! Started logfile: J0039+1411_S_2017_05_27_pus_uvs.log on Fri May 3 10:53:03 2019 obs J0039+1411_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0039+1411_S_2017_05_27_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98212 visibilities/baseline/integration-bin. ! Found source: J0039+1411 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 30760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0039+1411_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 890 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819205Jy sigma=0.046308 ! Fit after self-cal, rms=0.816758Jy sigma=0.046291 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=6.375 mas, bpa=2.441 degrees ! Estimated noise=423.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735051 Jy ! Component: 100 - total flux cleaned = 0.107554 Jy ! Total flux subtracted in 100 components = 0.107554 Jy ! Clean residual min=-0.020078 max=0.029585 Jy/beam ! Clean residual mean=0.000006 rms=0.007142 Jy/beam ! Combined flux in latest and established models = 0.107554 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.107554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149144Jy sigma=0.003133 ! Fit after self-cal, rms=0.148891Jy sigma=0.003132 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=7.022 mas, bpa=-0.9456 degrees ! Estimated noise=305.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343281 Jy ! Component: 100 - total flux cleaned = 0.0530629 Jy ! Component: 150 - total flux cleaned = 0.0641875 Jy ! Component: 200 - total flux cleaned = 0.0651724 Jy ! Total flux subtracted in 200 components = 0.0651724 Jy ! Clean residual min=-0.019539 max=0.026420 Jy/beam ! Clean residual mean=0.000005 rms=0.006772 Jy/beam ! Combined flux in latest and established models = 0.172726 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.172726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127022Jy sigma=0.003950 ! Fit after self-cal, rms=0.126643Jy sigma=0.003950 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.54 FD 0.72 HN 0.89 KP 0.85 ! LA 7.00 MK 1.03 NL 0.77 OV 0.84 ! PT 0.90 SC 0.73 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 5.00 FD 0.76 HN 0.96 KP 0.83 ! LA 0.81 MK 1.04 NL 0.96 OV 0.86 ! PT 0.88 SC 0.60 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 30.10 FD 0.78 HN 0.96 KP 0.87 ! LA 0.87 MK 1.07 NL 0.98 OV 0.79 ! PT 0.88 SC 0.61 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.93 KP 1.00* ! LA 0.87 MK 0.99 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.126643Jy sigma=0.003950 ! Fit after self-cal, rms=1.414810Jy sigma=0.000989 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.584 mas, bpa=-0.6831 degrees ! Estimated noise=394.196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014153 Jy ! Component: 100 - total flux cleaned = 0.0134766 Jy ! Component: 150 - total flux cleaned = 0.0124762 Jy ! Component: 200 - total flux cleaned = 0.0124752 Jy ! Total flux subtracted in 200 components = 0.0124752 Jy ! Clean residual min=-0.010938 max=0.008902 Jy/beam ! Clean residual mean=0.000013 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.185202 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.185202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.406009Jy sigma=0.000973 ! Fit after self-cal, rms=1.406114Jy sigma=0.000952 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.406114Jy sigma=0.000952 ! Fit after self-cal, rms=1.798518Jy sigma=0.000842 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=7.61 mas, bpa=-2.324 degrees ! Estimated noise=419.445 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106668 Jy ! Component: 100 - total flux cleaned = 0.0110517 Jy ! Component: 150 - total flux cleaned = 0.0113235 Jy ! Component: 200 - total flux cleaned = 0.0113239 Jy ! Total flux subtracted in 200 components = 0.0113239 Jy ! Clean residual min=-0.007717 max=0.006083 Jy/beam ! Clean residual mean=0.000029 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.196526 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.196526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.794795Jy sigma=0.000843 ! Fit after self-cal, rms=1.794799Jy sigma=0.000842 