! Started logfile: J0040-3225_S_2017_02_24_pus_uvs.log on Sat May 4 11:15:12 2019 obs J0040-3225_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0040-3225_S_2017_02_24_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.951852 visibilities/baseline/integration-bin. ! Found source: J0040-3225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 16448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0040-3225_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942900Jy sigma=0.005511 ! Fit after self-cal, rms=0.917740Jy sigma=0.005395 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.537 mas, bmaj=7.02 mas, bpa=-5.799 degrees ! Estimated noise=1549.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070051 Jy ! Component: 100 - total flux cleaned = 0.0853446 Jy ! Total flux subtracted in 100 components = 0.0853446 Jy ! Clean residual min=-0.004373 max=0.004702 Jy/beam ! Clean residual mean=-0.000001 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.0853446 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0853446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125418Jy sigma=0.000661 ! Fit after self-cal, rms=0.125334Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.356 mas, bpa=-5.123 degrees ! Estimated noise=1037.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571689 Jy ! Component: 100 - total flux cleaned = 0.00814335 Jy ! Component: 150 - total flux cleaned = 0.00916922 Jy ! Component: 200 - total flux cleaned = 0.00931739 Jy ! Total flux subtracted in 200 components = 0.00931739 Jy ! Clean residual min=-0.003299 max=0.003009 Jy/beam ! Clean residual mean=-0.000004 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0946619 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0946619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125123Jy sigma=0.000659 ! Fit after self-cal, rms=0.125127Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 HN 1.10 KP 0.99 ! LA 0.97 MK 1.05 NL 0.96 OV 1.05 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.09 KP 0.95 ! LA 1.00 MK 0.95 NL 1.08 OV 1.04 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.01 HN 1.08 KP 1.07 ! LA 1.02 MK 1.00 NL 1.12 OV 0.91 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.05 KP 1.00* ! LA 1.03 MK 0.97 NL 1.00* OV 0.98 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.125127Jy sigma=0.000659 ! Fit after self-cal, rms=0.127473Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.311 mas, bpa=-5.042 degrees ! Estimated noise=1036.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148613 Jy ! Component: 100 - total flux cleaned = 0.00016934 Jy ! Component: 150 - total flux cleaned = 0.000169885 Jy ! Component: 200 - total flux cleaned = 0.000170711 Jy ! Total flux subtracted in 200 components = 0.000170711 Jy ! Clean residual min=-0.003319 max=0.002873 Jy/beam ! Clean residual mean=-0.000001 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0948327 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.0948327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127466Jy sigma=0.000658 ! Fit after self-cal, rms=0.127559Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127559Jy sigma=0.000658 ! Fit after self-cal, rms=0.128407Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.293 mas, bpa=-5.113 degrees ! Estimated noise=1036.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019197 Jy ! Component: 100 - total flux cleaned = 0.000209968 Jy ! Component: 150 - total flux cleaned = 0.000209761 Jy ! Component: 200 - total flux cleaned = 0.000208926 Jy ! Total flux subtracted in 200 components = 0.000208926 Jy ! Clean residual min=-0.003193 max=0.002833 Jy/beam ! Clean residual mean=0.000002 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0950416 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0950416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128402Jy sigma=0.000658 ! Fit after self-cal, rms=0.128440Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5571e-05 Jy ! Component: 100 - total flux cleaned = 1.52983e-05 Jy ! Component: 150 - total flux cleaned = 1.50627e-05 Jy ! Component: 200 - total flux cleaned = 1.54312e-05 Jy ! Total flux subtracted in 200 components = 1.54312e-05 Jy ! Clean residual min=-0.003213 max=0.002850 Jy/beam ! Clean residual mean=0.000002 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.095057 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.095057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128436Jy sigma=0.000658 ! Fit after self-cal, rms=0.128436Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128436Jy sigma=0.000658 ! Fit after self-cal, rms=0.128356Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=8.279 mas, bpa=-5.102 degrees ! Estimated noise=1035.