! Started logfile: J0038+4137_S_2017_04_28_pus_uvs.log on Thu May 2 16:13:06 2019 obs J0038+4137_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0038+4137_S_2017_04_28_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683333 visibilities/baseline/integration-bin. ! Found source: J0038+4137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0038+4137_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.831795Jy sigma=0.007816 ! Fit after self-cal, rms=0.829103Jy sigma=0.007793 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.876 mas, bpa=28.51 degrees ! Estimated noise=3351.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130776 Jy ! Component: 100 - total flux cleaned = 0.164403 Jy ! Total flux subtracted in 100 components = 0.164403 Jy ! Clean residual min=-0.015455 max=0.017716 Jy/beam ! Clean residual mean=-0.000019 rms=0.004509 Jy/beam ! Combined flux in latest and established models = 0.164403 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.164403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097136Jy sigma=0.000838 ! Fit after self-cal, rms=0.097074Jy sigma=0.000837 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=8.584 mas, bpa=29.34 degrees ! Estimated noise=2677.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260208 Jy ! Component: 100 - total flux cleaned = 0.0395644 Jy ! Component: 150 - total flux cleaned = 0.0472928 Jy ! Component: 200 - total flux cleaned = 0.0513839 Jy ! Total flux subtracted in 200 components = 0.0513839 Jy ! Clean residual min=-0.013380 max=0.019092 Jy/beam ! Clean residual mean=0.000025 rms=0.004325 Jy/beam ! Combined flux in latest and established models = 0.215787 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.215787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091110Jy sigma=0.000758 ! Fit after self-cal, rms=0.090948Jy sigma=0.000756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.12 HN 0.92 KP 1.00* ! LA 1.30 MK 1.09 NL 0.94 OV 0.92 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 1.03 KP 1.00* ! LA 1.31 MK 1.00 NL 1.08 OV 0.97 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 1.00 KP 1.00* ! LA 1.10 MK 1.04 NL 1.05 OV 0.91 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.96 HN 1.05 KP 1.00* ! LA 1.00 MK 1.05 NL 1.00* OV 1.00* ! PT 0.85 SC 1.00* ! ! ! Fit before self-cal, rms=0.090948Jy sigma=0.000756 ! Fit after self-cal, rms=0.090313Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=8.516 mas, bpa=29.91 degrees ! Estimated noise=2635.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165728 Jy ! Component: 100 - total flux cleaned = 0.0251162 Jy ! Component: 150 - total flux cleaned = 0.0295724 Jy ! Component: 200 - total flux cleaned = 0.0331173 Jy ! Total flux subtracted in 200 components = 0.0331173 Jy ! Clean residual min=-0.007682 max=0.007621 Jy/beam ! Clean residual mean=-0.000013 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.248904 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 56 components and 0.248904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087146Jy sigma=0.000679 ! Fit after self-cal, rms=0.087140Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087140Jy sigma=0.000677 ! Fit after self-cal, rms=0.087608Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=8.532 mas, bpa=29.97 degrees ! Estimated noise=2601.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376832 Jy ! Component: 100 - total flux cleaned = 0.00625839 Jy ! Component: 150 - total flux cleaned = 0.00827393 Jy ! Component: 200 - total flux cleaned = 0.00996518 Jy ! Total flux subtracted in 200 components = 0.00996518 Jy ! Clean residual min=-0.007184 max=0.006678 Jy/beam ! Clean residual mean=0.000001 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.258869 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 82 components and 0.258869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087177Jy sigma=0.000666 ! Fit after self-cal, rms=0.087197Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305364 Jy ! Component: 100 - total flux cleaned = 0.00177198 Jy ! Component: 150 - total flux cleaned = 0.00279627 Jy ! Component: 200 - total flux cleaned = 0.00356576 Jy ! Total flux subtracted in 200 components = 0.00356576 Jy ! Clean residual min=-0.007024 max=0.006240 Jy/beam ! Clean residual mean=0.000004 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.262435 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 101 components and 0.262435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087070Jy sigma=0.000664 ! Fit after self-cal, rms=0.087061Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087061Jy sigma=0.000664 ! Fit after self-cal, rms=0.087735Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.547 mas, bpa=29.91 degrees ! Estimated noise=2596.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.43796e-05 Jy ! Component: 100 - total flux cleaned = 0.000687776 Jy ! Component: 150 - total flux cleaned = 0.00130075 Jy ! Component: 200 - total flux cleaned = 0.00190484 Jy ! Total flux subtracted in 200 components = 0.00190484 Jy ! Clean residual min=-0.006902 max=0.006077 Jy/beam ! Clean residual mean=0.000005 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.26434 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 120 components and 0.26434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087673Jy sigma=0.000662 ! Fit after self-cal, rms=0.087681Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214262 Jy ! Component: 100 - total flux cleaned = 0.000783466 Jy ! Component: 150 - total flux cleaned = 0.00134218 Jy ! Component: 200 - total flux cleaned = 0.00168459 Jy ! Total flux subtracted in 200 components = 0.00168459 Jy ! Clean residual min=-0.006797 max=0.006066 Jy/beam ! Clean residual mean=0.000007 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.266024 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 0.266024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087653Jy sigma=0.000661 ! Fit after self-cal, rms=0.087646Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087646Jy sigma=0.000661 ! Fit after self-cal, rms=0.087937Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.622 mas, bmaj=9.564 mas, bpa=26.28 degrees ! Estimated noise=3216.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596676 Jy ! Component: 100 - total flux cleaned = 0.000906688 Jy ! Component: 150 - total flux cleaned = 0.00100316 Jy ! Component: 200 - total flux cleaned = 0.00108767 Jy ! Total flux subtracted in 200 components = 0.00108767 Jy ! Clean residual min=-0.006676 max=0.006186 Jy/beam ! Clean residual mean=0.000017 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 0.267112 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.267112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087913Jy sigma=0.000660 ! Fit after self-cal, rms=0.087900Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473986 Jy ! Component: 100 - total flux cleaned = 0.00066353 Jy ! Component: 150 - total flux cleaned = 0.000768386 Jy ! Component: 200 - total flux cleaned = 0.0008963 Jy ! Total flux subtracted in 200 components = 0.0008963 Jy ! Clean residual min=-0.006565 max=0.006033 Jy/beam ! Clean residual mean=0.000019 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.268008 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 157 components and 0.268008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087903Jy sigma=0.000660 ! Fit after self-cal, rms=0.087893Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.555 mas, bpa=29.88 degrees ! Estimated noise=2593.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.555 at 29.88 degrees (North through East) ! Clean map min=-0.006361 max=0.17701 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=7.865 mas, bpa=28.97 degrees ! Estimated noise=3124.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127074 Jy ! Component: 100 - total flux cleaned = 0.15984 Jy ! Component: 150 - total flux cleaned = 0.177734 Jy ! Component: 200 - total flux cleaned = 0.189895 Jy ! Total flux subtracted in 200 components = 0.189895 Jy ! Clean residual min=-0.011329 max=0.013567 Jy/beam ! Clean residual mean=-0.000028 rms=0.003285 Jy/beam ! Combined flux in latest and established models = 0.189895 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.189895 Jy ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.555 mas, bpa=29.88 degrees ! Estimated noise=2593.