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.78613e-05 Jy ! Component: 100 - total flux cleaned = 8.32034e-05 Jy ! Component: 150 - total flux cleaned = -6.26334e-05 Jy ! Component: 200 - total flux cleaned = -6.35935e-05 Jy ! Total flux subtracted in 200 components = -6.35935e-05 Jy ! Clean residual min=-0.007930 max=0.006225 Jy/beam ! Clean residual mean=0.000030 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.196462 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.196462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.793660Jy sigma=0.000845 ! Fit after self-cal, rms=1.793659Jy sigma=0.000845 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.793659Jy sigma=0.000845 ! Fit after self-cal, rms=0.859107Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.552 mas, bpa=-3.151 degrees ! Estimated noise=430.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431269 Jy ! Component: 100 - total flux cleaned = 0.0052678 Jy ! Component: 150 - total flux cleaned = 0.00535685 Jy ! Component: 200 - total flux cleaned = 0.00552614 Jy ! Total flux subtracted in 200 components = 0.00552614 Jy ! Clean residual min=-0.003649 max=0.002699 Jy/beam ! Clean residual mean=-0.000003 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.201988 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.201988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.858258Jy sigma=0.000745 ! Fit after self-cal, rms=0.858249Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.75156e-05 Jy ! Component: 100 - total flux cleaned = 0.000213555 Jy ! Component: 150 - total flux cleaned = 0.000266553 Jy ! Component: 200 - total flux cleaned = 0.000314198 Jy ! Total flux subtracted in 200 components = 0.000314198 Jy ! Clean residual min=-0.003719 max=0.002695 Jy/beam ! Clean residual mean=-0.000002 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.202302 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.202302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.857996Jy sigma=0.000745 ! Fit after self-cal, rms=0.857996Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.857996Jy sigma=0.000745 ! Fit after self-cal, rms=0.918692Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.283 mas, bmaj=11.17 mas, bpa=-6.863 degrees ! Estimated noise=563.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526736 Jy ! Component: 100 - total flux cleaned = 0.00560284 Jy ! Component: 150 - total flux cleaned = 0.00553327 Jy ! Component: 200 - total flux cleaned = 0.0053974 Jy ! Total flux subtracted in 200 components = 0.0053974 Jy ! Clean residual min=-0.004466 max=0.003303 Jy/beam ! Clean residual mean=-0.000006 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.2077 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.2077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.917823Jy sigma=0.000745 ! Fit after self-cal, rms=0.917817Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435452 Jy ! Component: 100 - total flux cleaned = -0.000332778 Jy ! Component: 150 - total flux cleaned = -0.000415851 Jy ! Component: 200 - total flux cleaned = -0.000488388 Jy ! Total flux subtracted in 200 components = -0.000488388 Jy ! Clean residual min=-0.004521 max=0.003228 Jy/beam ! Clean residual mean=-0.000006 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.207211 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.207211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.917590Jy sigma=0.000746 ! Fit after self-cal, rms=0.917587Jy sigma=0.000746 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.586 mas, bpa=-3.767 degrees ! Estimated noise=445.279 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 7.586 at -3.767 degrees (North through East) ! Clean map min=-0.0038859 max=0.16605 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=6.626 mas, bpa=-4.293 degrees ! Estimated noise=740.