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159998 Jy ! Component: 100 - total flux cleaned = 0.000175053 Jy ! Component: 150 - total flux cleaned = 0.000188411 Jy ! Component: 200 - total flux cleaned = 0.00018799 Jy ! Total flux subtracted in 200 components = 0.00018799 Jy ! Clean residual min=-0.003197 max=0.002833 Jy/beam ! Clean residual mean=0.000002 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.095245 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.095245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128352Jy sigma=0.000658 ! Fit after self-cal, rms=0.128342Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.66084e-05 Jy ! Component: 100 - total flux cleaned = 1.6508e-05 Jy ! Component: 150 - total flux cleaned = 1.61456e-05 Jy ! Component: 200 - total flux cleaned = 1.61535e-05 Jy ! Total flux subtracted in 200 components = 1.61535e-05 Jy ! Clean residual min=-0.003210 max=0.002798 Jy/beam ! Clean residual mean=0.000002 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0952612 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0952612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128339Jy sigma=0.000658 ! Fit after self-cal, rms=0.128339Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128339Jy sigma=0.000658 ! Fit after self-cal, rms=0.128039Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.243 mas, bmaj=23.02 mas, bpa=1.802 degrees ! Estimated noise=1261.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559795 Jy ! Component: 100 - total flux cleaned = 0.000561502 Jy ! Component: 150 - total flux cleaned = 0.000562711 Jy ! Component: 200 - total flux cleaned = 0.000563504 Jy ! Total flux subtracted in 200 components = 0.000563504 Jy ! Clean residual min=-0.002521 max=0.003097 Jy/beam ! Clean residual mean=0.000004 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.0958247 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 33 components and 0.0958247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128043Jy sigma=0.000658 ! Fit after self-cal, rms=0.128040Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.91588e-06 Jy ! Component: 100 - total flux cleaned = 9.73255e-06 Jy ! Component: 150 - total flux cleaned = 1.11376e-05 Jy ! Component: 200 - total flux cleaned = 1.05433e-05 Jy ! Total flux subtracted in 200 components = 1.05433e-05 Jy ! Clean residual min=-0.002510 max=0.003081 Jy/beam ! Clean residual mean=0.000004 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0958352 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0958352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128046Jy sigma=0.000658 ! Fit after self-cal, rms=0.128046Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.267 mas, bpa=-5.081 degrees ! Estimated noise=1033.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.267 at -5.081 degrees (North through East) ! Clean map min=-0.0030353 max=0.08681 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.527 mas, bmaj=6.936 mas, bpa=-5.722 degrees ! Estimated noise=1553.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700258 Jy ! Component: 100 - total flux cleaned = 0.0855947 Jy ! Component: 150 - total flux cleaned = 0.0905592 Jy ! Component: 200 - total flux cleaned = 0.0926114 Jy ! Total flux subtracted in 200 components = 0.0926114 Jy ! Clean residual min=-0.004212 max=0.004473 Jy/beam ! Clean residual mean=0.000001 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.0926114 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0926114 Jy ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.267 mas, bpa=-5.081 degrees ! Estimated noise=1033.