! Started logfile: J0040-3243_S_2017_02_19_pus_uvs.log on Sat May 4 18:39:12 2019 obs J0040-3243_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0040-3243_S_2017_02_19_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.610648 visibilities/baseline/integration-bin. ! Found source: J0040-3243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 5276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0040-3243_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906091Jy sigma=0.005701 ! Fit after self-cal, rms=0.892862Jy sigma=0.005617 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.326 mas, bpa=-4.514 degrees ! Estimated noise=2663.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806746 Jy ! Component: 100 - total flux cleaned = 0.104406 Jy ! Total flux subtracted in 100 components = 0.104406 Jy ! Clean residual min=-0.010119 max=0.011393 Jy/beam ! Clean residual mean=0.000009 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.104406 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.104406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118203Jy sigma=0.000680 ! Fit after self-cal, rms=0.118108Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=7.444 mas, bpa=-5.636 degrees ! Estimated noise=1725.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199584 Jy ! Component: 100 - total flux cleaned = 0.0292977 Jy ! Component: 150 - total flux cleaned = 0.0339998 Jy ! Component: 200 - total flux cleaned = 0.0365212 Jy ! Total flux subtracted in 200 components = 0.0365212 Jy ! Clean residual min=-0.007254 max=0.007627 Jy/beam ! Clean residual mean=-0.000011 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.140928 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.140928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114666Jy sigma=0.000661 ! Fit after self-cal, rms=0.114489Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.00* KP 1.06 ! LA 0.99 MK 1.03 NL 0.96 OV 1.02 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 1.00* KP 1.00 ! LA 1.01 MK 0.97 NL 1.20 OV 1.04 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.06 HN 1.00* KP 0.85 ! LA 0.75 MK 1.00 NL 1.31 OV 0.95 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.00* KP 1.00* ! LA 0.83 MK 1.06 NL 1.00* OV 0.93 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.114489Jy sigma=0.000660 ! Fit after self-cal, rms=0.112287Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=7.471 mas, bpa=-5.519 degrees ! Estimated noise=1718.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028382 Jy ! Component: 100 - total flux cleaned = 0.000200128 Jy ! Component: 150 - total flux cleaned = 0.000161306 Jy ! Component: 200 - total flux cleaned = 9.35727e-05 Jy ! Total flux subtracted in 200 components = 9.35727e-05 Jy ! Clean residual min=-0.004547 max=0.004593 Jy/beam ! Clean residual mean=-0.000010 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.141021 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.141021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112258Jy sigma=0.000653 ! Fit after self-cal, rms=0.112288Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112288Jy sigma=0.000652 ! Fit after self-cal, rms=0.112102Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.453 mas, bpa=-5.451 degrees ! Estimated noise=1710.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226897 Jy ! Component: 100 - total flux cleaned = 0.000189942 Jy ! Component: 150 - total flux cleaned = 0.000124914 Jy ! Component: 200 - total flux cleaned = 6.77552e-05 Jy ! Total flux subtracted in 200 components = 6.77552e-05 Jy ! Clean residual min=-0.004535 max=0.004350 Jy/beam ! Clean residual mean=-0.000010 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.141089 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.141089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112080Jy sigma=0.000652 ! Fit after self-cal, rms=0.112085Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.55848e-07 Jy ! Component: 100 - total flux cleaned = -2.55157e-05 Jy ! Component: 150 - total flux cleaned = -2.59359e-05 Jy ! Component: 200 - total