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125562 Jy ! Component: 100 - total flux cleaned = 0.162422 Jy ! Component: 150 - total flux cleaned = 0.180284 Jy ! Component: 200 - total flux cleaned = 0.189691 Jy ! Total flux subtracted in 200 components = 0.189691 Jy ! Clean residual min=-0.004103 max=0.004636 Jy/beam ! Clean residual mean=-0.000003 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.189691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.189691 Jy ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.586 mas, bpa=-3.767 degrees ! Estimated noise=445.279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738035 Jy ! Component: 100 - total flux cleaned = 0.0114547 Jy ! Component: 150 - total flux cleaned = 0.0140666 Jy ! Component: 200 - total flux cleaned = 0.0157719 Jy ! Total flux subtracted in 200 components = 0.0157719 Jy ! Clean residual min=-0.003844 max=0.002529 Jy/beam ! Clean residual mean=-0.000003 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.205463 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 55 components and 0.205463 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.283 mas, bmaj=11.17 mas, bpa=-6.863 degrees ! Estimated noise=563.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012906 Jy ! Component: 100 - total flux cleaned = 0.00145875 Jy ! Component: 150 - total flux cleaned = 0.00157547 Jy ! Component: 200 - total flux cleaned = 0.00162075 Jy ! Total flux subtracted in 200 components = 0.00162075 Jy ! Clean residual min=-0.004621 max=0.003192 Jy/beam ! Clean residual mean=-0.000006 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.207084 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.82725e-05 Jy ! Component: 100 - total flux cleaned = 4.08815e-06 Jy ! Component: 150 - total flux cleaned = -1.07875e-05 Jy ! Component: 200 - total flux cleaned = -2.55621e-05 Jy ! Total flux subtracted in 200 components = -2.55621e-05 Jy ! Clean residual min=-0.004640 max=0.003190 Jy/beam ! Clean residual mean=-0.000006 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.207058 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.207058 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.586 mas, bpa=-3.767 degrees ! Estimated noise=445.279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623312 Jy ! Component: 100 - total flux cleaned = 0.000744275 Jy ! Component: 150 - total flux cleaned = 0.000811764 Jy ! Component: 200 - total flux cleaned = 0.000829608 Jy ! Total flux subtracted in 200 components = 0.000829608 Jy ! Clean residual min=-0.003872 max=0.002443 Jy/beam ! Clean residual mean=-0.000003 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.207888 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 76 components and 0.207888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.917251Jy sigma=0.000746 ! Fit after self-cal, rms=0.917249Jy sigma=0.000745 wmodel J0039+1411_S_2017_05_27_pus_map.mod ! Writing 76 model components to file: J0039+1411_S_2017_05_27_pus_map.mod wobs J0039+1411_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0039+1411_S_2017_05_27_pus_uvs.fits wwins J0039+1411_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0039+1411_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175371 Jy ! Component: 100 - total flux cleaned = -0.00332394 Jy ! Component: 150 - total flux cleaned = -0.00478448 Jy ! Component: 200 - total flux cleaned = -0.00616661 Jy ! Component: 250 - total flux cleaned = -0.00748848 Jy ! Component: 300 - total flux cleaned = -0.00875745 Jy ! Component: 350 - total flux cleaned = -0.0099817 Jy ! Component: 400 - total flux cleaned = -0.0110717 Jy ! Component: 450 - total flux cleaned = -0.0120822 Jy ! Component: 500 - total flux cleaned = -0.0130627 Jy ! Component: 550 - total flux cleaned = -0.0138437 Jy ! Component: 600 - total flux cleaned = -0.0146473 Jy ! Component: 650 - total flux cleaned = -0.0153485 Jy ! Component: 700 - total flux cleaned = -0.0159125 Jy ! Component: 750 - total flux cleaned = -0.0162677 Jy ! Component: 800 - total flux cleaned = -0.0166169 Jy ! Component: 850 - total flux cleaned = -0.017036 Jy ! Component: 900 - total flux cleaned = -0.0173731 Jy ! Component: 950 - total flux cleaned = -0.0177046 Jy ! Component: 1000 - total flux cleaned = -0.0179943 Jy ! Component: 1050 - total flux cleaned = -0.0181725 Jy ! Component: 1100 - total flux cleaned = -0.0183139 Jy ! Component: 1150 - total flux cleaned = -0.018558 Jy ! Component: 