! Started logfile: J0041-0143_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:29:43 2019 obs J0041-0143_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0041-0143_S_2017_05_31_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.921053 visibilities/baseline/integration-bin. ! Found source: J0041-0143 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 18900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0041-0143_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 470 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970208Jy sigma=0.008133 ! Fit after self-cal, rms=0.945199Jy sigma=0.007990 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=7.489 mas, bpa=-6.049 degrees ! Estimated noise=1100.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046192 Jy ! Component: 100 - total flux cleaned = 0.0563658 Jy ! Total flux subtracted in 100 components = 0.0563658 Jy ! Clean residual min=-0.004127 max=0.004161 Jy/beam ! Clean residual mean=0.000005 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0563658 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0563658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141188Jy sigma=0.000665 ! Fit after self-cal, rms=0.141071Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.412 mas, bpa=-6.063 degrees ! Estimated noise=713.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255944 Jy ! Component: 100 - total flux cleaned = 0.00383151 Jy ! Component: 150 - total flux cleaned = 0.00430269 Jy ! Component: 200 - total flux cleaned = 0.00439009 Jy ! Total flux subtracted in 200 components = 0.00439009 Jy ! Clean residual min=-0.002468 max=0.002446 Jy/beam ! Clean residual mean=0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0607559 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.0607559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140904Jy sigma=0.000663 ! Fit after self-cal, rms=0.140899Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.95 KP 1.11 ! LA 1.02 MK 1.14 NL 0.96 OV 1.00 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.02 KP 1.02 ! LA 0.94 MK 1.08 NL 1.06 OV 1.14 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.24 FD 1.11 HN 0.93 KP 0.99 ! LA 0.98 MK 0.98 NL 1.04 OV 0.98 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.90 KP 0.71 ! LA 0.87 MK 0.94 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.140899Jy sigma=0.000663 ! Fit after self-cal, rms=0.102509Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.437 mas, bpa=-6.345 degrees ! Estimated noise=718.516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587892 Jy ! Component: 100 - total flux cleaned = 0.000634774 Jy ! Component: 150 - total flux cleaned = 0.000615667 Jy ! Component: 200 - total flux cleaned = 0.000581955 Jy ! Total flux subtracted in 200 components = 0.000581955 Jy ! Clean residual min=-0.002059 max=0.002330 Jy/beam ! Clean residual mean=0.000002 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0613378 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0613378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102475Jy sigma=0.000660 ! Fit after self-cal, rms=0.102376Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102376Jy sigma=0.000659 ! Fit after self-cal, rms=0.084623Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.428 mas, bpa=-6.434 degrees ! Estimated noise=716.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234766 Jy ! Component: 100 - total flux cleaned = 0.000259394 Jy ! Component: 150 - total flux cleaned = 0.000271318 Jy ! Component: 200 - total flux cleaned = 0.000281891 Jy ! Total flux subtracted in 200 components = 0.000281891 Jy ! Clean residual min=-0.002050 max=0.002165 Jy/beam ! Clean residual mean=0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0616197 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0616197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084618Jy sigma=0.000658 ! Fit after self-cal, rms=0.084521Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45.5, -72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151659 Jy ! Component: 100 - total flux cleaned = 0.00160268 Jy ! Component: 150 - total flux cleaned = 0.00147792 Jy ! Component: 200 - total flux cleaned = 0.00137316 Jy ! Total flux subtracted in 200 components = 0.00137316 Jy ! Clean residual min=-0.001912 max=0.001889 Jy/beam ! Clean residual mean=0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0629929 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0629929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084469Jy sigma=0.000658 ! Fit after self-cal, rms=0.084448Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084448Jy sigma=0.000658 ! Fit after self-cal, rms=0.084176Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=8.447 mas, bpa=-6.628 degrees ! Estimated noise=715.