! Started logfile: J0034-0054_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:45 2019 obs J0034-0054_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0034-0054_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.910526 visibilities/baseline/integration-bin. ! Found source: J0034-0054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0034-0054_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 424 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943649Jy sigma=0.007456 ! Fit after self-cal, rms=0.926854Jy sigma=0.007361 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.236 mas, bpa=-3.063 degrees ! Estimated noise=1253.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0588033 Jy ! Component: 100 - total flux cleaned = 0.0734251 Jy ! Total flux subtracted in 100 components = 0.0734251 Jy ! Clean residual min=-0.004581 max=0.006139 Jy/beam ! Clean residual mean=0.000017 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.0734252 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0734252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097244Jy sigma=0.000679 ! Fit after self-cal, rms=0.097193Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.398 mas, bpa=-3.621 degrees ! Estimated noise=940.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774447 Jy ! Component: 100 - total flux cleaned = 0.0111222 Jy ! Component: 150 - total flux cleaned = 0.0127523 Jy ! Component: 200 - total flux cleaned = 0.0128397 Jy ! Total flux subtracted in 200 components = 0.0128397 Jy ! Clean residual min=-0.002711 max=0.003064 Jy/beam ! Clean residual mean=0.000010 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0862649 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.0862649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096597Jy sigma=0.000674 ! Fit after self-cal, rms=0.096595Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.95 HN 0.98 KP 1.00 ! LA 1.07 MK 1.16 NL 0.88 OV 1.06 ! PT 1.06 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.98 HN 1.17 KP 0.92 ! LA 0.99 MK 0.94 NL 1.02 OV 1.10 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.03 KP 0.99 ! LA 1.00 MK 1.03 NL 1.01 OV 0.98 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.78 KP 1.00* ! LA 0.91 MK 0.97 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.096595Jy sigma=0.000674 ! Fit after self-cal, rms=0.096634Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=8.352 mas, bpa=-3.219 degrees ! Estimated noise=942.437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267387 Jy ! Component: 100 - total flux cleaned = 0.000215324 Jy ! Component: 150 - total flux cleaned = 0.000170374 Jy ! Component: 200 - total flux cleaned = 0.000130109 Jy ! Total flux subtracted in 200 components = 0.000130109 Jy ! Clean residual min=-0.002581 max=0.002590 Jy/beam ! Clean residual mean=0.000010 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.086395 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.086395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096614Jy sigma=0.000671 ! Fit after self-cal, rms=0.096593Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096593Jy sigma=0.000671 ! Fit after self-cal, rms=0.095247Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.335 mas, bpa=-3.234 degrees ! Estimated noise=939.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202285 Jy ! Component: 100 - total flux cleaned = 9.31975e-05 Jy ! Component: 150 - total flux cleaned = 5.89827e-05 Jy ! Component: 200 - total flux cleaned = 5.94476e-05 Jy ! Total flux subtracted in 200 components = 5.94476e-05 Jy ! Clean residual min=-0.002253 max=0.002473 Jy/beam ! Clean residual mean=0.000007 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0864544 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0864544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095237Jy sigma=0.000669 ! Fit after self-cal, rms=0.095255Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104198 Jy ! Component: 100 - total flux cleaned = -0.000190995 Jy ! Component: 150 - total flux cleaned = -0.000190798 Jy ! Component: 200 - total flux cleaned = -0.000191162 Jy ! Total flux subtracted in 200 components = -0.000191162 Jy ! Clean residual min=-0.002279 max=0.002492 Jy/beam ! Clean residual mean=0.000007 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0862633 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0862633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095249Jy sigma=0.000668 ! Fit after self-cal, rms=0.095245Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095245Jy sigma=0.000668 ! Fit after self-cal, rms=0.096268Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=8.332 mas, bpa=-3.242 degrees ! Estimated noise=945.533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438456 Jy ! Component: 100 - total flux cleaned = 0.000509469 Jy ! Component: 150 - total flux cleaned = 0.00049639 Jy ! Component: 200 - total flux cleaned = 0.000472304 Jy ! Total flux subtracted in 200 components = 0.000472304 Jy ! Clean residual min=-0.002254 max=0.002511 Jy/beam ! Clean residual mean=0.000007 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0867356 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0867356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096261Jy sigma=0.000668 ! Fit after self-cal, rms=0.096284Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.87112e-05 Jy ! Component: 100 - total flux cleaned = -0.000105125 Jy ! Component: 150 - total flux cleaned = -0.000105526 Jy ! Component: 200 - total flux cleaned = -0.000126052 Jy ! Total flux subtracted in 200 components = -0.000126052 Jy ! Clean residual min=-0.002265 max=0.002533 Jy/beam ! Clean residual mean=0.000007 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0866095 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.0866095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096280Jy sigma=0.000668 ! Fit after self-cal, rms=0.096276Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096276Jy sigma=0.000668 ! Fit after self-cal, rms=0.097082Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.48 mas, bmaj=13.83 mas, bpa=-4.445 degrees ! Estimated noise=1168.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569656 Jy ! Component: 100 - total flux cleaned = 0.000597645 Jy ! Component: 150 - total flux cleaned = 0.000606836 Jy ! Component: 200 - total flux cleaned = 0.000606554 Jy ! Total flux subtracted in 200 components = 0.000606554 Jy ! Clean residual min=-0.002940 max=0.002467 Jy/beam ! Clean residual mean=0.000013 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.0872161 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0872161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097083Jy sigma=0.000668 ! Fit after self-cal, rms=0.097085Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.46376e-05 Jy ! Component: 100 - total flux cleaned = -1.19902e-05 Jy ! Component: 150 - total flux cleaned = -1.2384e-05 Jy ! Component: 200 - total flux cleaned = -5.12166e-06 Jy ! Total flux subtracted in 200 components = -5.12166e-06 Jy ! Clean residual min=-0.002951 max=0.002467 Jy/beam ! Clean residual mean=0.000013 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.087211 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.087211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097085Jy sigma=0.000668 ! Fit after self-cal, rms=0.097075Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.332 mas, bpa=-3.228 degrees ! Estimated noise=951.692 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 8.332 at -3.228 degrees (North through East) ! Clean map min=-0.002327 max=0.077334 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.234 mas, bpa=-2.889 degrees ! Estimated noise=1245.