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-105.5, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01895 Jy ! Component: 100 - total flux cleaned = 0.0314471 Jy ! Component: 150 - total flux cleaned = 0.0409928 Jy ! Component: 200 - total flux cleaned = 0.047171 Jy ! Total flux subtracted in 200 components = 0.047171 Jy ! Clean residual min=-0.008314 max=0.007903 Jy/beam ! Clean residual mean=-0.000031 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.237066 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 51 components and 0.237066 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.622 mas, bmaj=9.564 mas, bpa=26.28 degrees ! Estimated noise=3216.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102836 Jy ! Component: 100 - total flux cleaned = 0.0143324 Jy ! Component: 150 - total flux cleaned = 0.0173779 Jy ! Component: 200 - total flux cleaned = 0.0198741 Jy ! Total flux subtracted in 200 components = 0.0198741 Jy ! Clean residual min=-0.007974 max=0.007843 Jy/beam ! Clean residual mean=-0.000014 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.25694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192073 Jy ! Component: 100 - total flux cleaned = 0.00384333 Jy ! Component: 150 - total flux cleaned = 0.00550775 Jy ! Component: 200 - total flux cleaned = 0.0067559 Jy ! Total flux subtracted in 200 components = 0.0067559 Jy ! Clean residual min=-0.007261 max=0.007187 Jy/beam ! Clean residual mean=-0.000000 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.263696 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 120 components and 0.263696 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.555 mas, bpa=29.88 degrees ! Estimated noise=2593.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00049065 Jy ! Component: 100 - total flux cleaned = 1.86974e-05 Jy ! Component: 150 - total flux cleaned = 0.00056983 Jy ! Component: 200 - total flux cleaned = 0.000902187 Jy ! Total flux subtracted in 200 components = 0.000902187 Jy ! Clean residual min=-0.006412 max=0.005258 Jy/beam ! Clean residual mean=0.000001 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.264598 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 144 components and 0.264598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087450Jy sigma=0.000657 ! Fit after self-cal, rms=0.087397Jy sigma=0.000657 wmodel J0038+4137_S_2017_04_28_pus_map.mod ! Writing 144 model components to file: J0038+4137_S_2017_04_28_pus_map.mod wobs J0038+4137_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0038+4137_S_2017_04_28_pus_uvs.fits wwins J0038+4137_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0038+4137_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00214811 Jy ! Component: 100 - total flux cleaned = -0.0032519 Jy ! Component: 150 - total flux cleaned = -0.00394109 Jy ! Component: 200 - total flux cleaned = -0.00467128 Jy ! Component: 250 - total flux cleaned = -0.00536202 Jy ! Component: 300 - total flux cleaned = -0.00594856 Jy ! Component: 350 - total flux cleaned = -0.00630085 Jy ! Component: 400 - total flux cleaned = -0.00677331 Jy ! Component: 450 - total flux cleaned = -0.00690254 Jy ! Component: 500 - total flux cleaned = -0.0071535 Jy ! Component: 550 - total flux cleaned = -0.00751985 Jy ! Component: 600 - total flux cleaned = -0.00799229 Jy ! Component: 650 - total flux cleaned = -0.0081631 Jy ! Component: 700 - total flux cleaned = -0.00838733 Jy ! Component: 750 - total flux cleaned = -0.00876676 Jy ! Component: 800 - total flux cleaned = -0.00887307 Jy ! Component: 850 - total flux cleaned = -0.00913123 Jy ! Component: 900 - total flux cleaned = -0.0095314 Jy ! Component: 950 - total flux cleaned = -0.00972635 Jy ! Component: 1000 - total flux cleaned = -0.00996611 Jy ! Component: 1050 - total flux cleaned = -0.010342 Jy ! Component: 1100 - total flux cleaned = -0.0106191 Jy ! Component: 1150 - total flux cleaned = -0.0108012 Jy ! Component: 1200 - total flux cleaned = -0.0111137 Jy ! Component: 