! Started logfile: J0040-3225_S_2017_02_19_pus_uvs.log on Sat May 4 18:39:08 2019 obs J0040-3225_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0040-3225_S_2017_02_19_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.610648 visibilities/baseline/integration-bin. ! Found source: J0040-3225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 5276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0040-3225_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941215Jy sigma=0.005848 ! Fit after self-cal, rms=0.915006Jy sigma=0.005695 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=6.54 mas, bpa=-4.767 degrees ! Estimated noise=2607.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678572 Jy ! Component: 100 - total flux cleaned = 0.0828204 Jy ! Total flux subtracted in 100 components = 0.0828204 Jy ! Clean residual min=-0.007579 max=0.009346 Jy/beam ! Clean residual mean=0.000010 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.0828204 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0828204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113385Jy sigma=0.000649 ! Fit after self-cal, rms=0.113294Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.415 mas, bpa=-5.297 degrees ! Estimated noise=1741.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742954 Jy ! Component: 100 - total flux cleaned = 0.0110044 Jy ! Component: 150 - total flux cleaned = 0.0129163 Jy ! Component: 200 - total flux cleaned = 0.0139524 Jy ! Total flux subtracted in 200 components = 0.0139524 Jy ! Clean residual min=-0.005097 max=0.004952 Jy/beam ! Clean residual mean=0.000006 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.0967728 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.0967728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112706Jy sigma=0.000646 ! Fit after self-cal, rms=0.112678Jy sigma=0.000646 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.00* KP 1.04 ! LA 1.03 MK 1.05 NL 0.95 OV 1.10 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.00* KP 1.02 ! LA 1.04 MK 1.03 NL 1.08 OV 1.03 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.09 HN 1.00* KP 0.87 ! LA 0.74 MK 0.96 NL 1.13 OV 0.98 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 1.00* KP 1.00* ! LA 0.92 MK 1.08 NL 1.00* OV 1.05 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.112678Jy sigma=0.000646 ! Fit after self-cal, rms=0.110081Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.458 mas, bpa=-5.333 degrees ! Estimated noise=1746.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271978 Jy ! Component: 100 - total flux cleaned = -0.000302193 Jy ! Component: 150 - total flux cleaned = -0.000290467 Jy ! Component: 200 - total flux cleaned = -0.000278701 Jy ! Total flux subtracted in 200 components = -0.000278701 Jy ! Clean residual min=-0.004294 max=0.004259 Jy/beam ! Clean residual mean=0.000002 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.0964941 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0964941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110076Jy sigma=0.000642 ! Fit after self-cal, rms=0.110065Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110065Jy sigma=0.000642 ! Fit after self-cal, rms=0.110087Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=7.475 mas, bpa=-5.42 degrees ! Estimated noise=1745.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262299 Jy ! Component: 100 - total flux cleaned = -0.000306864 Jy ! Component: 150 - total flux cleaned = -0.000306345 Jy ! Component: 200 - total flux cleaned = -0.000297556 Jy ! Total flux subtracted in 200 components = -0.000297556 Jy ! Clean residual min=-0.004223 max=0.004280 Jy/beam ! Clean residual mean=0.000002 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0961965 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0961965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110085Jy sigma=0.000642 ! Fit after self-cal, rms=0.110096Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.9547e-05 Jy ! Component: 100 - total flux cleaned = 5.91874e-05 Jy ! Component: 150 - total flux cleaned = 7.708e-05 Jy ! Component: 200 - total flux cleaned = 8.60233e-05 Jy ! Total flux subtracted in 200 components = 8.60233e-05 Jy ! Clean residual min=-0.004208 max=0.004290 Jy/beam ! Clean residual mean=0.000002 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.0962825 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0962825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110095Jy sigma=0.000642 ! Fit after self-cal, rms=0.110096Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110096Jy sigma=0.000642 ! Fit after self-cal, rms=0.110049Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.485 mas, bpa=-5.454 degrees ! Estimated noise=1744.