! Started logfile: J0045-3705_S_2017_10_09_pus_uvs.log on Sun May 12 13:01:59 2019 obs J0045-3705_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0045-3705_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.337165 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0045-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 5632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0045-3705_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 416 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 476 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 476 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 879 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.742993Jy sigma=0.004346 ! Fit after self-cal, rms=0.700612Jy sigma=0.004100 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.628 mas, bmaj=32.48 mas, bpa=-11.09 degrees ! Estimated noise=2634.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224161 Jy ! Component: 100 - total flux cleaned = 0.307483 Jy ! Total flux subtracted in 100 components = 0.307483 Jy ! Clean residual min=-0.021250 max=0.038146 Jy/beam ! Clean residual mean=-0.000065 rms=0.008783 Jy/beam ! Combined flux in latest and established models = 0.307483 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.307483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155321Jy sigma=0.000825 ! Fit after self-cal, rms=0.155179Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.535 mas, bmaj=37.86 mas, bpa=-10.97 degrees ! Estimated noise=1975.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545994 Jy ! Component: 100 - total flux cleaned = 0.0817734 Jy ! Component: 150 - total flux cleaned = 0.0984364 Jy ! Component: 200 - total flux cleaned = 0.1095 Jy ! Total flux subtracted in 200 components = 0.1095 Jy ! Clean residual min=-0.020325 max=0.012552 Jy/beam ! Clean residual mean=-0.000292 rms=0.005343 Jy/beam ! Combined flux in latest and established models = 0.416982 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 111 components and 0.416982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134020Jy sigma=0.000707 ! Fit after self-cal, rms=0.134061Jy sigma=0.000707 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.92 HN 1.13 KP 1.04 ! LA 1.03 MK 1.00* NL 0.90 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.19 KP 0.99 ! LA 0.98 MK 1.00* NL 1.05 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.08 KP 0.84 ! LA 0.75 MK 1.00* NL 1.21 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.134061Jy sigma=0.000707 ! Fit after self-cal, rms=0.123989Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.925 mas, bmaj=37.53 mas, bpa=-10.93 degrees ! Estimated noise=2055.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0061015 Jy ! Component: 100 - total flux cleaned = -0.00537242 Jy ! Component: 150 - total flux cleaned = -0.00422169 Jy ! Component: 200 - total flux cleaned = -0.00360832 Jy ! Total flux subtracted in 200 components = -0.00360832 Jy ! Clean residual min=-0.013124 max=0.009840 Jy/beam ! Clean residual mean=0.000026 rms=0.002972 Jy/beam ! Combined flux in latest and established models = 0.413374 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 0.413374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122929Jy sigma=0.000652 ! Fit after self-cal, rms=0.122962Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122962Jy sigma=0.000651 ! Fit after self-cal, rms=0.123827Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.974 mas, bmaj=37.75 mas, bpa=-10.95 degrees ! Estimated noise=2064.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00379623 Jy ! Component: 100 - total flux cleaned = -0.00323752 Jy ! Component: 150 - total flux cleaned = -0.00264899 Jy ! Component: 200 - total flux cleaned = -0.00204398 Jy ! Total flux subtracted in 200 components = -0.00204398 Jy ! Clean residual min=-0.011294 max=0.009294 Jy/beam ! Clean residual mean=-0.000002 rms=0.002633 Jy/beam ! Combined flux in latest and established models = 0.41133 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 160 components and 0.41133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123482Jy sigma=0.000647 ! Fit after self-cal, rms=0.123519Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736891 Jy ! Component: 100 - total flux