! Started logfile: J0041+3211_S_2017_05_27_pus_uvs.log on Fri May 3 10:53:13 2019 obs J0041+3211_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0041+3211_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966667 visibilities/baseline/integration-bin. ! Found source: J0041+3211 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0041+3211_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 593 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.871999Jy sigma=0.008185 ! Fit after self-cal, rms=0.865081Jy sigma=0.008129 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=5.651 mas, bpa=-1.981 degrees ! Estimated noise=926.076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101386 Jy ! Component: 100 - total flux cleaned = 0.127984 Jy ! Total flux subtracted in 100 components = 0.127984 Jy ! Clean residual min=-0.006950 max=0.015726 Jy/beam ! Clean residual mean=0.000007 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.127984 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.127984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094050Jy sigma=0.000758 ! Fit after self-cal, rms=0.094039Jy sigma=0.000758 ! Inverting map ! Added new window around map position (-5, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155855 Jy ! Component: 100 - total flux cleaned = 0.0252036 Jy ! Total flux subtracted in 100 components = 0.0252036 Jy ! Clean residual min=-0.005750 max=0.010113 Jy/beam ! Clean residual mean=0.000007 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.153188 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.153188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090397Jy sigma=0.000722 ! Fit after self-cal, rms=0.090249Jy sigma=0.000721 ! Inverting map ! Added new window around map position (-15, -18.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104528 Jy ! Component: 100 - total flux cleaned = 0.0171115 Jy ! Total flux subtracted in 100 components = 0.0171115 Jy ! Clean residual min=-0.004595 max=0.005607 Jy/beam ! Clean residual mean=0.000004 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.170299 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.170299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088524Jy sigma=0.000703 ! Fit after self-cal, rms=0.088375Jy sigma=0.000702 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=6.586 mas, bpa=-1.974 degrees ! Estimated noise=613.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, -17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897583 Jy ! Component: 100 - total flux cleaned = 0.0149946 Jy ! Component: 150 - total flux cleaned = 0.0194117 Jy ! Component: 200 - total flux cleaned = 0.0227817 Jy ! Total flux subtracted in 200 components = 0.0227817 Jy ! Clean residual min=-0.003273 max=0.003360 Jy/beam ! Clean residual mean=0.000005 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.193081 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 71 components and 0.193081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087083Jy sigma=0.000690 ! Fit after self-cal, rms=0.086961Jy sigma=0.000689 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 0.98 KP 1.02 ! LA 1.03 MK 1.03 NL 0.90 OV 1.00 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.05 KP 0.95 ! LA 0.97 MK 0.99 NL 1.07 OV 1.03 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.99 HN 1.02 KP 0.99 ! LA 1.00 MK 1.04 NL 1.05 OV 0.96 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.03 KP 1.00* ! LA 1.03 MK 1.19 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.086961Jy sigma=0.000689 ! Fit after self-cal, rms=0.083894Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=6.59 mas, bpa=-1.447 degrees ! Estimated noise=610.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353769 Jy ! Component: 100 - total flux cleaned = 0.00587351 Jy ! Component: 150 - total flux cleaned = 0.00720588 Jy ! Component: 200 - total flux cleaned = 0.00799015 Jy ! Total flux subtracted in 200 components = 0.00799015 Jy ! Clean residual min=-0.002450 max=0.003279 Jy/beam ! Clean residual mean=0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.201071 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 105 components and 0.201071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083706Jy sigma=0.000682 ! Fit after self-cal, rms=0.083664Jy sigma=0.000682 ! Inverting map ! Added new window around map position (-56.5, -83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304184 Jy ! Component: 100 - total flux cleaned = 0.00487623 Jy ! Component: 150 - total flux cleaned = 0.00633332 Jy ! Component: 200 - total flux cleaned = 0.0071226 Jy ! Total flux subtracted in 200 components = 0.0071226 Jy ! Clean residual min=-0.002253 max=0.002301 Jy/beam ! Clean residual mean=0.000003 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.208194 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 137 components and 0.208194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083518Jy sigma=0.000680 ! Fit after self-cal, rms=0.083505Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083505Jy sigma=0.000680 ! Fit after self-cal, rms=0.079234Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=6.571 mas, bpa=-1.636 degrees ! Estimated noise=610.