flux cleaned = -1.67368e-06 Jy ! Total flux subtracted in 200 components = -1.67368e-06 Jy ! Clean residual min=-0.004556 max=0.004263 Jy/beam ! Clean residual mean=-0.000010 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.141087 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.141087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112073Jy sigma=0.000652 ! Fit after self-cal, rms=0.112072Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112072Jy sigma=0.000652 ! Fit after self-cal, rms=0.111565Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.432 mas, bpa=-5.357 degrees ! Estimated noise=1700.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169583 Jy ! Component: 100 - total flux cleaned = 0.000115021 Jy ! Component: 150 - total flux cleaned = 9.09759e-05 Jy ! Component: 200 - total flux cleaned = 6.80011e-05 Jy ! Total flux subtracted in 200 components = 6.80011e-05 Jy ! Clean residual min=-0.004513 max=0.004148 Jy/beam ! Clean residual mean=-0.000010 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.141155 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.141155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111553Jy sigma=0.000652 ! Fit after self-cal, rms=0.111552Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29889e-05 Jy ! Component: 100 - total flux cleaned = -7.46404e-05 Jy ! Component: 150 - total flux cleaned = -7.53264e-05 Jy ! Component: 200 - total flux cleaned = -7.44897e-05 Jy ! Total flux subtracted in 200 components = -7.44897e-05 Jy ! Clean residual min=-0.004524 max=0.004055 Jy/beam ! Clean residual mean=-0.000009 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.141081 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.141081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111545Jy sigma=0.000652 ! Fit after self-cal, rms=0.111543Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111543Jy sigma=0.000652 ! Fit after self-cal, rms=0.111115Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.23 mas, bmaj=21.54 mas, bpa=0.5555 degrees ! Estimated noise=2298.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287786 Jy ! Component: 100 - total flux cleaned = 0.00028319 Jy ! Component: 150 - total flux cleaned = 0.0002804 Jy ! Component: 200 - total flux cleaned = 0.000278474 Jy ! Total flux subtracted in 200 components = 0.000278474 Jy ! Clean residual min=-0.003863 max=0.004907 Jy/beam ! Clean residual mean=-0.000019 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.141359 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 38 components and 0.141359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111131Jy sigma=0.000652 ! Fit after self-cal, rms=0.111110Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137788 Jy ! Component: 100 - total flux cleaned = -0.000143366 Jy ! Component: 150 - total flux cleaned = -0.00014619 Jy ! Component: 200 - total flux cleaned = -0.000147962 Jy ! Total flux subtracted in 200 components = -0.000147962 Jy ! Clean residual min=-0.003739 max=0.004841 Jy/beam ! Clean residual mean=-0.000019 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.141211 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 38 components and 0.141211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111145Jy sigma=0.000652 ! Fit after self-cal, rms=0.111126Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.415 mas, bpa=-5.286 degrees ! Estimated noise=1692.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.81 x 7.415 at -5.286 degrees (North through East) ! Clean map min=-0.0043644 max=0.10783 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.298 mas, bpa=-3.836 degrees ! Estimated noise=2624.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0786536 Jy ! Component: 100 - total flux cleaned = 0.104046 Jy ! Component: 150 - total flux cleaned = 0.1178 Jy ! Component: 200 - total flux cleaned = 0.126152 Jy ! Total flux subtracted in 200 components = 0.126152 Jy ! Clean residual min=-0.006841 max=0.006303 Jy/beam ! Clean residual mean=-0.000001 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.126152 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.126152 Jy ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.415 mas, bpa=-5.286 degrees ! Estimated noise=1692.