! Started logfile: J0045-3705_S_2017_03_23_pus_uvs.log on Mon May 13 09:44:53 2019 obs J0045-3705_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0045-3705_S_2017_03_23_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698148 visibilities/baseline/integration-bin. ! Found source: J0045-3705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 12064 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0045-3705_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 276 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.751627Jy sigma=0.004173 ! Fit after self-cal, rms=0.697393Jy sigma=0.003895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.262 mas, bmaj=6.284 mas, bpa=-5.421 degrees ! Estimated noise=2422.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238218 Jy ! Component: 100 - total flux cleaned = 0.290795 Jy ! Total flux subtracted in 100 components = 0.290795 Jy ! Clean residual min=-0.013527 max=0.018861 Jy/beam ! Clean residual mean=-0.000185 rms=0.003429 Jy/beam ! Combined flux in latest and established models = 0.290795 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.290795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142508Jy sigma=0.000724 ! Fit after self-cal, rms=0.142505Jy sigma=0.000724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.502 mas, bpa=-5.957 degrees ! Estimated noise=1361.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232661 Jy ! Component: 100 - total flux cleaned = 0.0327508 Jy ! Component: 150 - total flux cleaned = 0.0374156 Jy ! Component: 200 - total flux cleaned = 0.0397339 Jy ! Total flux subtracted in 200 components = 0.0397339 Jy ! Clean residual min=-0.014052 max=0.011876 Jy/beam ! Clean residual mean=-0.000179 rms=0.003020 Jy/beam ! Combined flux in latest and established models = 0.330529 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.330529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138279Jy sigma=0.000708 ! Fit after self-cal, rms=0.138257Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.00* KP 1.05 ! LA 0.98 MK 0.98 NL 1.00* OV 1.05 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00* KP 1.00 ! LA 0.95 MK 0.98 NL 1.15 OV 1.05 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.05 HN 1.00* KP 0.87 ! LA 0.74 MK 1.00 NL 1.28 OV 0.95 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.08 HN 1.00* KP 1.00* ! LA 0.76 MK 1.07 NL 1.00* OV 1.59 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.138257Jy sigma=0.000708 ! Fit after self-cal, rms=0.129336Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.502 mas, bpa=-5.789 degrees ! Estimated noise=1363.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.33377e-05 Jy ! Component: 100 - total flux cleaned = 9.24106e-05 Jy ! Component: 150 - total flux cleaned = 0.00019982 Jy ! Component: 200 - total flux cleaned = 0.000231738 Jy ! Total flux subtracted in 200 components = 0.000231738 Jy ! Clean residual min=-0.005737 max=0.005325 Jy/beam ! Clean residual mean=0.000031 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.330761 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.330761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129307Jy sigma=0.000660 ! Fit after self-cal, rms=0.129432Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129432Jy sigma=0.000660 ! Fit after self-cal, rms=0.128551Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.506 mas, bpa=-5.718 degrees ! Estimated noise=1362.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303269 Jy ! Component: 100 - total flux cleaned = -0.000252697 Jy ! Component: 150 - total flux cleaned = -0.000188123 Jy ! Component: 200 - total flux cleaned = -0.000150222 Jy ! Total flux subtracted in 200 components = -0.000150222 Jy ! Clean residual min=-0.003052 max=0.003800 Jy/beam ! Clean residual mean=-0.000012 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.330611 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.330611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128539Jy sigma=0.000655 ! Fit after self-cal, rms=0.128550Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, -95). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282635 Jy ! Component: 100 - total flux cleaned = 0.00300918 Jy ! Component: 150 - total flux cleaned = 0.00305743 Jy ! Component: 200 - total flux cleaned = 0.00318808 Jy ! Total flux subtracted in 200 components = 0.00318808 Jy ! Clean residual min=-0.002929 max=0.002978 Jy/beam ! Clean residual mean=0.000002 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.333799 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.333799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128475Jy sigma=0.000654 ! Fit after self-cal, rms=0.128475Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128475Jy sigma=0.000654 ! Fit after self-cal, rms=0.128341Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.509 mas, bpa=-5.695 degrees ! Estimated noise=1361.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06251e-05 Jy ! Component: 100 - total flux cleaned = 0.000121647 Jy ! Component: 150 - total flux cleaned = 0.000148255 Jy ! Component: 200 - total flux cleaned = 0.000197722 Jy ! Total flux subtracted in 200 components = 0.000197722 Jy ! Clean residual min=-0.002855 max=0.002921 Jy/beam ! Clean residual mean=-0.000000 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.333996 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.333996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128329Jy sigma=0.000654 ! Fit after self-cal, rms=0.128332Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3085e-05 Jy ! Component: 100 - total flux cleaned = 4.61333e-05 Jy ! Component: 150 - total flux cleaned = 8.69807e-05 Jy ! Component: 200 - total flux cleaned = 6.7834e-05 Jy ! Total flux subtracted in 200 components = 6.7834e-05 Jy ! Clean residual min=-0.002857 max=0.002923 Jy/beam ! Clean residual mean=0.000000 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.334064 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.334064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128324Jy sigma=0.000654 ! Fit after self-cal, rms=0.128325Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128325Jy sigma=0.000654 ! Fit after self-cal, rms=0.128264Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.281 mas, bmaj=25.22 mas, bpa=-0.101 degrees ! Estimated noise=1806.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117296 Jy ! Component: 100 - total flux cleaned = -0.000112142 Jy ! Component: 150 - total flux cleaned = -0.000128339 Jy ! Component: 200 - total flux cleaned = -0.000205882 Jy ! Total flux subtracted in 200 components = -0.000205882 Jy ! Clean residual min=-0.002562 max=0.003091 Jy/beam ! Clean residual mean=-0.000003 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.333858 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 67 components and 0.333858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128258Jy sigma=0.000654 ! Fit after self-cal, rms=0.128257Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.72632e-05 Jy ! Component: 100 - total flux cleaned = -3.77785e-05 Jy ! Component: 150 - total flux cleaned = -3.43115e-05 Jy ! Component: 200 - total flux cleaned = -3.33981e-05 Jy ! Total flux subtracted in 200 components = -3.33981e-05 Jy ! Clean residual min=-0.002558 max=0.003065 Jy/beam ! Clean residual mean=-0.000003 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.333825 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.333825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128255Jy sigma=0.000654 ! Fit after self-cal, rms=0.128254Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.511 mas, bpa=-5.7 degrees ! Estimated noise=1360.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 7.511 at -5.7 degrees (North through East) ! Clean map min=-0.0027778 max=0.30209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=6.314 mas, bpa=-5.119 degrees ! Estimated noise=2432.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238848 Jy ! Component: 100 - total flux cleaned = 0.291468 Jy ! Component: 150 - total flux cleaned = 0.309165 Jy ! Component: 200 - total flux cleaned = 0.31765 Jy ! Total flux subtracted in 200 components = 0.31765 Jy ! Clean residual min=-0.005309 max=0.005649 Jy/beam ! Clean residual mean=-0.000034 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.31765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.31765 Jy ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.511 mas, bpa=-5.7 degrees ! Estimated noise=1360.