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258616 Jy ! Component: 100 - total flux cleaned = -0.0002885 Jy ! Component: 150 - total flux cleaned = -0.000288181 Jy ! Component: 200 - total flux cleaned = -0.000287826 Jy ! Total flux subtracted in 200 components = -0.000287826 Jy ! Clean residual min=-0.004210 max=0.004267 Jy/beam ! Clean residual mean=0.000002 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0959947 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.0959947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110047Jy sigma=0.000642 ! Fit after self-cal, rms=0.110049Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26581e-05 Jy ! Component: 100 - total flux cleaned = 2.92333e-05 Jy ! Component: 150 - total flux cleaned = 3.70039e-05 Jy ! Component: 200 - total flux cleaned = 4.46396e-05 Jy ! Total flux subtracted in 200 components = 4.46396e-05 Jy ! Clean residual min=-0.004200 max=0.004257 Jy/beam ! Clean residual mean=0.000002 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.0960393 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0960394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110048Jy sigma=0.000642 ! Fit after self-cal, rms=0.110049Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110049Jy sigma=0.000642 ! Fit after self-cal, rms=0.109957Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.181 mas, bmaj=21.51 mas, bpa=0.6817 degrees ! Estimated noise=2326.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161706 Jy ! Component: 100 - total flux cleaned = 0.000162665 Jy ! Component: 150 - total flux cleaned = 0.000150137 Jy ! Component: 200 - total flux cleaned = 0.000139331 Jy ! Total flux subtracted in 200 components = 0.000139331 Jy ! Clean residual min=-0.004342 max=0.004210 Jy/beam ! Clean residual mean=0.000003 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.0961787 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.0961787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109958Jy sigma=0.000642 ! Fit after self-cal, rms=0.109957Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55376e-05 Jy ! Component: 100 - total flux cleaned = 4.55079e-05 Jy ! Component: 150 - total flux cleaned = 3.36275e-05 Jy ! Component: 200 - total flux cleaned = 3.32057e-05 Jy ! Total flux subtracted in 200 components = 3.32057e-05 Jy ! Clean residual min=-0.004337 max=0.004215 Jy/beam ! Clean residual mean=0.000003 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.0962119 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0962119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109958Jy sigma=0.000642 ! Fit after self-cal, rms=0.109957Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.494 mas, bpa=-5.484 degrees ! Estimated noise=1742.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.846 x 7.494 at -5.484 degrees (North through East) ! Clean map min=-0.0039613 max=0.084558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.3 mas, bmaj=6.568 mas, bpa=-4.92 degrees ! Estimated noise=2645.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0687041 Jy ! Component: 100 - total flux cleaned = 0.0837558 Jy ! Component: 150 - total flux cleaned = 0.0886524 Jy ! Component: 200 - total flux cleaned = 0.0908957 Jy ! Total flux subtracted in 200 components = 0.0908957 Jy ! Clean residual min=-0.007173 max=0.006598 Jy/beam ! Clean residual mean=0.000006 rms=0.001709 Jy/beam ! Combined flux in latest and established models = 0.0908957 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0908957 Jy ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.494 mas, bpa=-5.484 degrees ! Estimated noise=1742.