! Started logfile: J0042+1009_S_2017_05_27_pus_uvs.log on Fri May 3 10:53:19 2019 obs J0042+1009_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0042+1009_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.92846 visibilities/baseline/integration-bin. ! Found source: J0042+1009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0042+1009_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 615 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.791067Jy sigma=0.024454 ! Fit after self-cal, rms=0.783103Jy sigma=0.024432 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=6.794 mas, bpa=-5.069 degrees ! Estimated noise=764.702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133673 Jy ! Component: 100 - total flux cleaned = 0.173034 Jy ! Total flux subtracted in 100 components = 0.173034 Jy ! Clean residual min=-0.019734 max=0.028528 Jy/beam ! Clean residual mean=0.000056 rms=0.006773 Jy/beam ! Combined flux in latest and established models = 0.173034 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.173034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160182Jy sigma=0.003801 ! Fit after self-cal, rms=0.160143Jy sigma=0.003800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=7.343 mas, bpa=-1.571 degrees ! Estimated noise=557.445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289572 Jy ! Component: 100 - total flux cleaned = 0.0467516 Jy ! Component: 150 - total flux cleaned = 0.0584424 Jy ! Component: 200 - total flux cleaned = 0.0662837 Jy ! Total flux subtracted in 200 components = 0.0662837 Jy ! Clean residual min=-0.018885 max=0.024416 Jy/beam ! Clean residual mean=0.000115 rms=0.006100 Jy/beam ! Combined flux in latest and established models = 0.239318 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.239318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154383Jy sigma=0.003753 ! Fit after self-cal, rms=0.154305Jy sigma=0.003752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.83 HN 0.93 KP 0.95 ! LA 0.94 MK 1.04 NL 0.88 OV 0.96 ! PT 1.03 SC 0.79 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 31.67 FD 0.86 HN 1.01 KP 0.94 ! LA 0.94 MK 1.08 NL 1.04 OV 0.99 ! PT 0.98 SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.89 HN 0.96 KP 0.95 ! LA 0.98 MK 1.08 NL 1.00 OV 0.90 ! PT 0.98 SC 0.85 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.03 KP 1.00* ! LA 0.92 MK 1.21 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.154305Jy sigma=0.003752 ! Fit after self-cal, rms=2.204777Jy sigma=0.000820 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.746 mas, bpa=-1.278 degrees ! Estimated noise=612.994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016353 Jy ! Component: 100 - total flux cleaned = 0.00060557 Jy ! Component: 150 - total flux cleaned = -0.000226539 Jy ! Component: 200 - total flux cleaned = -0.000893462 Jy ! Total flux subtracted in 200 components = -0.000893462 Jy ! Clean residual min=-0.008012 max=0.007416 Jy/beam ! Clean residual mean=0.000002 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.238424 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.238424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.199104Jy sigma=0.000812 ! Fit after self-cal, rms=2.199234Jy sigma=0.000802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.199234Jy sigma=0.000802 ! Fit after self-cal, rms=3.407560Jy sigma=0.000788 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.804 mas, bpa=-2.483 degrees ! Estimated noise=632.567 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489451 Jy ! Component: 100 - total flux cleaned = 0.00414527 Jy ! Component: 150 - total flux cleaned = 0.0035275 Jy ! Component: 200 - total flux cleaned = 0.00245995 Jy ! Total flux subtracted in 200 components = 0.00245995 Jy ! Clean residual min=-0.008715 max=0.007559 Jy/beam ! Clean residual mean=-0.000003 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.240884 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.240884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.403070Jy sigma=0.000790 ! Fit after self-cal, rms=3.403074Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117265 Jy ! Component: 100 - total flux cleaned = -0.00179316 Jy ! Component: 150 - total flux cleaned = -0.00253227 Jy ! Component: 200 - total flux cleaned = -0.00319779 Jy ! Total flux subtracted in 200 components = -0.00319779 Jy ! Clean residual min=-0.007862 max=0.007198 Jy/beam ! Clean residual mean=-0.000002 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.237686 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.237686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.401372Jy sigma=0.000793 ! Fit after self-cal, rms=3.401371Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.401371Jy sigma=0.000793 ! Fit after self-cal, rms=2.424980Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.761 mas, bpa=-3.102 degrees ! Estimated noise=637.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331354 Jy ! Component: 100 - total flux cleaned = 0.0033145 Jy ! Component: 150 - total flux cleaned = 0.00324589 Jy ! Component: 200 - total flux cleaned = 0.00305473 Jy ! Total flux subtracted in 200 components = 0.00305473 Jy ! Clean residual min=-0.003612 max=0.004416 Jy/beam ! Clean residual mean=-0.000004 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.240741 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.240741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.424417Jy sigma=0.000702 ! Fit after self-cal, rms=2.424410Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142438 Jy ! Component: 100 - total flux cleaned = 0.000766655 Jy ! Component: 150 - total flux cleaned = 0.000242136 Jy ! Component: 200 - total flux cleaned = -0.000104733 Jy ! Total flux subtracted in 200 components = -0.000104733 Jy ! Clean residual min=-0.003102 max=0.002649 Jy/beam ! Clean residual mean=-0.000003 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.240636 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.240636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.423711Jy sigma=0.000701 ! Fit after self-cal, rms=2.423708Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.423708Jy sigma=0.000700 ! Fit after self-cal, rms=2.560215Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.502 mas, bmaj=11.75 mas, bpa=-4.951 degrees ! Estimated noise=808.626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309673 Jy ! Component: 100 - total flux cleaned = 0.00285425 Jy ! Component: 150 - total flux cleaned = 0.0025292 Jy ! Component: 200 - total flux cleaned = 0.00224752 Jy ! Total flux subtracted in 200 components = 0.00224752 Jy ! Clean residual min=-0.003179 max=0.003647 Jy/beam ! Clean residual mean=-0.000009 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.242884 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.242884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.559414Jy sigma=0.000700 ! Fit after self-cal, rms=2.559415Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26291e-06 Jy ! Component: 100 - total flux cleaned = -0.000216009 Jy ! Component: 150 - total flux cleaned = -0.00041216 Jy ! Component: 200 - total flux cleaned = -0.000646246 Jy ! Total flux subtracted in 200 components = -0.000646246 Jy ! Clean residual min=-0.003014 max=0.003643 Jy/beam ! Clean residual mean=-0.000008 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.242237 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.242237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.558991Jy sigma=0.000701 ! Fit after self-cal, rms=2.558993Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.777 mas, bpa=-3.34 degrees ! Estimated noise=644.772 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 7.777 at -3.34 degrees (North through East) ! Clean map min=-0.0057939 max=0.20862 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=6.972 mas, bpa=-5.271 degrees ! Estimated noise=871.