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167796 Jy ! Component: 100 - total flux cleaned = 0.00294794 Jy ! Component: 150 - total flux cleaned = 0.00397085 Jy ! Component: 200 - total flux cleaned = 0.0048201 Jy ! Total flux subtracted in 200 components = 0.0048201 Jy ! Clean residual min=-0.001838 max=0.001894 Jy/beam ! Clean residual mean=0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.213014 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.213014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079184Jy sigma=0.000672 ! Fit after self-cal, rms=0.079160Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (103.5, 53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013743 Jy ! Component: 100 - total flux cleaned = 0.00189362 Jy ! Component: 150 - total flux cleaned = 0.00234537 Jy ! Component: 200 - total flux cleaned = 0.00281627 Jy ! Total flux subtracted in 200 components = 0.00281627 Jy ! Clean residual min=-0.001739 max=0.001744 Jy/beam ! Clean residual mean=0.000000 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.21583 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 175 components and 0.21583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079113Jy sigma=0.000671 ! Fit after self-cal, rms=0.079111Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079111Jy sigma=0.000671 ! Fit after self-cal, rms=0.079099Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.518 mas, bmaj=6.561 mas, bpa=-1.638 degrees ! Estimated noise=610.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880974 Jy ! Component: 100 - total flux cleaned = 0.0012851 Jy ! Component: 150 - total flux cleaned = 0.00165331 Jy ! Component: 200 - total flux cleaned = 0.00189097 Jy ! Total flux subtracted in 200 components = 0.00189097 Jy ! Clean residual min=-0.001673 max=0.001711 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.217721 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 198 components and 0.217721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079078Jy sigma=0.000671 ! Fit after self-cal, rms=0.079076Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154587 Jy ! Component: 100 - total flux cleaned = 0.00194705 Jy ! Component: 150 - total flux cleaned = 0.00227842 Jy ! Component: 200 - total flux cleaned = 0.00242806 Jy ! Total flux subtracted in 200 components = 0.00242806 Jy ! Clean residual min=-0.001546 max=0.001624 Jy/beam ! Clean residual mean=-0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.220149 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 216 components and 0.220149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079041Jy sigma=0.000670 ! Fit after self-cal, rms=0.079036Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079036Jy sigma=0.000670 ! Fit after self-cal, rms=0.078967Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.456 mas, bmaj=10.01 mas, bpa=-3.384 degrees ! Estimated noise=749.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001305 Jy ! Component: 100 - total flux cleaned = 0.00197489 Jy ! Component: 150 - total flux cleaned = 0.00236536 Jy ! Component: 200 - total flux cleaned = 0.00273315 Jy ! Total flux subtracted in 200 components = 0.00273315 Jy ! Clean residual min=-0.001437 max=0.001666 Jy/beam ! Clean residual mean=0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.222882 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 249 components and 0.222882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078958Jy sigma=0.000670 ! Fit after self-cal, rms=0.078954Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578939 Jy ! Component: 100 - total flux cleaned = 0.000867477 Jy ! Component: 150 - total flux cleaned = 0.00101146 Jy ! Component: 200 - total flux cleaned = 0.00109927 Jy ! Total flux subtracted in 200 components = 0.00109927 Jy ! Clean residual min=-0.001442 max=0.001649 Jy/beam ! Clean residual mean=-0.000000 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.223982 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 262 components and 0.223982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078950Jy sigma=0.000670 ! Fit after self-cal, rms=0.078950Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=6.549 mas, bpa=-1.67 