! Started logfile: J0035+6130_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:27:40 2019 obs J0035+6130_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0035+6130_S_2017_03_27_pus_uva.fits ! AN table 1: 190 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972164 visibilities/baseline/integration-bin. ! Found source: J0035+6130 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 33248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0035+6130_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 763 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.933153Jy sigma=0.008102 ! Fit after self-cal, rms=0.921834Jy sigma=0.008022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=3.841 mas, bpa=-2.57 degrees ! Estimated noise=834.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0577302 Jy ! Component: 100 - total flux cleaned = 0.0773763 Jy ! Total flux subtracted in 100 components = 0.0773763 Jy ! Clean residual min=-0.003624 max=0.009405 Jy/beam ! Clean residual mean=-0.000047 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.0773763 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0773763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086959Jy sigma=0.000694 ! Fit after self-cal, rms=0.086898Jy sigma=0.000693 ! Inverting map ! Added new window around map position (-4, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106936 Jy ! Component: 100 - total flux cleaned = 0.0171669 Jy ! Total flux subtracted in 100 components = 0.0171669 Jy ! Clean residual min=-0.002907 max=0.004373 Jy/beam ! Clean residual mean=-0.000027 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0945433 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.0945433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085071Jy sigma=0.000674 ! Fit after self-cal, rms=0.085056Jy sigma=0.000674 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503394 Jy ! Component: 100 - total flux cleaned = 0.00830186 Jy ! Total flux subtracted in 100 components = 0.00830186 Jy ! Clean residual min=-0.002967 max=0.004052 Jy/beam ! Clean residual mean=-0.000017 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.102845 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.102845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084637Jy sigma=0.000669 ! Fit after self-cal, rms=0.084625Jy sigma=0.000669 ! Inverting map ! Added new window around map position (-11, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388866 Jy ! Component: 100 - total flux cleaned = 0.0064527 Jy ! Total flux subtracted in 100 components = 0.0064527 Jy ! Clean residual min=-0.002822 max=0.002504 Jy/beam ! Clean residual mean=-0.000011 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.109298 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.109298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084387Jy sigma=0.000666 ! Fit after self-cal, rms=0.084377Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=4.692 mas, bpa=2.24 degrees ! Estimated noise=494.543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336264 Jy ! Component: 100 - total flux cleaned = 0.00541932 Jy ! Component: 150 - total flux cleaned = 0.0068727 Jy ! Component: 200 - total flux cleaned = 0.00792058 Jy ! Total flux subtracted in 200 components = 0.00792058 Jy ! Clean residual min=-0.001522 max=0.001510 Jy/beam ! Clean residual mean=-0.000005 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.117218 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 83 components and 0.117218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084231Jy sigma=0.000665 ! Fit after self-cal, rms=0.084228Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.09 KP 1.04 ! LA 1.00 MK 1.19 NL 1.00 OV 1.01 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.05 KP 0.97 ! LA 0.97 MK 1.03 NL 1.00 OV 1.03 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.06 HN 1.00 KP 0.98 ! LA 0.96 MK 1.05 NL 0.99 OV 0.95 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.00* ! LA 0.99 MK 0.88 NL 1.00* OV 1.22 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.084228Jy sigma=0.000665 ! Fit after self-cal, rms=0.086626Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.013 mas, bmaj=4.738 mas, bpa=2.912 degrees ! Estimated noise=497.827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986349 Jy ! Component: 100 - total flux cleaned = 0.00129976 Jy ! Component: 150 - total flux cleaned = 0.00133 Jy ! Component: 200 - total flux cleaned = 0.00134262 Jy ! Total flux subtracted in 200 components = 0.00134262 Jy ! Clean residual min=-0.001441 max=0.001380 Jy/beam ! Clean residual mean=0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.118561 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.118561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086613Jy sigma=0.000663 ! Fit after self-cal, rms=0.086668Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086668Jy sigma=0.000663 ! Fit after self-cal, rms=0.088274Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.013 mas, bmaj=4.739 mas, bpa=2.301 degrees ! Estimated noise=498.