! Started logfile: J0041+1339_S_2017_05_27_pus_uvs.log on Fri May 3 10:53:09 2019 obs J0041+1339_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0041+1339_S_2017_05_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905998 visibilities/baseline/integration-bin. ! Found source: J0041+1339 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 18428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0041+1339_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 622 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.847112Jy sigma=0.044434 ! Fit after self-cal, rms=0.844105Jy sigma=0.044414 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=6.306 mas, bpa=5.216 degrees ! Estimated noise=409.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0543047 Jy ! Component: 100 - total flux cleaned = 0.0797563 Jy ! Total flux subtracted in 100 components = 0.0797563 Jy ! Clean residual min=-0.019801 max=0.027898 Jy/beam ! Clean residual mean=0.000005 rms=0.006788 Jy/beam ! Combined flux in latest and established models = 0.0797563 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0797563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141116Jy sigma=0.002259 ! Fit after self-cal, rms=0.140919Jy sigma=0.002257 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=6.923 mas, bpa=1.15 degrees ! Estimated noise=387.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315891 Jy ! Component: 100 - total flux cleaned = 0.0492418 Jy ! Component: 150 - total flux cleaned = 0.0602021 Jy ! Component: 200 - total flux cleaned = 0.0644139 Jy ! Total flux subtracted in 200 components = 0.0644139 Jy ! Clean residual min=-0.021191 max=0.023963 Jy/beam ! Clean residual mean=0.000007 rms=0.006579 Jy/beam ! Combined flux in latest and established models = 0.14417 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.14417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121269Jy sigma=0.002936 ! Fit after self-cal, rms=0.120939Jy sigma=0.002936 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.51 FD 0.71 HN 0.82 KP 0.87 ! LA 0.88 MK 0.99 NL 0.78 OV 0.89 ! PT 0.93 SC 0.64 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.60 FD 0.76 HN 0.86 KP 0.86 ! LA 0.85 MK 0.99 NL 0.96 OV 0.91 ! PT 0.92 SC 0.59 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 21.72 FD 0.79 HN 0.91 KP 0.88 ! LA 0.90 MK 1.04 NL 0.97 OV 0.86 ! PT 0.93 SC 0.58 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.92 KP 1.00* ! LA 0.93 MK 0.89 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.120939Jy sigma=0.002936 ! Fit after self-cal, rms=0.648835Jy sigma=0.000820 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.592 mas, bpa=1.621 degrees ! Estimated noise=482.727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315931 Jy ! Component: 100 - total flux cleaned = -0.00605024 Jy ! Component: 150 - total flux cleaned = -0.00715315 Jy ! Component: 200 - total flux cleaned = -0.00744632 Jy ! Total flux subtracted in 200 components = -0.00744632 Jy ! Clean residual min=-0.005924 max=0.004925 Jy/beam ! Clean residual mean=0.000013 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.136724 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.136724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.644990Jy sigma=0.000762 ! Fit after self-cal, rms=0.644944Jy sigma=0.000741 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.644944Jy sigma=0.000741 ! Fit after self-cal, rms=0.381131Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=7.598 mas, bpa=0.7931 degrees ! Estimated noise=475.