! Started logfile: J0041-0143_S_2017_10_09_pus_uvs.log on Sun May 12 13:01:54 2019 obs J0041-0143_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0041-0143_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.48659 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0041-0143 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8128 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0041-0143_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 387 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 879 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986164Jy sigma=0.008146 ! Fit after self-cal, rms=0.940957Jy sigma=0.007792 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.945 mas, bmaj=12.63 mas, bpa=-13.83 degrees ! Estimated noise=1447.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480926 Jy ! Component: 100 - total flux cleaned = 0.0586033 Jy ! Total flux subtracted in 100 components = 0.0586033 Jy ! Clean residual min=-0.003843 max=0.003605 Jy/beam ! Clean residual mean=0.000019 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.0586033 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0586033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081429Jy sigma=0.000634 ! Fit after self-cal, rms=0.080998Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.362 mas, bmaj=16.1 mas, bpa=-15.48 degrees ! Estimated noise=1162.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352521 Jy ! Component: 100 - total flux cleaned = 0.00506164 Jy ! Component: 150 - total flux cleaned = 0.00609546 Jy ! Component: 200 - total flux cleaned = 0.00682558 Jy ! Total flux subtracted in 200 components = 0.00682558 Jy ! Clean residual min=-0.003054 max=0.003060 Jy/beam ! Clean residual mean=0.000016 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.0654289 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0654289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080813Jy sigma=0.000629 ! Fit after self-cal, rms=0.080781Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.96 KP 1.04 ! LA 1.04 MK 1.00* NL 0.90 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 1.08 KP 1.22 ! LA 0.97 MK 1.00* NL 1.01 OV 1.00* ! PT 1.11 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.99 KP 0.83 ! LA 0.79 MK 1.00* NL 1.11 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.080781Jy sigma=0.000629 ! Fit after self-cal, rms=0.079435Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.468 mas, bmaj=15.95 mas, bpa=-15.2 degrees ! Estimated noise=1179.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000655037 Jy ! Component: 100 - total flux cleaned = 0.000924143 Jy ! Component: 150 - total flux cleaned = 0.00104304 Jy ! Component: 200 - total flux cleaned = 0.00105758 Jy ! Total flux subtracted in 200 components = 0.00105758 Jy ! Clean residual min=-0.002672 max=0.003046 Jy/beam ! Clean residual mean=0.000006 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0664865 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0664865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079425Jy sigma=0.000630 ! Fit after self-cal, rms=0.079394Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079394Jy sigma=0.000629 ! Fit after self-cal, rms=0.080221Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.472 mas, bmaj=15.93 mas, bpa=-15.11 degrees ! Estimated noise=1177.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582935 Jy ! Component: 100 - total flux cleaned = 0.000764117 Jy ! Component: 150 - total flux cleaned = 0.000837875 Jy ! Component: 200 - total flux cleaned = 0.00082486 Jy ! Total flux subtracted in 200 components = 0.00082486 Jy ! Clean residual min=-0.002324 max=0.002658 Jy/beam ! Clean residual mean=0.000008 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0673114 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.0673114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080214Jy sigma=0.000628 ! Fit after self-cal, rms=0.080278Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35317e-05 Jy ! Component: 100 - total flux cleaned = 0.000196572 Jy ! Component: 150 - total flux cleaned = 0.000218867 Jy ! Component: 200 - total flux cleaned = 0.000208249 Jy ! Total flux subtracted in 200 components = 0.000208249 Jy ! Clean residual min=-0.002346 max=0.002698 Jy/beam ! Clean residual mean=0.000009 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0675196 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0675196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080273Jy sigma=0.000628 ! Fit after self-cal, rms=0.080271Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080271Jy sigma=0.000628 ! Fit after self-cal, rms=0.080542Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.466 mas, bmaj=15.89 mas, bpa=-15.05 degrees ! Estimated noise=1175.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028371 Jy ! Component: 100 - total flux cleaned = 0.000391966 Jy ! Component: 150 - total flux cleaned = 0.000403069 Jy ! Component: 200 - total flux cleaned = 0.000403147 Jy ! Total flux subtracted in 200 components = 0.000403147 Jy ! Clean residual min=-0.002332 max=0.002595 Jy/beam ! Clean residual mean=0.000008 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0679228 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0679228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080538Jy sigma=0.000628 ! Fit after self-cal, rms=0.080562Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.40811e-05 Jy ! Component: 100 - total flux cleaned = 8.75448e-05 Jy ! Component: 150 - total flux cleaned = 7.74992e-05 Jy ! Component: 200 - total flux cleaned = 6.81144e-05 Jy ! Total flux subtracted in 200 components = 6.81144e-05 Jy ! Clean residual min=-0.002304 max=0.002611 Jy/beam ! Clean residual mean=0.000009 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0679909 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.0679909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080559Jy sigma=0.000628 ! Fit after self-cal, rms=0.080558Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080558Jy sigma=0.000628 ! Fit after self-cal, rms=0.080578Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.559 mas, bmaj=16.24 mas, bpa=-18.11 degrees ! Estimated noise=1290.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014285 Jy ! Component: 100 - total flux cleaned = 0.000142192 Jy ! Component: 150 - total flux cleaned = 0.000165727 Jy ! Component: 200 - total flux cleaned = 0.000180424 Jy ! Total flux subtracted in 200 components = 0.000180424 Jy ! Clean residual min=-0.002472 max=0.002774 Jy/beam ! Clean residual mean=0.000014 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0681713 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0681713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080576Jy sigma=0.000628 ! Fit after self-cal, rms=0.080578Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.39114e-05 Jy ! Component: 100 - total flux cleaned = -2.50746e-05 Jy ! Component: 150 - total flux cleaned = -1.83831e-05 Jy ! Component: 200 - total flux cleaned = -5.40618e-06 Jy ! Total flux subtracted in 200 components = -5.40618e-06 Jy ! Clean residual min=-0.002476 max=0.002826 Jy/beam ! Clean residual mean=0.000014 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0681659 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0681659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080575Jy sigma=0.000628 ! Fit after self-cal, rms=0.080575Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.463 mas, bmaj=15.87 mas, bpa=-15.01 degrees ! Estimated noise=1174.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.463 x 15.87 at -15.01 degrees (North through East) ! Clean map min=-0.0023146 max=0.06136 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.105 mas, bmaj=12.41 mas, bpa=-12.77 degrees ! Estimated noise=1470.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476522 Jy ! Component: 100 - total flux cleaned = 0.0582496 Jy ! Component: 150 - total flux cleaned = 0.0618287 Jy ! Component: 200 - total flux cleaned = 0.0638736 Jy ! Total flux subtracted in 200 components = 0.0638736 Jy ! Clean residual min=-0.003140 max=0.002848 Jy/beam ! Clean residual mean=0.000006 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0638736 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0638736 Jy ! Inverting map and beam ! Estimated beam: bmin=5.463 mas, bmaj=15.87 mas, bpa=-15.01 degrees ! Estimated noise=1174.