! Started logfile: J0037+3659_S_2017_05_01_pus_uvs.log on Wed May 1 18:22:47 2019 obs J0037+3659_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0037+3659_S_2017_05_01_pus_uva.fits ! AN table 1: 227 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.714146 visibilities/baseline/integration-bin. ! Found source: J0037+3659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 29180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0037+3659_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 462 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1317 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941733Jy sigma=0.008290 ! Fit after self-cal, rms=0.929182Jy sigma=0.008212 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=6.493 mas, bpa=10.31 degrees ! Estimated noise=920.778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565748 Jy ! Component: 100 - total flux cleaned = 0.0689979 Jy ! Total flux subtracted in 100 components = 0.0689979 Jy ! Clean residual min=-0.003924 max=0.005238 Jy/beam ! Clean residual mean=0.000011 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.0689979 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0689979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085344Jy sigma=0.000687 ! Fit after self-cal, rms=0.085322Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=7.202 mas, bpa=10 degrees ! Estimated noise=528.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (68.5, 81). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831461 Jy ! Component: 100 - total flux cleaned = 0.0145756 Jy ! Component: 150 - total flux cleaned = 0.0196046 Jy ! Component: 200 - total flux cleaned = 0.0237029 Jy ! Total flux subtracted in 200 components = 0.0237029 Jy ! Clean residual min=-0.003639 max=0.004097 Jy/beam ! Clean residual mean=0.000026 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0927009 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 66 components and 0.0927009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084200Jy sigma=0.000675 ! Fit after self-cal, rms=0.084106Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 1.02 KP 0.98 ! LA 0.90 MK 1.17 NL 1.01 OV 0.98 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 2. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.16 KP 0.95 ! LA 0.86 MK 1.19 NL 1.09 OV 1.03 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 3. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.12 KP 0.97 ! LA 0.93 MK 1.16 NL 1.13 OV 0.96 ! PT 0.87 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 1.01 KP 1.00* ! LA 0.85 MK 1.03 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.084106Jy sigma=0.000674 ! Fit after self-cal, rms=0.084265Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.104 mas, bmaj=7.329 mas, bpa=11.42 degrees ! Estimated noise=517.042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342351 Jy ! Component: 100 - total flux cleaned = 0.00584015 Jy ! Component: 150 - total flux cleaned = 0.00769191 Jy ! Component: 200 - total flux cleaned = 0.00897566 Jy ! Total flux subtracted in 200 components = 0.00897566 Jy ! Clean residual min=-0.002543 max=0.003339 Jy/beam ! Clean residual mean=0.000019 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.101677 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 101 components and 0.101677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084111Jy sigma=0.000671 ! Fit after self-cal, rms=0.084193Jy sigma=0.000670 ! Inverting map ! Added new window around map position (67.5, 97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030321 Jy ! Component: 100 - total flux cleaned = 0.00478866 Jy ! Component: 150 - total flux cleaned = 0.00611201 Jy ! Component: 200 - total flux cleaned = 0.0069435 Jy ! Total flux subtracted in 200 components = 0.0069435 Jy ! Clean residual min=-0.002229 max=0.002154 Jy/beam ! Clean residual mean=0.000015 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.10862 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 129 components and 0.10862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084074Jy sigma=0.000669 ! Fit after self-cal, rms=0.084056Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084056Jy sigma=0.000668 ! Fit after self-cal, rms=0.082822Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.095 mas, bmaj=7.292 mas, bpa=11.12 degrees ! Estimated noise=517.