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759072 Jy ! Component: 100 - total flux cleaned = 0.000731656 Jy ! Component: 150 - total flux cleaned = 0.000755057 Jy ! Component: 200 - total flux cleaned = 0.000775989 Jy ! Total flux subtracted in 200 components = 0.000775989 Jy ! Clean residual min=-0.001871 max=0.001938 Jy/beam ! Clean residual mean=0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0637688 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.0637688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084154Jy sigma=0.000657 ! Fit after self-cal, rms=0.084140Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298135 Jy ! Component: 100 - total flux cleaned = 0.000276129 Jy ! Component: 150 - total flux cleaned = 0.000276986 Jy ! Component: 200 - total flux cleaned = 0.000259472 Jy ! Total flux subtracted in 200 components = 0.000259472 Jy ! Clean residual min=-0.001875 max=0.001915 Jy/beam ! Clean residual mean=0.000003 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0640283 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.0640283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084129Jy sigma=0.000657 ! Fit after self-cal, rms=0.084121Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084121Jy sigma=0.000657 ! Fit after self-cal, rms=0.084289Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.353 mas, bmaj=14.25 mas, bpa=-8.91 degrees ! Estimated noise=920.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305881 Jy ! Component: 100 - total flux cleaned = 0.000263824 Jy ! Component: 150 - total flux cleaned = 0.00022996 Jy ! Component: 200 - total flux cleaned = 0.000198278 Jy ! Total flux subtracted in 200 components = 0.000198278 Jy ! Clean residual min=-0.002049 max=0.002102 Jy/beam ! Clean residual mean=0.000007 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0642266 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.0642266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084285Jy sigma=0.000657 ! Fit after self-cal, rms=0.084288Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.76058e-05 Jy ! Component: 100 - total flux cleaned = 2.27312e-05 Jy ! Component: 150 - total flux cleaned = -1.83358e-05 Jy ! Component: 200 - total flux cleaned = -1.82517e-05 Jy ! Total flux subtracted in 200 components = -1.82517e-05 Jy ! Clean residual min=-0.002054 max=0.002083 Jy/beam ! Clean residual mean=0.000007 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0642083 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0642083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084286Jy sigma=0.000657 ! Fit after self-cal, rms=0.084285Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.459 mas, bpa=-6.727 degrees ! Estimated noise=715.538 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 8.459 at -6.727 degrees (North through East) ! Clean map min=-0.0018211 max=0.058409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=7.485 mas, bpa=-6.62 degrees ! Estimated noise=1057.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450582 Jy ! Component: 100 - total flux cleaned = 0.0551891 Jy ! Component: 150 - total flux cleaned = 0.0592173 Jy ! Component: 200 - total flux cleaned = 0.0610669 Jy ! Total flux subtracted in 200 components = 0.0610669 Jy ! Clean residual min=-0.003198 max=0.002996 Jy/beam ! Clean residual mean=0.000002 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0610669 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0610669 Jy ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.459 mas, bpa=-6.727 degrees ! Estimated noise=715.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251395 Jy ! Component: 100 - total flux cleaned = 0.00350297 Jy ! Component: 150 - total flux cleaned = 0.00405977 Jy ! Component: 200 - total flux cleaned = 0.00427015 Jy ! Total flux subtracted in 200 components = 0.00427015 Jy ! Clean residual min=-0.001897 max=0.001830 Jy/beam ! Clean residual mean=0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.065337 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.065337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.353 mas, bmaj=14.25 mas, bpa=-8.91 degrees ! Estimated noise=920.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457457 Jy ! Component: 100 - total flux cleaned = 0.00060625 Jy ! Component: 150 - total flux cleaned = 0.000627564 Jy ! Component: 200 - total flux cleaned = 0.000664238 Jy ! Total flux subtracted in 200 components = 0.000664238 Jy ! Clean residual min=-0.001934 max=0.002027 Jy/beam ! Clean residual mean=0.000006 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0660013 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78884e-05 Jy ! Component: 100 - total flux cleaned = 3.43361e-05 Jy ! Component: 150 - total flux cleaned = 1.90033e-05 Jy ! Component: 200 - total flux cleaned = 1.9225e-05 Jy ! Total flux subtracted in 200 components = 1.9225e-05 Jy ! Clean residual min=-0.001939 max=0.002001 Jy/beam ! Clean residual mean=0.000006 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0660205 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 70 components and 0.0660205 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.459 mas, bpa=-6.727 degrees ! Estimated noise=715.538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000288638 Jy ! Component: 100 - total flux cleaned = -0.000374448 Jy ! Component: 150 - total flux cleaned = -0.000373364 Jy ! Component: 200 - total flux cleaned = -0.000398141 Jy ! Total flux subtracted in 200 components = -0.000398141 Jy ! Clean residual min=-0.001867 max=0.001865 Jy/beam ! Clean residual mean=0.000003 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0656223 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.0656223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084273Jy sigma=0.000657 ! Fit after self-cal, rms=0.084276Jy sigma=0.000657 wmodel J0041-0143_S_2017_05_31_pus_map.mod ! Writing 84 model components to file: J0041-0143_S_2017_05_31_pus_map.mod wobs J0041-0143_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0041-0143_S_2017_05_31_pus_uvs.fits wwins J0041-0143_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J0041-0143_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168164 