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372038 Jy ! Component: 100 - total flux cleaned = 0.000538467 Jy ! Component: 150 - total flux cleaned = 0.000618293 Jy ! Component: 200 - total flux cleaned = 0.000651839 Jy ! Total flux subtracted in 200 components = 0.000651839 Jy ! Clean residual min=-0.001459 max=0.001442 Jy/beam ! Clean residual mean=0.000012 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.119213 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.119213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088267Jy sigma=0.000661 ! Fit after self-cal, rms=0.088291Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123024 Jy ! Component: 100 - total flux cleaned = 0.000167356 Jy ! Component: 150 - total flux cleaned = 0.000167517 Jy ! Component: 200 - total flux cleaned = 0.000167703 Jy ! Total flux subtracted in 200 components = 0.000167703 Jy ! Clean residual min=-0.001445 max=0.001431 Jy/beam ! Clean residual mean=0.000012 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.119381 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.119381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088288Jy sigma=0.000661 ! Fit after self-cal, rms=0.088288Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088288Jy sigma=0.000661 ! Fit after self-cal, rms=0.088943Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.018 mas, bmaj=4.737 mas, bpa=2.06 degrees ! Estimated noise=498.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220433 Jy ! Component: 100 - total flux cleaned = 0.000300951 Jy ! Component: 150 - total flux cleaned = 0.000329877 Jy ! Component: 200 - total flux cleaned = 0.000330188 Jy ! Total flux subtracted in 200 components = 0.000330188 Jy ! Clean residual min=-0.001468 max=0.001461 Jy/beam ! Clean residual mean=0.000011 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.119711 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.119711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088939Jy sigma=0.000661 ! Fit after self-cal, rms=0.088940Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.07438e-05 Jy ! Component: 100 - total flux cleaned = 6.91132e-05 Jy ! Component: 150 - total flux cleaned = 5.36396e-05 Jy ! Component: 200 - total flux cleaned = 5.32372e-05 Jy ! Total flux subtracted in 200 components = 5.32372e-05 Jy ! Clean residual min=-0.001466 max=0.001456 Jy/beam ! Clean residual mean=0.000012 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.119764 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.119764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088938Jy sigma=0.000661 ! Fit after self-cal, rms=0.088938Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088938Jy sigma=0.000661 ! Fit after self-cal, rms=0.089115Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.383 mas, bmaj=8.736 mas, bpa=51.81 degrees ! Estimated noise=612.351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045581 Jy ! Component: 100 - total flux cleaned = 0.000501862 Jy ! Component: 150 - total flux cleaned = 0.00050694 Jy ! Component: 200 - total flux cleaned = 0.000511901 Jy ! Total flux subtracted in 200 components = 0.000511901 Jy ! Clean residual min=-0.001356 max=0.001352 Jy/beam ! Clean residual mean=0.000026 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.120276 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 112 components and 0.120276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089116Jy sigma=0.000661 ! Fit after self-cal, rms=0.089116Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.03826e-05 Jy ! Component: 100 - total flux cleaned = 0.000109647 Jy ! Component: 150 - total flux cleaned = 0.0001142 Jy ! Component: 200 - total flux cleaned = 0.00012248 Jy ! Total flux subtracted in 200 components = 0.00012248 Jy ! Clean residual min=-0.001362 max=0.001337 Jy/beam ! Clean residual mean=0.000026 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.120398 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 113 components and 0.120398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089117Jy sigma=0.000661 ! Fit after