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145084 Jy ! Component: 100 - total flux cleaned = 0.00250945 Jy ! Component: 150 - total flux cleaned = 0.0032897 Jy ! Component: 200 - total flux cleaned = 0.00379673 Jy ! Total flux subtracted in 200 components = 0.00379673 Jy ! Clean residual min=-0.002038 max=0.002024 Jy/beam ! Clean residual mean=0.000006 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.112417 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 156 components and 0.112417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082789Jy sigma=0.000666 ! Fit after self-cal, rms=0.082787Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (65.5, 65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016867 Jy ! Component: 100 - total flux cleaned = 0.00228483 Jy ! Component: 150 - total flux cleaned = 0.00281718 Jy ! Component: 200 - total flux cleaned = 0.00323823 Jy ! Total flux subtracted in 200 components = 0.00323823 Jy ! Clean residual min=-0.001784 max=0.001863 Jy/beam ! Clean residual mean=0.000005 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.115655 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 174 components and 0.115655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082747Jy sigma=0.000666 ! Fit after self-cal, rms=0.082739Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082739Jy sigma=0.000666 ! Fit after self-cal, rms=0.082573Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=7.286 mas, bpa=11.12 degrees ! Estimated noise=517.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090149 Jy ! Component: 100 - total flux cleaned = 0.00157992 Jy ! Component: 150 - total flux cleaned = 0.00207554 Jy ! Component: 200 - total flux cleaned = 0.00237175 Jy ! Total flux subtracted in 200 components = 0.00237175 Jy ! Clean residual min=-0.001726 max=0.001742 Jy/beam ! Clean residual mean=0.000005 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.118027 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 183 components and 0.118027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082556Jy sigma=0.000665 ! Fit after self-cal, rms=0.082553Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429148 Jy ! Component: 100 - total flux cleaned = 0.000607179 Jy ! Component: 150 - total flux cleaned = 0.000774325 Jy ! Component: 200 - total flux cleaned = 0.000913757 Jy ! Total flux subtracted in 200 components = 0.000913757 Jy ! Clean residual min=-0.001676 max=0.001686 Jy/beam ! Clean residual mean=0.000005 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.11894 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 0.11894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082544Jy sigma=0.000665 ! Fit after self-cal, rms=0.082544Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082544Jy sigma=0.000665 ! Fit after self-cal, rms=0.082502Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.787 mas, bmaj=9.635 mas, bpa=4.579 degrees ! Estimated noise=587.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105834 Jy ! Component: 100 - total flux cleaned = 0.00170789 Jy ! Component: 150 - total flux cleaned = 0.00202572 Jy ! Component: 200 - total flux cleaned = 0.00227998 Jy ! Total flux subtracted in 200 components = 0.00227998 Jy ! Clean residual min=-0.002035 max=0.001900 Jy/beam ! Clean residual mean=0.000009 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.12122 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 205 components and 0.12122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082501Jy sigma=0.000665 ! Fit after self-cal, rms=0.082499Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325122 Jy ! Component: 100 - total flux cleaned = 0.00057619 Jy ! Component: 150 - total flux cleaned = 0.000762196 Jy ! Component: 200 - total flux cleaned = 0.000854238 Jy ! Total flux subtracted in 200 components = 0.000854238 Jy ! Clean residual min=-0.001989 max=0.001910 Jy/beam ! Clean residual mean=0.000009 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.122075 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 212 components and 0.122075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082500Jy sigma=0.000665 ! Fit after self-cal, rms=0.082499Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=7.285 mas, bpa=11.13 degrees ! Estimated noise=517.202 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.087 x 7.285 at 11.13 degrees (North through East) ! Clean map min=-0.0015981 max=0.072049 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=6.51 mas, bpa=11.09 degrees ! Estimated noise=869.