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245846 Jy ! Component: 100 - total flux cleaned = -0.00279285 Jy ! Component: 150 - total flux cleaned = -0.0029272 Jy ! Component: 200 - total flux cleaned = -0.00304266 Jy ! Total flux subtracted in 200 components = -0.00304266 Jy ! Clean residual min=-0.002884 max=0.002986 Jy/beam ! Clean residual mean=0.000005 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.133681 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.133681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380428Jy sigma=0.000693 ! Fit after self-cal, rms=0.380414Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160523 Jy ! Component: 100 - total flux cleaned = 0.0019797 Jy ! Component: 150 - total flux cleaned = 0.00214463 Jy ! Component: 200 - total flux cleaned = 0.00236766 Jy ! Total flux subtracted in 200 components = 0.00236766 Jy ! Clean residual min=-0.002767 max=0.002150 Jy/beam ! Clean residual mean=0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.136049 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.136049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380073Jy sigma=0.000690 ! Fit after self-cal, rms=0.380069Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380069Jy sigma=0.000690 ! Fit after self-cal, rms=0.060998Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.571 mas, bpa=0.2985 degrees ! Estimated noise=477.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137316 Jy ! Component: 100 - total flux cleaned = -0.00144777 Jy ! Component: 150 - total flux cleaned = -0.00138382 Jy ! Component: 200 - total flux cleaned = -0.00115248 Jy ! Total flux subtracted in 200 components = -0.00115248 Jy ! Clean residual min=-0.002010 max=0.001646 Jy/beam ! Clean residual mean=0.000003 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.134896 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.134896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060766Jy sigma=0.000678 ! Fit after self-cal, rms=0.060751Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211789 Jy ! Component: 100 - total flux cleaned = 0.000437153 Jy ! Component: 150 - total flux cleaned = 0.000596922 Jy ! Component: 200 - total flux cleaned = 0.00077999 Jy ! Total flux subtracted in 200 components = 0.00077999 Jy ! Clean residual min=-0.001896 max=0.001572 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.135676 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.135676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060665Jy sigma=0.000677 ! Fit after self-cal, rms=0.060665Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060665Jy sigma=0.000677 ! Fit after self-cal, rms=0.061269Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.626 mas, bmaj=11.41 mas, bpa=-2.714 degrees ! Estimated noise=608.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.47275e-05 Jy ! Component: 100 - total flux cleaned = 0.000195169 Jy ! Component: 150 - total flux cleaned = 0.000240018 Jy ! Component: 200 - total flux cleaned = 0.000277279 Jy ! Total flux subtracted in 200 components = 0.000277279 Jy ! Clean residual min=-0.001761 max=0.001693 Jy/beam ! Clean residual mean=0.000005 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.135954 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.135954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061182Jy sigma=0.000676 ! Fit after self-cal, rms=0.061181Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.09667e-05 Jy ! Component: 100 - total flux cleaned = 0.000174653 Jy ! Component: 150 - total flux cleaned = 0.000253235 Jy ! Component: 200 - total flux cleaned = 0.000301616 Jy ! Total flux subtracted in 200 components = 0.000301616 Jy ! Clean residual min=-0.001660 max=0.001697 Jy/beam ! Clean residual mean=0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.136255 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.136255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061147Jy sigma=0.000676 ! Fit after self-cal, rms=0.061146Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.58 mas, bpa=-0.08282 degrees ! Estimated noise=480.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.268 x 7.58 at -0.08282 degrees (North through East) ! Clean map min=-0.0016518 max=0.11267 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=6.7 mas, bpa=-0.9264 degrees ! Estimated noise=670.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0877239 Jy ! Component: 100 - total flux cleaned = 0.109712 Jy ! Component: 150 - total flux cleaned = 0.118367 Jy ! Component: 200 - total flux cleaned = 0.122781 Jy ! Total flux subtracted in 200 components = 0.122781 Jy ! Clean residual min=-0.002248 max=0.002461 Jy/beam ! Clean residual mean=0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.122781 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.122781 Jy ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.58 mas, bpa=-0.08282 degrees ! Estimated noise=480.