self-cal, rms=0.089117Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=4.734 mas, bpa=1.892 degrees ! Estimated noise=499.417 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 4.734 at 1.892 degrees (North through East) ! Clean map min=-0.0014303 max=0.077715 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=3.873 mas, bpa=-2.189 degrees ! Estimated noise=848.397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578966 Jy ! Component: 100 - total flux cleaned = 0.0785831 Jy ! Component: 150 - total flux cleaned = 0.089686 Jy ! Component: 200 - total flux cleaned = 0.0970192 Jy ! Total flux subtracted in 200 components = 0.0970192 Jy ! Clean residual min=-0.002942 max=0.004085 Jy/beam ! Clean residual mean=-0.000017 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0970192 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0970192 Jy ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=4.734 mas, bpa=1.892 degrees ! Estimated noise=499.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759306 Jy ! Component: 100 - total flux cleaned = 0.0122855 Jy ! Component: 150 - total flux cleaned = 0.015482 Jy ! Component: 200 - total flux cleaned = 0.0177119 Jy ! Total flux subtracted in 200 components = 0.0177119 Jy ! Clean residual min=-0.001800 max=0.001554 Jy/beam ! Clean residual mean=0.000004 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.114731 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 80 components and 0.114731 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.383 mas, bmaj=8.736 mas, bpa=51.81 degrees ! Estimated noise=612.351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245939 Jy ! Component: 100 - total flux cleaned = 0.00375203 Jy ! Component: 150 - total flux cleaned = 0.00451583 Jy ! Component: 200 - total flux cleaned = 0.00497238 Jy ! Total flux subtracted in 200 components = 0.00497238 Jy ! Clean residual min=-0.001365 max=0.001293 Jy/beam ! Clean residual mean=0.000024 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.119704 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273721 Jy ! Component: 100 - total flux cleaned = 0.000432795 Jy ! Component: 150 - total flux cleaned = 0.000452723 Jy ! Component: 200 - total flux cleaned = 0.000475999 Jy ! Total flux subtracted in 200 components = 0.000475999 Jy ! Clean residual min=-0.001349 max=0.001316 Jy/beam ! Clean residual mean=0.000026 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.12018 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 125 components and 0.12018 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=4.734 mas, bpa=1.892 degrees ! Estimated noise=499.417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249222 Jy ! Component: 100 - total flux cleaned = -0.000290765 Jy ! Component: 150 - total flux cleaned = -0.000292625 Jy ! Component: 200 - total flux cleaned = -0.000277647 Jy ! Total flux subtracted in 200 components = -0.000277647 Jy ! Clean residual min=-0.001557 max=0.001413 Jy/beam ! Clean residual mean=0.000011 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.119902 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 132 components and 0.119902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089129Jy sigma=0.000661 ! Fit after self-cal, rms=0.089116Jy sigma=0.000661 wmodel J0035+6130_S_2017_03_27_pus_map.mod ! Writing 132 model components to file: J0035+6130_S_2017_03_27_pus_map.mod wobs J0035+6130_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0035+6130_S_2017_03_27_pus_uvs.fits wwins J0035+6130_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0035+6130_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021692 Jy ! Component: 100 - total flux cleaned = -0.000400192 Jy ! Component: 150 - total flux cleaned = -0.000617439 Jy ! Component: 200 - total flux cleaned = -0.00070125 Jy ! Component: 250 - total flux cleaned = -0.000761944 Jy ! Component: 300 - total flux cleaned = -0.000741859 Jy ! Component: 350 - total flux cleaned = -0.000722371 Jy ! Component: 400 - total flux cleaned = -0.000760213 Jy ! Component: 450 - total flux cleaned = -0.000685596 Jy ! Component: 500 - total flux cleaned = -0.000704183 Jy ! Component: 550 - total flux cleaned = -0.000686321 Jy ! Component: 600 - total flux cleaned = -0.000721878 Jy ! Component: 650 - total flux cleaned = -0.000721844 Jy ! Component: 700 - total flux cleaned = -0.000756328 Jy ! Component: 750 - total flux cleaned = -0.000739565 Jy ! Component: 800 - total flux cleaned = -0.000739748 Jy ! Component: 850 - total flux cleaned = -0.000723166 Jy ! Component: 900 - total flux cleaned = -0.000739571 Jy ! Component: 950 - total