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300437 Jy ! Component: 100 - total flux cleaned = 0.00419448 Jy ! Component: 150 - total flux cleaned = 0.00434143 Jy ! Component: 200 - total flux cleaned = 0.00443475 Jy ! Total flux subtracted in 200 components = 0.00443475 Jy ! Clean residual min=-0.004287 max=0.004275 Jy/beam ! Clean residual mean=0.000002 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0953304 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.0953304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.181 mas, bmaj=21.51 mas, bpa=0.6817 degrees ! Estimated noise=2326.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000686241 Jy ! Component: 100 - total flux cleaned = 0.000687724 Jy ! Component: 150 - total flux cleaned = 0.000688754 Jy ! Component: 200 - total flux cleaned = 0.000673192 Jy ! Total flux subtracted in 200 components = 0.000673192 Jy ! Clean residual min=-0.004332 max=0.004213 Jy/beam ! Clean residual mean=0.000004 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.0960036 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.32995e-05 Jy ! Component: 100 - total flux cleaned = -2.50841e-05 Jy ! Component: 150 - total flux cleaned = -2.59835e-05 Jy ! Component: 200 - total flux cleaned = -3.56349e-05 Jy ! Total flux subtracted in 200 components = -3.56349e-05 Jy ! Clean residual min=-0.004323 max=0.004208 Jy/beam ! Clean residual mean=0.000004 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.095968 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.095968 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.494 mas, bpa=-5.484 degrees ! Estimated noise=1742.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000440509 Jy ! Component: 100 - total flux cleaned = -0.000368271 Jy ! Component: 150 - total flux cleaned = -0.000306162 Jy ! Component: 200 - total flux cleaned = -0.00029242 Jy ! Total flux subtracted in 200 components = -0.00029242 Jy ! Clean residual min=-0.004270 max=0.004196 Jy/beam ! Clean residual mean=0.000002 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0956756 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0956756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109960Jy sigma=0.000642 ! Fit after self-cal, rms=0.109955Jy sigma=0.000642 wmodel J0040-3225_S_2017_02_19_pus_map.mod ! Writing 41 model components to file: J0040-3225_S_2017_02_19_pus_map.mod wobs J0040-3225_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0040-3225_S_2017_02_19_pus_uvs.fits wwins J0040-3225_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0040-3225_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285205 Jy ! Component: 100 - total flux cleaned = 0.000873899 Jy ! Component: 150 - total flux cleaned = 0.0014705 Jy ! Component: 200 - total flux cleaned = 0.00169249 Jy ! Component: 250 - total flux cleaned = 0.00133363 Jy ! Component: 300 - total flux cleaned = 0.00108803 Jy ! Component: 350 - total flux cleaned = 0.000851107 Jy ! Component: 400 - total flux cleaned = 0.000532629 Jy ! Component: 450 - total flux cleaned = 0.000356087 Jy ! Component: 500 - total flux cleaned = 9.89849e-05 Jy ! Component: 550 - total flux cleaned = -0.000107661 Jy ! Component: 600 - total flux cleaned = -0.000268504 Jy ! Component: 650 - total flux cleaned = -0.00061807 Jy ! Component: 700 - total flux cleaned = -0.000805741 Jy ! Component: 750 - total flux cleaned = -0.00106155 Jy ! Component: 800 - total flux cleaned = -0.0012742 Jy ! Component: 850 - total flux cleaned = -0.00148143 Jy ! Component: 900 - total flux cleaned = -0.00164852 Jy ! Component: 950 - total flux cleaned = -0.00174559 Jy ! Component: 1000 - total flux cleaned = -0.00187258 Jy ! Component: 1050 - total flux cleaned = -0.00196487 Jy ! Component: 1100 - total flux cleaned = -0.00205562 Jy ! Component: 1150 - total flux cleaned = -0.00211465 Jy ! Component: 1200 - total flux cleaned = -0.00211484 Jy ! Component: 1250 - total flux cleaned = -0.00220013 Jy ! Component: 1300 - total flux cleaned = -0.00225597 Jy ! Component: 1350 - total flux cleaned = -0.00233816 Jy ! Component: 1400 - total flux cleaned = -0.00244417 Jy ! Component: 1450 - total flux cleaned = -0.0024696 Jy ! Component: 1500 - total flux cleaned = -0.00244427 Jy ! Component: 1550 - total flux cleaned = -0.00247012 Jy ! Component: 1600 - total flux cleaned = -0.00244543 Jy ! Component: 1650 - total flux cleaned = -0.00239666 Jy ! Component: 1700 - total flux cleaned = -0.00242081 Jy ! Component: 1750 - total flux cleaned = -0.00246774 Jy ! Component: 1800 - total flux cleaned = -0.0024442 Jy ! Component: 1850 - total flux cleaned = -0.00249034 Jy ! Component: 1900 - total flux cleaned = -0.00251304 Jy ! Component: 1950 - total flux cleaned = -0.00255802 Jy ! Component: 2000 - total flux cleaned = -0.00255799 Jy ! Component: 2050 - total flux cleaned = -0.00258022 Jy ! Component: 2100 - total flux cleaned = -0.00260207 Jy ! Component: 2150 - total flux cleaned = -0.00262373 Jy ! Component: 2200 - total flux cleaned = -0.00258085 Jy ! Component: 2250 - total flux cleaned = -0.00262357 Jy ! Component: 2300 - total flux cleaned = -0.00262351 Jy ! Component: 2350 - total flux cleaned = -0.002686 Jy ! Component: 2400 - total flux cleaned = -0.00268597 Jy ! Component: 2450 - total flux cleaned = -0.00270671 Jy ! Component: 2500 - total flux cleaned = -0.00270669 Jy ! Component: 2550 - total flux cleaned = -0.00270687 Jy ! Component: 2600 - total flux cleaned = -0.00272698 Jy ! Component: 2650 - total flux cleaned = -0.00266702 Jy ! Component: 2700 - total flux cleaned = -0.00264725 Jy ! Component: 2750 - total flux cleaned = -0.00256807 Jy ! Component: 2800 - total flux cleaned = -0.00248927 Jy ! Component: 2850 - total flux cleaned = -0.00244998 Jy ! Component: 2900 - total flux cleaned = -0.00233286 Jy ! Component: 2950 - total flux cleaned = -0.0022551 Jy ! Component: 3000 - total flux cleaned = -0.00221625 Jy ! Component: 3050 - total flux cleaned = -0.00213886 Jy ! Component: 3100 - total flux cleaned = -0.00204263 Jy ! Component: 3150 - total flux cleaned = -0.00196575 Jy ! Component: 3200 - total flux cleaned = -0.00188911 Jy ! Component: 3250 - total flux cleaned = -0.00183165 Jy ! Component: 3300 - total flux cleaned = -0.00171687 Jy ! Component: 3350 - total flux cleaned = -0.00165965 Jy ! Component: 3400 - total flux cleaned = -0.00160242 Jy ! Component: 3450 - total flux cleaned = -0.00154532 Jy ! Component: 3500 - total flux cleaned = -0.00150728 Jy ! Component: 3550 - total flux cleaned = -0.00146923 Jy ! Component: 3600 - total flux cleaned = -0.00146928 Jy ! Component: 3650 - total flux cleaned = -0.00139322 Jy ! Component: 3700 - total flux cleaned = -0.00137429 Jy ! Component: 3750 - total flux cleaned = -0.0013743 Jy ! Component: 3800 - total flux cleaned = -0.00133618 Jy ! Component: 3850 - total flux cleaned = -0.00137439 Jy ! Component: 3900 - total flux cleaned = -0.00133621 Jy ! Component: 3950 - total flux cleaned = -0.00133626 Jy ! Component: 4000 - total flux cleaned = -0.00135523 Jy ! Component: 4050 - total flux cleaned = -0.00133601 Jy ! Total flux subtracted in 4096 components = -0.0012976 Jy ! Clean residual min=-0.001154 max=0.001176 Jy/beam ! Clean residual mean=0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.094378 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 239 components and 0.094378 Jy ![Exited script file: muppet] wmap "J0040-3225_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.846 x 7.494 at -5.484 degrees (North through East) ! Clean map min=-0.0023931 max=0.08521 Jy/beam ! Writing clean map to FITS file: J0040-3225_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0852101 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000299949 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05603 1.05603 2.11206 4.22413 8.44826 16.8965 33.793 67.5861 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.846 x 7.494 at -5.484 degrees (North through East) ! Clean map min=-0.0023931 max=0.08521 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0040-3225_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:39:12 2019