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879063 Jy ! Component: 100 - total flux cleaned = 0.0128652 Jy ! Component: 150 - total flux cleaned = 0.0153848 Jy ! Component: 200 - total flux cleaned = 0.0170076 Jy ! Total flux subtracted in 200 components = 0.0170076 Jy ! Clean residual min=-0.004263 max=0.003334 Jy/beam ! Clean residual mean=-0.000008 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.14316 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.14316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.23 mas, bmaj=21.54 mas, bpa=0.5555 degrees ! Estimated noise=2298.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905115 Jy ! Component: 100 - total flux cleaned = 0.00128119 Jy ! Component: 150 - total flux cleaned = 0.00154011 Jy ! Component: 200 - total flux cleaned = 0.00171717 Jy ! Total flux subtracted in 200 components = 0.00171717 Jy ! Clean residual min=-0.003602 max=0.003571 Jy/beam ! Clean residual mean=-0.000015 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.144877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88267e-05 Jy ! Component: 100 - total flux cleaned = 0.000142501 Jy ! Component: 150 - total flux cleaned = 0.000213318 Jy ! Component: 200 - total flux cleaned = 0.000255217 Jy ! Total flux subtracted in 200 components = 0.000255217 Jy ! Clean residual min=-0.003617 max=0.003528 Jy/beam ! Clean residual mean=-0.000014 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.145132 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.145132 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.415 mas, bpa=-5.286 degrees ! Estimated noise=1692.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.99479e-05 Jy ! Component: 100 - total flux cleaned = -5.733e-05 Jy ! Component: 150 - total flux cleaned = -9.20749e-05 Jy ! Component: 200 - total flux cleaned = -9.12849e-05 Jy ! Total flux subtracted in 200 components = -9.12849e-05 Jy ! Clean residual min=-0.003923 max=0.003256 Jy/beam ! Clean residual mean=-0.000007 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.145041 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 0.145041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111002Jy sigma=0.000651 ! Fit after self-cal, rms=0.110985Jy sigma=0.000651 wmodel J0040-3243_S_2017_02_19_pus_map.mod ! Writing 85 model components to file: J0040-3243_S_2017_02_19_pus_map.mod wobs J0040-3243_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0040-3243_S_2017_02_19_pus_uvs.fits wwins J0040-3243_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0040-3243_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175347 Jy ! Component: 100 - total flux cleaned = -0.00323323 Jy ! Component: 150 - total flux cleaned = -0.00439997 Jy ! Component: 200 - total flux cleaned = -0.00494037 Jy ! Component: 250 - total flux cleaned = -0.0049869 Jy ! Component: 300 - total flux cleaned = -0.00507282 Jy ! Component: 350 - total flux cleaned = -0.00532145 Jy ! Component: 400 - total flux cleaned = -0.00544231 Jy ! Component: 450 - total flux cleaned = -0.00578896 Jy ! Component: 500 - total flux cleaned = -0.00608531 Jy ! Component: 550 - total flux cleaned = -0.0063355 Jy ! Component: 600 - total flux cleaned = -0.0066109 Jy ! Component: 650 - total flux cleaned = -0.00681114 Jy ! Component: 700 - total flux cleaned = -0.00700539 Jy ! Component: 750 - total flux cleaned = -0.00722469 Jy ! Component: 800 - total flux cleaned = -0.00740792 Jy ! Component: 850 - total flux cleaned = -0.00752574 Jy ! Component: 900 - total flux cleaned = -0.00758208 Jy ! Component: 950 - total flux cleaned = -0.00761009 Jy ! Component: 1000 - total flux cleaned = -0.007748 Jy ! Component: 1050 - total flux cleaned = -0.0078273 Jy ! Component: 1100 - total flux cleaned = -0.00790473 Jy ! Component: 1150 - total flux cleaned = -0.00793015 Jy ! Component: 1200 - total flux cleaned = -0.00793022 Jy ! Component: 1250 - total flux cleaned = -0.00805106 