degrees ! Estimated noise=611.546 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.513 x 6.549 at -1.67 degrees (North through East) ! Clean map min=-0.001434 max=0.13207 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=5.606 mas, bpa=-1.815 degrees ! Estimated noise=928.612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101227 Jy ! Component: 100 - total flux cleaned = 0.128815 Jy ! Component: 150 - total flux cleaned = 0.145382 Jy ! Component: 200 - total flux cleaned = 0.157516 Jy ! Total flux subtracted in 200 components = 0.157516 Jy ! Clean residual min=-0.004027 max=0.007026 Jy/beam ! Clean residual mean=0.000003 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.157516 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.157516 Jy ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=6.549 mas, bpa=-1.67 degrees ! Estimated noise=611.546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133731 Jy ! Component: 100 - total flux cleaned = 0.0227761 Jy ! Component: 150 - total flux cleaned = 0.0297504 Jy ! Component: 200 - total flux cleaned = 0.0351365 Jy ! Total flux subtracted in 200 components = 0.0351365 Jy ! Clean residual min=-0.002546 max=0.003200 Jy/beam ! Clean residual mean=0.000004 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.192652 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 82 components and 0.192652 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430088 Jy ! Component: 100 - total flux cleaned = 0.00780221 Jy ! Component: 150 - total flux cleaned = 0.0107244 Jy ! Component: 200 - total flux cleaned = 0.0132264 Jy ! Total flux subtracted in 200 components = 0.0132264 Jy ! Clean residual min=-0.001965 max=0.001858 Jy/beam ! Clean residual mean=0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.205879 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 124 components and 0.205879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.456 mas, bmaj=10.01 mas, bpa=-3.384 degrees ! Estimated noise=749.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360685 Jy ! Component: 100 - total flux cleaned = 0.00619889 Jy ! Component: 150 - total flux cleaned = 0.00818015 Jy ! Component: 200 - total flux cleaned = 0.00977965 Jy ! Total flux subtracted in 200 components = 0.00977965 Jy ! Clean residual min=-0.001639 max=0.001650 Jy/beam ! Clean residual mean=0.000002 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.215659 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134668 Jy ! Component: 100 - total flux cleaned = 0.00249217 Jy ! Component: 150 - total flux cleaned = 0.00348174 Jy ! Component: 200 - total flux cleaned = 0.00421341 Jy ! Total flux subtracted in 200 components = 0.00421341 Jy ! Clean residual min=-0.001518 max=0.001596 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.219872 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 229 components and 0.219872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=6.549 mas, bpa=-1.67 degrees ! Estimated noise=611.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360045 Jy ! Component: 100 - total flux cleaned = 0.000825637 Jy ! Component: 150 - total flux cleaned = 0.00114099 Jy ! Component: 200 - total flux cleaned = 0.00139963 Jy ! Total flux subtracted in 200 components = 0.00139963 Jy ! Clean residual min=-0.001506 max=0.001580 Jy/beam ! Clean residual mean=-0.000000 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.221272 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 251 components and 0.221272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079001Jy sigma=0.000670 ! Fit after self-cal, rms=0.078989Jy sigma=0.000670 wmodel J0041+3211_S_2017_05_27_pus_map.mod ! Writing 251 model components to file: J0041+3211_S_2017_05_27_pus_map.mod wobs J0041+3211_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0041+3211_S_2017_05_27_pus_uvs.fits wwins J0041+3211_S_2017_05_27_pus_map.win ! wwins: Wrote 7 windows to J0041+3211_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257055 Jy ! Component: 100 - total flux cleaned = -0.000310668 Jy ! Component: 150 - total flux cleaned = -0.000462717 Jy ! Component: 200 - total flux cleaned = -0.000706338 Jy ! Component: 250 - total flux cleaned = -0.000895657 Jy ! Component: 300 - total flux cleaned = -0.00101095 Jy ! Component: 350 - total flux cleaned = -0.00116906 Jy ! Component: 400 - total flux cleaned = -0.00134606 Jy ! Component: 450 - total flux cleaned = -0.00154072 Jy ! Component: 500 - total flux cleaned = -0.00168916 Jy ! Component: 550 - total flux cleaned = -0.0018352 Jy ! Component: 600 - total flux cleaned = -0.00193809 Jy ! Component: 650 - total flux cleaned = -0.0020592 Jy ! Component: 700 - total flux cleaned = -0.00213886 