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312446 Jy ! Component: 100 - total flux cleaned = 0.00390859 Jy ! Component: 150 - total flux cleaned = 0.00426434 Jy ! Component: 200 - total flux cleaned = 0.00443326 Jy ! Total flux subtracted in 200 components = 0.00443326 Jy ! Clean residual min=-0.003037 max=0.002658 Jy/beam ! Clean residual mean=0.000006 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0970446 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.0970446 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.243 mas, bmaj=23.02 mas, bpa=1.802 degrees ! Estimated noise=1261.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641738 Jy ! Component: 100 - total flux cleaned = 0.000744452 Jy ! Component: 150 - total flux cleaned = 0.000808704 Jy ! Component: 200 - total flux cleaned = 0.000862168 Jy ! Total flux subtracted in 200 components = 0.000862168 Jy ! Clean residual min=-0.002935 max=0.002876 Jy/beam ! Clean residual mean=0.000013 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.0979068 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54886e-05 Jy ! Component: 100 - total flux cleaned = 3.0992e-05 Jy ! Component: 150 - total flux cleaned = 4.53516e-05 Jy ! Component: 200 - total flux cleaned = 4.56144e-05 Jy ! Total flux subtracted in 200 components = 4.56144e-05 Jy ! Clean residual min=-0.002962 max=0.002863 Jy/beam ! Clean residual mean=0.000013 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.0979524 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.0979524 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.267 mas, bpa=-5.081 degrees ! Estimated noise=1033.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125713 Jy ! Component: 100 - total flux cleaned = -6.30487e-05 Jy ! Component: 150 - total flux cleaned = -6.27095e-05 Jy ! Component: 200 - total flux cleaned = -3.56444e-05 Jy ! Total flux subtracted in 200 components = -3.56444e-05 Jy ! Clean residual min=-0.002900 max=0.002652 Jy/beam ! Clean residual mean=0.000007 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0979167 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.0979167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127967Jy sigma=0.000657 ! Fit after self-cal, rms=0.127957Jy sigma=0.000657 wmodel J0040-3225_S_2017_02_24_pus_map.mod ! Writing 82 model components to file: J0040-3225_S_2017_02_24_pus_map.mod wobs J0040-3225_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0040-3225_S_2017_02_24_pus_uvs.fits wwins J0040-3225_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J0040-3225_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102203 Jy ! Component: 100 - total flux cleaned = -0.00135654 Jy ! Component: 150 - total flux cleaned = -0.00167314 Jy ! Component: 200 - total flux cleaned = -0.00189084 Jy ! Component: 250 - total flux cleaned = -0.00210149 Jy ! Component: 300 - total flux cleaned = -0.0023063 Jy ! Component: 350 - total flux cleaned = -0.00254555 Jy ! Component: 400 - total flux cleaned = -0.00281667 Jy ! Component: 450 - total flux cleaned = -0.00300493 Jy ! Component: 500 - total flux cleaned = -0.00315098 Jy ! Component: 550 - total flux cleaned = -0.00311511 Jy ! Component: 600 - total flux cleaned = -0.00304586 Jy ! Component: 650 - total flux cleaned = -0.00318397 Jy ! Component: 700 - total flux cleaned = -0.00318405 Jy ! Component: 750 - total flux cleaned = -0.00311859 Jy ! Component: 800 - total flux cleaned = -0.00321642 Jy ! Component: 850 - total flux cleaned = -0.00318428 Jy ! Component: 900 - total flux cleaned = -0.00321595 Jy ! Component: 950 - total flux cleaned = -0.00321598 Jy ! Component: 1000 - total flux cleaned = -0.00324635 Jy ! Component: 1050 - total flux cleaned = -0.00327637 Jy ! Component: 1100 - total flux cleaned = -0.00333596 Jy ! Component: 1150 - total flux cleaned = -0.00336551 Jy ! Component: 1200 - total flux cleaned = -0.0033945 Jy ! Component: 1250 - total flux cleaned = -0.00339499 Jy ! Component: 1300 - total flux cleaned = -0.0034794 Jy ! Component: 1350 - total flux cleaned = -0.00353422 Jy ! Component: 1400 - total flux cleaned = -0.00356126 Jy ! Component: 1450 - total flux cleaned = -0.00353385 Jy ! Component: 1500 - total flux cleaned = -0.00353367 Jy ! Component: 1550 - total flux cleaned = -0.00356027 Jy ! Component: 1600 - total flux cleaned = -0.00358684 Jy ! Component: 1650 - total flux cleaned = -0.00361265 Jy ! Component: 1700 - total flux cleaned = -0.003638 Jy ! Component: 1750 - total flux cleaned = -0.00361273 Jy ! Component: 1800 - total flux cleaned = -0.00363782 Jy ! Component: 1850 - total flux cleaned = -0.00366245 Jy ! Component: 1900 - total flux cleaned = -0.00356486 Jy ! Component: 1950 - total flux cleaned = -0.00356502 Jy ! Component: 2000 - total flux cleaned = -0.00358861 Jy ! Component: 2050 - total flux cleaned = -0.00358809 Jy ! Component: 2100 - total flux cleaned = -0.00354098 Jy ! Component: 2150 - total flux cleaned = -0.00358721 Jy ! Component: 2200 - total flux cleaned = -0.0035644 Jy ! Component: 2250 - total flux cleaned = -0.00372401 Jy ! Component: 2300 - total flux cleaned = -0.00379161 Jy ! Component: 2350 - total flux cleaned = -0.00379172 Jy ! Component: 2400 - total flux cleaned = -0.00383605 Jy ! Component: 2450 - total flux cleaned = -0.00383614 Jy ! Component: 2500 - total flux cleaned = -0.0038361 Jy ! Component: 2550 - total flux cleaned = -0.00387949 Jy ! Component: 2600 - total flux cleaned = -0.00392254 Jy ! Component: 2650 - total flux cleaned = -0.00390102 Jy ! Component: 2700 - total flux cleaned = -0.00390111 Jy ! Component: 2750 - total flux cleaned = -0.00396402 Jy ! Component: 2800 - total flux cleaned = -0.00398498 Jy ! Component: 2850 - total flux cleaned = -0.00396433 Jy ! Component: 2900 - total flux cleaned = -0.00406657 Jy ! Component: 2950 - total flux cleaned = -0.00400574 Jy ! Component: 3000 - total flux cleaned = -0.00406654 Jy ! Component: 3050 - total flux cleaned = -0.0040867 Jy ! Component: 3100 - total flux cleaned = -0.00412659 Jy ! Component: 3150 - total flux cleaned = -0.00412652 Jy ! Component: 3200 - total flux cleaned = -0.00416566 Jy ! Component: 3250 - total flux cleaned = -0.0041462 Jy ! Component: 3300 - total flux cleaned = -0.00420396 Jy ! Component: 3350 - total flux cleaned = -0.00426134 Jy ! Component: 3400 - total flux cleaned = -0.00429955 Jy ! Component: 3450 - total flux cleaned = -0.00428074 Jy ! Component: 3500 - total flux cleaned = -0.00439358 Jy ! Component: 3550 - total flux cleaned = -0.00441224 Jy ! Component: 3600 - total flux cleaned = -0.00443106 Jy ! Component: 3650 - total flux cleaned = -0.00450482 Jy ! Component: 3700 - total flux cleaned = -0.00455985 Jy ! Component: 3750 - total flux cleaned = -0.00454167 Jy ! Component: 3800 - total flux cleaned = -0.00461429 Jy ! Component: 3850 - total flux cleaned = -0.00463243 Jy ! Component: 3900 - total flux cleaned = -0.00463248 Jy ! Component: 3950 - total flux cleaned = -0.00465042 Jy ! Component: 4000 - total flux cleaned = -0.00468596 Jy ! Component: 4050 - total flux cleaned = -0.00475672 Jy ! Total flux subtracted in 4096 components = -0.00477422 Jy ! Clean residual min=-0.001015 max=0.001064 Jy/beam ! Clean residual mean=0.000002 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0931425 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 355 components and 0.0931426 Jy ![Exited script file: muppet] wmap "J0040-3225_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.267 at -5.081 degrees (North through East) ! Clean map min=-0.0027259 max=0.088222 Jy/beam ! Writing clean map to FITS file: J0040-3225_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0882222 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000316437 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07604 1.07604 2.15209 4.30418 8.60836 17.2167 34.4334 68.8669 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.267 at -5.081 degrees (North through East) ! Clean map min=-0.0027259 max=0.088222 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0040-3225_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:15:17 2019