Jy ! Component: 100 - total flux cleaned = -0.000523147 Jy ! Component: 150 - total flux cleaned = -0.000797186 Jy ! Component: 200 - total flux cleaned = -0.00108968 Jy ! Component: 250 - total flux cleaned = -0.00122971 Jy ! Component: 300 - total flux cleaned = -0.00122949 Jy ! Component: 350 - total flux cleaned = -0.00112377 Jy ! Component: 400 - total flux cleaned = -0.00107227 Jy ! Component: 450 - total flux cleaned = -0.000972302 Jy ! Component: 500 - total flux cleaned = -0.000948148 Jy ! Component: 550 - total flux cleaned = -0.000924421 Jy ! Component: 600 - total flux cleaned = -0.000924308 Jy ! Component: 650 - total flux cleaned = -0.000947051 Jy ! Component: 700 - total flux cleaned = -0.00090241 Jy ! Component: 750 - total flux cleaned = -0.000924751 Jy ! Component: 800 - total flux cleaned = -0.000903432 Jy ! Component: 850 - total flux cleaned = -0.000945306 Jy ! Component: 900 - total flux cleaned = -0.000903927 Jy ! Component: 950 - total flux cleaned = -0.0010053 Jy ! Component: 1000 - total flux cleaned = -0.0010047 Jy ! Component: 1050 - total flux cleaned = -0.00104378 Jy ! Component: 1100 - total flux cleaned = -0.00106264 Jy ! Component: 1150 - total flux cleaned = -0.00113872 Jy ! Component: 1200 - total flux cleaned = -0.00117636 Jy ! Component: 1250 - total flux cleaned = -0.00130598 Jy ! Component: 1300 - total flux cleaned = -0.00130599 Jy ! Component: 1350 - total flux cleaned = -0.00139588 Jy ! Component: 1400 - total flux cleaned = -0.00150251 Jy ! Component: 1450 - total flux cleaned = -0.00158996 Jy ! Component: 1500 - total flux cleaned = -0.00160718 Jy ! Component: 1550 - total flux cleaned = -0.0016585 Jy ! Component: 1600 - total flux cleaned = -0.00172584 Jy ! Component: 1650 - total flux cleaned = -0.00185903 Jy ! Component: 1700 - total flux cleaned = -0.00187551 Jy ! Component: 1750 - total flux cleaned = -0.00194039 Jy ! Component: 1800 - total flux cleaned = -0.00192431 Jy ! Component: 1850 - total flux cleaned = -0.00197205 Jy ! Component: 1900 - total flux cleaned = -0.00197202 Jy ! Component: 1950 - total flux cleaned = -0.00204966 Jy ! Component: 2000 - total flux cleaned = -0.00208034 Jy ! Component: 2050 - total flux cleaned = -0.00214085 Jy ! Component: 2100 - total flux cleaned = -0.00212555 Jy ! Component: 2150 - total flux cleaned = -0.00212545 Jy ! Component: 2200 - total flux cleaned = -0.00219959 Jy ! Component: 2250 - total flux cleaned = -0.00221436 Jy ! Component: 2300 - total flux cleaned = -0.00221462 Jy ! Component: 2350 - total flux cleaned = -0.00222908 Jy ! Component: 2400 - total flux cleaned = -0.00225767 Jy ! Component: 2450 - total flux cleaned = -0.00222933 Jy ! Component: 2500 - total flux cleaned = -0.00222948 Jy ! Component: 2550 - total flux cleaned = -0.0022434 Jy ! Component: 2600 - total flux cleaned = -0.00229839 Jy ! Component: 2650 - total flux cleaned = -0.0023119 Jy ! Component: 2700 - total flux cleaned = -0.00232548 Jy ! Component: 2750 - total flux cleaned = -0.00233899 Jy ! Component: 2800 - total flux cleaned = -0.00237901 Jy ! Component: 2850 - total flux cleaned = -0.00243178 Jy ! Component: 2900 - total flux cleaned = -0.00243171 Jy ! Component: 2950 - total flux cleaned = -0.00248342 Jy ! Component: 3000 - total flux cleaned = -0.00244492 Jy ! Component: 3050 - total flux cleaned = -0.00248302 Jy ! Component: 3100 - total flux cleaned = -0.00248289 Jy ! Component: 3150 - total flux cleaned = -0.0024578 Jy ! Component: 3200 - total flux cleaned = -0.00250759 Jy ! Component: 3250 - total flux cleaned = -0.00244583 Jy ! Component: 3300 - total flux cleaned = -0.00243354 Jy ! Component: 3350 - total flux cleaned = -0.00244568 Jy ! Component: 3400 - total flux cleaned = -0.00243378 Jy ! Component: 3450 - total flux cleaned = -0.00243373 Jy ! Component: 3500 - total flux cleaned = -0.00243378 Jy ! Component: 3550 - total flux cleaned = -0.00248095 Jy ! Component: 3600 - total flux cleaned = -0.00246929 Jy ! Component: 3650 - total flux cleaned = -0.00251572 Jy ! Component: 3700 - total flux cleaned = -0.00250435 Jy ! Component: 3750 - total flux cleaned = -0.00253865 Jy ! Component: 3800 - total flux cleaned = -0.00253855 Jy ! Component: 3850 - total flux cleaned = -0.00259488 Jy ! Component: 3900 - total flux cleaned = -0.00262845 Jy ! Component: 3950 - total flux cleaned = -0.0026285 Jy ! Component: 4000 - total flux cleaned = -0.00263949 Jy ! Component: 4050 - total flux cleaned = -0.00271632 Jy ! Total flux subtracted in 4096 components = -0.0027163 Jy ! Clean residual min=-0.000617 max=0.000636 Jy/beam ! Clean residual mean=0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.062906 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 351 components and 0.062906 Jy ![Exited script file: muppet] wmap "J0041-0143_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 8.459 at -6.727 degrees (North through East) ! Clean map min=-0.0013735 max=0.058061 Jy/beam ! Writing clean map to FITS file: J0041-0143_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0580609 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192976 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.997106 0.997106 1.99421 3.98842 7.97685 15.9537 31.9074 63.8148 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 8.459 at -6.727 degrees (North through East) ! Clean map min=-0.0013735 max=0.058061 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0041-0143_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:29:53 2019