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198459 Jy ! Component: 100 - total flux cleaned = 0.00294329 Jy ! Component: 150 - total flux cleaned = 0.00334508 Jy ! Component: 200 - total flux cleaned = 0.00363846 Jy ! Total flux subtracted in 200 components = 0.00363846 Jy ! Clean residual min=-0.002443 max=0.002727 Jy/beam ! Clean residual mean=0.000010 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0675121 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.0675121 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.559 mas, bmaj=16.24 mas, bpa=-18.11 degrees ! Estimated noise=1290.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331499 Jy ! Component: 100 - total flux cleaned = 0.000423288 Jy ! Component: 150 - total flux cleaned = 0.000435345 Jy ! Component: 200 - total flux cleaned = 0.000434154 Jy ! Total flux subtracted in 200 components = 0.000434154 Jy ! Clean residual min=-0.002499 max=0.002831 Jy/beam ! Clean residual mean=0.000014 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0679462 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06451e-05 Jy ! Component: 100 - total flux cleaned = 2.0548e-05 Jy ! Component: 150 - total flux cleaned = 2.99358e-05 Jy ! Component: 200 - total flux cleaned = 3.862e-05 Jy ! Total flux subtracted in 200 components = 3.862e-05 Jy ! Clean residual min=-0.002481 max=0.002800 Jy/beam ! Clean residual mean=0.000014 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0679849 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 0.0679849 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.463 mas, bmaj=15.87 mas, bpa=-15.01 degrees ! Estimated noise=1174.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100013 Jy ! Component: 100 - total flux cleaned = 0.00012629 Jy ! Component: 150 - total flux cleaned = 0.000161739 Jy ! Component: 200 - total flux cleaned = 0.000172372 Jy ! Total flux subtracted in 200 components = 0.000172372 Jy ! Clean residual min=-0.002344 max=0.002680 Jy/beam ! Clean residual mean=0.000009 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0681572 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.0681573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080579Jy sigma=0.000628 ! Fit after self-cal, rms=0.080578Jy sigma=0.000628 wmodel J0041-0143_S_2017_10_09_pus_map.mod ! Writing 56 model components to file: J0041-0143_S_2017_10_09_pus_map.mod wobs J0041-0143_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0041-0143_S_2017_10_09_pus_uvs.fits wwins J0041-0143_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0041-0143_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624252 Jy ! Component: 100 - total flux cleaned = 0.000626996 Jy ! Component: 150 - total flux cleaned = 0.000699736 Jy ! Component: 200 - total flux cleaned = 0.000768674 Jy ! Component: 250 - total flux cleaned = 0.000770483 Jy ! Component: 300 - total flux cleaned = 0.0008634 Jy ! Component: 350 - total flux cleaned = 0.000891866 Jy ! Component: 400 - total flux cleaned = 0.000808794 Jy ! Component: 450 - total flux cleaned = 0.00067795 Jy ! Component: 500 - total flux cleaned = 0.000628402 Jy ! Component: 550 - total flux cleaned = 0.000580349 Jy ! Component: 600 - total flux cleaned = 0.000556963 Jy ! Component: 650 - total flux cleaned = 0.00049014 Jy ! Component: 700 - total flux cleaned = 0.00051212 Jy ! Component: 750 - total flux cleaned = 0.000491119 Jy ! Component: 800 - total flux cleaned = 0.000490319 Jy ! Component: 850 - total flux cleaned = 0.000431681 Jy ! Component: 900 - total flux cleaned = 0.000450911 Jy ! Component: 950 - total flux cleaned = 0.000469199 Jy ! Component: 1000 - total flux cleaned = 0.000486965 Jy ! Component: 1050 - total flux cleaned = 0.000503988 Jy ! Component: 1100 - total flux cleaned = 0.000486785 Jy ! Component: 1150 - total flux cleaned = 0.000453738 Jy ! Component: 1200 - total flux cleaned = 0.000453606 Jy ! Component: 1250 - total flux cleaned = 0.000437593 Jy ! Component: 1300 - total flux cleaned = 0.000453109 Jy ! Component: 1350 - total flux cleaned = 0.000483573 Jy ! Component: 1400 - total flux cleaned = 0.000528539 Jy ! Component: 1450 - total flux cleaned = 0.000573149 Jy ! Component: 1500 - total flux cleaned = 0.000617011 Jy ! Component: 1550 - total flux cleaned = 0.000617022 Jy ! Component: 1600 - total flux cleaned = 0.00063129 Jy ! Component: 1650 - total flux cleaned = 0.000631422 Jy ! Component: 1700 - total flux cleaned = 0.000589895 Jy ! Component: 1750 - total flux cleaned = 0.000590063 Jy ! Component: 1800 - total flux cleaned = 0.000562887 Jy ! Component: 1850 - total flux cleaned = 0.000522759 Jy ! Component: 1900 - total flux cleaned = 0.000496272 Jy ! Component: 1950 - total flux cleaned = 0.000456713 Jy ! Component: 2000 - total flux cleaned = 0.000391549 Jy ! Component: 2050 - total flux cleaned = 0.000339863 Jy ! Component: 2100 - total flux cleaned = 0.000275738 Jy ! Component: 2150 - total flux cleaned = 0.000250226 Jy ! Component: 2200 - total flux cleaned = 0.000186991 Jy ! Component: 2250 - total flux cleaned = 0.000149353 Jy ! Component: 2300 - total flux cleaned = 9.95037e-05 Jy ! Component: 2350 - total flux cleaned = 7.46545e-05 Jy ! Component: 2400 - total flux cleaned = 2.54203e-05 Jy ! Component: 2450 - total flux cleaned = 1.31915e-05 Jy ! Component: 2500 - total flux cleaned = 1.03367e-06 Jy ! Component: 2550 - total flux cleaned = -2.31528e-05 Jy ! Component: 2600 - total flux cleaned = -7.12643e-05 Jy ! Component: 2650 - total flux cleaned = -4.73634e-05 Jy ! Component: 2700 - total flux cleaned = -2.36098e-05 Jy ! Component: 2750 - total flux cleaned = -3.55128e-05 Jy ! Component: 2800 - total flux cleaned = -3.55322e-05 Jy ! Component: 2850 - total flux cleaned = -4.72372e-05 Jy ! Component: 2900 - total flux cleaned = -2.37679e-05 Jy ! Component: 2950 - total flux cleaned = 1.11905e-05 Jy ! Component: 3000 - total flux cleaned = 1.12189e-05 Jy ! Component: 3050 - total flux cleaned = 2.28795e-05 Jy ! Component: 3100 - total flux cleaned = 1.12833e-05 Jy ! Component: 3150 - total flux cleaned = 2.27751e-05 Jy ! Component: 3200 - total flux cleaned = 1.12672e-05 Jy ! Component: 3250 - total flux cleaned = 4.58037e-05 Jy ! Component: 3300 - total flux cleaned = 5.72429e-05 Jy ! Component: 3350 - total flux cleaned = 5.73141e-05 Jy ! Component: 3400 - total flux cleaned = 6.87485e-05 Jy ! Component: 3450 - total flux cleaned = 1.14377e-05 Jy ! Component: 3500 - total flux cleaned = -3.4335e-05 Jy ! Component: 3550 - total flux cleaned = -4.58286e-05 Jy ! Component: 3600 - total flux cleaned = -0.000103046 Jy ! Component: 3650 - total flux cleaned = -0.000125925 Jy ! Component: 3700 - total flux cleaned = -0.000148818 Jy ! Component: 3750 - total flux cleaned = -0.000194659 Jy ! Component: 3800 - total flux cleaned = -0.000171793 Jy ! Component: 3850 - total flux cleaned = -0.000240611 Jy ! Component: 3900 - total flux cleaned = -0.00027499 Jy ! Component: 3950 - total flux cleaned = -0.000263436 Jy ! Component: 4000 - total flux cleaned = -0.000286399 Jy ! Component: 4050 - total flux cleaned = -0.000343949 Jy ! Total flux subtracted in 4096 components = -0.000401531 Jy ! Clean residual min=-0.000623 max=0.000601 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0677557 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 344 components and 0.0677557 Jy ![Exited script file: muppet] wmap "J0041-0143_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.463 x 15.87 at -15.01 degrees (North through East) ! Clean map min=-0.0020779 max=0.061247 Jy/beam ! Writing clean map to FITS file: J0041-0143_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0612472 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222009 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08744 1.08744 2.17488 4.34976 8.69952 17.399 34.7981 69.5961 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.463 x 15.87 at -15.01 degrees (North through East) ! Clean map min=-0.0020779 max=0.061247 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0041-0143_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:01:59 2019