cleaned = 0.00129514 Jy ! Component: 150 - total flux cleaned = 0.00186348 Jy ! Component: 200 - total flux cleaned = 0.00230718 Jy ! Total flux subtracted in 200 components = 0.00230718 Jy ! Clean residual min=-0.011379 max=0.009139 Jy/beam ! Clean residual mean=-0.000007 rms=0.002610 Jy/beam ! Combined flux in latest and established models = 0.413637 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 177 components and 0.413637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123420Jy sigma=0.000647 ! Fit after self-cal, rms=0.123429Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123429Jy sigma=0.000647 ! Fit after self-cal, rms=0.124428Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.037 mas, bmaj=37.89 mas, bpa=-10.97 degrees ! Estimated noise=2075.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310736 Jy ! Component: 100 - total flux cleaned = -0.00291684 Jy ! Component: 150 - total flux cleaned = -0.00250386 Jy ! Component: 200 - total flux cleaned = -0.00209797 Jy ! Total flux subtracted in 200 components = -0.00209797 Jy ! Clean residual min=-0.010407 max=0.009121 Jy/beam ! Clean residual mean=0.000006 rms=0.002422 Jy/beam ! Combined flux in latest and established models = 0.411539 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 181 components and 0.411539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124264Jy sigma=0.000646 ! Fit after self-cal, rms=0.124274Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431981 Jy ! Component: 100 - total flux cleaned = 0.000816247 Jy ! Component: 150 - total flux cleaned = 0.0012063 Jy ! Component: 200 - total flux cleaned = 0.00133812 Jy ! Total flux subtracted in 200 components = 0.00133812 Jy ! Clean residual min=-0.010465 max=0.008984 Jy/beam ! Clean residual mean=0.000002 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.412877 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 188 components and 0.412877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124227Jy sigma=0.000645 ! Fit after self-cal, rms=0.124230Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124230Jy sigma=0.000645 ! Fit after self-cal, rms=0.125352Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.086 mas, bmaj=39.06 mas, bpa=-9.864 degrees ! Estimated noise=2149.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00219522 Jy ! Component: 100 - total flux cleaned = -0.00221345 Jy ! Component: 150 - total flux cleaned = -0.00211263 Jy ! Component: 200 - total flux cleaned = -0.00206992 Jy ! Total flux subtracted in 200 components = -0.00206992 Jy ! Clean residual min=-0.008781 max=0.008960 Jy/beam ! Clean residual mean=0.000012 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.410807 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 194 components and 0.410807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125273Jy sigma=0.000645 ! Fit after self-cal, rms=0.125277Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73361e-05 Jy ! Component: 100 - total flux cleaned = 8.72734e-05 Jy ! Component: 150 - total flux cleaned = 0.00015379 Jy ! Component: 200 - total flux cleaned = 0.000216927 Jy ! Total flux subtracted in 200 components = 0.000216927 Jy ! Clean residual min=-0.008751 max=0.008899 Jy/beam ! Clean residual mean=0.000010 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.411024 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 213 components and 0.411024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125253Jy sigma=0.000645 ! Fit after self-cal, rms=0.125251Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.094 mas, bmaj=37.99 mas, bpa=-10.99 degrees ! Estimated noise=2084.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.094 x 37.99 at -10.99 degrees (North through East) ! Clean map min=-0.0096773 max=0.30682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.018 mas, bmaj=31.63 mas, bpa=-11.08 degrees ! Estimated noise=2965.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.239804 Jy ! Component: 100 - total flux cleaned = 0.317093 Jy ! Component: 150 - total flux cleaned = 0.352358 Jy ! Component: 200 - total flux cleaned = 0.370856 Jy ! Total flux subtracted in 200 components = 0.370856 Jy ! Clean residual min=-0.009780 max=0.015422 Jy/beam ! Clean residual mean=-0.000018 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 0.370856 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.370856 Jy ! Inverting map and beam ! Estimated beam: bmin=6.094 mas, bmaj=37.99 mas, bpa=-10.99 degrees ! Estimated noise=2084.