1200 - total flux cleaned = -0.0186609 Jy ! Component: 1250 - total flux cleaned = -0.0188313 Jy ! Component: 1300 - total flux cleaned = -0.0188653 Jy ! Component: 1350 - total flux cleaned = -0.0190326 Jy ! Component: 1400 - total flux cleaned = -0.0191974 Jy ! Component: 1450 - total flux cleaned = -0.0192629 Jy ! Component: 1500 - total flux cleaned = -0.0194242 Jy ! Component: 1550 - total flux cleaned = -0.0194243 Jy ! Component: 1600 - total flux cleaned = -0.019488 Jy ! Component: 1650 - total flux cleaned = -0.0195512 Jy ! Component: 1700 - total flux cleaned = -0.0196759 Jy ! Component: 1750 - total flux cleaned = -0.0196756 Jy ! Component: 1800 - total flux cleaned = -0.0197369 Jy ! Component: 1850 - total flux cleaned = -0.0197063 Jy ! Component: 1900 - total flux cleaned = -0.0196762 Jy ! Component: 1950 - total flux cleaned = -0.0197366 Jy ! Component: 2000 - total flux cleaned = -0.0199149 Jy ! Component: 2050 - total flux cleaned = -0.0198854 Jy ! Component: 2100 - total flux cleaned = -0.0199438 Jy ! Component: 2150 - total flux cleaned = -0.0199732 Jy ! Component: 2200 - total flux cleaned = -0.0199444 Jy ! Component: 2250 - total flux cleaned = -0.0201162 Jy ! Component: 2300 - total flux cleaned = -0.0201161 Jy ! Component: 2350 - total flux cleaned = -0.020229 Jy ! Component: 2400 - total flux cleaned = -0.0202291 Jy ! Component: 2450 - total flux cleaned = -0.0202848 Jy ! Component: 2500 - total flux cleaned = -0.0202847 Jy ! Component: 2550 - total flux cleaned = -0.0203396 Jy ! Component: 2600 - total flux cleaned = -0.0203126 Jy ! Component: 2650 - total flux cleaned = -0.0203941 Jy ! Component: 2700 - total flux cleaned = -0.0204211 Jy ! Component: 2750 - total flux cleaned = -0.0205014 Jy ! Component: 2800 - total flux cleaned = -0.0204748 Jy ! Component: 2850 - total flux cleaned = -0.0203955 Jy ! Component: 2900 - total flux cleaned = -0.0204745 Jy ! Component: 2950 - total flux cleaned = -0.0204485 Jy ! Component: 3000 - total flux cleaned = -0.0204224 Jy ! Component: 3050 - total flux cleaned = -0.0205518 Jy ! Component: 3100 - total flux cleaned = -0.0205259 Jy ! Component: 3150 - total flux cleaned = -0.020449 Jy ! Component: 3200 - total flux cleaned = -0.0205254 Jy ! Component: 3250 - total flux cleaned = -0.0205254 Jy ! Component: 3300 - total flux cleaned = -0.0205508 Jy ! Component: 3350 - total flux cleaned = -0.020601 Jy ! Component: 3400 - total flux cleaned = -0.020601 Jy ! Component: 3450 - total flux cleaned = -0.0206753 Jy ! Component: 3500 - total flux cleaned = -0.0207492 Jy ! Component: 3550 - total flux cleaned = -0.020798 Jy ! Component: 3600 - total flux cleaned = -0.0207736 Jy ! Component: 3650 - total flux cleaned = -0.0207736 Jy ! Component: 3700 - total flux cleaned = -0.020822 Jy ! Component: 3750 - total flux cleaned = -0.0209183 Jy ! Component: 3800 - total flux cleaned = -0.0208943 Jy ! Component: 3850 - total flux cleaned = -0.0209182 Jy ! Component: 3900 - total flux cleaned = -0.0209893 Jy ! Component: 3950 - total flux cleaned = -0.0209656 Jy ! Component: 4000 - total flux cleaned = -0.0210595 Jy ! Component: 4050 - total flux cleaned = -0.0210595 Jy ! Total flux subtracted in 4096 components = -0.0210828 Jy ! Clean residual min=-0.001491 max=0.001355 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.186805 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 397 components and 0.186805 Jy ![Exited script file: muppet] wmap "J0039+1411_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 7.586 at -3.767 degrees (North through East) ! Clean map min=-0.0034801 max=0.16859 Jy/beam ! Writing clean map to FITS file: J0039+1411_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168587 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000446217 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.794041 0.794041 1.58808 3.17616 6.35233 12.7047 25.4093 50.8186 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 7.586 at -3.767 degrees (North through East) ! Clean map min=-0.0034801 max=0.16859 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0039+1411_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:53:08 2019