component: 200 - total flux cleaned = -0.000797966 Jy ! Total flux subtracted in 200 components = -0.000797966 Jy ! Clean residual min=-0.000864 max=0.000852 Jy/beam ! Clean residual mean=-0.000004 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.388409 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 252 components and 0.388409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096837Jy sigma=0.000608 ! Fit after self-cal, rms=0.096834Jy sigma=0.000608 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096834Jy sigma=0.000608 ! Fit after self-cal, rms=0.097008Jy sigma=0.000608 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=76.89 mas, bpa=13.63 degrees ! Estimated noise=2988.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354615 Jy ! Component: 100 - total flux cleaned = -0.000353911 Jy ! Component: 150 - total flux cleaned = -0.00039416 Jy ! Component: 200 - total flux cleaned = -0.000436428 Jy ! Total flux subtracted in 200 components = -0.000436428 Jy ! Clean residual min=-0.000682 max=0.000676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.387973 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 302 components and 0.387973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096977Jy sigma=0.000608 ! Fit after self-cal, rms=0.096981Jy sigma=0.000608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02723e-05 Jy ! Component: 100 - total flux cleaned = -1.05393e-05 Jy ! Component: 150 - total flux cleaned = -9.99353e-06 Jy ! Component: 200 - total flux cleaned = -1.00188e-05 Jy ! Total flux subtracted in 200 components = -1.00188e-05 Jy ! Clean residual min=-0.000568 max=0.000561 Jy/beam ! Clean residual mean=-0.000001 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.387963 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 357 components and 0.387963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096959Jy sigma=0.000608 ! Fit after self-cal, rms=0.096959Jy sigma=0.000608 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096959Jy sigma=0.000608 ! Fit after self-cal, rms=0.097072Jy sigma=0.000608 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.84 mas, bmaj=76.46 mas, bpa=13.8 degrees ! Estimated noise=2993.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157842 Jy ! Component: 100 - total flux cleaned = -0.000322904 Jy ! Component: 150 - total flux cleaned = -0.000527835 Jy ! Component: 200 - total flux cleaned = -0.000672288 Jy ! Total flux subtracted in 200 components = -0.000672288 Jy ! Clean residual min=-0.000603 max=0.000607 Jy/beam ! Clean residual mean=-0.000003 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.38729 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 405 components and 0.38729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097053Jy sigma=0.000608 ! Fit after self-cal, rms=0.097053Jy sigma=0.000608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269664 Jy ! Component: 100 - total flux cleaned = -0.000448144 Jy ! Component: 150 - total flux cleaned = -0.000477107 Jy ! Component: 200 - total flux cleaned = -0.000507373 Jy ! Total flux subtracted in 200 components = -0.000507373 Jy ! Clean residual min=-0.000496 max=0.000493 Jy/beam ! Clean residual mean=-0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.386783 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 453 components and 0.386783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097037Jy sigma=0.000608 ! Fit after self-cal, rms=0.097038Jy sigma=0.000608 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=76.92 mas, bpa=13.64 degrees ! Estimated noise=2990.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.07 x 76.92 at 13.64 degrees (North through East) ! Clean map min=-0.0064983 max=0.30592 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.089 mas, bmaj=71.52 mas, bpa=11.37 degrees ! Estimated noise=3721.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277162 Jy ! Component: 100 - total flux cleaned = 0.356212 Jy ! Component: 150 - total flux cleaned = 0.386594 Jy ! Component: 200 - total flux cleaned = 0.395712 Jy ! Total flux subtracted in 200 components = 0.395712 Jy ! Clean residual min=-0.007620 max=0.007662 Jy/beam ! Clean residual mean=-0.000041 rms=0.003123 Jy/beam ! Combined flux in latest and established models = 0.395712 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.395712 Jy ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=76.92 mas, bpa=13.64 degrees ! Estimated noise=2990.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282668 Jy ! Component: 100 - total flux cleaned = 0.00499894 Jy ! Component: 150 - total flux cleaned = 0.00510772 Jy ! Component: 200 - total flux cleaned = 0.00487797 Jy ! Total flux subtracted in 200 components = 0.00487797 Jy ! Clean residual min=-0.001885 max=0.001886 Jy/beam ! Clean residual mean=-0.000007 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.40059 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 139 components and 0.40059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.84 mas, bmaj=76.46 mas, bpa=13.8 degrees ! Estimated noise=2993.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107001 Jy ! Component: 100 - total flux cleaned = -0.000991007 Jy ! Component: 150 - total flux cleaned = -0.000990783 Jy ! Component: 200 - total flux cleaned = -0.00105354 Jy ! Total flux subtracted in 200 components = -0.00105354 Jy ! Clean residual min=-0.000903 max=0.000879 Jy/beam ! Clean residual mean=-0.000008 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.399536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208426 Jy ! Component: 100 - total flux cleaned = -0.000478838 Jy ! Component: 150 - total flux cleaned = -0.00065315 Jy ! Component: 200 - total flux cleaned = -0.000900983 Jy ! Total flux subtracted in 200 components = -0.000900983 Jy ! Clean residual min=-0.001078 max=0.001069 Jy/beam ! Clean residual mean=-0.000011 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.398635 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 245 components and 0.398635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=76.92 mas, bpa=13.64 degrees ! Estimated noise=2990.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013275 Jy ! Component: 100 - total flux cleaned = 0.000131788 Jy ! Component: 150 - total flux cleaned = 0.000174969 Jy ! Component: 200 - total flux cleaned = 0.00017662 Jy ! Total flux subtracted in 200 components = 0.00017662 Jy ! Clean residual min=-0.000589 max=0.000587 Jy/beam ! Clean residual mean=-0.000004 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.398812 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 301 components and 0.398812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097095Jy sigma=0.000608 ! Fit after self-cal, rms=0.097101Jy sigma=0.000608 wmodel J0045-3705_S_2017_10_21_pus_map.mod ! Writing 301 model components to file: J0045-3705_S_2017_10_21_pus_map.mod wobs J0045-3705_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0045-3705_S_2017_10_21_pus_uvs.fits wwins J0045-3705_S_2017_10_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0045-3705_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.07 x 76.92 at 13.64 degrees (North through East) ! Clean map min=-0.0062968 max=0.29937 Jy/beam ! Writing clean map to FITS file: J0045-3705_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.29937 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246462 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.24698 0.24698 0.49396 0.987921 1.97584 3.95168 7.90336 15.8067 31.6135 63.2269 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.299 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.07 x 76.92 at 13.64 degrees (North through East) ! Clean map min=-0.0062968 max=0.29937 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0045-3705_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:28 2019