1250 - total flux cleaned = -0.011332 Jy ! Component: 1300 - total flux cleaned = -0.0115901 Jy ! Component: 1350 - total flux cleaned = -0.0116743 Jy ! Component: 1400 - total flux cleaned = -0.0118409 Jy ! Component: 1450 - total flux cleaned = -0.0120053 Jy ! Component: 1500 - total flux cleaned = -0.0121671 Jy ! Component: 1550 - total flux cleaned = -0.0122478 Jy ! Component: 1600 - total flux cleaned = -0.0124451 Jy ! Component: 1650 - total flux cleaned = -0.0125618 Jy ! Component: 1700 - total flux cleaned = -0.0127533 Jy ! Component: 1750 - total flux cleaned = -0.0128286 Jy ! Component: 1800 - total flux cleaned = -0.0128666 Jy ! Component: 1850 - total flux cleaned = -0.0129411 Jy ! Component: 1900 - total flux cleaned = -0.0131969 Jy ! Component: 1950 - total flux cleaned = -0.0133058 Jy ! Component: 2000 - total flux cleaned = -0.0134847 Jy ! Component: 2050 - total flux cleaned = -0.0135907 Jy ! Component: 2100 - total flux cleaned = -0.0138711 Jy ! Component: 2150 - total flux cleaned = -0.0140097 Jy ! Component: 2200 - total flux cleaned = -0.0141467 Jy ! Component: 2250 - total flux cleaned = -0.0142829 Jy ! Component: 2300 - total flux cleaned = -0.0143165 Jy ! Component: 2350 - total flux cleaned = -0.0145836 Jy ! Component: 2400 - total flux cleaned = -0.014517 Jy ! Component: 2450 - total flux cleaned = -0.014616 Jy ! Component: 2500 - total flux cleaned = -0.0147141 Jy ! Component: 2550 - total flux cleaned = -0.0147788 Jy ! Component: 2600 - total flux cleaned = -0.0148751 Jy ! Component: 2650 - total flux cleaned = -0.015067 Jy ! Component: 2700 - total flux cleaned = -0.0151943 Jy ! Component: 2750 - total flux cleaned = -0.0152893 Jy ! Component: 2800 - total flux cleaned = -0.0155104 Jy ! Component: 2850 - total flux cleaned = -0.0155418 Jy ! Component: 2900 - total flux cleaned = -0.015761 Jy ! Component: 2950 - total flux cleaned = -0.0158235 Jy ! Component: 3000 - total flux cleaned = -0.016072 Jy ! Component: 3050 - total flux cleaned = -0.0161648 Jy ! Component: 3100 - total flux cleaned = -0.016134 Jy ! Component: 3150 - total flux cleaned = -0.0162568 Jy ! Component: 3200 - total flux cleaned = -0.0162876 Jy ! Component: 3250 - total flux cleaned = -0.0163792 Jy ! Component: 3300 - total flux cleaned = -0.0163791 Jy ! Component: 3350 - total flux cleaned = -0.0164704 Jy ! Component: 3400 - total flux cleaned = -0.01644 Jy ! Component: 3450 - total flux cleaned = -0.0164703 Jy ! Component: 3500 - total flux cleaned = -0.0164703 Jy ! Component: 3550 - total flux cleaned = -0.0166208 Jy ! Component: 3600 - total flux cleaned = -0.0166209 Jy ! Component: 3650 - total flux cleaned = -0.016681 Jy ! Component: 3700 - total flux cleaned = -0.016681 Jy ! Component: 3750 - total flux cleaned = -0.016801 Jy ! Component: 3800 - total flux cleaned = -0.016891 Jy ! Component: 3850 - total flux cleaned = -0.0169809 Jy ! Component: 3900 - total flux cleaned = -0.0171008 Jy ! Component: 3950 - total flux cleaned = -0.0172207 Jy ! Component: 4000 - total flux cleaned = -0.0173108 Jy ! Component: 4050 - total flux cleaned = -0.0173709 Jy ! Total flux subtracted in 4096 components = -0.0174911 Jy ! Clean residual min=-0.001664 max=0.001671 Jy/beam ! Clean residual mean=-0.000010 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.247107 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 398 components and 0.247107 Jy ![Exited script file: muppet] wmap "J0038+4137_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.555 at 29.88 degrees (North through East) ! Clean map min=-0.0055923 max=0.17399 Jy/beam ! Writing clean map to FITS file: J0038+4137_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173994 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00052763 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.909737 0.909737 1.81947 3.63895 7.27789 14.5558 29.1116 58.2231 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.555 at 29.88 degrees (North through East) ! Clean map min=-0.0055923 max=0.17399 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0038+4137_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:13:11 2019