Jy ! Component: 750 - total flux cleaned = -0.00221752 Jy ! Component: 800 - total flux cleaned = -0.00231401 Jy ! Component: 850 - total flux cleaned = -0.00238997 Jy ! Component: 900 - total flux cleaned = -0.00250226 Jy ! Component: 950 - total flux cleaned = -0.00253917 Jy ! Component: 1000 - total flux cleaned = -0.00261198 Jy ! Component: 1050 - total flux cleaned = -0.0026839 Jy ! Component: 1100 - total flux cleaned = -0.00273733 Jy ! Component: 1150 - total flux cleaned = -0.00273705 Jy ! Component: 1200 - total flux cleaned = -0.00277233 Jy ! Component: 1250 - total flux cleaned = -0.00285828 Jy ! Component: 1300 - total flux cleaned = -0.00285814 Jy ! Component: 1350 - total flux cleaned = -0.00294227 Jy ! Component: 1400 - total flux cleaned = -0.00297544 Jy ! Component: 1450 - total flux cleaned = -0.00304114 Jy ! Component: 1500 - total flux cleaned = -0.00307386 Jy ! Component: 1550 - total flux cleaned = -0.00310596 Jy ! Component: 1600 - total flux cleaned = -0.00315353 Jy ! Component: 1650 - total flux cleaned = -0.00321646 Jy ! Component: 1700 - total flux cleaned = -0.0032788 Jy ! Component: 1750 - total flux cleaned = -0.00332535 Jy ! Component: 1800 - total flux cleaned = -0.0034476 Jy ! Component: 1850 - total flux cleaned = -0.00352325 Jy ! Component: 1900 - total flux cleaned = -0.00358333 Jy ! Component: 1950 - total flux cleaned = -0.00364286 Jy ! Component: 2000 - total flux cleaned = -0.00367236 Jy ! Component: 2050 - total flux cleaned = -0.00381857 Jy ! Component: 2100 - total flux cleaned = -0.00386192 Jy ! Component: 2150 - total flux cleaned = -0.00394813 Jy ! Component: 2200 - total flux cleaned = -0.00400519 Jy ! Component: 2250 - total flux cleaned = -0.00411809 Jy ! Component: 2300 - total flux cleaned = -0.00421615 Jy ! Component: 2350 - total flux cleaned = -0.00425769 Jy ! Component: 2400 - total flux cleaned = -0.00438168 Jy ! Component: 2450 - total flux cleaned = -0.00440893 Jy ! Component: 2500 - total flux cleaned = -0.00454462 Jy ! Component: 2550 - total flux cleaned = -0.00451746 Jy ! Component: 2600 - total flux cleaned = -0.00459768 Jy ! Component: 2650 - total flux cleaned = -0.00463751 Jy ! Component: 2700 - total flux cleaned = -0.0046903 Jy ! Component: 2750 - total flux cleaned = -0.0047688 Jy ! Component: 2800 - total flux cleaned = -0.00482074 Jy ! Component: 2850 - total flux cleaned = -0.00488515 Jy ! Component: 2900 - total flux cleaned = -0.00493639 Jy ! Component: 2950 - total flux cleaned = -0.0049492 Jy ! Component: 3000 - total flux cleaned = -0.00496179 Jy ! Component: 3050 - total flux cleaned = -0.00506216 Jy ! Component: 3100 - total flux cleaned = -0.00503721 Jy ! Component: 3150 - total flux cleaned = -0.00512403 Jy ! Component: 3200 - total flux cleaned = -0.00518553 Jy ! Component: 3250 - total flux cleaned = -0.00523446 Jy ! Component: 3300 - total flux cleaned = -0.00528295 Jy ! Component: 3350 - total flux cleaned = -0.00533123 Jy ! Component: 3400 - total flux cleaned = -0.00535514 Jy ! Component: 3450 - total flux cleaned = -0.00541456 Jy ! Component: 3500 - total flux cleaned = -0.00549738 Jy ! Component: 3550 - total flux cleaned = -0.00557967 Jy ! Component: 3600 - total flux cleaned = -0.0056614 Jy ! Component: 3650 - total flux cleaned = -0.00560325 Jy ! Component: 3700 - total flux cleaned = -0.00564946 Jy ! Component: 3750 - total flux cleaned = -0.00568387 Jy ! Component: 3800 - total flux cleaned = -0.00571807 Jy ! Component: 3850 - total flux cleaned = -0.00574095 Jy ! Component: 3900 - total flux cleaned = -0.00580864 Jy ! Component: 3950 - total flux cleaned = -0.0058198 Jy ! Component: 4000 - total flux cleaned = -0.00583101 Jy ! Component: 4050 - total flux cleaned = -0.0058643 Jy ! Total flux subtracted in 4096 components = -0.00591942 Jy ! Clean residual min=-0.000593 max=0.000599 Jy/beam ! Clean residual mean=-0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.215352 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 521 components and 0.215352 Jy ![Exited script file: muppet] wmap "J0041+3211_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.513 x 6.549 at -1.67 degrees (North through East) ! Clean map min=-0.0014701 max=0.13201 Jy/beam ! Writing clean map to FITS file: J0041+3211_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200954 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.456693 0.456693 0.913387 1.82677 3.65355 7.30709 14.6142 29.2284 58.4568 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.513 x 6.549 at -1.67 degrees (North through East) ! Clean map min=-0.0014701 max=0.13201 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0041+3211_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:53:18 2019