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557745 Jy ! Component: 100 - total flux cleaned = 0.068453 Jy ! Component: 150 - total flux cleaned = 0.0747579 Jy ! Component: 200 - total flux cleaned = 0.0797639 Jy ! Total flux subtracted in 200 components = 0.0797639 Jy ! Clean residual min=-0.003105 max=0.003682 Jy/beam ! Clean residual mean=0.000006 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.0797639 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0797639 Jy ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=7.285 mas, bpa=11.13 degrees ! Estimated noise=517.202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649311 Jy ! Component: 100 - total flux cleaned = 0.0114298 Jy ! Component: 150 - total flux cleaned = 0.0154884 Jy ! Component: 200 - total flux cleaned = 0.0188756 Jy ! Total flux subtracted in 200 components = 0.0188756 Jy ! Clean residual min=-0.002628 max=0.003228 Jy/beam ! Clean residual mean=0.000014 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0986396 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 107 components and 0.0986396 Jy ! Inverting map ! Added new window around map position (7, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318637 Jy ! Component: 100 - total flux cleaned = 0.00563285 Jy ! Component: 150 - total flux cleaned = 0.00774336 Jy ! Component: 200 - total flux cleaned = 0.00959946 Jy ! Total flux subtracted in 200 components = 0.00959946 Jy ! Clean residual min=-0.002159 max=0.001761 Jy/beam ! Clean residual mean=0.000012 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.108239 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 165 components and 0.108239 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.787 mas, bmaj=9.635 mas, bpa=4.579 degrees ! Estimated noise=587.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270437 Jy ! Component: 100 - total flux cleaned = 0.00477942 Jy ! Component: 150 - total flux cleaned = 0.00651482 Jy ! Component: 200 - total flux cleaned = 0.00797862 Jy ! Total flux subtracted in 200 components = 0.00797862 Jy ! Clean residual min=-0.002371 max=0.001965 Jy/beam ! Clean residual mean=0.000015 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.116218 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123908 Jy ! Component: 100 - total flux cleaned = 0.00229127 Jy ! Component: 150 - total flux cleaned = 0.00318824 Jy ! Component: 200 - total flux cleaned = 0.00395971 Jy ! Total flux subtracted in 200 components = 0.00395971 Jy ! Clean residual min=-0.002126 max=0.001821 Jy/beam ! Clean residual mean=0.000011 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.120177 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 269 components and 0.120177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=7.285 mas, bpa=11.13 degrees ! Estimated noise=517.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049403 Jy ! Component: 100 - total flux cleaned = 0.000771267 Jy ! Component: 150 - total flux cleaned = 0.000971194 Jy ! Component: 200 - total flux cleaned = 0.0011314 Jy ! Total flux subtracted in 200 components = 0.0011314 Jy ! Clean residual min=-0.001637 max=0.001469 Jy/beam ! Clean residual mean=0.000006 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.121309 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 295 components and 0.121309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082484Jy sigma=0.000665 ! Fit after self-cal, rms=0.082463Jy sigma=0.000665 wmodel J0037+3659_S_2017_05_01_pus_map.mod ! Writing 295 model components to file: J0037+3659_S_2017_05_01_pus_map.mod wobs J0037+3659_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0037+3659_S_2017_05_01_pus_uvs.fits wwins J0037+3659_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J0037+3659_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395099 Jy ! Component: 100 - total flux cleaned = -0.000581346 Jy ! Component: 150 - total flux cleaned = -0.000733228 Jy ! Component: 200 - total flux cleaned = -0.000926986 Jy ! Component: 250 - total flux cleaned = -0.00115976 Jy ! Component: 300 - total flux cleaned = -0.00133918 Jy ! Component: 350 - total flux cleaned = -0.00142583 Jy ! Component: 400 - total flux cleaned = -0.00146803 Jy ! Component: 450 - total flux cleaned = -0.00150915 Jy ! Component: 500 - total flux cleaned = -0.00152915 Jy ! Component: 550 - total flux cleaned = -0.00152906 Jy ! Component: 600 - total flux cleaned = -0.00156828 Jy ! Component: 650 - total flux cleaned = -0.00153013 Jy ! Component: 700 - total flux cleaned = -0.00158673 Jy ! Component: 750 - total flux cleaned = -0.0015312 Jy ! Component: 800 - total flux cleaned = -0.00153177 Jy ! Component: 850 - total flux cleaned = -0.00158543 Jy ! Component: 900 - total flux cleaned = -0.00156741 Jy ! Component: 950 - total flux cleaned = -0.00155009 Jy ! Component: 1000 - total flux cleaned = -0.00153314 Jy ! Component: 1050 - total flux cleaned = -0.00153262 Jy ! Component: 1100 - total flux cleaned = -0.00154894 Jy ! Component: 1150 - total flux cleaned = -0.0015163 Jy ! Component: 1200 - total flux cleaned = -0.00151663 Jy ! Component: 1250 - total flux cleaned = -0.00153282 Jy ! Component: 1300 - total flux cleaned = -0.00158008 Jy ! Component: 1350 - total flux cleaned = -0.00154909 Jy ! Component: 1400 - total flux cleaned = -0.00159534 Jy ! Component: 1450 - total flux cleaned = -0.00157998 Jy ! Component: 1500 - total flux cleaned = -0.00162497 Jy ! Component: 1550 - total flux cleaned = -0.00156537 Jy ! Component: 1600 - total flux cleaned = -0.00159477 Jy ! Component: 1650 - total flux cleaned = -0.00160941 Jy ! Component: 1700 - total flux cleaned = -0.0015662 Jy ! Component: 1750 - total flux cleaned = -0.00160868 Jy ! Component: 1800 - total flux cleaned = -0.00155258 Jy ! Component: 1850 - total flux cleaned = -0.0015667 Jy ! Component: 1900 - total flux cleaned = -0.0016079 Jy ! Component: 1950 - total flux cleaned = -0.0015944 Jy ! Component: 2000 - total flux cleaned = -0.0016617 Jy ! Component: 2050 - total flux cleaned = -0.00168863 Jy ! Component: 2100 - total flux cleaned = -0.00170185 Jy ! Component: 2150 - total flux cleaned = -0.0017806 Jy ! Component: 2200 - total flux cleaned = -0.0017803 Jy ! Component: 2250 - total flux cleaned = -0.00176751 Jy ! Component: 2300 - total flux cleaned = -0.00180587 Jy ! Component: 2350 - total flux cleaned = -0.00186918 Jy ! Component: 2400 - total flux cleaned = -0.00189428 Jy ! Component: 2450 - total flux cleaned = -0.00189442 Jy ! Component: 2500 - total flux cleaned = -0.00188213 Jy ! Component: 2550 - total flux cleaned = -0.00191865 Jy ! Component: 2600 - total flux cleaned = -0.00194299 Jy ! Component: 2650 - total flux cleaned = -0.00195481 Jy ! Component: 2700 - total flux cleaned = -0.00191915 Jy ! Component: 2750 - total flux cleaned = -0.00194281 Jy ! Component: 2800 - total flux cleaned = -0.00196643 Jy ! Component: 2850 - total flux cleaned = -0.00204797 Jy ! Component: 2900 - total flux cleaned = -0.00202465 Jy ! Component: 2950 - total flux cleaned = -0.00200177 Jy ! Component: 3000 - total flux cleaned = -0.00204727 Jy ! Component: 3050 - total flux cleaned = -0.0020471 Jy ! Component: 3100 - total flux cleaned = -0.00203562 Jy ! Component: 3150 - total flux cleaned = -0.00201313 Jy ! Component: 3200 - total flux cleaned = -0.00201307 Jy ! Component: 3250 - total flux cleaned = -0.00201309 Jy ! Component: 3300 - total flux cleaned = -0.00201318 Jy ! Component: 3350 - total flux cleaned = -0.00199144 Jy ! Component: 3400 - total flux cleaned = -0.00204515 Jy ! Component: 3450 - total flux cleaned = -0.00198115 Jy ! Component: 3500 - total flux cleaned = -0.00204479 Jy ! Component: 3550 - total flux cleaned = -0.0020448 Jy ! Component: 3600 - total flux cleaned = -0.00205524 Jy ! Component: 3650 - total flux cleaned = -0.00204471 Jy ! Component: 3700 - total flux cleaned = -0.00205488 Jy ! Component: 3750 - total flux cleaned = -0.00202416 Jy ! Component: 3800 - total flux cleaned = -0.00206482 Jy ! Component: 3850 - total flux cleaned = -0.00205471 Jy ! Component: 3900 - total flux cleaned = -0.00204473 Jy ! Component: 3950 - total flux cleaned = -0.0020548 Jy ! Component: 4000 - total flux cleaned = -0.00208439 Jy ! Component: 4050 - total flux cleaned = -0.00205492 Jy ! Total flux subtracted in 4096 components = -0.00207433 Jy ! Clean residual min=-0.000559 max=0.000534 Jy/beam ! Clean residual mean=0.000002 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.119234 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 607 components and 0.119234 Jy ![Exited script file: muppet] wmap "J0037+3659_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.087 x 7.285 at 11.13 degrees (North through East) ! Clean map min=-0.0011173 max=0.071502 Jy/beam ! Writing clean map to FITS file: J0037+3659_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0715019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018364 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.770496 0.770496 1.54099 3.08198 6.16397 12.3279 24.6559 49.3117 98.6235 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.087 x 7.285 at 11.13 degrees (North through East) ! Clean map min=-0.0011173 max=0.071502 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0037+3659_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:22:55 2019