flux cleaned = -0.000691157 Jy ! Component: 1000 - total flux cleaned = -0.000659439 Jy ! Component: 1050 - total flux cleaned = -0.000691089 Jy ! Component: 1100 - total flux cleaned = -0.000659818 Jy ! Component: 1150 - total flux cleaned = -0.000644502 Jy ! Component: 1200 - total flux cleaned = -0.000690444 Jy ! Component: 1250 - total flux cleaned = -0.000750944 Jy ! Component: 1300 - total flux cleaned = -0.000720945 Jy ! Component: 1350 - total flux cleaned = -0.000720939 Jy ! Component: 1400 - total flux cleaned = -0.000720912 Jy ! Component: 1450 - total flux cleaned = -0.000721037 Jy ! Component: 1500 - total flux cleaned = -0.000706377 Jy ! Component: 1550 - total flux cleaned = -0.000677778 Jy ! Component: 1600 - total flux cleaned = -0.000663529 Jy ! Component: 1650 - total flux cleaned = -0.000621138 Jy ! Component: 1700 - total flux cleaned = -0.000621152 Jy ! Component: 1750 - total flux cleaned = -0.000621114 Jy ! Component: 1800 - total flux cleaned = -0.000579891 Jy ! Component: 1850 - total flux cleaned = -0.000566383 Jy ! Component: 1900 - total flux cleaned = -0.000606947 Jy ! Component: 1950 - total flux cleaned = -0.000579998 Jy ! Component: 2000 - total flux cleaned = -0.000579967 Jy ! Component: 2050 - total flux cleaned = -0.000619531 Jy ! Component: 2100 - total flux cleaned = -0.000593105 Jy ! Component: 2150 - total flux cleaned = -0.000606066 Jy ! Component: 2200 - total flux cleaned = -0.000606133 Jy ! Component: 2250 - total flux cleaned = -0.000631873 Jy ! Component: 2300 - total flux cleaned = -0.000618982 Jy ! Component: 2350 - total flux cleaned = -0.000606102 Jy ! Component: 2400 - total flux cleaned = -0.000644004 Jy ! Component: 2450 - total flux cleaned = -0.000656604 Jy ! Component: 2500 - total flux cleaned = -0.000656544 Jy ! Component: 2550 - total flux cleaned = -0.000681436 Jy ! Component: 2600 - total flux cleaned = -0.000718411 Jy ! Component: 2650 - total flux cleaned = -0.000706105 Jy ! Component: 2700 - total flux cleaned = -0.000718349 Jy ! Component: 2750 - total flux cleaned = -0.000706181 Jy ! Component: 2800 - total flux cleaned = -0.000706221 Jy ! Component: 2850 - total flux cleaned = -0.000742133 Jy ! Component: 2900 - total flux cleaned = -0.000765955 Jy ! Component: 2950 - total flux cleaned = -0.000777765 Jy ! Component: 3000 - total flux cleaned = -0.000742469 Jy ! Component: 3050 - total flux cleaned = -0.000777551 Jy ! Component: 3100 - total flux cleaned = -0.000789158 Jy ! Component: 3150 - total flux cleaned = -0.00081233 Jy ! Component: 3200 - total flux cleaned = -0.000800842 Jy ! Component: 3250 - total flux cleaned = -0.000858059 Jy ! Component: 3300 - total flux cleaned = -0.000823918 Jy ! Component: 3350 - total flux cleaned = -0.000880565 Jy ! Component: 3400 - total flux cleaned = -0.000857982 Jy ! Component: 3450 - total flux cleaned = -0.000835484 Jy ! Component: 3500 - total flux cleaned = -0.000869045 Jy ! Component: 3550 - total flux cleaned = -0.000869071 Jy ! Component: 3600 - total flux cleaned = -0.000869064 Jy ! Component: 3650 - total flux cleaned = -0.000869013 Jy ! Component: 3700 - total flux cleaned = -0.000923754 Jy ! Component: 3750 - total flux cleaned = -0.000901896 Jy ! Component: 3800 - total flux cleaned = -0.000858453 Jy ! Component: 3850 - total flux cleaned = -0.000836883 Jy ! Component: 3900 - total flux cleaned = -0.000858428 Jy ! Component: 3950 - total flux cleaned = -0.000847719 Jy ! Component: 4000 - total flux cleaned = -0.000847774 Jy ! Component: 4050 - total flux cleaned = -0.000847814 Jy ! Total flux subtracted in 4096 components = -0.000847775 Jy ! Clean residual min=-0.000689 max=0.000649 Jy/beam ! Clean residual mean=0.000006 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.119054 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 431 components and 0.119054 Jy ![Exited script file: muppet] wmap "J0035+6130_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 4.734 at 1.892 degrees (North through East) ! Clean map min=-0.0011299 max=0.07784 Jy/beam ! Writing clean map to FITS file: J0035+6130_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0778397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192583 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.74223 0.74223 1.48446 2.96892 5.93784 11.8757 23.7514 47.5028 95.0055 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 4.734 at 1.892 degrees (North through East) ! Clean map min=-0.0011299 max=0.07784 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0035+6130_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:27:48 2019