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0581225 Jy ! Component: 100 - total flux cleaned = 0.0740008 Jy ! Component: 150 - total flux cleaned = 0.0816246 Jy ! Component: 200 - total flux cleaned = 0.0853053 Jy ! Total flux subtracted in 200 components = 0.0853053 Jy ! Clean residual min=-0.003968 max=0.003285 Jy/beam ! Clean residual mean=0.000007 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.0853053 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0853053 Jy ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.332 mas, bpa=-3.228 degrees ! Estimated noise=951.692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155717 Jy ! Component: 100 - total flux cleaned = 0.00175306 Jy ! Component: 150 - total flux cleaned = 0.00175261 Jy ! Component: 200 - total flux cleaned = 0.00175193 Jy ! Total flux subtracted in 200 components = 0.00175193 Jy ! Clean residual min=-0.002394 max=0.002618 Jy/beam ! Clean residual mean=0.000007 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0870572 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.0870572 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.48 mas, bmaj=13.83 mas, bpa=-4.445 degrees ! Estimated noise=1168.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223546 Jy ! Component: 100 - total flux cleaned = 0.000227245 Jy ! Component: 150 - total flux cleaned = 0.000186193 Jy ! Component: 200 - total flux cleaned = 0.000165273 Jy ! Total flux subtracted in 200 components = 0.000165273 Jy ! Clean residual min=-0.002987 max=0.002488 Jy/beam ! Clean residual mean=0.000013 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0872225 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.65959e-05 Jy ! Component: 100 - total flux cleaned = -2.3832e-05 Jy ! Component: 150 - total flux cleaned = -3.02719e-05 Jy ! Component: 200 - total flux cleaned = -3.59696e-05 Jy ! Total flux subtracted in 200 components = -3.59696e-05 Jy ! Clean residual min=-0.002986 max=0.002478 Jy/beam ! Clean residual mean=0.000013 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.0871865 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.0871865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.332 mas, bpa=-3.228 degrees ! Estimated noise=951.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.97345e-05 Jy ! Component: 100 - total flux cleaned = -2.16896e-05 Jy ! Component: 150 - total flux cleaned = -6.97898e-05 Jy ! Component: 200 - total flux cleaned = -0.00013636 Jy ! Total flux subtracted in 200 components = -0.00013636 Jy ! Clean residual min=-0.002391 max=0.002635 Jy/beam ! Clean residual mean=0.000007 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0870501 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.0870501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097077Jy sigma=0.000668 ! Fit after self-cal, rms=0.097076Jy sigma=0.000668 wmodel J0034-0054_S_2017_05_27_pus_map.mod ! Writing 56 model components to file: J0034-0054_S_2017_05_27_pus_map.mod wobs J0034-0054_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0034-0054_S_2017_05_27_pus_uvs.fits wwins J0034-0054_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0034-0054_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350036 Jy ! Component: 100 - total flux cleaned = 0.000226902 Jy ! Component: 150 - total flux cleaned = 0.000187801 Jy ! Component: 200 - total flux cleaned = 6.6849e-07 Jy ! Component: 250 - total flux cleaned = -0.000108212 Jy ! Component: 300 - total flux cleaned = -0.000213872 Jy ! Component: 350 - total flux cleaned = -0.000247387 Jy ! Component: 400 - total flux cleaned = -0.000311826 Jy ! Component: 450 - total flux cleaned = -0.000342922 Jy ! Component: 500 - total flux cleaned = -0.000373919 Jy ! Component: 550 - total flux cleaned = -0.000373427 Jy ! Component: 600 - total flux cleaned = -0.000372741 Jy ! Component: 650 - total flux cleaned = -0.000283537 Jy ! Component: 700 - total flux cleaned = -0.000196737 Jy ! Component: 750 - total flux cleaned = -0.000253571 Jy ! Component: 800 - total flux cleaned = -0.000141263 Jy ! Component: 850 - total flux cleaned = -0.00011381 Jy ! Component: 900 - total flux cleaned = -3.20793e-05 Jy ! Component: 950 - total flux cleaned = -5.84439e-05 Jy ! Component: 1000 - total flux cleaned = 4.70386e-05 Jy ! Component: 1050 - total flux cleaned = 0.000125213 Jy ! Component: 1100 - total flux cleaned = 0.000226947 Jy ! Component: 1150 - total flux cleaned = 0.000151138 Jy ! Component: 1200 - total flux cleaned = 0.000176006 Jy ! Component: 1250 - total flux cleaned = 0.000225562 Jy ! Component: 1300 - total flux cleaned = 0.00032199 Jy ! Component: 1350 - total flux cleaned = 0.000369038 Jy ! Component: 1400 - total flux cleaned = 0.000392011 Jy ! Component: 1450 - total flux cleaned = 0.000392041 Jy ! Component: 1500 - total flux cleaned = 0.000414997 Jy ! Component: 1550 - total flux cleaned = 0.000505255 Jy ! Component: 1600 - total flux cleaned = 0.000616596 Jy ! Component: 1650 - total flux cleaned = 0.000594264 Jy ! Component: 1700 - total flux cleaned = 0.000703226 Jy ! Component: 1750 - total flux cleaned = 0.000746195 Jy ! Component: 1800 - total flux cleaned = 0.000830864 Jy ! Component: 1850 - total flux cleaned = 0.000851696 Jy ! Component: 1900 - total flux cleaned = 0.000893541 Jy ! Component: 1950 - total flux cleaned = 0.000934406 Jy ! Component: 2000 - total flux cleaned = 0.000934494 Jy ! Component: 2050 - total flux cleaned = 0.000994496 Jy ! Component: 2100 - total flux cleaned = 0.00107351 Jy ! Component: 2150 - total flux cleaned = 0.00113202 Jy ! Component: 2200 - total flux cleaned = 0.00111275 Jy ! Component: 2250 - total flux cleaned = 0.00111264 Jy ! Component: 2300 - total flux cleaned = 0.00113167 Jy ! Component: 2350 - total flux cleaned = 0.0011317 Jy ! Component: 2400 - total flux cleaned = 0.00105799 Jy ! Component: 2450 - total flux cleaned = 0.00113154 Jy ! Component: 2500 - total flux cleaned = 0.00109528 Jy ! Component: 2550 - total flux cleaned = 0.00113124 Jy ! Component: 2600 - total flux cleaned = 0.00109578 Jy ! Component: 2650 - total flux cleaned = 0.00109614 Jy ! Component: 2700 - total flux cleaned = 0.0011482 Jy ! Component: 2750 - total flux cleaned = 0.00109617 Jy ! Component: 2800 - total flux cleaned = 0.00109637 Jy ! Component: 2850 - total flux cleaned = 0.00113053 Jy ! Component: 2900 - total flux cleaned = 0.00116406 Jy ! Component: 2950 - total flux cleaned = 0.00119722 Jy ! Component: 3000 - total flux cleaned = 0.00119727 Jy ! Component: 3050 - total flux cleaned = 0.00126259 Jy ! Component: 3100 - total flux cleaned = 0.0012462 Jy ! Component: 3150 - total flux cleaned = 0.00124642 Jy ! Component: 3200 - total flux cleaned = 0.00121452 Jy ! Component: 3250 - total flux cleaned = 0.00129397 Jy ! Component: 3300 - total flux cleaned = 0.00132535 Jy ! Component: 3350 - total flux cleaned = 0.00134098 Jy ! Component: 3400 - total flux cleaned = 0.00131014 Jy ! Component: 3450 - total flux cleaned = 0.00132536 Jy ! Component: 3500 - total flux cleaned = 0.00137128 Jy ! Component: 3550 - total flux cleaned = 0.00140155 Jy ! Component: 3600 - total flux cleaned = 0.00137145 Jy ! Component: 3650 - total flux cleaned = 0.0014312 Jy ! Component: 3700 - total flux cleaned = 0.00143135 Jy ! Component: 3750 - total flux cleaned = 0.0014316 Jy ! Component: 3800 - total flux cleaned = 0.00150463 Jy ! Component: 3850 - total flux cleaned = 0.00146107 Jy ! Component: 3900 - total flux cleaned = 0.00147548 Jy ! Component: 3950 - total flux cleaned = 0.00150416 Jy ! Component: 4000 - total flux cleaned = 0.00147579 Jy ! Component: 4050 - total flux cleaned = 0.00153218 Jy ! Total flux subtracted in 4096 components = 0.00151812 Jy ! Clean residual min=-0.001031 max=0.000821 Jy/beam ! Clean residual mean=0.000002 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0885683 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 330 components and 0.0885682 Jy ![Exited script file: muppet] wmap "J0034-0054_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 8.332 at -3.228 degrees (North through East) ! Clean map min=-0.0016755 max=0.077397 Jy/beam ! Writing clean map to FITS file: J0034-0054_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.077397 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000250384 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.970517 0.970517 1.94103 3.88207 7.76414 15.5283 31.0566 62.1131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 8.332 at -3.228 degrees (North through East) ! Clean map min=-0.0016755 max=0.077397 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0034-0054_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:49 2019