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391365 Jy ! Component: 100 - total flux cleaned = 0.0063286 Jy ! Component: 150 - total flux cleaned = 0.00809504 Jy ! Component: 200 - total flux cleaned = 0.00945005 Jy ! Total flux subtracted in 200 components = 0.00945005 Jy ! Clean residual min=-0.001388 max=0.001612 Jy/beam ! Clean residual mean=0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.132231 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 0.132231 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.626 mas, bmaj=11.41 mas, bpa=-2.714 degrees ! Estimated noise=608.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168618 Jy ! Component: 100 - total flux cleaned = 0.00265103 Jy ! Component: 150 - total flux cleaned = 0.00326674 Jy ! Component: 200 - total flux cleaned = 0.0035264 Jy ! Total flux subtracted in 200 components = 0.0035264 Jy ! Clean residual min=-0.001704 max=0.001630 Jy/beam ! Clean residual mean=0.000004 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.135757 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145219 Jy ! Component: 100 - total flux cleaned = 0.000250864 Jy ! Component: 150 - total flux cleaned = 0.000344151 Jy ! Component: 200 - total flux cleaned = 0.000379716 Jy ! Total flux subtracted in 200 components = 0.000379716 Jy ! Clean residual min=-0.001680 max=0.001661 Jy/beam ! Clean residual mean=0.000004 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.136137 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 90 components and 0.136137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.58 mas, bpa=-0.08282 degrees ! Estimated noise=480.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.83652e-05 Jy ! Component: 100 - total flux cleaned = -0.000184141 Jy ! Component: 150 - total flux cleaned = -0.000182686 Jy ! Component: 200 - total flux cleaned = -0.000182063 Jy ! Total flux subtracted in 200 components = -0.000182063 Jy ! Clean residual min=-0.001363 max=0.001556 Jy/beam ! Clean residual mean=0.000002 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.135955 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.135955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061013Jy sigma=0.000676 ! Fit after self-cal, rms=0.060994Jy sigma=0.000676 wmodel J0041+1339_S_2017_05_27_pus_map.mod ! Writing 108 model components to file: J0041+1339_S_2017_05_27_pus_map.mod wobs J0041+1339_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0041+1339_S_2017_05_27_pus_uvs.fits wwins J0041+1339_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0041+1339_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499951 Jy ! Component: 100 - total flux cleaned = 0.000623345 Jy ! Component: 150 - total flux cleaned = 0.000717271 Jy ! Component: 200 - total flux cleaned = 0.000852563 Jy ! Component: 250 - total flux cleaned = 0.000940266 Jy ! Component: 300 - total flux cleaned = 0.00106796 Jy ! Component: 350 - total flux cleaned = 0.0011298 Jy ! Component: 400 - total flux cleaned = 0.0011702 Jy ! Component: 450 - total flux cleaned = 0.00120981 Jy ! Component: 500 - total flux cleaned = 0.00126741 Jy ! Component: 550 - total flux cleaned = 0.00130471 Jy ! Component: 600 - total flux cleaned = 0.00132345 Jy ! Component: 650 - total flux cleaned = 0.00139647 Jy ! Component: 700 - total flux cleaned = 0.00148537 Jy ! Component: 750 - total flux cleaned = 0.00152023 Jy ! Component: 800 - total flux cleaned = 0.0015373 Jy ! Component: 850 - total flux cleaned = 0.00152046 Jy ! Component: 900 - total flux cleaned = 0.00152048 Jy ! Component: 950 - total flux cleaned = 0.00153687 Jy ! Component: 1000 - total flux cleaned = 0.00156895 Jy ! Component: 1050 - total flux cleaned = 0.00163227 Jy ! Component: 1100 - total flux cleaned = 0.00163198 Jy ! Component: 1150 - total flux cleaned = 0.00161658 Jy ! Component: 1200 - total flux cleaned = 0.00163145 