Jy ! Component: 1300 - total flux cleaned = -0.00814469 Jy ! Component: 1350 - total flux cleaned = -0.00819075 Jy ! Component: 1400 - total flux cleaned = -0.00828202 Jy ! Component: 1450 - total flux cleaned = -0.00845865 Jy ! Component: 1500 - total flux cleaned = -0.00848009 Jy ! Component: 1550 - total flux cleaned = -0.00850163 Jy ! Component: 1600 - total flux cleaned = -0.00860607 Jy ! Component: 1650 - total flux cleaned = -0.00862662 Jy ! Component: 1700 - total flux cleaned = -0.00864665 Jy ! Component: 1750 - total flux cleaned = -0.00864675 Jy ! Component: 1800 - total flux cleaned = -0.00864723 Jy ! Component: 1850 - total flux cleaned = -0.00868614 Jy ! Component: 1900 - total flux cleaned = -0.00870526 Jy ! Component: 1950 - total flux cleaned = -0.00872381 Jy ! Component: 2000 - total flux cleaned = -0.00872386 Jy ! Component: 2050 - total flux cleaned = -0.0087419 Jy ! Component: 2100 - total flux cleaned = -0.00883172 Jy ! Component: 2150 - total flux cleaned = -0.00890288 Jy ! Component: 2200 - total flux cleaned = -0.00902593 Jy ! Component: 2250 - total flux cleaned = -0.00911297 Jy ! Component: 2300 - total flux cleaned = -0.0092512 Jy ! Component: 2350 - total flux cleaned = -0.00935388 Jy ! Component: 2400 - total flux cleaned = -0.00940486 Jy ! Component: 2450 - total flux cleaned = -0.00948942 Jy ! Component: 2500 - total flux cleaned = -0.00955647 Jy ! Component: 2550 - total flux cleaned = -0.00965629 Jy ! Component: 2600 - total flux cleaned = -0.00970597 Jy ! Component: 2650 - total flux cleaned = -0.00972229 Jy ! Component: 2700 - total flux cleaned = -0.00980428 Jy ! Component: 2750 - total flux cleaned = -0.0098695 Jy ! Component: 2800 - total flux cleaned = -0.00991854 Jy ! Component: 2850 - total flux cleaned = -0.0100482 Jy ! Component: 2900 - total flux cleaned = -0.0100805 Jy ! Component: 2950 - total flux cleaned = -0.0101772 Jy ! Component: 3000 - total flux cleaned = -0.0102574 Jy ! Component: 3050 - total flux cleaned = -0.0103055 Jy ! Component: 3100 - total flux cleaned = -0.0103854 Jy ! Component: 3150 - total flux cleaned = -0.0104652 Jy ! Component: 3200 - total flux cleaned = -0.010497 Jy ! Component: 3250 - total flux cleaned = -0.0105129 Jy ! Component: 3300 - total flux cleaned = -0.0106083 Jy ! Component: 3350 - total flux cleaned = -0.0106242 Jy ! Component: 3400 - total flux cleaned = -0.0106561 Jy ! Component: 3450 - total flux cleaned = -0.0107198 Jy ! Component: 3500 - total flux cleaned = -0.0107675 Jy ! Component: 3550 - total flux cleaned = -0.0108311 Jy ! Component: 3600 - total flux cleaned = -0.0109108 Jy ! Component: 3650 - total flux cleaned = -0.0109587 Jy ! Component: 3700 - total flux cleaned = -0.0109904 Jy ! Component: 3750 - total flux cleaned = -0.0110063 Jy ! Component: 3800 - total flux cleaned = -0.0109742 Jy ! Component: 3850 - total flux cleaned = -0.010942 Jy ! Component: 3900 - total flux cleaned = -0.0108936 Jy ! Component: 3950 - total flux cleaned = -0.0108287 Jy ! Component: 4000 - total flux cleaned = -0.0107798 Jy ! Component: 4050 - total flux cleaned = -0.0107308 Jy ! Total flux subtracted in 4096 components = -0.0106979 Jy ! Clean residual min=-0.001053 max=0.000988 Jy/beam ! Clean residual mean=-0.000003 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.134343 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 300 components and 0.134343 Jy ![Exited script file: muppet] wmap "J0040-3243_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.81 x 7.415 at -5.286 degrees (North through East) ! Clean map min=-0.0027753 max=0.10737 Jy/beam ! Writing clean map to FITS file: J0040-3243_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266895 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.745712 0.745712 1.49142 2.98285 5.9657 11.9314 23.8628 47.7256 95.4512 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.81 x 7.415 at -5.286 degrees (North through East) ! Clean map min=-0.0027753 max=0.10737 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0040-3243_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:39:17 2019