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (81.5, -128). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167941 Jy ! Component: 100 - total flux cleaned = 0.0257092 Jy ! Component: 150 - total flux cleaned = 0.0305375 Jy ! Component: 200 - total flux cleaned = 0.0332691 Jy ! Total flux subtracted in 200 components = 0.0332691 Jy ! Clean residual min=-0.008683 max=0.008172 Jy/beam ! Clean residual mean=0.000022 rms=0.002374 Jy/beam ! Combined flux in latest and established models = 0.404125 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 84 components and 0.404125 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.086 mas, bmaj=39.06 mas, bpa=-9.864 degrees ! Estimated noise=2149.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193853 Jy ! Component: 100 - total flux cleaned = 0.00333417 Jy ! Component: 150 - total flux cleaned = 0.00426206 Jy ! Component: 200 - total flux cleaned = 0.00449582 Jy ! Total flux subtracted in 200 components = 0.00449582 Jy ! Clean residual min=-0.007247 max=0.007278 Jy/beam ! Clean residual mean=-0.000019 rms=0.002062 Jy/beam ! Combined flux in latest and established models = 0.408621 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203381 Jy ! Component: 100 - total flux cleaned = 0.000487288 Jy ! Component: 150 - total flux cleaned = 0.000835249 Jy ! Component: 200 - total flux cleaned = 0.00115639 Jy ! Total flux subtracted in 200 components = 0.00115639 Jy ! Clean residual min=-0.006803 max=0.007084 Jy/beam ! Clean residual mean=-0.000015 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 0.409777 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 157 components and 0.409778 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.094 mas, bmaj=37.99 mas, bpa=-10.99 degrees ! Estimated noise=2084.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432277 Jy ! Component: 100 - total flux cleaned = 0.00111626 Jy ! Component: 150 - total flux cleaned = 0.00163883 Jy ! Component: 200 - total flux cleaned = 0.00195303 Jy ! Total flux subtracted in 200 components = 0.00195303 Jy ! Clean residual min=-0.007344 max=0.007269 Jy/beam ! Clean residual mean=-0.000011 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 0.411731 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 174 components and 0.411731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124883Jy sigma=0.000643 ! Fit after self-cal, rms=0.124769Jy sigma=0.000642 wmodel J0045-3705_S_2017_10_09_pus_map.mod ! Writing 174 model components to file: J0045-3705_S_2017_10_09_pus_map.mod wobs J0045-3705_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0045-3705_S_2017_10_09_pus_uvs.fits wwins J0045-3705_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0045-3705_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.30164e-05 Jy ! Component: 100 - total flux cleaned = -0.00082523 Jy ! Component: 150 - total flux cleaned = -0.00119432 Jy ! Component: 200 - total flux cleaned = -0.00144708 Jy ! Component: 250 - total flux cleaned = -0.00167811 Jy ! Component: 300 - total flux cleaned = -0.00181896 Jy ! Component: 350 - total flux cleaned = -0.00201479 Jy ! Component: 400 - total flux cleaned = -0.00207289 Jy ! Component: 450 - total flux cleaned = -0.00207493 Jy ! Component: 500 - total flux cleaned = -0.00218498 Jy ! Component: 550 - total flux cleaned = -0.00223526 Jy ! Component: 600 - total flux cleaned = -0.00252175 Jy ! Component: 650 - total flux cleaned = -0.00256729 Jy ! Component: 700 - total flux cleaned = -0.00261111 Jy ! Component: 750 - total flux cleaned = -0.00227821 Jy ! Component: 800 - total flux cleaned = -0.00207811 Jy ! Component: 850 - total flux cleaned = -0.00173004 Jy ! Component: 900 - total flux cleaned = -0.0014703 Jy ! Component: 950 - total flux cleaned = -0.00118493 Jy ! Component: 1000 - total flux cleaned = -0.000910249 Jy ! Component: 1050 - total flux cleaned = -0.000578632 Jy ! Component: 1100 - total flux cleaned = -0.000353012 Jy ! Component: 1150 - total flux cleaned = -8.12429e-06 Jy ! Component: 1200 - total flux cleaned = 0.000326411 Jy ! Component: 1250 - total flux cleaned = 0.000591747 Jy ! Component: 1300 - total flux cleaned = 0.000793396 Jy ! Component: 1350 - total flux cleaned = 0.0010744 Jy ! Component: 1400 - total flux cleaned = 0.00132076 Jy ! Component: 1450 - total flux cleaned = 0.00145455 Jy ! Component: 1500 - total flux cleaned = 0.00174193 Jy ! Component: 1550 - total flux cleaned = 0.00194668 Jy ! Component: 1600 - total flux cleaned = 0.00212213 Jy ! Component: 1650 - total flux cleaned = 0.00222045 Jy ! Component: 1700 - total flux cleaned = 0.00222008 Jy ! Component: 1750 - total flux cleaned = 0.00224403 Jy ! Component: 1800 - total flux cleaned = 0.00231546 Jy ! Component: 1850 - total flux cleaned = 0.00238619 Jy ! Component: 1900 - total flux cleaned = 0.0024328 Jy ! Component: 1950 - total flux cleaned = 0.00247924 Jy ! Component: 2000 - total flux cleaned = 0.00247935 Jy ! Component: 2050 - total flux cleaned = 0.00250221 Jy ! Component: 2100 - total flux cleaned = 0.00252499 Jy ! Component: 2150 - total flux cleaned = 0.00252515 Jy ! Component: 2200 - total flux cleaned = 0.00252545 Jy ! Component: 2250 - total flux cleaned = 0.00254788 Jy ! Component: 2300 - total flux cleaned = 0.00254787 Jy ! Component: 2350 - total flux cleaned = 0.00254794 Jy ! Component: 2400 - total flux cleaned = 0.0025935 Jy ! Component: 2450 - total flux cleaned = 0.00272978 Jy ! Component: 2500 - total flux cleaned = 0.00284421 Jy ! Component: 2550 - total flux cleaned = 0.00300529 Jy ! Component: 2600 - total flux cleaned = 0.00312117 Jy ! Component: 2650 - total flux cleaned = 0.0033084 Jy ! Component: 2700 - total flux cleaned = 0.00345021 Jy ! Component: 2750 - total flux cleaned = 0.00361718 Jy ! Component: 2800 - total flux cleaned = 0.00378566 Jy ! Component: 2850 - total flux cleaned = 0.0039316 Jy ! Component: 2900 - total flux cleaned = 0.00410351 Jy ! Component: 2950 - total flux cleaned = 0.00425273 Jy ! Component: 3000 - total flux cleaned = 0.00440366 Jy ! Component: 3050 - total flux cleaned = 0.00455638 Jy ! Component: 3100 - total flux cleaned = 0.0046853 Jy ! Component: 3150 - total flux cleaned = 0.00478977 Jy ! Component: 3200 - total flux cleaned = 0.00494883 Jy ! Component: 3250 - total flux cleaned = 0.00505646 Jy ! Component: 3300 - total flux cleaned = 0.00519232 Jy ! Component: 3350 - total flux cleaned = 0.00530248 Jy ! Component: 3400 - total flux cleaned = 0.00544241 Jy ! Component: 3450 - total flux cleaned = 0.00558401 Jy ! Component: 3500 - total flux cleaned = 0.00572779 Jy ! Component: 3550 - total flux cleaned = 0.00587352 Jy ! Component: 3600 - total flux cleaned = 0.00599187 Jy ! Component: 3650 - total flux cleaned = 0.00614179 Jy ! Component: 3700 - total flux cleaned = 0.00629386 Jy ! Component: 3750 - total flux cleaned = 0.00647881 Jy ! Component: 3800 - total flux cleaned = 0.00660414 Jy ! Component: 3850 - total flux cleaned = 0.00676322 Jy ! Component: 3900 - total flux cleaned = 0.00689299 Jy ! Component: 3950 - total flux cleaned = 0.00705771 Jy ! Component: 4000 - total flux cleaned = 0.00719175 Jy ! Component: 4050 - total flux cleaned = 0.00736175 Jy ! Total flux subtracted in 4096 components = 0.0075699 Jy ! Clean residual min=-0.001961 max=0.001843 Jy/beam ! Clean residual mean=0.000026 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.4193 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 532 components and 0.419301 Jy ![Exited script file: muppet] wmap "J0045-3705_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.094 x 37.99 at -10.99 degrees (North through East) ! Clean map min=-0.0075749 max=0.30829 Jy/beam ! Writing clean map to FITS file: J0045-3705_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.308288 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000675932 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.65776 0.65776 1.31552 2.63104 5.26208 10.5242 21.0483 42.0966 84.1932 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.308 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.094 x 37.99 at -10.99 degrees (North through East) ! Clean map min=-0.0075749 max=0.30829 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0045-3705_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:02:04 2019