Jy ! Component: 1250 - total flux cleaned = 0.00167631 Jy ! Component: 1300 - total flux cleaned = 0.00163225 Jy ! Component: 1350 - total flux cleaned = 0.00173422 Jy ! Component: 1400 - total flux cleaned = 0.00173411 Jy ! Component: 1450 - total flux cleaned = 0.00181955 Jy ! Component: 1500 - total flux cleaned = 0.0019179 Jy ! Component: 1550 - total flux cleaned = 0.00197318 Jy ! Component: 1600 - total flux cleaned = 0.00202786 Jy ! Component: 1650 - total flux cleaned = 0.00214932 Jy ! Component: 1700 - total flux cleaned = 0.00218944 Jy ! Component: 1750 - total flux cleaned = 0.0022424 Jy ! Component: 1800 - total flux cleaned = 0.00229447 Jy ! Component: 1850 - total flux cleaned = 0.00232045 Jy ! Component: 1900 - total flux cleaned = 0.00238415 Jy ! Component: 1950 - total flux cleaned = 0.00243474 Jy ! Component: 2000 - total flux cleaned = 0.00245973 Jy ! Component: 2050 - total flux cleaned = 0.00247223 Jy ! Component: 2100 - total flux cleaned = 0.00252108 Jy ! Component: 2150 - total flux cleaned = 0.00254535 Jy ! Component: 2200 - total flux cleaned = 0.00258131 Jy ! Component: 2250 - total flux cleaned = 0.00261698 Jy ! Component: 2300 - total flux cleaned = 0.00264035 Jy ! Component: 2350 - total flux cleaned = 0.00268698 Jy ! Component: 2400 - total flux cleaned = 0.0027215 Jy ! Component: 2450 - total flux cleaned = 0.0027441 Jy ! Component: 2500 - total flux cleaned = 0.00275539 Jy ! Component: 2550 - total flux cleaned = 0.00277783 Jy ! Component: 2600 - total flux cleaned = 0.00285571 Jy ! Component: 2650 - total flux cleaned = 0.00283377 Jy ! Component: 2700 - total flux cleaned = 0.0029103 Jy ! Component: 2750 - total flux cleaned = 0.0029211 Jy ! Component: 2800 - total flux cleaned = 0.00295337 Jy ! Component: 2850 - total flux cleaned = 0.00298538 Jy ! Component: 2900 - total flux cleaned = 0.00302768 Jy ! Component: 2950 - total flux cleaned = 0.00304861 Jy ! Component: 3000 - total flux cleaned = 0.0030695 Jy ! Component: 3050 - total flux cleaned = 0.00315218 Jy ! Component: 3100 - total flux cleaned = 0.00316241 Jy ! Component: 3150 - total flux cleaned = 0.00318274 Jy ! Component: 3200 - total flux cleaned = 0.00323322 Jy ! Component: 3250 - total flux cleaned = 0.00326311 Jy ! Component: 3300 - total flux cleaned = 0.00327316 Jy ! Component: 3350 - total flux cleaned = 0.00331269 Jy ! Component: 3400 - total flux cleaned = 0.00332239 Jy ! Component: 3450 - total flux cleaned = 0.00338076 Jy ! Component: 3500 - total flux cleaned = 0.00341938 Jy ! Component: 3550 - total flux cleaned = 0.00347703 Jy ! Component: 3600 - total flux cleaned = 0.00347691 Jy ! Component: 3650 - total flux cleaned = 0.00348642 Jy ! Component: 3700 - total flux cleaned = 0.00355216 Jy ! Component: 3750 - total flux cleaned = 0.00359885 Jy ! Component: 3800 - total flux cleaned = 0.00360804 Jy ! Component: 3850 - total flux cleaned = 0.00370008 Jy ! Component: 3900 - total flux cleaned = 0.0037275 Jy ! Component: 3950 - total flux cleaned = 0.00373653 Jy ! Component: 4000 - total flux cleaned = 0.00378156 Jy ! Component: 4050 - total flux cleaned = 0.00380837 Jy ! Total flux subtracted in 4096 components = 0.00380839 Jy ! Clean residual min=-0.000601 max=0.000499 Jy/beam ! Clean residual mean=0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.139763 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 407 components and 0.139763 Jy ![Exited script file: muppet] wmap "J0041+1339_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.268 x 7.58 at -0.08282 degrees (North through East) ! Clean map min=-0.00093728 max=0.11338 Jy/beam ! Writing clean map to FITS file: J0041+1339_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113379 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.437921 0.437921 0.875843 1.75169 3.50337 7.00674 14.0135 28.027 56.0539 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.268 x 7.58 at -0.08282 degrees (North through East) ! Clean map min=-0.00093728 max=0.11338 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0041+1339_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:53:13 2019