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153065 Jy ! Component: 100 - total flux cleaned = 0.201283 Jy ! Component: 150 - total flux cleaned = 0.223946 Jy ! Component: 200 - total flux cleaned = 0.235753 Jy ! Total flux subtracted in 200 components = 0.235753 Jy ! Clean residual min=-0.004722 max=0.005918 Jy/beam ! Clean residual mean=-0.000009 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.235753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.235753 Jy ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.777 mas, bpa=-3.34 degrees ! Estimated noise=644.772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725069 Jy ! Component: 100 - total flux cleaned = 0.00798191 Jy ! Component: 150 - total flux cleaned = 0.00798855 Jy ! Component: 200 - total flux cleaned = 0.00800194 Jy ! Total flux subtracted in 200 components = 0.00800194 Jy ! Clean residual min=-0.004116 max=0.003185 Jy/beam ! Clean residual mean=-0.000005 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.243755 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.243755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.502 mas, bmaj=11.75 mas, bpa=-4.951 degrees ! Estimated noise=808.626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000792393 Jy ! Component: 100 - total flux cleaned = 0.000229247 Jy ! Component: 150 - total flux cleaned = -0.000134757 Jy ! Component: 200 - total flux cleaned = -0.000459248 Jy ! Total flux subtracted in 200 components = -0.000459248 Jy ! Clean residual min=-0.003183 max=0.003736 Jy/beam ! Clean residual mean=-0.000009 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.243296 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379156 Jy ! Component: 100 - total flux cleaned = -0.000629519 Jy ! Component: 150 - total flux cleaned = -0.00092433 Jy ! Component: 200 - total flux cleaned = -0.00112028 Jy ! Total flux subtracted in 200 components = -0.00112028 Jy ! Clean residual min=-0.002988 max=0.003776 Jy/beam ! Clean residual mean=-0.000008 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.242175 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 60 components and 0.242175 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.777 mas, bpa=-3.34 degrees ! Estimated noise=644.772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066605 Jy ! Component: 100 - total flux cleaned = -0.000741247 Jy ! Component: 150 - total flux cleaned = -0.000800561 Jy ! Component: 200 - total flux cleaned = -0.000746615 Jy ! Total flux subtracted in 200 components = -0.000746615 Jy ! Clean residual min=-0.002943 max=0.002646 Jy/beam ! Clean residual mean=-0.000003 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.241429 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.241429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.558503Jy sigma=0.000702 ! Fit after self-cal, rms=2.558499Jy sigma=0.000702 wmodel J0042+1009_S_2017_05_27_pus_map.mod ! Writing 75 model components to file: J0042+1009_S_2017_05_27_pus_map.mod wobs J0042+1009_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0042+1009_S_2017_05_27_pus_uvs.fits wwins J0042+1009_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0042+1009_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000920294 Jy ! Component: 100 - total flux cleaned = -0.00125984 Jy ! Component: 150 - total flux cleaned = -0.00153771 Jy ! Component: 200 - total flux cleaned = -0.00184925 Jy ! Component: 250 - total flux cleaned = -0.00219434 Jy ! Component: 300 - total flux cleaned = -0.00227845 Jy ! Component: 350 - total flux cleaned = -0.00240194 Jy ! Component: 400 - total flux cleaned = -0.00244162 Jy ! Component: 450 - total flux cleaned = -0.00260079 Jy ! Component: 500 - total flux cleaned = -0.00263977 Jy ! Component: 550 - total flux cleaned = -0.00267815 Jy ! Component: 600 - total flux cleaned = -0.0027546 Jy ! Component: 650 - total flux cleaned = -0.00282975 Jy ! Component: 700 - total flux cleaned = -0.00286715 Jy ! Component: 750 - total flux cleaned = -0.00290356 Jy ! Component: 800 - total flux cleaned = -0.00290324 Jy ! Component: 850 - total flux cleaned = -0.00290284 Jy ! Component: 900 - total flux cleaned = -0.00293796 Jy ! Component: 950 - total flux cleaned = -0.00297267 Jy ! Component: 1000 - total flux cleaned = -0.00307538 Jy ! Component: 1050 - total flux cleaned = -0.00314294 Jy ! Component: 1100 - total flux cleaned = -0.00324293 Jy ! Component: 1150 - total flux cleaned = -0.0033419 Jy ! Component: 1200 - total flux cleaned = -0.00340747 Jy ! Component: 1250 - total flux cleaned = -0.00356929 Jy ! Component: 1300 - total flux cleaned = -0.00360162 Jy ! Component: 1350 - total flux cleaned = -0.00372847 Jy ! Component: 1400 - total flux cleaned = -0.00382259 Jy ! Component: 1450 - total flux cleaned = -0.00391583 Jy ! Component: 1500 - total flux cleaned = -0.00407024 Jy ! Component: 1550 - total flux cleaned = -0.00416182 Jy ! Component: 1600 - total flux cleaned = -0.00425219 Jy ! Component: 1650 - total flux cleaned = -0.00434188 Jy ! Component: 1700 - total flux cleaned = -0.0043712 Jy ! Component: 1750 - total flux cleaned = -0.00451852 Jy ! Component: 1800 - total flux cleaned = -0.00463505 Jy ! Component: 1850 - total flux cleaned = -0.0047794 Jy ! Component: 1900 - total flux cleaned = -0.00486477 Jy ! Component: 1950 - total flux cleaned = -0.00497837 Jy ! Component: 2000 - total flux cleaned = -0.0051184 Jy ! Component: 2050 - total flux cleaned = -0.00506239 Jy ! Component: 2100 - total flux cleaned = -0.00520073 Jy ! Component: 2150 - total flux cleaned = -0.00520027 Jy ! Component: 2200 - total flux cleaned = -0.00525474 Jy ! Component: 2250 - total flux cleaned = -0.00528177 Jy ! Component: 2300 - total flux cleaned = -0.00536177 Jy ! Component: 2350 - total flux cleaned = -0.00544151 Jy ! Component: 2400 - total flux cleaned = -0.00552054 Jy ! Component: 2450 - total flux cleaned = -0.00549449 Jy ! Component: 2500 - total flux cleaned = -0.00557264 Jy ! Component: 2550 - total flux cleaned = -0.0055726 Jy ! Component: 2600 - total flux cleaned = -0.00570088 Jy ! Component: 2650 - total flux cleaned = -0.00577696 Jy ! Component: 2700 - total flux cleaned = -0.00580216 Jy ! Component: 2750 - total flux cleaned = -0.00582666 Jy ! Component: 2800 - total flux cleaned = -0.00582663 Jy ! Component: 2850 - total flux cleaned = -0.00582659 Jy ! Component: 2900 - total flux cleaned = -0.00585117 Jy ! Component: 2950 - total flux cleaned = -0.00587561 Jy ! Component: 3000 - total flux cleaned = -0.00590008 Jy ! Component: 3050 - total flux cleaned = -0.00602037 Jy ! Component: 3100 - total flux cleaned = -0.00611591 Jy ! Component: 3150 - total flux cleaned = -0.00611613 Jy ! Component: 3200 - total flux cleaned = -0.00621043 Jy ! Component: 3250 - total flux cleaned = -0.00632748 Jy ! Component: 3300 - total flux cleaned = -0.00635071 Jy ! Component: 3350 - total flux cleaned = -0.00642005 Jy ! Component: 3400 - total flux cleaned = -0.00635114 Jy ! Component: 3450 - total flux cleaned = -0.00644247 Jy ! Component: 3500 - total flux cleaned = -0.00646513 Jy ! Component: 3550 - total flux cleaned = -0.00657796 Jy ! Component: 3600 - total flux cleaned = -0.00653311 Jy ! Component: 3650 - total flux cleaned = -0.00660009 Jy ! Component: 3700 - total flux cleaned = -0.00662219 Jy ! Component: 3750 - total flux cleaned = -0.00668835 Jy ! Component: 3800 - total flux cleaned = -0.00671037 Jy ! Component: 3850 - total flux cleaned = -0.00681952 Jy ! Component: 3900 - total flux cleaned = -0.00681947 Jy ! Component: 3950 - total flux cleaned = -0.00684092 Jy ! Component: 4000 - total flux cleaned = -0.00690519 Jy ! Component: 4050 - total flux cleaned = -0.00696913 Jy ! Total flux subtracted in 4096 components = -0.00707521 Jy ! Clean residual min=-0.001352 max=0.001210 Jy/beam ! Clean residual mean=-0.000004 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.234354 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 363 components and 0.234354 Jy ![Exited script file: muppet] wmap "J0042+1009_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 7.777 at -3.34 degrees (North through East) ! Clean map min=-0.0059138 max=0.20931 Jy/beam ! Writing clean map to FITS file: J0042+1009_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.20931 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000401556 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.575544 0.575544 1.15109 2.30218 4.60435 9.2087 18.4174 36.8348 73.6696 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.209 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 7.777 at -3.34 degrees (North through East) ! Clean map min=-0.0059138 max=0.20931 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0042+1009_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:53:23 2019