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725497 Jy ! Component: 100 - total flux cleaned = 0.0110218 Jy ! Component: 150 - total flux cleaned = 0.0132771 Jy ! Component: 200 - total flux cleaned = 0.0141437 Jy ! Total flux subtracted in 200 components = 0.0141437 Jy ! Clean residual min=-0.003096 max=0.002917 Jy/beam ! Clean residual mean=-0.000008 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.331794 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.331794 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.281 mas, bmaj=25.22 mas, bpa=-0.101 degrees ! Estimated noise=1806.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202056 Jy ! Component: 100 - total flux cleaned = 0.00212135 Jy ! Component: 150 - total flux cleaned = 0.00212353 Jy ! Component: 200 - total flux cleaned = 0.0020847 Jy ! Total flux subtracted in 200 components = 0.0020847 Jy ! Clean residual min=-0.002755 max=0.003286 Jy/beam ! Clean residual mean=-0.000004 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.333879 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57197e-07 Jy ! Component: 100 - total flux cleaned = 2.40432e-06 Jy ! Component: 150 - total flux cleaned = -2.15305e-05 Jy ! Component: 200 - total flux cleaned = -2.17031e-05 Jy ! Total flux subtracted in 200 components = -2.17031e-05 Jy ! Clean residual min=-0.002654 max=0.003222 Jy/beam ! Clean residual mean=-0.000003 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.333857 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.333857 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.511 mas, bpa=-5.7 degrees ! Estimated noise=1360.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024281 Jy ! Component: 100 - total flux cleaned = 0.000165191 Jy ! Component: 150 - total flux cleaned = 0.000164647 Jy ! Component: 200 - total flux cleaned = 0.000109894 Jy ! Total flux subtracted in 200 components = 0.000109894 Jy ! Clean residual min=-0.002845 max=0.002970 Jy/beam ! Clean residual mean=-0.000001 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.333967 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.333967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128260Jy sigma=0.000654 ! Fit after self-cal, rms=0.128251Jy sigma=0.000654 wmodel J0045-3705_S_2017_03_23_pus_map.mod ! Writing 72 model components to file: J0045-3705_S_2017_03_23_pus_map.mod wobs J0045-3705_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0045-3705_S_2017_03_23_pus_uvs.fits wwins J0045-3705_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0045-3705_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166567 Jy ! Component: 100 - total flux cleaned = 0.000119241 Jy ! Component: 150 - total flux cleaned = 0.000116499 Jy ! Component: 200 - total flux cleaned = 3.39045e-05 Jy ! Component: 250 - total flux cleaned = 7.45944e-05 Jy ! Component: 300 - total flux cleaned = -4.0572e-05 Jy ! Component: 350 - total flux cleaned = -0.000189213 Jy ! Component: 400 - total flux cleaned = -0.000225027 Jy ! Component: 450 - total flux cleaned = -0.000295545 Jy ! Component: 500 - total flux cleaned = -0.000364743 Jy ! Component: 550 - total flux cleaned = -0.000398324 Jy ! Component: 600 - total flux cleaned = -0.000430458 Jy ! Component: 650 - total flux cleaned = -0.000429146 Jy ! Component: 700 - total flux cleaned = -0.000334934 Jy ! Component: 750 - total flux cleaned = -0.000458619 Jy ! Component: 800 - total flux cleaned = -0.000458474 Jy ! Component: 850 - total flux cleaned = -0.000487239 Jy ! Component: 900 - total flux cleaned = -0.000457126 Jy ! Component: 950 - total flux cleaned = -0.000342596 Jy ! Component: 1000 - total flux cleaned = -0.000343292 Jy ! Component: 1050 - total flux cleaned = -0.000288567 Jy ! Component: 1100 - total flux cleaned = -0.000342881 Jy ! Component: 1150 - total flux cleaned = -0.000342978 Jy ! Component: 1200 - total flux cleaned = -0.000343125 Jy ! Component: 1250 - total flux cleaned = -0.000394898 Jy ! Component: 1300 - total flux cleaned = -0.000394778 Jy ! Component: 1350 - total flux cleaned = -0.000444512 Jy ! Component: 1400 - total flux cleaned = -0.000469072 Jy ! Component: 1450 - total flux cleaned = -0.000396196 Jy ! Component: 1500 - total flux cleaned = -0.00049205 Jy ! Component: 1550 - total flux cleaned = -0.000515332 Jy ! Component: 1600 - total flux cleaned = -0.00049155 Jy ! Component: 1650 - total flux cleaned = -0.000469137 Jy ! Component: 1700 - total flux cleaned = -0.000469563 Jy ! Component: 1750 - total flux cleaned = -0.000558939 Jy ! Component: 1800 - total flux cleaned = -0.000603084 Jy ! Component: 1850 - total flux cleaned = -0.00062505 Jy ! Component: 1900 - total flux cleaned = -0.000668042 Jy ! Component: 1950 - total flux cleaned = -0.000647082 Jy ! Component: 2000 - total flux cleaned = -0.000710653 Jy ! Component: 2050 - total flux cleaned = -0.000710815 Jy ! Component: 2100 - total flux cleaned = -0.000649438 Jy ! Component: 2150 - total flux cleaned = -0.000751216 Jy ! Component: 2200 - total flux cleaned = -0.00069064 Jy ! Component: 2250 - total flux cleaned = -0.000690529 Jy ! Component: 2300 - total flux cleaned = -0.000631413 Jy ! Component: 2350 - total flux cleaned = -0.000651077 Jy ! Component: 2400 - total flux cleaned = -0.000516217 Jy ! Component: 2450 - total flux cleaned = -0.000516298 Jy ! Component: 2500 - total flux cleaned = -0.000516064 Jy ! Component: 2550 - total flux cleaned = -0.000478488 Jy ! Component: 2600 - total flux cleaned = -0.000441499 Jy ! Component: 2650 - total flux cleaned = -0.000478128 Jy ! Component: 2700 - total flux cleaned = -0.000423069 Jy ! Component: 2750 - total flux cleaned = -0.000441162 Jy ! Component: 2800 - total flux cleaned = -0.000459103 Jy ! Component: 2850 - total flux cleaned = -0.000405555 Jy ! Component: 2900 - total flux cleaned = -0.000494159 Jy ! Component: 2950 - total flux cleaned = -0.000423695 Jy ! Component: 3000 - total flux cleaned = -0.000458691 Jy ! Component: 3050 - total flux cleaned = -0.000440941 Jy ! Component: 3100 - total flux cleaned = -0.000406464 Jy ! Component: 3150 - total flux cleaned = -0.000457698 Jy ! Component: 3200 - total flux cleaned = -0.000474709 Jy ! Component: 3250 - total flux cleaned = -0.000474465 Jy ! Component: 3300 - total flux cleaned = -0.000524699 Jy ! Component: 3350 - total flux cleaned = -0.000491393 Jy ! Component: 3400 - total flux cleaned = -0.000508018 Jy ! Component: 3450 - total flux cleaned = -0.000540955 Jy ! Component: 3500 - total flux cleaned = -0.00050829 Jy ! Component: 3550 - total flux cleaned = -0.000573337 Jy ! Component: 3600 - total flux cleaned = -0.000589578 Jy ! Component: 3650 - total flux cleaned = -0.000605765 Jy ! Component: 3700 - total flux cleaned = -0.000637906 Jy ! Component: 3750 - total flux cleaned = -0.000653872 Jy ! Component: 3800 - total flux cleaned = -0.00066982 Jy ! Component: 3850 - total flux cleaned = -0.000685642 Jy ! Component: 3900 - total flux cleaned = -0.000701515 Jy ! Component: 3950 - total flux cleaned = -0.000748567 Jy ! Component: 4000 - total flux cleaned = -0.000732942 Jy ! Component: 4050 - total flux cleaned = -0.000779563 Jy ! Total flux subtracted in 4096 components = -0.000779515 Jy ! Clean residual min=-0.001003 max=0.000948 Jy/beam ! Clean residual mean=0.000004 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.333187 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 355 components and 0.333187 Jy ![Exited script file: muppet] wmap "J0045-3705_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 7.511 at -5.7 degrees (North through East) ! Clean map min=-0.0021697 max=0.30324 Jy/beam ! Writing clean map to FITS file: J0045-3705_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.303242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259948 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257169 0.257169 0.514338 1.02868 2.05735 4.1147 8.22941 16.4588 32.9176 65.8353 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.303 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 7.511 at -5.7 degrees (North through East) ! Clean map min=-0.0021697 max=0.30324 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0045-3705_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:44:59 2019